• 沒有找到結果。

products

Chapter 5 Assessment

This chapter discusses the role of assessment in learning and teaching Integrated Science, the principles that should guide assessment of the subject and the need for both formative and summative assessment. It also provides guidance on internal assessment and details of the public assessment of Integrated Science. Finally, information is given on how standards are established and maintained, and how results are reported with reference to these standards.

General guidance on assessment can be found in the Senior Secondary Curriculum Guide (SSCG) (CDC, 2009).

5.1 The Roles of Assessment

Assessment is the practice of collecting evidence of student learning. It is a vital and integral part of classroom instruction, and serves several purposes and audiences.

First and foremost, it gives feedback to students, teachers, schools and parents on the effectiveness of teaching and on students’ strengths and weaknesses in learning.

Second, it provides information to schools, school systems, government, tertiary institutions and employers to enable them to monitor standards and to facilitate selection decisions.

The most important role of assessment is in promoting learning and monitoring students’

progress. However, in the senior secondary years, the more public roles of assessment for certification and selection come to the fore. Inevitably, these imply high stake uses of assessment since the results are typically employed to make critical decisions about individuals that affect their future.

The Hong Kong Diploma of Secondary Education (HKDSE) provides a common end-of-school credential that gives access to university study, work, and further education and training. It summarises student performance in the four core subjects and in various elective subjects, including both discipline-oriented subjects such as Integrated Science and the new Applied Learning courses. It needs to be interpreted in conjunction with the other information about students as shown in the Student Learning Profile.

5.2 Formative and Summative Assessment

It is useful to distinguish between the two main purposes of assessment, namely ‘assessment for learning’ and ‘assessment of learning’.

‘Assessment for learning’ is concerned with obtaining feedback on learning and teaching, and utilising this to make learning more effective and to introduce any necessary changes to teaching strategies. We refer to this kind of assessment as ‘formative assessment’ because it is all about forming or shaping learning and teaching. Formative assessment should take place on a daily basis and typically involves close attention to small ‘chunks’ of learning.

‘Assessment of learning’ is concerned with determining progress in learning, and is referred to as ‘summative’ assessment because it is all about summarising how much learning has taken place. Summative assessment is normally undertaken at the conclusion of a significant period of instruction (e.g. at the end of the year, or of a Key Stage of schooling) and reviews much larger ‘chunks’ of learning.

In practice, a sharp distinction cannot always be made between formative and summative assessment, because the same assessment can in some circumstances serve both formative and summative purposes. Teachers can refer to the SSCG for further discussion of formative and summative assessment.

Formative assessment should be distinguished from continuous assessment. The former refers to the provision of feedback to improve learning and teaching based on formal or informal assessment of student performance, while the latter refers to the assessment of students’

on-going work and may involve no provision of feedback that helps to promote better learning and teaching. For example, accumulating results in class tests carried out on a weekly basis, without giving students constructive feedback, may neither be effective formative assessment nor meaningful summative assessment.

There are good educational reasons why formative assessment should be given more attention and accorded a higher status than summative assessment, on which schools tended to place a greater emphasis in the past. There is research evidence on the beneficial effects of formative assessment when used for refining instructional decision-making in teaching and generating feedback to improve learning. For this reason, the CDC report Learning to Learn – The Way Forward in Curriculum Development (CDC, 2001) recommended that there should be a change in assessment practices, with schools placing due emphasis on formative assessment

It is recognised, however, that the primary purpose of public assessment, which includes both public examinations and moderated school-based assessment (SBA), is to provide summative assessments of the learning of each student. While it is desirable that students are exposed to SBA tasks in a low-stakes context and benefit from practice and experience with the tasks (i.e.

for formative assessment purposes) without penalty, similar tasks will need to be administered subsequently as part of the public assessment to generate marks to summarise the learning of students (i.e. for summative assessment purposes).

Another distinction to be made is between internal assessment and public assessment.

