建議 - 轉換分析模型資訊 - IFC建築資訊內容應用於結構分析資料擷取

第五章轉換分析模型資訊

6.2 建議

1. 支援軟體廠商在 IFC 支援的資訊內容皆有完整度問題存在，且 IAI 所制定之 IFC 資訊內容在結構分析領域，未有與一般 CAD 軟體匯出之 IFC 資訊有轉換性，在 IAI 及支援廠商成熟度及完整度並不完善，IFC 資訊尚有一段加強空間。

2. 目前研究當中未有自行製作 IFC 資訊內容能力且 IFC 資訊內容非常龐大，研究過程中尚有許多 IFC 資訊內容並未使用及研究，目前僅研究 IFC 資訊在資料屬性抽取方式，僅須再將抽取資訊屬性內容加以演算進而達到 IFC 資訊分享的目的。

3. 程式撰寫開始並未考慮到成果呈現方式，在成果方面可以採用視窗化的方式進而加強成果的美觀易讀性、呈現方式更加靈活等優點，可更突顯撰寫程式部分的完整性。

4. IFC 資訊描述結構構件方面不僅只限於斷面擠出方式，尚有其他描述方式例如：由許多面組成構件，但這些未有 CAD 軟體廠商的支援，目前僅可以在一些 Ifc View 軟體上顯示物件形狀，在研究中亦未處理這類特殊描述方式，在支援程度方面受到限制，可供後進探討之。

參考文獻

[1] IAI，The EXPRESS Definition Language for IFC Development，USA，

http://www.iai-international.org/。

[2] IAI，FC2x3_Final_HTML_distribution，USA，2006，

http://www.iai-international.org/。

[3] IAI，IFC_2x_Technical_Guide，USA，2000，

http://www.iai-international.org/。

[4] Kassimali Aslam，Matrix Analysis of Structures，USA。

[5] IAI，buildingSMART_Glossary_V05，USA，2007，

http://www.iai-international.org/。

[6] National Institute of Building Sciences，National BIM Standard，USA，

2006。

[7] General Services Administration，BIM Guide Overview，USA，2006。

[8] AEC3，IFC and Geographic Information(IFG)，Germay，2004。

[9] 潘稟嘉，「建築圖形資訊標準於營建業電子商務之應用研究」，碩士論文，國

[14] 良葛格，Java JDK5.0 學習筆記，碁峯資訊，2005。

[15] 廖文棋，Java 2 精華，儒林資訊，1999。

[16] 古頤榛，Java 2 教學範本，碁峯資訊，2001。

[17] IAI，http://www.iai-international.org/。

[18] IfcWiki，http://www.ifcwiki.org/。

[19] buildingSmart，http://www.iai-tech.org/。

[20] 台灣 AutoDesk 網站，http://www.autodesk.com.tw/。

[21] Graphisoft 總公司網站，http://www.graphisoft.com/。

[22] 台灣 Bentley 網站，http://www.bentley.com.tw/。

表 3-1 IfcProject 屬性資料內容

屬性名稱屬性性質屬性資料

GlobalId

IfcGloballyUniqueId

OwnerHistory

IfcOwnerHistory

Name OPTIONAL

IfcLabel

Description OPTIONAL

IfcText

ObjectType OPTIONAL

IfcLabel

LongName OPTIONAL

IfcLabel

Phase OPTIONAL

IfcLabel

RepresentationContexts SET [1:?]

IfcRepresentationContext

UnitsInContext

IfcUnitAssignment

表 3-2 IfcSite 屬性內容

屬性名稱屬性性質屬性資料

GlobalId

IfcGloballyUniqueId

OwnerHistory

IfcOwnerHistory

Name OPTIONAL

IfcLabel

Description OPTIONAL

IfcText

ObjectType OPTIONAL

IfcLabel

ObjectPlacement OPTIONAL

IfcObjectPlacement

Representation OPTIONAL

IfcProductRepresentation

LongName OPTIONAL

IfcLabel

CompositionType

IfcElementCompositionEnum

RefLatitude OPTIONAL

IfcCompoundPlaneAngleMeasure

RefLongitude OPTIONAL

IfcCompoundPlaneAngleMeasure

RefElevation OPTIONAL

IfcLengthMeasure

LandTitleNumber OPTIONAL

IfcLabel

SiteAddress OPTIONAL

IfcPostalAddress

表 3-3 IfcBuilding 屬性內容

屬性名稱屬性性質屬性資料

GlobalId

IfcGloballyUniqueId

OwnerHistory

IfcOwnerHistory

Name OPTIONAL

IfcLabel

Description OPTIONAL

IfcText

ObjectType OPTIONAL

IfcLabel

ObjectPlacement OPTIONAL

IfcObjectPlacement

Representation OPTIONAL

IfcProductRepresentation

LongName OPTIONAL

IfcLabel

CompositionType

IfcElementCompositionEnum

ElevationOfRefHeight OPTIONAL

IfcLengthMeasure

ElevationOfTerrain OPTIONAL

IfcLengthMeasure

BuildingAddress OPTIONAL

IfcPostalAddress

表 3-4 IfcBuildingStorey 屬性內容

屬性名稱屬性性質屬性資料

GlobalId

IfcGloballyUniqueId

OwnerHistory

IfcOwnerHistory

Name OPTIONAL

IfcLabel

Description OPTIONAL

IfcText

ObjectType OPTIONAL

IfcLabel

ObjectPlacement OPTIONAL

IfcObjectPlacement

Representation OPTIONAL

IfcProductRepresentation

LongName OPTIONAL

IfcLabel

CompositionType

IfcElementCompositionEnum

Elevation OPTIONAL

IfcLengthMeasure

表 3-5 IfcBeam 和 IfcColumn 屬性內容

屬性名稱屬性性質屬性資料

GlobalId

IfcGloballyUniqueId

OwnerHistory

IfcOwnerHistory

Name OPTIONAL

IfcLabel

Description OPTIONAL

IfcText

ObjectType OPTIONAL

IfcLabel

ObjectPlacement OPTIONAL

IfcObjectPlacement

Representation OPTIONAL

IfcProductRepresentation

Tag OPTIONAL

IfcIdentifier

表 4-1 IfcRectangleProfileDef 屬性內容

屬性名稱屬性性質屬性資料

ProfileType

IfcProfileTypeEnum

ProfileName OPTIONAL

IfcLabel

Position

IfcAxis2Placement2D

XDim

IfcPositiveLengthMeasure

表 4-2 IfcCircleProfileDef 屬性內容

屬性名稱屬性性質屬性資料

ProfileType

IfcProfileTypeEnum

ProfileName OPTIONAL

IfcLabel

Position

IfcAxis2Placement2D

Radius

IfcPositiveLengthMeasure

表 4-3 IfcArbitraryClosedProfileDef 屬性內容

屬性名稱屬性性質屬性資料

ProfileType

IfcProfileTypeEnum

ProfileName OPTIONAL

IfcLabel

OuterCurve

IfcCurve

表 4-4 IfcPolyline 屬性資訊內容

屬性名稱屬性性質屬性資料

Points LIST [2:?]

IfcCartesianPoint

表 4-5 樓層資訊(單位：mm)

No Name 高程樓層高

2 6200 3100

1 3100 3100

0 Ground Floor 0 3100

表 4-6 一樓梁、柱座標點位置(單位：mm)

ID Type x1 y1 z1 x2 y2 z2 CRE-003 柱 -1046 14565 0 -1046 14565 3100 CRE-004 柱 4954 14565 0 4954 14565 3100 CRE-005 柱 10954 14565 0 10954 14565 3100 CRE-010 柱 -1046 10565 0 -1046 10565 3100 CRE-011 柱 4954 10565 0 4954 10565 3100 CRE-012 柱 10954 10565 0 10954 10565 3100 BMR-003 梁 -1046 14565 3100 4954 14565 3100 BMR-004 梁 4954 14565 3100 10954 14565 3100 BMR-012 梁 -1046 14565 3100 -1046 10565 3100 BMR-013 梁 4954 14565 3100 4954 10565 3100 BMR-014 梁 10954 14565 3100 10954 10565 3100 BMR-015 梁 -1046 14565 3100 4954 10565 3100 BMR-016 梁 4954 14565 3100 10954 10565 3100

表 4-7 二樓梁、柱座標點位置(單位：mm)

ID Type x1 y1 z1 x2 y2 z2 CRE-003 柱 -1046 14565 3100 -1046 14565 6200 CRE-004 柱 4954 14565 3100 4954 14565 6200 CRE-007 柱 10954 14565 3100 10954 14565 6200 CRE-005 柱 -1046 10565 3100 -1046 10565 6200 CRE-006 柱 4954 10565 3100 4954 10565 6200 CRE-008 柱 10954 10565 3100 10954 10565 6200 BMR-017 梁 -1046 14565 6200 4954 14565 6200 BMR-018 梁 4954 14565 6200 10954 14565 6200 BMR-019 梁 -1046 14565 6200 -1046 10565 6200 BMR-020 梁 4954 14565 6200 4954 10565 6200 BMR-021 梁 10954 14565 6200 10954 10565 6200 BMR-022 梁 -1046 14565 6200 4954 10565 6200 BMR-023 梁 4954 14565 6200 10954 10565 6200

表 4-8 結構構件斷面資料

結構構件(cm) 面積 A(cm²) 慣性矩 Ix(cm⁴) 慣性矩 Iy(cm⁴) 梁(400) 400 13333.33 13333.33 梁(600) 400 13333.33 13333.33 柱(310) 900 67500 67500

圖 2-1 STEP 架構圖

圖 2-2 IFC 基本架構圖(IAI 2006)

