建議

參考文獻

Boncio, P., Galli, P., Naso, G. & Pizzi, A. 2012. Zoning Surface Rupture Hazard along Normal Faults: Insight from the 2009 Mw 6.3 L'Aquila, Central Italy, Earthquake and Other Global Earthquakes. Bulletin of the Seismological Society of America,

102, 918-935, http://doi.org/10.1785/0120100301.

Chan, P.C., Li, c.h. & Lin, M.L. 2016. Evolution of Overburden Soil Deformation by Oblique-slip Faulting from Analogue Models. 7th Taiwan-Japan Workshop on Geotechnical Hazards from Large Earthquakes and Heavy Rainfall, PingTung, Taiwan.

Chang, Y., Lee, C., Huang, W., Huang, W., Lin, M., Hung, W. & Lin, Y. 2013. Use of centrifuge experiments and discrete element analysis to model the reverse fault slip. International Journal of Civil Engineering, 11, 79-89.

Chiba, T., Kaneta, S.-i. & Suzuki, Y. 2008. Red relief image map: new visualization method for three dimensional data. The International Archives of the

Photogrammetry, Remote Sensing and Spatial Information Sciences, 37, 1071-1076.

Christie-Blick, N. & Biddle, K.T. 1985. Deformation and Basin Formation along Strike-Slip Faults. SEPM (Society for Sedimentary Geology) Special publication, 37, 1-34.

Chu, S.-S., Lin, M.-L., Huang, W.-C., Liu, H.-C. & Chan, P.-C. 2013. Laboratory Simulation of Shear Band Development in a Growth Normal Fault. Journal of GeoEngineering, 8, 19-26.

Clifton, A. & Einarsson, P. 2005. Styles of surface rupture accompanying the June 17 and 21, 2000 earthquakes in the South Iceland Seismic Zone. Tectonophysics, 396, 141-159, http://doi.org/10.1016/j.tecto.2004.11.007.

Dooley, T. & Schreurs, G. 2012. Analogue modelling of intraplate strike-slip tectonics:

A review and new experimental results. Tectonophysics, 574, 1-71, http://doi.org/DOI 10.1016/j.tecto.2012.05.030.

Emmons, R. 1969. Strike-slip rupture patterns in sand models. Tectonophysics, 7, 71-87.

Gold, R.D., Reitman, N.G., Briggs, R.W., Barnhart, W.D., Hayes, G.P. & Wilson, E.

2015. On-and off-fault deformation associated with the September 2013 M w 7.7 Balochistan earthquake: implications for geologic slip rate measurements.

Tectonophysics, 660, 65-78.

Hornblow, S., Quigley, M., Nicol, A., Van Dissen, R. & Wang, N. 2014.

Paleoseismology of the 2010 Mw 7.1 Darfield (Canterbury) earthquake source, Greendale Fault, New Zealand. Tectonophysics, 637, 178-190,

http://doi.org/10.1016/j.tecto.2014.10.004.

Huang, W.-J. & Johnson, A.M. 2010. Quantitative description and analysis of

earthquake-induced deformation zones along strike-slip and dip-slip faults. Journal of Geophysical Research, 115, http://doi.org/10.1029/2009jb006361.

Kaneda, H., Nakata, T., Tsutsumi, H., Kondo, H., Sugito, N., Awata, Y., Akhtar, S.S., Majid, A., et al. 2008. Surface Rupture of the 2005 Kashmir, Pakistan, Earthquake and Its Active Tectonic Implications. Bulletin of the Seismological Society of America, 98, 521-557, http://doi.org/10.1785/0120070073.

Kelson, K.I., Kang, K.-H., Page, W.D., Lee, C.-T. & Cluff, L.S. 2001. Representative styles of deformation along the Chelungpu fault from the 1999 Chi-Chi (Taiwan) earthquake: geomorphic characteristics and responses of man-made structures.

Bulletin of the Seismological Society of America, 91, 930-952.

Khajavi, N., Quigley, M. & Langridge, R.M. 2014. Influence of topography and basement depth on surface rupture morphology revealed from LiDAR and field mapping, Hope Fault, New Zealand. Tectonophysics, 630, 265-284,

http://doi.org/10.1016/j.tecto.2014.05.032.

Lazarte, C. & Bray, J. 1996. A study of strike-slip faulting using small-scale models.

ASTM geotechnical testing journal, 19, 118-129.

Le Guerroué, E. & Cobbold, P.R. 2006. Influence of erosion and sedimentation on strike-slip fault systems: insights from analogue models. Journal of Structural Geology, 28, 421-430, http://doi.org/10.1016/j.jsg.2005.11.007.