Internal assessment refers to the assessment practices that teachers and schools employ as part of the ongoing learning and teaching process during the three years of senior secondary studies. In contrast, public assessment refers to the assessment conducted as part of the assessment process in place for all schools. Within the context of the HKDSE, public assessment includes both the public examinations and the moderated SBA conducted or supervised by the HKEAA. On balance, internal assessment should be more formative, whereas public assessment tends to be more summative. Nevertheless, this need not be seen as a simple dichotomy. The inclusion of SBA in public assessment is an attempt to enhance formative assessment or assessment for learning within the context of the HKDSE.

5.3 Assessment Objectives

The assessment objectives are closely aligned with the curriculum framework and the broad learning outcomes presented in earlier chapters.

The learning objectives to be assessed in Integrated Science are listed below:

(a) recall and show understanding of facts, concepts and principles of science, and the relationships between different topic areas in the curriculum framework;

(b) apply scientific knowledge, concepts and principles to explain phenomena and observations, and to solve problems;

(c) formulate working hypotheses, and plan and perform tests for them;

(d) demonstrate practical skills related to the study of science;

(e) present data in various forms, such as tables, graphs, charts, drawings, diagrams, and transpose them from one form into another;

(f) analyse and interpret both numerical and non-numerical data in forms such as continuous prose, diagrams, photographs, charts and graphs – and make inferences and logical deductions, and draw conclusions from them;

(h) select, synthesise and communicate ideas and information clearly, precisely and logically;

(i) demonstrate understanding of the applications of science to daily life and the contributions of science to the modern world;

(j) show awareness of the ethical, moral, social, economic and technological implications of science, and critically evaluate science-related issues; and (k) make suggestions, choices and judgments based on scientific knowledge and

principles.

5.4 Internal Assessment

This section presents guiding principles for the design of internal assessment and some common assessment practices for Integrated Science for use in schools. Some of these principles are common to both internal and public assessment.

5.4.1 Guiding principles

Internal assessment practices should be aligned with the curriculum, teaching progression, student abilities and school context. The information collected will help to motivate, promote and monitor student learning, and will also help teachers to find ways of promoting more effective learning and teaching.

(a) Alignment with the learning objectives

A range of assessment practices should be used to assess comprehensively the achievement of different learning objectives for whole-person development, which include: knowledge and understanding of principles and concepts in science; scientific skills and processes; and positive values and attitudes. The weighting given to different areas in assessment should be discussed and agreed among teachers. The assessment purposes and criteria should also be made known to students so that they can have a full understanding of what is expected of them.

(b) Catering for the range of student ability

Assessment at different levels of difficulty and in diverse modes should be used to cater for students with different aptitudes and abilities. This helps to ensure that the more able students are challenged to develop their full potential, and the less able ones are encouraged to sustain

(c) Tracking progress over time

As internal assessment should not be a one-off exercise, schools are encouraged to use practices that can track learning progress over time (e.g. portfolios). Assessment practices of this kind allow students to set their own incremental targets and manage their pace of learning, which will have a positive impact on their commitment to learn.

(d) Timely and encouraging feedback

Teachers should provide timely and encouraging feedback through a variety of means, such as constructive verbal comments during classroom activities and written remarks on assignments. Good feedback helps students to sustain their momentum in learning, and to identify their strengths and weaknesses.

(e) Making reference to the school’s context

As learning is more meaningful when the content or process is linked to a setting which is familiar to students, schools are encouraged to design some assessment tasks that make reference to the school’s own context (e.g. its location, relationship with the community, and mission).

(f) Making reference to current progress in student learning

Internal assessment tasks should be designed with reference to students’ current progress, as this helps to overcome obstacles that may have a cumulative negative impact on learning.

Teachers should be mindful in particular of concepts and skills which form the basis for further development in learning.

(g) Feedback from peers and from the students themselves

In addition to giving feedback, teachers should also provide opportunities for peer assessment and self-assessment in student learning. The former enables students to learn among themselves, and the latter promotes reflective thinking which is vital for students’ lifelong learning.