圖 3-1 一般文字編輯軟體開啟 IFC 資訊內容

圖 3-2 IfcQuickBrowser 開啟 IFC 資訊內容

圖 3-3 IFC Engine Viewer 開啟 IFC 資訊內容

圖 3-4 IFC 資訊架構圖

圖 3-5 IfcBeam 標準幾何表示

圖 3-6 IfcBeam 進階幾何表示

圖 3-7 使用 IfcHalfSpaceSolid 幾何表示

圖 3-8 IfcFacetedBrep 物體形狀 Schema 表示

圖 3-9 IfcFacetedBrep 物體形狀表示

圖 3-10 IfcArbitraryClosedProfileDef 表示 I 型斷面

圖 3-11 IfcIShapeProfileDef 表示 I 型斷面

圖 4-1 ArchiCAD10 柱設定

圖 4-2 Column Default Settings

圖 4-3 ArchiCAD10 梁設定

圖 4-4 Beam Default Settings

圖 4-5 ArchiCAD10 樓層設定

圖 4-6 Story Settings

圖 4-7 柱位置設定

圖 4-8 梁位置設定

圖 4-9 梁、柱配置平面圖

圖 4-10 建築物 3D 立體圖

圖 4-11 ArchiCAD10 另存新檔設定

圖 4-12 IFC 單位設定

圖 4-13 IFC 建築資訊檔案開啟的 Schema 資訊

圖 4-14 IFC 建築資訊檔案開啟的圖形資訊

圖 5-1 IFC 資訊開始的內容

圖 5-2 IFC 資訊結束的內容

圖 5-3 IFC 資訊的內容

圖 5-4 IFC2x3 所有物件的筆數

圖 5-5 IFC 所定義的矩形形狀表示

圖 5-6 IFC 所定義的圓形形狀表示

圖 5-7 IFC 所定義的 T 形形狀表示

圖 5-8 IFC 所定義的 I 形形狀表示

圖 5-9 IFC 所定義的中空矩形形狀表示

圖 5-10 ArchiCAD10 建立的模型實例

圖 5-11 IFC 模型實例

圖 5-12 BMR-012 梁物件內容

圖 5-13 CRE-003 材料連結物件內容

圖 5-14 BMR-012 材料連結物件內容

附件一

ISO-10303-21;

HEADER;

FILE_DESCRIPTION(('ArchiCAD 10.00 Release 1 generated IFC file.','Build Number of the Ifc 2x2 interface:

55361 (31-03-2006)\X\0A'),'2;1');

FILE_NAME('C:\\Documents and

Settings\\Administrator\\\S\.\S\`\S\-\S\1\\6b6c.ifc','2007-07-14T22:35:40',('Architect'),('Building Designer Office'),'PreProc - EDM 4.5.0033','Windows System','The authorising person');

FILE_SCHEMA(('IFC2X2_FINAL'));

ENDSEC;

DATA;

#1= IFCORGANIZATION('GS','Graphisoft','Graphisoft',$,$);

#5= IFCAPPLICATION(#1,'10.0','ArchiCAD 10.0','ArchiCAD');

#6= IFCPERSON($,'Undefined',$,$,$,$,$,$);

#8= IFCORGANIZATION($,'OrganizationName',$,$,$);

#12= IFCPERSONANDORGANIZATION(#6,#8,$);

#13= IFCOWNERHISTORY(#12,#5,$,.NOCHANGE.,$,$,$,1184423739);

#14= IFCSIUNIT(*,.LENGTHUNIT.,.MILLI.,.METRE.);

#15= IFCSIUNIT(*,.AREAUNIT.,$,.SQUARE_METRE.);

#16= IFCSIUNIT(*,.VOLUMEUNIT.,$,.CUBIC_METRE.);

#17= IFCSIUNIT(*,.PLANEANGLEUNIT.,$,.RADIAN.);

#18= IFCMEASUREWITHUNIT(IFCPLANEANGLEMEASURE(0.017453293),#17);

#19= IFCDIMENSIONALEXPONENTS(0,0,0,0,0,0,0);

#20= IFCCONVERSIONBASEDUNIT(#19,.PLANEANGLEUNIT.,'DEGREE',#18);

#21= IFCSIUNIT(*,.SOLIDANGLEUNIT.,$,.STERADIAN.);

#22= IFCSIUNIT(*,.MASSUNIT.,$,.GRAM.);

#23= IFCSIUNIT(*,.TIMEUNIT.,$,.SECOND.);

#24= IFCSIUNIT(*,.THERMODYNAMICTEMPERATUREUNIT.,$,.DEGREE_CELSIUS.);

#25= IFCSIUNIT(*,.LUMINOUSINTENSITYUNIT.,$,.LUMEN.);

#26= IFCUNITASSIGNMENT((#14,#15,#16,#20,#21,#22,#23,#24,#25));

#28= IFCDIRECTION((1.,0.,0.));

#30= IFCDIRECTION((0.,1.,0.));

#32= IFCDIRECTION((0.,0.,1.));

#35= IFCCARTESIANPOINT((0.,0.,0.));

#38= IFCDIRECTION((6.1230318E-17,1.));

#40= IFCGEOMETRICREPRESENTATIONCONTEXT('Plan','Design',3,1.0000000E-5,#37,#38);

#42= IFCPROJECT('2AppkTgXrDqu1tOSqGiI$3',#13,'Default Project',$,$,$,$,(#40,#106),#26);

#49= IFCLOCALPLACEMENT($,#37);

#51= IFCBUILDING('1vwimUhLf2tQ3OdIlhLEGZ',#13,'Default Building',$,$,#49,$,$,.ELEMENT.,$,$,$);

#60= IFCAXIS2PLACEMENT3D(#35,#32,#28);

#61= IFCLOCALPLACEMENT(#49,#60);

#63= IFCBUILDINGSTOREY('1BCtUo0HrChvPqZz$gLQi3',#13,'Ground Floor',$,$,#61,$,$,.ELEMENT.,0.);

#72= IFCCOLUMN('20342sNI1AZPT7O8NWL$6p',#13,'CRE - 003',$,$,#119,#113,$);

#89= IFCDIRECTION((1.,0.));

#91= IFCCARTESIANPOINT((0.,0.));

#93= IFCAXIS2PLACEMENT2D(#91,#89);

#94= IFCRECTANGLEPROFILEDEF(.AREA.,$,#93,300.,300.);

#95= IFCAXIS2PLACEMENT3D(#35,#32,#28);

#96= IFCEXTRUDEDAREASOLID(#94,#95,#32,3100.);

#97= IFCSHAPEREPRESENTATION(#40,'Body','SweptSolid',(#96));

#101= IFCCARTESIANPOINT((-150.,-150.,0.));

#103= IFCBOUNDINGBOX(#101,300.,300.,3100.);

#104= IFCDIRECTION((6.1230318E-17,1.));

#106= IFCGEOMETRICREPRESENTATIONCONTEXT('Plan','Sketch',3,1.0000000E-5,#37,#104);

#109= IFCSHAPEREPRESENTATION(#106,'IAI','BoundingBox',(#103));

#113= IFCPRODUCTDEFINITIONSHAPE($,$,(#97,#109));

#116= IFCCARTESIANPOINT((-1046.2269,14564.58,0.));

#118= IFCAXIS2PLACEMENT3D(#116,#32,#28);

#119= IFCLOCALPLACEMENT(#61,#118);

#121= IFCMATERIAL('Structural Concrete');

#123= IFCRELASSOCIATESMATERIAL('05zy97nXT0A9rdunygvJEJ',#13,$,$,(#72),#121);

#125= IFCPROPERTYSINGLEVALUE('Layername',$,IFCLABEL('Structural - Bearing'),$);

#129= IFCPROPERTYSINGLEVALUE('Red',$,IFCINTEGER(168),$);

#133= IFCPROPERTYSINGLEVALUE('Green',$,IFCINTEGER(15),$);

#137= IFCPROPERTYSINGLEVALUE('Blue',$,IFCINTEGER(2),$);

#141= IFCCOMPLEXPROPERTY('Color',$,'Color',(#129,#133,#137));

#146= IFCPROPERTYSET('1vlH9qitb789$UJkTCm9$u',#13,'PSet_Draughting',$,(#125,#141));

#151= IFCRELDEFINESBYPROPERTIES('3EaMoGFTj69eRqqutIqTBR',#13,$,$,(#72),#146);

#153= IFCCOLUMN('1H82O7bbr4khkywRi_xnbA',#13,'CRE - 004',$,$,#196,#190,$);

#171= IFCDIRECTION((1.,0.));

#173= IFCCARTESIANPOINT((0.,0.));

#175= IFCAXIS2PLACEMENT2D(#173,#171);

#177= IFCAXIS2PLACEMENT3D(#35,#32,#28);

#178= IFCEXTRUDEDAREASOLID(#176,#177,#32,3100.);

#179= IFCSHAPEREPRESENTATION(#40,'Body','SweptSolid',(#178));

#183= IFCCARTESIANPOINT((-150.,-150.,0.));

#185= IFCBOUNDINGBOX(#183,300.,300.,3100.);

#186= IFCSHAPEREPRESENTATION(#106,'IAI','BoundingBox',(#185));

#190= IFCPRODUCTDEFINITIONSHAPE($,$,(#179,#186));

#193= IFCCARTESIANPOINT((4953.7731,14564.58,0.));

#195= IFCAXIS2PLACEMENT3D(#193,#32,#28);

#196= IFCLOCALPLACEMENT(#61,#195);

#198= IFCRELASSOCIATESMATERIAL('3wstoUv1b0v9wQGJaA1wmS',#13,$,$,(#153),#121);

#200= IFCPROPERTYSINGLEVALUE('Layername',$,IFCLABEL('Structural - Bearing'),$);

#204= IFCPROPERTYSINGLEVALUE('Red',$,IFCINTEGER(168),$);

#208= IFCPROPERTYSINGLEVALUE('Green',$,IFCINTEGER(15),$);

#212= IFCPROPERTYSINGLEVALUE('Blue',$,IFCINTEGER(2),$);

#216= IFCCOMPLEXPROPERTY('Color',$,'Color',(#204,#208,#212));

