Home Work Solutions 11
11-1 Using the loop rule, derive the differential equation for an LC circuit:
2 2
1 0
Ld q q
dt C
Sol: The loop rule, for just two devices in the loop, reduces to the statement that the magnitude of the voltage across one of them must equal the magnitude of the voltage across the other. Consider that the capacitor has charge q and a voltage (which we’ll consider positive in this discussion) V = q/C. Consider at this moment that the current in the inductor at this moment is directed in such a way that the capacitor charge is increasing (so i = +dq/dt). Equation 30-35 then produces a positive result equal to the V across the capacitor: V = L(di/dt), and we interpret the fact that di/dt > 0 in this discussion to mean that d(dq/dt)/dt = d2q/dt2 < 0 represents a “deceleration” of the charge-buildup process on the capacitor (since it is approaching its maximum value of charge). In this way we can “check” the signs in Eq. 31-11 (which states q/C = L d2q/dt2) to make sure we have implemented the loop rule correctly.
11-2 A series circuit containing inductance L1 and capacitance C1 oscillates at angular frequency ω. A second series circuit, containing inductance L2 and capacitance C2, oscillates at the same angular frequency. In terms of ω, what is the angular frequency of oscillation of a series circuit containing all four of these elements? Neglect
resistance. (Hint: Use the formulas for equivalent capacitance and equivalent inductance; see Section 25-4 and Problem 47 in Chapter 30.)
Sol: For the first circuit = (L1C1)–1/2, and for the second one = (L2C2)–1/2. When the two circuits are connected in series, the new frequency is
eq eq 1 2 1 2 1 2 1 1 2 2 2 1 1 2
1 1 1 2 1 2
1 1 1
/ /
1 1
, /
L C L L C C C C L C C L C C C C
L C C C C C
where we use 1 L C1 1 L C .2 2
11-3 An alternating source with a variable frequency, a capacitor with capacitance C, and a resistor with resistance R are connected in series. The following figure gives the impedance Z of the circuit versus the driving angular frequency ωd; the curve reaches an asymptote of 500 Ω, and the horizontal scale is set by ωds = 300 rad/s. The figure also gives the reactance XC for the capacitor versus ωd. What are (a) R and (b) C?
Sol: (a) The circuit has a resistor and a capacitor (but no inductor). Since the capacitive reactance decreases with frequency, then the asymptotic value of Z must be the resistance: R = 500 .
(b) We describe three methods here (each using information from different points on the graph):
method 1: At d = 50 rad/s, we have Z 700 , which gives C = (d Z2 - R2 )1
= 41 F.
method 2: At d = 50 rad/s, we have XC 500 , which gives C = (d XC)1 = 40 F.
method 3: At d = 250 rad/s, we have XC 100 , which gives C = (d XC)1
= 40 F.
11-4 An alternating source with a variable frequency, an inductor with inductance L, and a resistor with resistance R are connected in series. The following figure gives the impedance Z of the circuit versus the driving angular frequency ωd, with the
horizontal axis scale set by ωds = 1600 rad/s. The figure also gives the reactance XL for the inductor versus ωd. What are (a) R and (b) L?
Sol: (a) Since Z = R2 + XL
2 and XL = d L, then as d 0 we find Z R = 40 .
(b) L = XL /d = slope = 60 mH.