(h) Appropriate use of assessment information to provide feedback

Internal assessment provides a rich source of data for providing evidence-based feedback on learning in a formative manner.

5.4.2 Internal assessment practices

A range of assessment practices suited to Integrated Science, such as assignments, practical work and scientific investigations, oral questioning and projects, should be used to promote the attainment of the various learning outcomes. However, teachers should note that these practices should be an integral part of learning and teaching, not ‘add-on’ activities.

Assignments

Assignments are a valuable and widely used assessment tool that reflects students’ efforts, achievements, strengths and weaknesses over time. A variety of assignment tasks – such as exercises, essays, designing posters or leaflets, and model construction – can be used to allow students to demonstrate their understanding and creative ideas. The assignment tasks should be aligned with the learning objectives, teaching strategies and learning activities. Teachers can ask students to select a topic of interest, search for information, summarise their findings and devise their own ways of presenting their work (e.g. role-play, essays, poster designs or presentation slides). Teachers should pay close attention to students’ organisation of the materials, the language they use, the breadth and depth of their treatment, and the clarity with which they explain concepts. The scores or grades for assignments can be used as part of the record of students’ progress; and the comments on their work, with suggestions for improvement, provide valuable feedback to them. Assignments can also help in evaluating the effectiveness of teaching by providing feedback upon which teachers can set further operational targets for students and make reasonable adjustments in their teaching strategies.

Practical work and scientific investigations

Practical work and scientific investigations are common activities in the learning and teaching of science subjects. They offer students ‘hands-on’ experience of exploring, and opportunities to show their interest, ingenuity and perseverance. In scientific investigations, teachers can first pose a problem and ask students to devise a plan and suggest appropriate experimental procedures for solving it – and the design of the investigations can then be discussed and, if necessary, modified. During such sessions, teachers can observe students’

practical skills and provide feedback on how the experiment/investigation might be improved.

Marking students’ laboratory reports can provide a more complete picture of students’

understanding of the scientific concepts and principles involved, as well as their ability to handle and interpret data obtained in investigations.

Oral questioning

Oral questioning can provide teachers with specific information on how the students think in certain situations, as their responses often provide clues to their level of understanding, attitudes and abilities. Teachers can use a wide range of questions, from those which involve fact-finding, problem-posing, and reason-seeking to more demanding ones which promote higher levels of thinking and allow for a variety of acceptable responses. This can be a valuable supplement to conventional assessment methods.

Projects

A project can be any piece of extended work on any topic. Asking students to carry out project work provides an opportunity for them to study a topic of interest in depth. Teachers can set project work for students based on the activities suggested in each module, and develop appropriate criteria to assess the ideas being formed and skills being developed by students during the process.

5.5 Public Assessment

5.5.1 Guiding principles

Some principles guiding public assessment are outlined below for teachers’ reference.

(a) Alignment with the curriculum

The outcomes that are assessed and examined through the HKDSE should be aligned with the aims, objectives and intended learning outcomes of the senior secondary curriculum. To enhance the validity of public assessment, the assessment procedures should address the range of valued learning outcomes, and not just those that are assessable through external written examinations.

The public assessment for Integrated Science places emphasis on testing candidates’ ability to apply and integrate knowledge in authentic and novel situations. In addition, the SBA

component extends the public assessment to include valuable scientific investigative skills and generic skills.

(b) Fairness, objectivity and reliability

Students should be assessed in ways that are fair and are not biased against particular groups of students. A characteristic of fair assessment is that it is objective and under the control of an independent examining authority that is impartial and open to public scrutiny. Fairness also implies that assessments provide a reliable measure of each student’s performance in a given subject so that, if they were to be repeated, very similar results would be obtained.

(c) Inclusiveness

The assessments and examinations in the HKDSE aim to accommodate the full spectrum of student aptitude and ability.