#221= IFCPROPERTYSET('3wgr7zJvvEC8syfYNnHpdU',#13,'PSet_Draughting',$,(#200,#216));

#226= IFCRELDEFINESBYPROPERTIES('1eY0iQvGT4zQc5yleDl4Zy',#13,$,$,(#153),#221);

#228= IFCCOLUMN('08GledAjrA_xxek0z0oyUR',#13,'CRE - 010',$,$,#270,#264,$);

#245= IFCDIRECTION((1.,0.));

#247= IFCCARTESIANPOINT((0.,0.));

#249= IFCAXIS2PLACEMENT2D(#247,#245);

#250= IFCRECTANGLEPROFILEDEF(.AREA.,$,#249,300.,300.);

#251= IFCAXIS2PLACEMENT3D(#35,#32,#28);

#252= IFCEXTRUDEDAREASOLID(#250,#251,#32,3100.);

#253= IFCSHAPEREPRESENTATION(#40,'Body','SweptSolid',(#252));

#257= IFCCARTESIANPOINT((-150.,-150.,0.));

#259= IFCBOUNDINGBOX(#257,300.,300.,3100.);

#260= IFCSHAPEREPRESENTATION(#106,'IAI','BoundingBox',(#259));

#264= IFCPRODUCTDEFINITIONSHAPE($,$,(#253,#260));

#267= IFCCARTESIANPOINT((-1046.2269,10564.58,0.));

#269= IFCAXIS2PLACEMENT3D(#267,#32,#28);

#270= IFCLOCALPLACEMENT(#61,#269);

#272= IFCRELASSOCIATESMATERIAL('1WJrB2oAT1Cfyx2qLq45R5',#13,$,$,(#228),#121);

#274= IFCPROPERTYSINGLEVALUE('Layername',$,IFCLABEL('Structural - Bearing'),$);

#278= IFCPROPERTYSINGLEVALUE('Red',$,IFCINTEGER(168),$);

#282= IFCPROPERTYSINGLEVALUE('Green',$,IFCINTEGER(15),$);

#286= IFCPROPERTYSINGLEVALUE('Blue',$,IFCINTEGER(2),$);

#296= IFCPROPERTYSET('03Kjr54dn99AfaIKqtOIae',#13,'PSet_Draughting',$,(#274,#291));

#301= IFCRELDEFINESBYPROPERTIES('0XNE3W4QD6kQvYTffP3VI5',#13,$,$,(#228),#296);

#303= IFCCOLUMN('3RgeYQ6XPDbwqKb_MhpBvM',#13,'CRE - 011',$,$,#345,#339,$);

#320= IFCDIRECTION((1.,0.));

#322= IFCCARTESIANPOINT((0.,0.));

#324= IFCAXIS2PLACEMENT2D(#322,#320);

#325= IFCRECTANGLEPROFILEDEF(.AREA.,$,#324,300.,300.);

#326= IFCAXIS2PLACEMENT3D(#35,#32,#28);

#327= IFCEXTRUDEDAREASOLID(#325,#326,#32,3100.);

#328= IFCSHAPEREPRESENTATION(#40,'Body','SweptSolid',(#327));

#332= IFCCARTESIANPOINT((-150.,-150.,0.));

#334= IFCBOUNDINGBOX(#332,300.,300.,3100.);

#335= IFCSHAPEREPRESENTATION(#106,'IAI','BoundingBox',(#334));

#339= IFCPRODUCTDEFINITIONSHAPE($,$,(#328,#335));

#342= IFCCARTESIANPOINT((4953.7731,10564.569,0.));

#344= IFCAXIS2PLACEMENT3D(#342,#32,#28);

#345= IFCLOCALPLACEMENT(#61,#344);

#347= IFCRELASSOCIATESMATERIAL('3NXQcEev9FHOOcMfgIQOda',#13,$,$,(#303),#121);

#349= IFCPROPERTYSINGLEVALUE('Layername',$,IFCLABEL('Structural - Bearing'),$);

#353= IFCPROPERTYSINGLEVALUE('Red',$,IFCINTEGER(168),$);

#357= IFCPROPERTYSINGLEVALUE('Green',$,IFCINTEGER(15),$);

#361= IFCPROPERTYSINGLEVALUE('Blue',$,IFCINTEGER(2),$);

#365= IFCCOMPLEXPROPERTY('Color',$,'Color',(#353,#357,#361));

#370= IFCPROPERTYSET('1$Kbzq0cfAWBFtnqahcwDA',#13,'PSet_Draughting',$,(#349,#365));

#375= IFCRELDEFINESBYPROPERTIES('1spQizK2j5AxkPd6TYH5rA',#13,$,$,(#303),#370);

#377= IFCCOLUMN('20_UJV51H95eVbO56XFBuG',#13,'CRE - 005',$,$,#420,#413,$);

#394= IFCDIRECTION((1.,0.));

#396= IFCCARTESIANPOINT((0.,0.));

#398= IFCAXIS2PLACEMENT2D(#396,#394);

#399= IFCRECTANGLEPROFILEDEF(.AREA.,$,#398,300.,300.);

#400= IFCAXIS2PLACEMENT3D(#35,#32,#28);

#401= IFCEXTRUDEDAREASOLID(#399,#400,#32,3100.);

#402= IFCSHAPEREPRESENTATION(#40,'Body','SweptSolid',(#401));

#406= IFCCARTESIANPOINT((-150.,-150.,0.));

#408= IFCBOUNDINGBOX(#406,300.,300.,3100.);

#409= IFCSHAPEREPRESENTATION(#106,'IAI','BoundingBox',(#408));

#413= IFCPRODUCTDEFINITIONSHAPE($,$,(#402,#409));

#416= IFCCARTESIANPOINT((10953.773,14564.58,0.));

#420= IFCLOCALPLACEMENT(#61,#419);

#422= IFCRELASSOCIATESMATERIAL('1h5kruhwX9_QoWOOZy0QUz',#13,$,$,(#377),#121);

#424= IFCPROPERTYSINGLEVALUE('Layername',$,IFCLABEL('Structural - Bearing'),$);

#428= IFCPROPERTYSINGLEVALUE('Red',$,IFCINTEGER(168),$);

#432= IFCPROPERTYSINGLEVALUE('Green',$,IFCINTEGER(15),$);

#436= IFCPROPERTYSINGLEVALUE('Blue',$,IFCINTEGER(2),$);

#440= IFCCOMPLEXPROPERTY('Color',$,'Color',(#428,#432,#436));

#445= IFCPROPERTYSET('2LhT1jMbjD7Qo$QUXkHnMH',#13,'PSet_Draughting',$,(#424,#440));

#450= IFCRELDEFINESBYPROPERTIES('2Z92k7IpXC_QBBe3eODPOK',#13,$,$,(#377),#445);

#452= IFCCOLUMN('16Mlo0ab5Epvot1Jwl8_25',#13,'CRE - 012',$,$,#494,#488,$);

#469= IFCDIRECTION((1.,0.));

#471= IFCCARTESIANPOINT((0.,0.));

#473= IFCAXIS2PLACEMENT2D(#471,#469);

#474= IFCRECTANGLEPROFILEDEF(.AREA.,$,#473,300.,300.);

#475= IFCAXIS2PLACEMENT3D(#35,#32,#28);

#476= IFCEXTRUDEDAREASOLID(#474,#475,#32,3100.);

#477= IFCSHAPEREPRESENTATION(#40,'Body','SweptSolid',(#476));

#481= IFCCARTESIANPOINT((-150.,-150.,0.));

#483= IFCBOUNDINGBOX(#481,300.,300.,3100.);

#484= IFCSHAPEREPRESENTATION(#106,'IAI','BoundingBox',(#483));

#488= IFCPRODUCTDEFINITIONSHAPE($,$,(#477,#484));

#491= IFCCARTESIANPOINT((10953.773,10564.58,0.));

#493= IFCAXIS2PLACEMENT3D(#491,#32,#28);

#494= IFCLOCALPLACEMENT(#61,#493);

#496= IFCRELASSOCIATESMATERIAL('1LPNYDxsfByhFzN2wUC9rF',#13,$,$,(#452),#121);

#498= IFCPROPERTYSINGLEVALUE('Layername',$,IFCLABEL('Structural - Bearing'),$);

#502= IFCPROPERTYSINGLEVALUE('Red',$,IFCINTEGER(168),$);

#506= IFCPROPERTYSINGLEVALUE('Green',$,IFCINTEGER(15),$);

#510= IFCPROPERTYSINGLEVALUE('Blue',$,IFCINTEGER(2),$);

#514= IFCCOMPLEXPROPERTY('Color',$,'Color',(#502,#506,#510));

#519= IFCPROPERTYSET('2QifX5z8fCAQIZpwkaiiE4',#13,'PSet_Draughting',$,(#498,#514));

#524= IFCRELDEFINESBYPROPERTIES('2lCHUaPJz8yfz6h0DiVcut',#13,$,$,(#452),#519);

#526=

IFCRELCONTAINEDINSPATIALSTRUCTURE('2W0UuIPp97cvezeV9sWNyx',#13,'BuildingStoreyContainer' ,'BuildingStoreyContainer for Building Elements',(#72,#153,#228,#303,#377,#452),#63);

#528= IFCCARTESIANPOINT((0.,0.,3100.));

#530= IFCAXIS2PLACEMENT3D(#528,#32,#28);

#531= IFCLOCALPLACEMENT(#49,#530);

#542= IFCCOLUMN('119q5mdP53sfmJ0L0J1gym',#13,'CRE - 004',$,$,#585,#579,$);

#560= IFCDIRECTION((1.,0.));

#562= IFCCARTESIANPOINT((0.,0.));

#564= IFCAXIS2PLACEMENT2D(#562,#560);

#565= IFCRECTANGLEPROFILEDEF(.AREA.,$,#564,300.,300.);

#566= IFCAXIS2PLACEMENT3D(#35,#32,#28);

