• 沒有找到結果。

多輸入多輸出的正交分頻多工之射頻系統整合平台設計

N/A
N/A
Protected

Academic year: 2021

Share "多輸入多輸出的正交分頻多工之射頻系統整合平台設計"

Copied!
45
0
0

加載中.... (立即查看全文)

全文

Loading

數據

Figure 2-2 MIMO-OFDM基本接收端結構
Figure 3-1 FPGA模組系統介面
Figure 3-2 Barker Code 的 Cross Correlation 架構
Figure 3-3 MATLAB支援FUSE toolbox的執行程序流程圖
+7

參考文獻

相關文件

Map Reading & Map Interpretation Skills (e.g. read maps of different scales, interpret aerial photos & satellite images, measure distance & areas on maps)?. IT

Microphone and 600 ohm line conduits shall be mechanically and electrically connected to receptacle boxes and electrically grounded to the audio system ground point.. Lines in

For MIMO-OFDM systems, the objective of the existing power control strategies is maximization of the signal to interference and noise ratio (SINR) or minimization of the bit

傳統的 RF front-end 常定義在高頻無線通訊的接收端電路,例如類比 式 AM/FM 通訊、微波通訊等。射頻(Radio frequency,

This study focuses on the need of walking to school for middle-grades students and designs related teaching plans.This study firstly conducts a questionnaire

Using secondary development technology of NX Open API for C++, this study enables automatic designs that are centered on mold and CAD principles, while in the mean

Ethernet Module、RF Transceiver。Switching Power 為提供整個系統的電源,其輸入電 壓為 90V~264VAC,輸出 5VDC 為提供整個系統電源所需。RF Transceiver 所需的電 壓是 5VDC

This paper aims to study three questions (1) whether there is interaction between stock selection and timing, (2) to explore the performance of "timing and stock