感測標籤元件資訊的修改與刪除

系統亦提供感測標籤的修改與刪除操作，感測標籤包含 RFID 標籤與 GPS 接收 器，兩者管理方式相同，以 RFID 標籤為例，首先說明感測標籤的修改方式。在主 視窗左上方功能表中選擇「設備管理-RFID 設備-Tag 管理」，在程式出現 RFID 標籤 管理視窗時，於列表中選擇欲修改的 RFID 標籤，視窗下方會隨即顯示標籤資訊和 元件模型的預覽。點選左上方「編輯」按鈕，系統會判斷所選擇標籤的屬性隨即會 出現對應的屬性視窗，輸入需更改的資料後點選下方「修改」按鈕即可完成感測標 籤資訊的修改，流程如圖 44 所示。

圖 44. 感測標籤資訊的修改

於 RFID 標籤管理視窗中選擇欲刪除的 RFID 標籤，並點選上方「刪除」按鈕，

系統隨即會出現確認視窗，於確認後系統會將此 RFID 標籤自感測定位資料庫中刪 除，完成感測標籤的刪除步驟，流程如圖 45 所示。

圖 45. 感測標籤資訊的刪除

4 參考文獻：

Akinci, B., Fischer, M. and Kunz, J. (2002), “Automated Generation of Work Spaces Required by Construction Activities”, Journal of Construction Engineering and Management, vol.128, no.4, p.306–315.

Aouad, Ghassan, Wu, Song, and Lee, Angela (2006), “nDimensional Modeling Technology:

Past, Present, and Future”, Journal of Computing in Civil Engineering, vol.20, Issue 3, p.151–153.

Bean Markup Language, “Bean Markup Language”, http://www.alphaworks.ibm.com/formula/bml.

Bray, T., Jean Paoli, C. M. Sperberg-McQueen, Eve Maler (Eds.) (2000), “Extensible Markup Language(XML) 1.0 (2nd Edition)”, W3C Recommendation, http://www.w3.org/TR/2000/REC-xml-2001006.

Chau, K.W., Anson, M. and Zhang, J. P. (2004), “Four-Dimensional Visualization of Construction Scheduling and Site Utilization”, Journal of Construction Engineering and Management, vol.130, no.4, p.598–606.

Chen, H.-M. and Hsieh, J.-W. (2008), “Integration of Design and Analysis Systems Using XML Transformation”, Proceedings of The 12th International Conference on Computing in Civil and Building Engineering (ICCCBE-XII).

Chin, Sangyoon, Yoon, Suwon, Choi, Cheolho and Cho, Changyon (2008), “RFID+4D CAD for Progress Management of Structural Steel Works in High-Rise Buildings”, Journal of Computing in Civil Engineering, vol.22, no.2, 2008, p.74–89.

Chou, Pai H. and Park, Chulsung (2005), “Energy-efficient platform designs for real-world wireless sensing applications”, IEEE/ACM International Conference on Computer-Aided Design, Digest of Technical Papers, ICCAD, vol.2005, p.912–919

Clayton, M.J., Wardena, R.B. and Parker, T.W. (2002), “Virtual construction of architecture using 3D CAD and simulation”, Automation in Construction, vol.11, no.2, p.227–235.

Deng, Xue Yuan, P.Chang, Tse-Youn (2006), “Creating structural model from IFC-based architectural model”, Joint International Conference on Computing and Decision Making in Civil and Building Engineering, June 14-16, 2006 – Montreal Canada, p.3687–3695.

Haque, Mohammed E. and Mishra, Rajmohan (2007), “5D Virtual Constructions:

Designer/Constructor’s Perspective”, 2007 10th International Conference on Computer and Information Technology, ICCIT, 2007 10th International Conference on Computer and Information Technology, ICCIT, 2007, p.457–477.

Harold, E. R. (1999), “XML Bible”, IDG Books Worldwide, Inc.

Hijazi, Wissam, Alkass P, Sabah, Tarek and Zayed (2009), “Constructability assessment using BIM/4D CAD simulation model”, AACE International Transactions, 53rd AACE International Annual Meeting 2009

ISPRS, German Society for Photogrammetry and Remote Sensing (DGPF), European Spatial Data Research (EuroSDR) and University of Bonn (2005), “Next Generation 3D City Models”, First International Workshop on Next Generation 3D City Models, 21th -22th June, Bonn, Germany.

J. Benner, A. Geiger and Leinemann, K. (2005), “Flexible Generation of Semantic of 3D Building Models”, First International Workshop on Next Generation 3D City Models, EuroSDR Publication #49, Bonn.