#567= IFCEXTRUDEDAREASOLID(#565,#566,#32,3100.);

#568= IFCSHAPEREPRESENTATION(#40,'Body','SweptSolid',(#567));

#572= IFCCARTESIANPOINT((-150.,-150.,0.));

#574= IFCBOUNDINGBOX(#572,300.,300.,3100.);

#575= IFCSHAPEREPRESENTATION(#106,'IAI','BoundingBox',(#574));

#579= IFCPRODUCTDEFINITIONSHAPE($,$,(#568,#575));

#582= IFCCARTESIANPOINT((4953.7731,14564.58,0.));

#584= IFCAXIS2PLACEMENT3D(#582,#32,#28);

#585= IFCLOCALPLACEMENT(#531,#584);

#587= IFCRELASSOCIATESMATERIAL('2PyTMGfAn55BSkd9Ik51nP',#13,$,$,(#542),#121);

#589= IFCPROPERTYSINGLEVALUE('Layername',$,IFCLABEL('Structural - Bearing'),$);

#593= IFCPROPERTYSINGLEVALUE('Red',$,IFCINTEGER(168),$);

#597= IFCPROPERTYSINGLEVALUE('Green',$,IFCINTEGER(15),$);

#601= IFCPROPERTYSINGLEVALUE('Blue',$,IFCINTEGER(2),$);

#605= IFCCOMPLEXPROPERTY('Color',$,'Color',(#593,#597,#601));

#610= IFCPROPERTYSET('0jfpTCtHr4$eOxTguG7YQe',#13,'PSet_Draughting',$,(#589,#605));

#615= IFCRELDEFINESBYPROPERTIES('0m_ErDxlz7JAK4s65NYpxR',#13,$,$,(#542),#610);

#617= IFCCOLUMN('3GFQNSxqz0QPGpTm1XPcZJ',#13,'CRE - 005',$,$,#659,#653,$);

#634= IFCDIRECTION((1.,0.));

#636= IFCCARTESIANPOINT((0.,0.));

#638= IFCAXIS2PLACEMENT2D(#636,#634);

#639= IFCRECTANGLEPROFILEDEF(.AREA.,$,#638,300.,300.);

#640= IFCAXIS2PLACEMENT3D(#35,#32,#28);

#641= IFCEXTRUDEDAREASOLID(#639,#640,#32,3100.);

#642= IFCSHAPEREPRESENTATION(#40,'Body','SweptSolid',(#641));

#646= IFCCARTESIANPOINT((-150.,-150.,0.));

#648= IFCBOUNDINGBOX(#646,300.,300.,3100.);

#649= IFCSHAPEREPRESENTATION(#106,'IAI','BoundingBox',(#648));

#653= IFCPRODUCTDEFINITIONSHAPE($,$,(#642,#649));

#656= IFCCARTESIANPOINT((-1046.2269,10564.58,0.));

#658= IFCAXIS2PLACEMENT3D(#656,#32,#28);

#659= IFCLOCALPLACEMENT(#531,#658);

#663= IFCPROPERTYSINGLEVALUE('Layername',$,IFCLABEL('Structural - Bearing'),$);

#667= IFCPROPERTYSINGLEVALUE('Red',$,IFCINTEGER(168),$);

#671= IFCPROPERTYSINGLEVALUE('Green',$,IFCINTEGER(15),$);

#676= IFCPROPERTYSINGLEVALUE('Blue',$,IFCINTEGER(2),$);

#680= IFCCOMPLEXPROPERTY('Color',$,'Color',(#667,#671,#676));

#685= IFCPROPERTYSET('0c238ac8T5sR66BmzmPgVf',#13,'PSet_Draughting',$,(#663,#680));

#690= IFCRELDEFINESBYPROPERTIES('3ApS_4NA950PXBN9S8bxFk',#13,$,$,(#617),#685);

#692= IFCCOLUMN('084mgJK9r27h5c37S2tFO0',#13,'CRE - 006',$,$,#734,#728,$);

#709= IFCDIRECTION((1.,0.));

#711= IFCCARTESIANPOINT((0.,0.));

#713= IFCAXIS2PLACEMENT2D(#711,#709);

#714= IFCRECTANGLEPROFILEDEF(.AREA.,$,#713,300.,300.);

#715= IFCAXIS2PLACEMENT3D(#35,#32,#28);

#716= IFCEXTRUDEDAREASOLID(#714,#715,#32,3100.);

#717= IFCSHAPEREPRESENTATION(#40,'Body','SweptSolid',(#716));

#721= IFCCARTESIANPOINT((-150.,-150.,0.));

#723= IFCBOUNDINGBOX(#721,300.,300.,3100.);

#724= IFCSHAPEREPRESENTATION(#106,'IAI','BoundingBox',(#723));

#728= IFCPRODUCTDEFINITIONSHAPE($,$,(#717,#724));

#731= IFCCARTESIANPOINT((4953.7731,10564.569,0.));

#733= IFCAXIS2PLACEMENT3D(#731,#32,#28);

#734= IFCLOCALPLACEMENT(#531,#733);

#736= IFCRELASSOCIATESMATERIAL('1bunKABcPFNx4wd3NYTGU9',#13,$,$,(#692),#121);

#738= IFCPROPERTYSINGLEVALUE('Layername',$,IFCLABEL('Structural - Bearing'),$);

#742= IFCPROPERTYSINGLEVALUE('Red',$,IFCINTEGER(168),$);

#746= IFCPROPERTYSINGLEVALUE('Green',$,IFCINTEGER(15),$);

#750= IFCPROPERTYSINGLEVALUE('Blue',$,IFCINTEGER(2),$);

#754= IFCCOMPLEXPROPERTY('Color',$,'Color',(#742,#746,#750));

#759= IFCPROPERTYSET('0NHJC$iUjDOPHUdvmFVsQL',#13,'PSet_Draughting',$,(#738,#754));

#764= IFCRELDEFINESBYPROPERTIES('3mKF0FkZ9APB14G2tSleP$',#13,$,$,(#692),#759);

#766= IFCCOLUMN('2GPbcByyPBIA0ZVoSpENx_',#13,'CRE - 007',$,$,#809,#803,$);

#783= IFCDIRECTION((1.,0.));

#785= IFCCARTESIANPOINT((0.,0.));

#787= IFCAXIS2PLACEMENT2D(#785,#783);

#788= IFCRECTANGLEPROFILEDEF(.AREA.,$,#787,300.,300.);

#789= IFCAXIS2PLACEMENT3D(#35,#32,#28);

#790= IFCEXTRUDEDAREASOLID(#788,#789,#32,3100.);

#791= IFCSHAPEREPRESENTATION(#40,'Body','SweptSolid',(#790));

#797= IFCBOUNDINGBOX(#795,300.,300.,3100.);

#798= IFCSHAPEREPRESENTATION(#106,'IAI','BoundingBox',(#797));

#803= IFCPRODUCTDEFINITIONSHAPE($,$,(#791,#798));

#806= IFCCARTESIANPOINT((10953.773,14564.58,0.));

#808= IFCAXIS2PLACEMENT3D(#806,#32,#28);

#809= IFCLOCALPLACEMENT(#531,#808);

#811= IFCRELASSOCIATESMATERIAL('237BqMbyXFpPfn64eksfii',#13,$,$,(#766),#121);

#813= IFCPROPERTYSINGLEVALUE('Layername',$,IFCLABEL('Structural - Bearing'),$);

#817= IFCPROPERTYSINGLEVALUE('Red',$,IFCINTEGER(168),$);

#821= IFCPROPERTYSINGLEVALUE('Green',$,IFCINTEGER(15),$);

#825= IFCPROPERTYSINGLEVALUE('Blue',$,IFCINTEGER(2),$);

#829= IFCCOMPLEXPROPERTY('Color',$,'Color',(#817,#821,#825));

#834= IFCPROPERTYSET('01rvlt5qTCChFLBy7JL9q1',#13,'PSet_Draughting',$,(#813,#829));

#839= IFCRELDEFINESBYPROPERTIES('2FBtkE82v0uu1GD5Jmtvfe',#13,$,$,(#766),#834);

#841= IFCCOLUMN('3CnPG6GyvBW93jfAOWnDKc',#13,'CRE - 008',$,$,#883,#877,$);

#858= IFCDIRECTION((1.,0.));

#860= IFCCARTESIANPOINT((0.,0.));

#862= IFCAXIS2PLACEMENT2D(#860,#858);

#863= IFCRECTANGLEPROFILEDEF(.AREA.,$,#862,300.,300.);

#864= IFCAXIS2PLACEMENT3D(#35,#32,#28);

#865= IFCEXTRUDEDAREASOLID(#863,#864,#32,3100.);

#866= IFCSHAPEREPRESENTATION(#40,'Body','SweptSolid',(#865));

#870= IFCCARTESIANPOINT((-150.,-150.,0.));

#872= IFCBOUNDINGBOX(#870,300.,300.,3100.);

#873= IFCSHAPEREPRESENTATION(#106,'IAI','BoundingBox',(#872));

#877= IFCPRODUCTDEFINITIONSHAPE($,$,(#866,#873));

#880= IFCCARTESIANPOINT((10953.773,10564.58,0.));

#882= IFCAXIS2PLACEMENT3D(#880,#32,#28);

#883= IFCLOCALPLACEMENT(#531,#882);

#885= IFCRELASSOCIATESMATERIAL('0Q8QgKI1f228Uarr$p6LPj',#13,$,$,(#841),#121);

#887= IFCPROPERTYSINGLEVALUE('Layername',$,IFCLABEL('Structural - Bearing'),$);

#891= IFCPROPERTYSINGLEVALUE('Red',$,IFCINTEGER(168),$);

#895= IFCPROPERTYSINGLEVALUE('Green',$,IFCINTEGER(15),$);

#899= IFCPROPERTYSINGLEVALUE('Blue',$,IFCINTEGER(2),$);