The curriculum of Integrated Science is designed to build on the science knowledge students have gained in S1 to S3. It also strikes a balance between breadth and depth of scientific understanding, and between theoretical and applied learning. The public examination contains questions which test candidates’ knowledge of the foundations and selected areas in science, and assess higher-order thinking skills. At the same time, the SBA component offers room for a wide range of practical activities to cater for the differing preferences and readiness of students and/or schools.

(d) Standards-referencing

The reporting system is ‘standards-referenced’, i.e. student performance is matched against standards, which indicate what students have to know and be able to do to merit a certain level of performance. Level descriptors have been developed for Integrated Science to provide information about the typical performance of candidates at the different levels.

(e) Informativeness

The HKDSE qualification and the associated assessment and examinations system provide useful information to all parties. First, it provides feedback to students on their performance

to parents, tertiary institutions, employers and the public at large what it is that students know and are able to do, in terms of how their performance matches with the standards. Third, it facilitates selection decisions that are fair and defensible.

5.5.2 Assessment design

The table below shows the assessment design of the subject with effect from the 2016 HKDSE Examination. The assessment design is subject to continual refinement in the light of feedback from live examinations. Full details are provided in the Regulations and Assessment Frameworks for the year of the examination and other supplementary documents, which are available on the HKEAA website

(www.hkeaa.edu.hk/en/hkdse/assessment/assessment_framework/)

Component Weighting Duration

Public examination

Paper 1 Questions set on Compulsory part 45% 2 hours Paper 2

Section A Section B

Multiple-choice questions set on Compulsory part

Questions set on Elective part

15%

20%

1 hour 30 minutes

School-based Assessment (SBA) 20%

5.5.3 Public examinations

The overall aim of the public examination is to assess candidates’ knowledge and understanding in different areas of science, and their ability to apply this to familiar and unfamiliar situations.

Various kinds of items are used to assess students’ performance in a broad range of skills and abilities. The item types include multiple-choice questions, structured questions, data-response questions and short essays. Schools may refer to the live examination papers regarding the format of the examination and the standards at which the questions are pitched.

5.5.4 School-based assessment (SBA)

In the context of public assessment, SBA refers to assessments administered in schools and marked by the students’ own teachers. The primary rationale for SBA in Integrated Science is to enhance the validity of the assessment by including the assessment of students’ practical and generic skills.

There are, however, some additional reasons for SBA. For example, it reduces dependence on the results of public examinations, which may not always provide the most reliable indication of the actual abilities of candidates. Obtaining assessments based on student performance over an extended period of time and developed by those who know the students best – their subject teachers – provides a more reliable assessment of each student.

Another reason for including SBA is to promote a positive ‘backwash effect’ on students, teachers and school staff. Within Integrated Science, SBA can serve to motivate students by requiring them to engage in meaningful activities. For teachers, it can reinforce curriculum aims and good teaching practice, and provide structure and significance to an activity they are involved in on a daily basis, namely assessing their own students.

The SBA for Integrated Science covers the assessment of students’ performances in practical work in their S5 and S6 years of the course. Candidates are required to perform a stipulated amount of practical work, which may include designing experiments, reporting and interpreting experimental results, etc. The work should be integrated closely with the curriculum and form a part of the normal learning and teaching process.

It should be noted that SBA is not an ‘add-on’ element in the curriculum. The modes of SBA above are normal in-class and out-of-class activities suggested in the curriculum. The requirement to implement the SBA has taken into consideration the wide range of student ability, and efforts have been made to avoid unduly increasing the workload of both teachers and students. Detailed information on the requirements and implementation of the SBA and samples of assessment tasks are provided to teachers by the HKEAA.

5.5.5 Standards and the reporting of results

Standards-referenced reporting is adopted for the HKDSE. What this means is that candidates’ levels of performance are reported with reference to a set of standards as defined by cut scores on the mark scale for a given subject. Standards referencing relates to the way in which results are reported and does not involve any changes in how teachers or examiners mark student work. The set of standards for a given subject can be represented diagrammatically as shown in Figure 5.1.

相關文件