Li, C.-Y., Wei, Z.-Y., Ye, J.-Q., Han, Y.-B. & Zheng, W.-J. 2010. Amounts and styles of coseismic deformation along the northern segment of surface rupture, of the 2008 Wenchuan Mw 7.9 earthquake, China. Tectonophysics, 491, 35-58,

http://doi.org/10.1016/j.tecto.2009.09.023.

Lin, A. & Nishikawa, M. 2011. Riedel shear structures in the co-seismic surface rupture zone produced by the 2001 Mw 7.8 Kunlun earthquake, northern Tibetan Plateau.

Journal of Structural Geology, 33, 1302-1311, http://doi.org/10.1016/j.jsg.2011.07.003.

Lin, A., Toda, S., Rao, G., Tsuchihashi, S. & Yan, B. 2013. Structural Analysis of Coseismic Normal Fault Zones of the 2011 Mw 6.6 Fukushima Earthquake,

Northeast Japan. Bulletin of the Seismological Society of America, 103, 1603-1613, http://doi.org/10.1785/0120120111.

Lin, M.-L., Chung, C.-F. & Jeng, F.-S. 2006. Deformation of overburden soil induced by thrust fault slip. Engineering Geology, 88, 70-89, http://doi.org/DOI

10.1016/j.enggeo.2006.08.004.

Lin, M.-L., Chung, C.-F., Jeng, F.-S. & Yao, T.-C. 2007. The deformation of overburden soil induced by thrust faulting and its impact on underground tunnels. Engineering Geology, 92, 110-132.

Naylor, M., Mandl, G.t. & Supesteijn, C. 1986. Fault geometries in basement-induced wrench faulting under different initial stress states. Journal of Structural Geology,

8, 737-752, http://doi.org/Doi 10.1016/0191-8141(86)90022-2.

Quigley, M., Van Dissen, R., Litchfield, N., Villamor, P., Duffy, B., Barrell, D., Furlong, K., Stahl, T., et al. 2011. Surface rupture during the 2010 Mw 7.1 Darfield

(Canterbury) earthquake: Implications for fault rupture dynamics and seismic-hazard analysis. Geology, 40, 55-58, http://doi.org/10.1130/g32528.1.

Shirahama, Y., Yoshimi, M., Awata, Y., Maruyama, T., Azuma, T., Miyashita, Y., Mori, H., Imanishi, K., et al. 2016. Characteristics of the surface ruptures associated with the 2016 Kumamoto earthquake sequence, central Kyushu, Japan. Earth, Planets and Space, 68, 191.

Soto, R., Martinod, J. & Odonne, F. 2007. Influence of early strike-slip deformation on subsequent perpendicular shortening: An experimental approach. Journal of Structural Geology, 29, 59-72, http://doi.org/10.1016/j.jsg.2006.08.001.

Sylvester, A.G. 1988. Strike-slip faults. Geological Society of America Bulletin, 100, 1666-1703.

Tani, K., Ueta, K., Abe, S., Nakata, H. & Hayashi, H. 1997. Deformation structure of surface unconsolidated layer along the Nojima Earthquake Fault. Doboku Gakkai Ronbunshu, 1997, 21-39.

Thielicke, W. & Stamhuis, E. 2014. PIVlab–towards user-friendly, affordable and accurate digital particle image velocimetry in MATLAB. Journal of Open Research Software, 2.

Toscani, G., Di Bucci, D., Ravaglia, A., Seno, S., Fracassi, U. & Valensise, G. 2009.

Propagation of an inherited strike-slip fault through a foreland-chain system:

quantitative aspects from analogue modeling and applications. Bollettino della Società geologica italiana, 128, 107-122.

Treiman, J.A., Kendrick, K.J., Bryant, W.A., Rockwell, T.K. & McGill, S.F. 2002.

Primary surface rupture associated with the mw 7.1 16 october 1999 hector mine earthquake, san bernardino county, california. Bulletin of the Seismological Society of America, 92, 1171-1191.

Ueta, K., Tani, K. & Kato, T. 2000. Computerized X-ray tomography analysis of three-dimensional fault geometries in basement-induced wrench faulting. Engineering Geology, 56, 197-210.

Wang, H., Ran, Y., Chen, L., Shi, X., Liu, R. & Gomez, F. 2010. Determination of horizontal shortening and amount of reverse-faulting from trenching across the surface rupture of the 2008 MW 7.9 Wenchuan earthquake, China. Tectonophysics,

491, 10-20, http://doi.org/10.1016/j.tecto.2010.03.019.