#903= IFCCOMPLEXPROPERTY('Color',$,'Color',(#891,#895,#899));

#908= IFCPROPERTYSET('083Ar8zn17Gwxo6vhGsBSo',#13,'PSet_Draughting',$,(#887,#903));

#913= IFCRELDEFINESBYPROPERTIES('1a_auT2mfBrvjztF$60Dr3',#13,$,$,(#841),#908);

#915= IFCCOLUMN('1Ht8gOVm53KAYWr9$2RLFV',#13,'CRE - 003',$,$,#958,#952,$);

#935= IFCCARTESIANPOINT((0.,0.));

#937= IFCAXIS2PLACEMENT2D(#935,#933);

#938= IFCRECTANGLEPROFILEDEF(.AREA.,$,#937,300.,300.);

#939= IFCAXIS2PLACEMENT3D(#35,#32,#28);

#940= IFCEXTRUDEDAREASOLID(#938,#939,#32,3100.);

#941= IFCSHAPEREPRESENTATION(#40,'Body','SweptSolid',(#940));

#945= IFCCARTESIANPOINT((-150.,-150.,0.));

#947= IFCBOUNDINGBOX(#945,300.,300.,3100.);

#948= IFCSHAPEREPRESENTATION(#106,'IAI','BoundingBox',(#947));

#952= IFCPRODUCTDEFINITIONSHAPE($,$,(#941,#948));

#955= IFCCARTESIANPOINT((-1046.2269,14564.58,0.));

#957= IFCAXIS2PLACEMENT3D(#955,#32,#28);

#958= IFCLOCALPLACEMENT(#531,#957);

#960= IFCRELASSOCIATESMATERIAL('0s8PAFVx9CLAePikJrNMDn',#13,$,$,(#915),#121);

#962= IFCPROPERTYSINGLEVALUE('Layername',$,IFCLABEL('Structural - Bearing'),$);

#966= IFCPROPERTYSINGLEVALUE('Red',$,IFCINTEGER(168),$);

#970= IFCPROPERTYSINGLEVALUE('Green',$,IFCINTEGER(15),$);

#974= IFCPROPERTYSINGLEVALUE('Blue',$,IFCINTEGER(2),$);

#978= IFCCOMPLEXPROPERTY('Color',$,'Color',(#966,#970,#974));

#983= IFCPROPERTYSET('05EeeNdR98exS$f942d$Bp',#13,'PSet_Draughting',$,(#962,#978));

#988= IFCRELDEFINESBYPROPERTIES('26ZEL4bv50PBoJrG7YJVZE',#13,$,$,(#915),#983);

#990= IFCBEAM('1PNxGBw_vFTgNm986wuCDL',#13,'BMR - 012',$,$,#1034,#1026,$);

#1007= IFCDIRECTION((1.,0.));

#1009= IFCCARTESIANPOINT((-100.,0.));

#1011= IFCAXIS2PLACEMENT2D(#1009,#1007);

#1012= IFCRECTANGLEPROFILEDEF(.AREA.,$,#1011,200.,200.);

#1013= IFCAXIS2PLACEMENT3D(#35,#30,#32);

#1014= IFCEXTRUDEDAREASOLID(#1012,#1013,#32,4000.);

#1015= IFCSHAPEREPRESENTATION(#40,'Body','SweptSolid',(#1014));

#1019= IFCCARTESIANPOINT((-100.,0.,-200.));

#1021= IFCBOUNDINGBOX(#1019,200.,4000.,200.);

#1022= IFCSHAPEREPRESENTATION(#106,'IAI','BoundingBox',(#1021));

#1026= IFCPRODUCTDEFINITIONSHAPE($,$,(#1015,#1022));

#1029= IFCDIRECTION((-1.,-5.5511151E-17,0.));

#1031= IFCCARTESIANPOINT((-1046.2269,14564.58,100.));

#1033= IFCAXIS2PLACEMENT3D(#1031,#32,#1029);

#1034= IFCLOCALPLACEMENT(#531,#1033);

#1036= IFCRELASSOCIATESMATERIAL('185PsWvHH1AAwoxGm8d7mh',#13,$,$,(#990),#121);

#1042= IFCPROPERTYSINGLEVALUE('Red',$,IFCINTEGER(0),$);

#1046= IFCPROPERTYSINGLEVALUE('Green',$,IFCINTEGER(191),$);

#1050= IFCPROPERTYSINGLEVALUE('Blue',$,IFCINTEGER(191),$);

#1054= IFCCOMPLEXPROPERTY('Color',$,'Color',(#1042,#1046,#1050));

#1060= IFCPROPERTYSET('0VYEOP3YjDuxw3oCo55ls3',#13,'PSet_Draughting',$,(#1038,#1054));

#1065= IFCRELDEFINESBYPROPERTIES('3879pkrnz3vB837RUdb793',#13,$,$,(#990),#1060);

#1067= IFCBEAM('0HUc2KqFj9nxHOdglyh_e$',#13,'BMR - 013',$,$,#1111,#1103,$);

#1084= IFCDIRECTION((1.,0.));

#1086= IFCCARTESIANPOINT((-100.,0.));

#1088= IFCAXIS2PLACEMENT2D(#1086,#1084);

#1089= IFCRECTANGLEPROFILEDEF(.AREA.,$,#1088,200.,200.);

#1090= IFCAXIS2PLACEMENT3D(#35,#30,#32);

#1091= IFCEXTRUDEDAREASOLID(#1089,#1090,#32,4000.0114);

#1092= IFCSHAPEREPRESENTATION(#40,'Body','SweptSolid',(#1091));

#1096= IFCCARTESIANPOINT((-100.,0.,-200.));

#1098= IFCBOUNDINGBOX(#1096,200.,4000.0114,200.);

#1099= IFCSHAPEREPRESENTATION(#106,'IAI','BoundingBox',(#1098));

#1103= IFCPRODUCTDEFINITIONSHAPE($,$,(#1092,#1099));

#1106= IFCDIRECTION((-1.,0.,0.));

#1108= IFCCARTESIANPOINT((4953.7731,14564.58,100.));

#1110= IFCAXIS2PLACEMENT3D(#1108,#32,#1106);

#1111= IFCLOCALPLACEMENT(#531,#1110);

#1113= IFCRELASSOCIATESMATERIAL('2iJMazpFf8lgQQbYBXVMFX',#13,$,$,(#1067),#121);

#1115= IFCPROPERTYSINGLEVALUE('Layername',$,IFCLABEL('Structural - Bearing'),$);

#1119= IFCPROPERTYSINGLEVALUE('Red',$,IFCINTEGER(0),$);

#1123= IFCPROPERTYSINGLEVALUE('Green',$,IFCINTEGER(191),$);

#1127= IFCPROPERTYSINGLEVALUE('Blue',$,IFCINTEGER(191),$);

#1131= IFCCOMPLEXPROPERTY('Color',$,'Color',(#1119,#1123,#1127));

#1136= IFCPROPERTYSET('2XHhsf2Lf2RBMpZ5PkRrA1',#13,'PSet_Draughting',$,(#1115,#1131));

#1141= IFCRELDEFINESBYPROPERTIES('3MAny780v4vfu34zAHec_r',#13,$,$,(#1067),#1136);

#1143= IFCBEAM('08wuDyunD8wu6qE2IoyxGY',#13,'BMR - 014',$,$,#1188,#1179,$);

#1160= IFCDIRECTION((1.,0.));

#1162= IFCCARTESIANPOINT((-100.,0.));

#1164= IFCAXIS2PLACEMENT2D(#1162,#1160);

#1165= IFCRECTANGLEPROFILEDEF(.AREA.,$,#1164,200.,200.);

#1166= IFCAXIS2PLACEMENT3D(#35,#30,#32);

#1167= IFCEXTRUDEDAREASOLID(#1165,#1166,#32,4000.);

#1168= IFCSHAPEREPRESENTATION(#40,'Body','SweptSolid',(#1167));

#1174= IFCBOUNDINGBOX(#1172,200.,4000.,200.);

#1175= IFCSHAPEREPRESENTATION(#106,'IAI','BoundingBox',(#1174));

#1179= IFCPRODUCTDEFINITIONSHAPE($,$,(#1168,#1175));

#1182= IFCDIRECTION((-1.,0.,0.));

#1184= IFCCARTESIANPOINT((10953.773,14564.58,100.));

#1187= IFCAXIS2PLACEMENT3D(#1184,#32,#1182);

#1188= IFCLOCALPLACEMENT(#531,#1187);

#1190= IFCRELASSOCIATESMATERIAL('0lHizFUC1DFPxWq9gS6cwg',#13,$,$,(#1143),#121);

#1192= IFCPROPERTYSINGLEVALUE('Layername',$,IFCLABEL('Structural - Bearing'),$);

#1196= IFCPROPERTYSINGLEVALUE('Red',$,IFCINTEGER(0),$);

#1200= IFCPROPERTYSINGLEVALUE('Green',$,IFCINTEGER(191),$);

#1204= IFCPROPERTYSINGLEVALUE('Blue',$,IFCINTEGER(191),$);

#1208= IFCCOMPLEXPROPERTY('Color',$,'Color',(#1196,#1200,#1204));

#1213= IFCPROPERTYSET('3WuVaZ4o9EuwSpUp4g8hdX',#13,'PSet_Draughting',$,(#1192,#1208));

#1218= IFCRELDEFINESBYPROPERTIES('0xcTMqD21BBu_aozd_0gnF',#13,$,$,(#1143),#1213);

#1220= IFCBEAM('0rU247F3n3Vwn2gcOzrhMD',#13,'BMR - 015',$,$,#1264,#1256,$);

#1237= IFCDIRECTION((1.,0.));

#1239= IFCCARTESIANPOINT((-100.,0.));

#1241= IFCAXIS2PLACEMENT2D(#1239,#1237);

#1242= IFCRECTANGLEPROFILEDEF(.AREA.,$,#1241,200.,200.);