Jongeling, Rogier and Olofsson, Thomas (2007), “A method for planning of work-flow by combined use of location-based scheduling and 4D CAD”, Automation in Construction, vol.16, no.2, March, 2007, p. 189–198.

Kamat, V.R. and Martinez, J. C. (2003), “Automated generation of dynamic, operations level virtual construction scenarios”, Electronic Journal of Information Technology in Construction, ITcon, vol.8, p.65–84.

Kim, Hyunjoo and Grobler, Francois (2009), “Design coordination in building information modeling (BIM) using ontological consistency checking”, Proceedings of the 2009 ASCE International Workshop on Computing in Civil Engineering, vol.346, p.410–420

Kim, Seong-Ah, Chin, Sangyoon, Yoon, Su-Won, Shin, Tae-Hong, Kim, Yea-Sang and Choi, Cheolho (2009), “Automated Building Information Modeling System for Building Interior to Improve Productivity of BIM-base Quantity Take-Off”, Proceedings of the 26th Annual International Symposium on Automation and Robotics in Construction, ISARC 2009, June, p.492–496

Kim, W., Lim, H.C., Kim, O., Choi, Y.K. and Lee I.-S. (2001), “Visualized Construction Process on Virtual Reality”, Proceedings of the Fifth International Conference on Information Visualisation, p.684–689.

Koch, Thomas (1999), “XML in Practice: The Groupware Case”, IEEE 8th International Workshops on Enabling Technologies: Infrastructure for Collaborative Enterprises, p.16–18.

Koo, B. and Fischer, M. (2000), “Feasibility Study of 4D CAD in Commercial Construction”, Journal of Construction Engineering and Management, vol.126, no.4, p.251–260.

Kubicki, S., Guerriero, A. and Johannsen, L. (2009), “A service-based innovation process for improving cooperative practices in AEC”, ITcon vol.14, Special Issue Building Information Modeling Applications, Challenges and Future Directions, p.654–673, http://www.itcon.org/2009/43

Kuprenas, John A. and Mock, Chris S. (2009), “Collaborative BIM modeling case study - Process and results”, Proceedings of the 2009 ASCE International Workshop on Computing in Civil Engineering, vol.346, p.431–441

Lee McCuen, Tamera (2008), “Scheduling, estimating, and BIM: A profitable combination”, AACE International Transactions, 2008 AACE International Transactions - The 52nd Annual Meeting of AACE International and the 6th World Congress of ICEC on Cost Engineering, Project Management, and Quantity Surveying

Legg, Gary (2004), “ZigBee:Wireless Technology for Low-Power Sensor Networks”, TechOnline Publication.

Lei, Xu (2008), “Development of the Digital Environmental Assessment Tool with Building Information Model”, Proceedings of 12th International Conference on Computing in Civil and Building Engineering & 2008 International Conference on Information Technology in Construction, October, p.330

Liu, H.Y., Small, J.C. and Carter, J.P. (2007), “Full 3D modelling for effects of tunnelling on existing support systems in the Sydney region”, Tunnelling and Underground Space Technology, vol.23, no.4, p.399–420.

Ma, Zhaoyang, Shen, Qiping and Zhang, Jianping (2005), “Application of 4D for dynamic site layout and management of construction projects”, Automation in Construction, vol.14, no.3, June, 2005, International Conference for Construction Information Technology, p.369–381.

Martin, Didier, Birbeck, Mark, Kay, Michael, Loesgen, Brian, Pinnock, Jon, Livingstone, Steven, Stark, Peter, Williams, Kevin, Anderson, Richard, Mohr, Stephen, Baliles, David, Peat, Bruce, and Ozu, Nikola (2000), “Professional XML”, Wrox Press Inc.

McKinney, K., Kunz, J. and Fischer, M. (1998), “Visualization of construction planning information”, Proceedings of the 3rd International Conference on Intelligent User Interfaces, p.135–138.

Miller, Andrew (2007), “BIM for all in construction”, Structural Engineer, vol.85, no.13, p.34–36

Nour, M. (2009), “Performance of different (BIM/IFC) exchange formats within private collaborative workspace for collaborative work”, ITcon vol.14, Special Issue Building Information Modeling Applications, Challenges and Future Directions, p.736–752, http://www.itcon.org/2009/48

Open Financial Exchange, “Interactive Financial exchange”, http://www.ifxforum.org/.

