• 沒有找到結果。

小型電動車充電站相關技術規範與驗證之研究

N/A
N/A
Protected

Academic year: 2021

Share "小型電動車充電站相關技術規範與驗證之研究"

Copied!
202
0
0

加載中.... (立即查看全文)

全文

Loading

數據

圖 2.2  電動車輛傳導式充電模式架構[6]  表2.2  交流型式1供電設備額定值  額定電壓(V)  額定電流(V)  說明  110(單相交流  )  12  使用額定電流 15A/額定電壓 125V 之 CNS  690(接地型 2 極)插頭。  110(單相直流)  16  使用額定電流 20A/額定電壓 125V 之 CNS  690(接地型 2 極)插頭。  220(單相交流)  12  使用額定電流 15A/額定電壓 250V 之 CNS  690(接地型 2 極)插頭。  220(單相直
表 3.3  標準檢驗局授權車測中心檢驗項目[12]  標準  檢驗項目  CNS 15511-3  外觀及結構檢驗 絶緣電阻試驗 耐電壓試驗  高濕度環境下之絶緣與耐電壓試驗 鎖緊裝置試驗 插拔力試驗 撞擊試驗  曲折試驗  車輛碾壓試驗  車輛端插座耐振試驗  防護等級試驗(IP55)  耐腐蝕性試驗  抗老化試驗  車測中心已建置完成國內首座全功能電動車充電站,可提供的充 電機界面包括有台灣 AC(交流)充電、美國 SAE AC 充電、歐洲 IEC type  I AC 充電、大陸 GB AC 充電及
表 4.6 IEC 61851-23 標準之技術內涵[24]  一般系統要求和 接口  電動汽車充電模式  電動汽車充電在本標準是採用充電模式 4。  充電模式 4 的充電裝置是用電動汽車的供電系統來連接電動汽車 充電站(例:非車載充電器)  保護接地連續性 檢查 對於獨立的系統,直流之間的保護導體的連續性電動汽車充電站 和車輛進行監測。為直流的額定電壓 60V 或更高,該直流電動車  充電站,應在損失後執行緊急關機在 10 s 內  直流充電站。 防止暫態過電壓 對於在職的最大輸出電壓高達 500V,電壓
表 4.22  接地端子短時耐大電流測試參數  充電介面額定 電流 A  接地導體(銅)的最小尺寸  mm²  時間 s  測試電流 A  16  4  4  470  32  6  4  750  63  10  4  1180  125  16  6  1530  250  25  6  2450  400  35  6  3100  6
+5

參考文獻

相關文件

Developing a signal logic to protect pedestrian who is crossing an intersection is the first purpose of this study.. In addition, to improve the reliability and reduce delay of

Therefore, the purpose of this study is to investigate the hospitality students’ entrepreneurial intentions based on theory of planned behavior and also determine the moderating

The purpose of this study is to analyze the status of the emerging fraudulent crime and to conduct a survey research through empirical questionnaires, based on

The usage of computer and Internet has provided a passageway to satisfy the needs.The purpose of this study is to probe into the Internet usage/online behavior and Internet

The purpose of this study is to investigate the researcher’s 19 years learning process and understanding of martial arts as a form of Serious Leisure and then to

The purpose of this research is to study the cross-strait visitor’s tourist experience.With the research background and motives stated as above, the objectives of this research

The main purpose of this study is to explore the status quo of the food quality and service quality for the quantity foodservice of the high-tech industry in Taiwan;

The main purpose of this study is to explore the work enthusiasm of the Primary School Teachers, the attitude of the enthusiasm and the effect of the enthusiasm.. In this