#1243= IFCAXIS2PLACEMENT3D(#35,#30,#32);

#1244= IFCEXTRUDEDAREASOLID(#1242,#1243,#32,6000.);

#1245= IFCSHAPEREPRESENTATION(#40,'Body','SweptSolid',(#1244));

#1249= IFCCARTESIANPOINT((-100.,0.,-200.));

#1251= IFCBOUNDINGBOX(#1249,200.,6000.,200.);

#1252= IFCSHAPEREPRESENTATION(#106,'IAI','BoundingBox',(#1251));

#1256= IFCPRODUCTDEFINITIONSHAPE($,$,(#1245,#1252));

#1259= IFCDIRECTION((-1.9039598E-6,-1.,0.));

#1261= IFCCARTESIANPOINT((-1046.2269,10564.58,100.));

#1263= IFCAXIS2PLACEMENT3D(#1261,#32,#1259);

#1264= IFCLOCALPLACEMENT(#531,#1263);

#1266= IFCRELASSOCIATESMATERIAL('3JOxlC31n76g0U5M_$iDFO',#13,$,$,(#1220),#121);

#1268= IFCPROPERTYSINGLEVALUE('Layername',$,IFCLABEL('Structural - Bearing'),$);

#1272= IFCPROPERTYSINGLEVALUE('Red',$,IFCINTEGER(0),$);

#1276= IFCPROPERTYSINGLEVALUE('Green',$,IFCINTEGER(191),$);

#1280= IFCPROPERTYSINGLEVALUE('Blue',$,IFCINTEGER(191),$);

#1284= IFCCOMPLEXPROPERTY('Color',$,'Color',(#1272,#1276,#1280));

#1289= IFCPROPERTYSET('2BtF8NmNj2VwE24AWp4fw1',#13,'PSet_Draughting',$,(#1268,#1284));

#1296= IFCBEAM('1sy$S2ptT2Fw0cPfMh_dPR',#13,'BMR - 016',$,$,#1341,#1333,$);

#1314= IFCDIRECTION((1.,0.));

#1316= IFCCARTESIANPOINT((-100.,0.));

#1318= IFCAXIS2PLACEMENT2D(#1316,#1314);

#1319= IFCRECTANGLEPROFILEDEF(.AREA.,$,#1318,200.,200.);

#1320= IFCAXIS2PLACEMENT3D(#35,#30,#32);

#1321= IFCEXTRUDEDAREASOLID(#1319,#1320,#32,6000.);

#1322= IFCSHAPEREPRESENTATION(#40,'Body','SweptSolid',(#1321));

#1326= IFCCARTESIANPOINT((-100.,0.,-200.));

#1328= IFCBOUNDINGBOX(#1326,200.,6000.,200.);

#1329= IFCSHAPEREPRESENTATION(#106,'IAI','BoundingBox',(#1328));

#1333= IFCPRODUCTDEFINITIONSHAPE($,$,(#1322,#1329));

#1336= IFCDIRECTION((1.9039598E-6,-1.,0.));

#1338= IFCCARTESIANPOINT((4953.7731,10564.569,100.));

#1340= IFCAXIS2PLACEMENT3D(#1338,#32,#1336);

#1341= IFCLOCALPLACEMENT(#531,#1340);

#1343= IFCRELASSOCIATESMATERIAL('3a2tbFc9nFcPhOtYyB4a66',#13,$,$,(#1296),#121);

#1345= IFCPROPERTYSINGLEVALUE('Layername',$,IFCLABEL('Structural - Bearing'),$);

#1349= IFCPROPERTYSINGLEVALUE('Red',$,IFCINTEGER(0),$);

#1353= IFCPROPERTYSINGLEVALUE('Green',$,IFCINTEGER(191),$);

#1357= IFCPROPERTYSINGLEVALUE('Blue',$,IFCINTEGER(191),$);

#1361= IFCCOMPLEXPROPERTY('Color',$,'Color',(#1349,#1353,#1357));

#1366= IFCPROPERTYSET('2CPgc6W4zFR8NrIqXLPWh0',#13,'PSet_Draughting',$,(#1345,#1361));

#1371= IFCRELDEFINESBYPROPERTIES('0hSyvfWvf8WfEA1gbtCAJD',#13,$,$,(#1296),#1366);

#1373= IFCBEAM('3o18DrhYDEGh0yH0P5KC0o',#13,'BMR - 003',$,$,#1417,#1409,$);

#1390= IFCDIRECTION((1.,0.));

#1392= IFCCARTESIANPOINT((-100.,0.));

#1394= IFCAXIS2PLACEMENT2D(#1392,#1390);

#1395= IFCRECTANGLEPROFILEDEF(.AREA.,$,#1394,200.,200.);

#1396= IFCAXIS2PLACEMENT3D(#35,#30,#32);

#1397= IFCEXTRUDEDAREASOLID(#1395,#1396,#32,6000.);

#1398= IFCSHAPEREPRESENTATION(#40,'Body','SweptSolid',(#1397));

#1402= IFCCARTESIANPOINT((-100.,0.,-200.));

#1404= IFCBOUNDINGBOX(#1402,200.,6000.,200.);

#1405= IFCSHAPEREPRESENTATION(#106,'IAI','BoundingBox',(#1404));

#1409= IFCPRODUCTDEFINITIONSHAPE($,$,(#1398,#1405));

#1412= IFCDIRECTION((5.9211895E-16,-1.,0.));

#1414= IFCCARTESIANPOINT((-1046.2269,14564.58,100.));

#1417= IFCLOCALPLACEMENT(#531,#1416);

#1419= IFCRELASSOCIATESMATERIAL('3S9kBYwzbFc8wpMNE0XZhz',#13,$,$,(#1373),#121);

#1421= IFCPROPERTYSINGLEVALUE('Layername',$,IFCLABEL('Structural - Bearing'),$);

#1425= IFCPROPERTYSINGLEVALUE('Red',$,IFCINTEGER(0),$);

#1429= IFCPROPERTYSINGLEVALUE('Green',$,IFCINTEGER(191),$);

#1433= IFCPROPERTYSINGLEVALUE('Blue',$,IFCINTEGER(191),$);

#1437= IFCCOMPLEXPROPERTY('Color',$,'Color',(#1425,#1429,#1433));

#1443= IFCPROPERTYSET('1GBGDkytb23PXeVtlBKSp_',#13,'PSet_Draughting',$,(#1421,#1437));

#1448= IFCRELDEFINESBYPROPERTIES('1IFjLdB3P3ZQ56Wf8Bwvv6',#13,$,$,(#1373),#1443);

#1450= IFCBEAM('0B4YX2ilbBuP_iNfAYUdTp',#13,'BMR - 004',$,$,#1494,#1486,$);

#1467= IFCDIRECTION((1.,0.));

#1469= IFCCARTESIANPOINT((-100.,0.));

#1471= IFCAXIS2PLACEMENT2D(#1469,#1467);

#1472= IFCRECTANGLEPROFILEDEF(.AREA.,$,#1471,200.,200.);

#1473= IFCAXIS2PLACEMENT3D(#35,#30,#32);

#1474= IFCEXTRUDEDAREASOLID(#1472,#1473,#32,6000.);

#1475= IFCSHAPEREPRESENTATION(#40,'Body','SweptSolid',(#1474));

#1479= IFCCARTESIANPOINT((-100.,0.,-200.));

#1481= IFCBOUNDINGBOX(#1479,200.,6000.,200.);

#1482= IFCSHAPEREPRESENTATION(#106,'IAI','BoundingBox',(#1481));

#1486= IFCPRODUCTDEFINITIONSHAPE($,$,(#1475,#1482));

#1489= IFCDIRECTION((5.9211895E-16,-1.,0.));

#1491= IFCCARTESIANPOINT((4953.7731,14564.58,100.));

#1493= IFCAXIS2PLACEMENT3D(#1491,#32,#1489);

#1494= IFCLOCALPLACEMENT(#531,#1493);

#1496= IFCRELASSOCIATESMATERIAL('3cOtrc7HLFPAA3$_y$UH$3',#13,$,$,(#1450),#121);

#1498= IFCPROPERTYSINGLEVALUE('Layername',$,IFCLABEL('Structural - Bearing'),$);

#1502= IFCPROPERTYSINGLEVALUE('Red',$,IFCINTEGER(0),$);

#1506= IFCPROPERTYSINGLEVALUE('Green',$,IFCINTEGER(191),$);

#1510= IFCPROPERTYSINGLEVALUE('Blue',$,IFCINTEGER(191),$);

#1514= IFCCOMPLEXPROPERTY('Color',$,'Color',(#1502,#1506,#1510));

#1519= IFCPROPERTYSET('3sXj4ovdX78wNYmFGJ4WZy',#13,'PSet_Draughting',$,(#1498,#1514));

#1524= IFCRELDEFINESBYPROPERTIES('0gtcig6111Bf9EErav4SvI',#13,$,$,(#1450),#1519);

#1526=

IFCRELCONTAINEDINSPATIALSTRUCTURE('0YivUao1z0FfCtTaxSQddu',#13,'BuildingStoreyContainer','B uildingStoreyContainer for Building

Elements',(#542,#617,#692,#766,#841,#915,#990,#1067,#1143,#1220,#1296,#1373,#1450),#533);

#1528= IFCCARTESIANPOINT((0.,0.,6200.));

#1531= IFCLOCALPLACEMENT(#49,#1530);

#1533= IFCBUILDINGSTOREY('0L35HzKQPASQ7MJB3FLsbj',#13,'',$,$,#1531,$,$,.ELEMENT.,6200.);

#1542= IFCBEAM('0BplhxI_LFEPo0pf3ny338',#13,'BMR - 017',$,$,#1587,#1579,$);

#1559= IFCDIRECTION((1.,0.));

#1561= IFCCARTESIANPOINT((-100.,0.));

#1563= IFCAXIS2PLACEMENT2D(#1561,#1559);