Schlueter, Arno and Thesseling, Frank (2009), “Building information model based energy/exergy performance assessment in early design stages”, Automation in Construction, vol.18, no.2, p.153–163

Succar, Bilal (2009), “Building information modeling framework: A research and delivery foundation for industry stakeholders, Automation in Construction”, vol.18, no.3, p.357–375 Tamada, Takashi, Nakamura, Yasuaki and Takeda, Shoichi IECON’94 (1994), “An Efficient 3D

Object Management and Interactive Walkthrough for the 3D Facility Management System”, 20th International Conference on Industrial Electronics, Control and Instrumentation, vol.3, 5th-9th September, p.1937–1941.

Tse, Kenny T.C., Wong, Andy K.D. and Wong, Francis K.W. (2005), “Modeling Objects and Interfaces in Building Information Modeling”, ASCE International Conference on Computing in Civil Engineering, p. 40.

Vanlande, Renaud and Nicolle, Christophe ICDIM’07 (2007), “Semantic Web Technologies for Facilities Management”, 2nd International Conference on Digital Information Management, vol.1, 28th-31th October, p.327–332.

Vries, Bauke de and Harink, Jeroen M.J. (2007), “Generation of a construction planning from a 3D CAD model”, Automation in Construction, vol.16, no.1, January, 2007, p.13–18.

Wang, H.J., Zhang,J.P., Chau, K.W. and Anson M., (2004), “4D dynamic management for construction planning and resource utilization”, Automation in Construction, vol.13, no.5 SPEC. ISS., September, 2004, p.575–589

Webb, Robert M., Smallwood, John and C.Haupt, Theo (2004), “The potential of 4D CAD as a

tool for construction management”, Journal of Construction Research, vol.5, no.1, March, 2004, p.43–60.

Worldwide Web Consortium, “XML 1.0”, http://www.w3.org/XML.

XML-CML.ORG, “The Site for Chemical Markup Language”, http://www.xml-cml.org/.

Yasaka, Ayako, Kataoka, Hiromi (2006), “The development of the RC structural model on IFC Spec”, Joint International Conference on Computing and Decision Making in Civil and Building Engineering, June 14-16, 2006 – Montreal Canada, p.3116–3125.

You, Huei-Shyang, Wang, Tzu-Chi, Chang, Wen-Yao, Lai, Chih-Wei, Lee, Ming-Wei and Zuo, Kei-Wei (2004), “Unified Framework for Facility Condition Monitoring, Detection, and Diagnostics”, Semiconductor Manufacturing Technology Workshop Proceedings, p.41–46.

Zhili, Gao, Ganapathy, Mahalingam and Nguyen, Tang-Hung (2008), “Applications of Building Information Modeling (BIM) in the Design and Construction Process”, Proceedings of 12th International Conference on Computing in Civil and Building Engineering & 2008 International Conference on Information Technology in Construction, October, p.313

表 Y04

2011/6/29 ~ 2011/7/02 Seoul, Korea

本會核定

補助文號 NSC 99-2221-E-011-112- 會議

名稱

28^th International Symposium on Automation and Robotics in Construction (ISARC 2011)

發表 論文 題目

Multi-disciplinary Design Collaboration for Developing a BIM Model Using a Hybrid Client-Server and P2P Network Model

報告內容應包括下列各項：

一、參加會議經過

所 參 加 的 國 際 會 議 為 International Symposium on Automation and Robotics in Construction，其是 IAARC(The International Association for Automation and Robotics in Construction)組織針對「營建自動化」領域每年定期舉辨的國際研討會，其主要目的是

我個人於 7 月 1 日下午於名為 Collaborative Design and Construction 之 SESSION 中 發表名為” Multi-disciplinary Design Collaboration for Developing a BIM Model Using a Hybrid Client-Server and P2P Network Model”之論文，過程均非常順利，演說完畢後也獲 得與會者的興趣與問題討論回應，除此之外，三天與會的過程中也與來自美國、歐洲、

日本、韓國、印度、以及國內其他與會學者有充分的討論與交流。本會議所涵蓋的討論 主題非常廣泛，個人最感興趣且的是有關建築資訊模型、電腦視覺化與電腦輔助設計技 術、機器人技術應用、以及網路協同設計等在營建工程領域的研究發表，參與相關的 SESSIONS 有 Building Information Modeling (I)、Building Information Modeling (II)、

Automation and Robotics in Building Construction (III)、Augmented and Virtual Reality、

Computing in Construction and Management (V)、Collaborative Design and Construction 等，這些相關主題分布於在兩天會期內。

附件三