• 沒有找到結果。

應用於正交分頻多工系統之高效能波束形成技術

N/A
N/A
Protected

Academic year: 2021

Share "應用於正交分頻多工系統之高效能波束形成技術"

Copied!
96
0
0

加載中.... (立即查看全文)

全文

Loading

數據

圖 3.3 正交分頻多工系統傳送端調變器示意圖  由(3.4)式,以時域與頻域的觀點來看分頻正交多工信號, s k ( ) 為時域 的類比波形取樣點,而符元 / 2i N sd+ 則為頻域上每個子載波的信號。因此, 正交分頻多工系統可用傅立葉轉換之方式實現。為了使用快速傅立葉轉換 實現正交分頻多工系統,必須對信號取樣,而且取樣信號必須滿足取樣定 理,即取樣頻率必須大於等於兩倍信號頻寬。實際使用正交分頻多工系統 時,經常不會將全部的子載波用來載送信號,而這些不送信號的子載波稱 之為虛擬載波(Virtual C
圖 4.10 在平坦衰落通道中受同頻干擾倒置取樣矩陣演算法之模擬
圖 4.19 Cubic Spline Interpolation
圖 4.23 Construction of B-splines
+7

參考文獻

相關文件

For MIMO-OFDM systems, the objective of the existing power control strategies is maximization of the signal to interference and noise ratio (SINR) or minimization of the bit

金寶整體而言,2003 年至 2004 年時達完全效率,規模效率與 純粹技術效率皆維持於高效率狀態。合勤之純粹技術效率 2002 年 至 2003 年時達完全效率並持續至 2004 年,但因其規模效率

Envelopment Analysis,” International Institute for Applied Systems Analysis(IIASA), Interim Report, IR-97-079/October. Lye , “Clustering in a Data Envelopment Analysis

Singleton,”A methd for computing the fast Fourier Transform with auxiliary memory and limited high-speed storage”, IEEE Trans. Audio

Iwai , “A self-aligned emitter base NiSi electrode technology for advanced high-speed bipolar LSIs” , in IEEE Bipolar/BiCMOS Circuits and Technology Meeting , pp..

我們分別以兩種不同作法來進行模擬,再將模擬結果分別以圖 3.11 與圖 3.12 來 表示,其中,圖 3.11 之模擬結果是按照 IEEE 802.11a 中正交分頻多工符碼(OFDM symbol)的安排,以

Kalker, “Speed-Change Resistant Audio Fingerprinting Using Auto-Correlation,” in IEEE International Conference on Acoustics, Speech, and Signal Processing, vol. Kalker,

Chen, “Adjustable gamma correction circuit for TFT LCD,” IEEE International Symposium on Circuits and Systems, vol. Kan, “Implementation of the Gamma (γ) Line System Similar