#1564= IFCRECTANGLEPROFILEDEF(.AREA.,$,#1563,200.,200.);

#1565= IFCAXIS2PLACEMENT3D(#35,#30,#32);

#1566= IFCEXTRUDEDAREASOLID(#1564,#1565,#32,6000.);

#1567= IFCSHAPEREPRESENTATION(#40,'Body','SweptSolid',(#1566));

#1572= IFCCARTESIANPOINT((-100.,0.,-200.));

#1574= IFCBOUNDINGBOX(#1572,200.,6000.,200.);

#1575= IFCSHAPEREPRESENTATION(#106,'IAI','BoundingBox',(#1574));

#1579= IFCPRODUCTDEFINITIONSHAPE($,$,(#1567,#1575));

#1582= IFCDIRECTION((5.9211895E-16,-1.,0.));

#1584= IFCCARTESIANPOINT((-1046.2269,14564.58,100.));

#1586= IFCAXIS2PLACEMENT3D(#1584,#32,#1582);

#1587= IFCLOCALPLACEMENT(#1531,#1586);

#1589= IFCRELASSOCIATESMATERIAL('1DOddS_obEK9Wxo$twhv41',#13,$,$,(#1542),#121);

#1591= IFCPROPERTYSINGLEVALUE('Layername',$,IFCLABEL('Structural - Bearing'),$);

#1595= IFCPROPERTYSINGLEVALUE('Red',$,IFCINTEGER(0),$);

#1599= IFCPROPERTYSINGLEVALUE('Green',$,IFCINTEGER(191),$);

#1603= IFCPROPERTYSINGLEVALUE('Blue',$,IFCINTEGER(191),$);

#1607= IFCCOMPLEXPROPERTY('Color',$,'Color',(#1595,#1599,#1603));

#1612= IFCPROPERTYSET('3NFC4dhdnErADaTwBccYdZ',#13,'PSet_Draughting',$,(#1591,#1607));

#1617= IFCRELDEFINESBYPROPERTIES('3aGmcRrfXBUvMkqIFR63Da',#13,$,$,(#1542),#1612);

#1619= IFCBEAM('3jn7HianbDd9TdXEmTS88T',#13,'BMR - 018',$,$,#1663,#1655,$);

#1636= IFCDIRECTION((1.,0.));

#1638= IFCCARTESIANPOINT((-100.,0.));

#1640= IFCAXIS2PLACEMENT2D(#1638,#1636);

#1641= IFCRECTANGLEPROFILEDEF(.AREA.,$,#1640,200.,200.);

#1642= IFCAXIS2PLACEMENT3D(#35,#30,#32);

#1643= IFCEXTRUDEDAREASOLID(#1641,#1642,#32,6000.);

#1644= IFCSHAPEREPRESENTATION(#40,'Body','SweptSolid',(#1643));

#1648= IFCCARTESIANPOINT((-100.,0.,-200.));

#1650= IFCBOUNDINGBOX(#1648,200.,6000.,200.);

#1651= IFCSHAPEREPRESENTATION(#106,'IAI','BoundingBox',(#1650));

#1655= IFCPRODUCTDEFINITIONSHAPE($,$,(#1644,#1651));

#1660= IFCCARTESIANPOINT((4953.7731,14564.58,100.));

#1662= IFCAXIS2PLACEMENT3D(#1660,#32,#1658);

#1663= IFCLOCALPLACEMENT(#1531,#1662);

#1665= IFCRELASSOCIATESMATERIAL('0SRpigpGn8nf30f9i6oRMZ',#13,$,$,(#1619),#121);

#1667= IFCPROPERTYSINGLEVALUE('Layername',$,IFCLABEL('Structural - Bearing'),$);

#1671= IFCPROPERTYSINGLEVALUE('Red',$,IFCINTEGER(0),$);

#1675= IFCPROPERTYSINGLEVALUE('Green',$,IFCINTEGER(191),$);

#1679= IFCPROPERTYSINGLEVALUE('Blue',$,IFCINTEGER(191),$);

#1683= IFCCOMPLEXPROPERTY('Color',$,'Color',(#1671,#1675,#1679));

#1688= IFCPROPERTYSET('1mZfAynq12sh_y$hy3QMXV',#13,'PSet_Draughting',$,(#1667,#1683));

#1693= IFCRELDEFINESBYPROPERTIES('1LA_EtShr6kgUCK0fjmqsO',#13,$,$,(#1619),#1688);

#1695= IFCBEAM('2WnPkfQPz3LhAG0XB5BJMX',#13,'BMR - 019',$,$,#1740,#1732,$);

#1713= IFCDIRECTION((1.,0.));

#1715= IFCCARTESIANPOINT((-100.,0.));

#1717= IFCAXIS2PLACEMENT2D(#1715,#1713);

#1718= IFCRECTANGLEPROFILEDEF(.AREA.,$,#1717,200.,200.);

#1719= IFCAXIS2PLACEMENT3D(#35,#30,#32);

#1720= IFCEXTRUDEDAREASOLID(#1718,#1719,#32,4000.);

#1721= IFCSHAPEREPRESENTATION(#40,'Body','SweptSolid',(#1720));

#1725= IFCCARTESIANPOINT((-100.,0.,-200.));

#1727= IFCBOUNDINGBOX(#1725,200.,4000.,200.);

#1728= IFCSHAPEREPRESENTATION(#106,'IAI','BoundingBox',(#1727));

#1732= IFCPRODUCTDEFINITIONSHAPE($,$,(#1721,#1728));

#1735= IFCDIRECTION((-1.,-5.5511151E-17,0.));

#1737= IFCCARTESIANPOINT((-1046.2269,14564.58,100.));

#1739= IFCAXIS2PLACEMENT3D(#1737,#32,#1735);

#1740= IFCLOCALPLACEMENT(#1531,#1739);

#1742= IFCRELASSOCIATESMATERIAL('0Wh13JK9L5fRT51xpZYuEV',#13,$,$,(#1695),#121);

#1744= IFCPROPERTYSINGLEVALUE('Layername',$,IFCLABEL('Structural - Bearing'),$);

#1748= IFCPROPERTYSINGLEVALUE('Red',$,IFCINTEGER(0),$);

#1752= IFCPROPERTYSINGLEVALUE('Green',$,IFCINTEGER(191),$);

#1756= IFCPROPERTYSINGLEVALUE('Blue',$,IFCINTEGER(191),$);

#1760= IFCCOMPLEXPROPERTY('Color',$,'Color',(#1748,#1752,#1756));

#1765= IFCPROPERTYSET('1hRzlU3CP2C9lVTwsQCG_V',#13,'PSet_Draughting',$,(#1744,#1760));

#1770= IFCRELDEFINESBYPROPERTIES('1$AgwIofD1txOyDgTHxRve',#13,$,$,(#1695),#1765);

#1772= IFCBEAM('1UzS8Uq7D6N99M$XE$ncfO',#13,'BMR - 020',$,$,#1816,#1808,$);

#1789= IFCDIRECTION((1.,0.));

#1791= IFCCARTESIANPOINT((-100.,0.));

#1794= IFCRECTANGLEPROFILEDEF(.AREA.,$,#1793,200.,200.);

#1795= IFCAXIS2PLACEMENT3D(#35,#30,#32);

#1796= IFCEXTRUDEDAREASOLID(#1794,#1795,#32,4000.0114);

#1797= IFCSHAPEREPRESENTATION(#40,'Body','SweptSolid',(#1796));

#1801= IFCCARTESIANPOINT((-100.,0.,-200.));

#1803= IFCBOUNDINGBOX(#1801,200.,4000.0114,200.);

#1804= IFCSHAPEREPRESENTATION(#106,'IAI','BoundingBox',(#1803));

#1808= IFCPRODUCTDEFINITIONSHAPE($,$,(#1797,#1804));

#1811= IFCDIRECTION((-1.,0.,0.));

#1813= IFCCARTESIANPOINT((4953.7731,14564.58,100.));

#1815= IFCAXIS2PLACEMENT3D(#1813,#32,#1811);

#1816= IFCLOCALPLACEMENT(#1531,#1815);

#1818= IFCRELASSOCIATESMATERIAL('2r6fQGujj6ieelB4uQN022',#13,$,$,(#1772),#121);

#1820= IFCPROPERTYSINGLEVALUE('Layername',$,IFCLABEL('Structural - Bearing'),$);

#1824= IFCPROPERTYSINGLEVALUE('Red',$,IFCINTEGER(0),$);

#1829= IFCPROPERTYSINGLEVALUE('Green',$,IFCINTEGER(191),$);

#1833= IFCPROPERTYSINGLEVALUE('Blue',$,IFCINTEGER(191),$);

#1837= IFCCOMPLEXPROPERTY('Color',$,'Color',(#1824,#1829,#1833));

#1842= IFCPROPERTYSET('1Kp3ZOvbDELfeQHnhmqBoe',#13,'PSet_Draughting',$,(#1820,#1837));

#1847= IFCRELDEFINESBYPROPERTIES('21Ex33umX7UwvRqABmJbkd',#13,$,$,(#1772),#1842);

#1849= IFCBEAM('2ri4$gGfTDVgxC_aMhb2R3',#13,'BMR - 021',$,$,#1893,#1885,$);

#1866= IFCDIRECTION((1.,0.));

#1868= IFCCARTESIANPOINT((-100.,0.));

#1870= IFCAXIS2PLACEMENT2D(#1868,#1866);

#1871= IFCRECTANGLEPROFILEDEF(.AREA.,$,#1870,200.,200.);

#1872= IFCAXIS2PLACEMENT3D(#35,#30,#32);

#1873= IFCEXTRUDEDAREASOLID(#1871,#1872,#32,4000.);

#1874= IFCSHAPEREPRESENTATION(#40,'Body','SweptSolid',(#1873));

#1878= IFCCARTESIANPOINT((-100.,0.,-200.));

#1880= IFCBOUNDINGBOX(#1878,200.,4000.,200.);