Xu, X., Yu, G., Klinger, Y., Tapponnier, P. & Van Der Woerd, J. 2006. Reevaluation of

surface rupture parameters and faulting segmentation of the 2001 Kunlunshan earthquake (Mw7.8), northern Tibetan Plateau, China. Journal of Geophysical Research, 111, http://doi.org/10.1029/2004jb003488.

Zwaan, F., Schreurs, G., Naliboff, J. & Buiter, S.J.H. 2016. Insights into the effects of oblique extension on continental rift interaction from 3D analogue and numerical models. Tectonophysics, 693, 239-260, http://doi.org/10.1016/j.tecto.2016.02.036.

上田圭一 & 谷和夫. 1999. 基盤の断層変位に伴う第四紀層及び地表の変形状況 の検討 (その 3)-横ずれ, 斜めずれ断層模型実験. 電力中央研究所報告 U,

98049, 1999.

地震調査研究推進本部. 2013. 布田川断層帯・日奈久断層帯の評価（一部改

附錄 A 砂箱試驗地表成果圖

A-1 走向滑移(m1)正射影像圖

A-2 走向滑移(m1)數值地形高程圖

A-3 走向滑移(m1)日照陰影圖

A-4 走向滑移(m1)等高線圖

A-5 走向滑移(m1)坡度圖

A-6 走向滑移(m1)坡向圖

A-7 走向滑移(m1)粗糙度圖

A-8 走向滑移(m1)地表線形

A-9 走向滑移(m2)正射影像圖

A-10 走向滑移(m2)數值地形高程圖

A-11 走向滑移(m2)日照陰影圖

A-12 走向滑移(m2)等高線圖

A-13 走向滑移(m2)坡度圖

A-14 走向滑移(m2)坡向圖

A-15 走向滑移(m2)粗糙度圖

A-16 走向滑移(m2)地表線形

A-17 斜向滑移(m3)正射影像圖

A-18 斜向滑移(m3)數值地形高程圖

A-19 斜向滑移(m3)日照陰影圖

A-20 斜向滑移(m3)等高線圖

A-21 斜向滑移(m3)坡度圖

A-22 斜向滑移(m3)坡向圖

A-23 斜向滑移(m3)粗糙度圖

A-24 斜向滑移(m3)地表線形

A-25 傾向滑移(m4)正射影像圖

A-26 傾向滑移(m4)數值地形高程圖

A-27 傾向滑移(m4)日照陰影圖

A-28 傾向滑移(m4)等高線圖

A-29 傾向滑移(m4)坡度圖

A-30 傾向滑移(m4)坡向圖

A-31 傾向滑移(m4)粗糙度圖

A-32 傾向滑移(m4)地表線形

A-33 斜向滑移(m5)正射影像圖

A-34 斜向滑移(m5)數值地形高程圖

A-35 斜向滑移(m5)日照陰影圖

A-36 斜向滑移(m5)等高線圖

A-37 斜向滑移(m5)坡度圖

A-38 斜向滑移(m5)坡向圖

A-39 斜向滑移(m5)粗糙度圖

A-40 斜向滑移(m5)地表線形

A-41 走向滑移(m6)正射影像圖

A-42 走向滑移(m6)數值地形高程圖

A-43 走向滑移(m6)日照陰影圖

A-44 走向滑移(m6)等高線圖

A-45 走向滑移(m6)坡度圖

A-46 走向滑移(m6)坡向圖

A-47 走向滑移(m6)粗糙度圖

A-48 走向滑移(m6)地表線形

A-49 斜向滑移(m7)正射影像圖

A-50 斜向滑移(m7)數值地形高程圖

A-51 斜向滑移(m7)日照陰影圖

A-52 斜向滑移(m7)等高線圖

A-53 斜向滑移(m7)坡度圖

A-54 斜向滑移(m7)坡向圖

A-55 斜向滑移(m7)粗糙度圖

A-56 斜向滑移(m7)地表線形

A-57 走向滑移(m8)正射影像圖

A-58 走向滑移(m8)數值地形高程圖

A-59 走向滑移(m8)日照陰影圖

A-60 走向滑移(m8)等高線圖

A-61 走向滑移(m8)坡度圖

A-62 走向滑移(m8)坡向圖

A-63 走向滑移(m8)粗糙度圖

A-64 走向滑移(m8)地表線形

A-65 PIV 設定參數