#1881= IFCSHAPEREPRESENTATION(#106,'IAI','BoundingBox',(#1880));

#1885= IFCPRODUCTDEFINITIONSHAPE($,$,(#1874,#1881));

#1888= IFCDIRECTION((-1.,0.,0.));

#1890= IFCCARTESIANPOINT((10953.773,14564.58,100.));

#1892= IFCAXIS2PLACEMENT3D(#1890,#32,#1888);

#1893= IFCLOCALPLACEMENT(#1531,#1892);

#1895= IFCRELASSOCIATESMATERIAL('1r9zsMbGT5auckxuSciHI3',#13,$,$,(#1849),#121);

#1897= IFCPROPERTYSINGLEVALUE('Layername',$,IFCLABEL('Structural - Bearing'),$);

#1905= IFCPROPERTYSINGLEVALUE('Green',$,IFCINTEGER(191),$);

#1909= IFCPROPERTYSINGLEVALUE('Blue',$,IFCINTEGER(191),$);

#1913= IFCCOMPLEXPROPERTY('Color',$,'Color',(#1901,#1905,#1909));

#1918= IFCPROPERTYSET('0_gVydSdL2Rx8XwqJxoBeQ',#13,'PSet_Draughting',$,(#1897,#1913));

#1923= IFCRELDEFINESBYPROPERTIES('1hxitXAC58zwQUOw4BV9kD',#13,$,$,(#1849),#1918);

#1925= IFCBEAM('2N$HtruaDEyBzAcwrtQcqn',#13,'BMR - 022',$,$,#1970,#1962,$);

#1942= IFCDIRECTION((1.,0.));

#1944= IFCCARTESIANPOINT((-100.,0.));

#1946= IFCAXIS2PLACEMENT2D(#1944,#1942);

#1947= IFCRECTANGLEPROFILEDEF(.AREA.,$,#1946,200.,200.);

#1948= IFCAXIS2PLACEMENT3D(#35,#30,#32);

#1949= IFCEXTRUDEDAREASOLID(#1947,#1948,#32,6000.);

#1950= IFCSHAPEREPRESENTATION(#40,'Body','SweptSolid',(#1949));

#1955= IFCCARTESIANPOINT((-100.,0.,-200.));

#1957= IFCBOUNDINGBOX(#1955,200.,6000.,200.);

#1958= IFCSHAPEREPRESENTATION(#106,'IAI','BoundingBox',(#1957));

#1962= IFCPRODUCTDEFINITIONSHAPE($,$,(#1950,#1958));

#1965= IFCDIRECTION((-1.9039598E-6,-1.,0.));

#1967= IFCCARTESIANPOINT((-1046.2269,10564.58,100.));

#1969= IFCAXIS2PLACEMENT3D(#1967,#32,#1965);

#1970= IFCLOCALPLACEMENT(#1531,#1969);

#1972= IFCRELASSOCIATESMATERIAL('1yimdA0drBmRVBcOH418q7',#13,$,$,(#1925),#121);

#1974= IFCPROPERTYSINGLEVALUE('Layername',$,IFCLABEL('Structural - Bearing'),$);

#1978= IFCPROPERTYSINGLEVALUE('Red',$,IFCINTEGER(0),$);

#1982= IFCPROPERTYSINGLEVALUE('Green',$,IFCINTEGER(191),$);

#1986= IFCPROPERTYSINGLEVALUE('Blue',$,IFCINTEGER(191),$);

#1990= IFCCOMPLEXPROPERTY('Color',$,'Color',(#1978,#1982,#1986));

#1995= IFCPROPERTYSET('2b7ShBZQP49fbWeYc3P0iR',#13,'PSet_Draughting',$,(#1974,#1990));

#2000= IFCRELDEFINESBYPROPERTIES('2N5WizrVr3xvUpKg9VwG3j',#13,$,$,(#1925),#1995);

#2002= IFCBEAM('2eWXH0QOP8RujV4XZQA_Zh',#13,'BMR - 023',$,$,#2046,#2038,$);

#2019= IFCDIRECTION((1.,0.));

#2021= IFCCARTESIANPOINT((-100.,0.));

#2023= IFCAXIS2PLACEMENT2D(#2021,#2019);

#2024= IFCRECTANGLEPROFILEDEF(.AREA.,$,#2023,200.,200.);

#2025= IFCAXIS2PLACEMENT3D(#35,#30,#32);

#2026= IFCEXTRUDEDAREASOLID(#2024,#2025,#32,6000.);

#2027= IFCSHAPEREPRESENTATION(#40,'Body','SweptSolid',(#2026));

#2031= IFCCARTESIANPOINT((-100.,0.,-200.));

#2034= IFCSHAPEREPRESENTATION(#106,'IAI','BoundingBox',(#2033));

#2038= IFCPRODUCTDEFINITIONSHAPE($,$,(#2027,#2034));

#2041= IFCDIRECTION((1.9039598E-6,-1.,0.));

#2043= IFCCARTESIANPOINT((4953.7731,10564.569,100.));

#2045= IFCAXIS2PLACEMENT3D(#2043,#32,#2041);

#2046= IFCLOCALPLACEMENT(#1531,#2045);

#2048= IFCRELASSOCIATESMATERIAL('0WyesydxHEmht1wcoDoFmr',#13,$,$,(#2002),#121);

#2050= IFCPROPERTYSINGLEVALUE('Layername',$,IFCLABEL('Structural - Bearing'),$);

#2054= IFCPROPERTYSINGLEVALUE('Red',$,IFCINTEGER(0),$);

#2058= IFCPROPERTYSINGLEVALUE('Green',$,IFCINTEGER(191),$);

#2062= IFCPROPERTYSINGLEVALUE('Blue',$,IFCINTEGER(191),$);

#2066= IFCCOMPLEXPROPERTY('Color',$,'Color',(#2054,#2058,#2062));

#2071= IFCPROPERTYSET('3SXSNy2Uj5A9mp3RIPbhkm',#13,'PSet_Draughting',$,(#2050,#2066));

#2076= IFCRELDEFINESBYPROPERTIES('1M0AAiX5DFAP8SSps0sZ_9',#13,$,$,(#2002),#2071);

#2078=

IFCRELCONTAINEDINSPATIALSTRUCTURE('0nL8q_j0vBPONVSess5_Lk',#13,'BuildingStoreyContainer',' BuildingStoreyContainer for Building Elements',(#1542,#1619,#1695,#1772,#1849,#1925,#2002),#1533);

#2080= IFCRELAGGREGATES('1safrieJD9b92OIgJK3UG5',#13,'BuildingContainer','BuildingContainer for BuildigStories',#51,(#63,#533,#1533));

#2083= IFCRELAGGREGATES('0IxDOANL59eOqUED2a$sO$',#13,'ProjectContainer','ProjectContainer for Sites',#42,(#51));

ENDSEC;

END-ISO-10303-21;

附件二

Joint data 18

-104,1456,0 -104,1456,310 495,1456,0 495,1456,310 -104,1056,0 -104,1056,310 495,1056,0 495,1056,310 1095,1456,0 1095,1456,310 1095,1056,0 1095,1056,310 495,1456,620 -104,1056,620 495,1056,620 1095,1456,620 1095,1056,620 -104,1456,620 Support data 6

1,1,1,1,1,1,1 3,1,1,1,1,1,1 5,1,1,1,1,1,1 7,1,1,1,1,1,1 9,1,1,1,1,1,1 11,1,1,1,1,1,1

Material property data 1

217370

Cross-sectional property data 2

900,67500,67500 400,13333,13333

Member data 11,12,1,1 4,13,1,1 6,14,1,1 8,15,1,1 10,16,1,1 12,17,1,1 2,18,1,1 2,6,1,2 4,8,1,2 10,12,1,2 6,8,1,2 8,12,1,2 2,4,1,2 4,10,1,2 18,13,1,2 13,16,1,2 18,14,1,2 13,15,1,2 16,17,1,2 14,15,1,2 15,17,1,2

在文檔中 IFC建築資訊內容應用於結構分析資料擷取 (頁 49-102)

建議

第五章 轉換分析模型資訊

6.2 建議

參考文獻

http://www.iai-international.org/。

http://www.iai-international.org/。

http://www.iai-international.org/。

http://www.iai-international.org/。

IfcGloballyUniqueId

IfcOwnerHistory

IfcLabel

IfcText

IfcLabel

IfcLabel

IfcLabel

IfcRepresentationContext

IfcUnitAssignment

IfcGloballyUniqueId

IfcOwnerHistory

IfcLabel

IfcText

IfcLabel

IfcObjectPlacement

IfcProductRepresentation

IfcLabel

IfcElementCompositionEnum

IfcCompoundPlaneAngleMeasure

IfcCompoundPlaneAngleMeasure

IfcLengthMeasure

IfcLabel

IfcPostalAddress

IfcGloballyUniqueId

IfcOwnerHistory

IfcLabel

IfcText

IfcLabel

IfcObjectPlacement

IfcProductRepresentation

IfcLabel

IfcElementCompositionEnum

IfcLengthMeasure

IfcLengthMeasure

IfcPostalAddress

IfcGloballyUniqueId

IfcOwnerHistory

IfcLabel

IfcText

IfcLabel

IfcObjectPlacement

IfcProductRepresentation

IfcLabel

IfcElementCompositionEnum

IfcLengthMeasure

IfcGloballyUniqueId

IfcOwnerHistory

IfcLabel

IfcText

IfcLabel

IfcObjectPlacement

IfcProductRepresentation

IfcIdentifier

IfcProfileTypeEnum

IfcLabel

IfcAxis2Placement2D

IfcPositiveLengthMeasure

IfcProfileTypeEnum

IfcLabel

IfcAxis2Placement2D

IfcPositiveLengthMeasure

IfcProfileTypeEnum

IfcLabel

IfcCurve

IfcCartesianPoint

附件一

附件二

第五章轉換分析模型資訊