未來目標

在本論文，我們利用有限元素法與互補問題，來分別進行結構分析與接觸摩擦分析

，而在未來可以再探討的部分，包括如下：

1.在微機電系統中，其結構上都是三維的，所以我們可以針對在三維空間時的微機電系 統結構所產生的接觸摩擦力來做分析與探討。

2.由於在探討在三維空間的微機電系統結構時，所產生的變數會變的相當龐大與複雜，

計算將非常耗時，所以我們可以來探討如何改善耦合模擬分析之效率。

63

參考文獻

[1].Sergej Fatikow & Ulrich Rembold, “微機電系統概論”, 高立圖書有限公司, 2000.

[2].L. L. Mercado, Senior Member, S. M. Kuo, T. Yu Tom Lee, and L. Lin,

“Mechanics-based solutions to rf mems switch stiction problem”, IEEE Transactions on Componets and Packaging Technolgies, vol. 27, no. 3, pp. 560-576, Sept 2004.

[3].L. Li, J.G. Brown and D. Uttamchandani, ” Flexing of scratch drive actuator plates:

modeling and experimentation”, IEEE Proc.-Sci. Meas. Technol., vol. 151, no. 3, pp.

137-141, May 2004.

[4].廖信&王裕強, “網版印刷在微光機電系統製程之應用”,印刷科技, vol. 24, no. 1,pp.33- 54.

[5].趙詠雪, “微機械－微致動器未來展望”, 工研院IEK系統能源組, 2000.

[6].U. Beerschwinger, N. G. Milne, S. J. Yang, R. L. Reuben, A. J. Sangster, and H. Ziad,

“Coupled electrostatic and mechanical FEA of a micromotor,” Journal of Microelectromechanical Systems, Vol. 3, No. 4, pp. 162-171, 1994.

[7].J. M. Funk, J. G. Korvink, J. Buhler, M. Bachtold, and H. Baltes, “SOLIDS: A tool for microactuator simulation in 3-D,” Journal of Microelectromechanical Systems, Vol. 6, No.

1, pp. 70-82, 1997.

[8].N. R. Aluru and J. White, “An efficient numerical technique for electromechanical simulation of complicated microelectromechanical structures,” Sensors and Actuators A:

Physical, Vol. 58, pp. 1-11, 1997.

[9].N. R. Aluru and J. White, ”A Multilevel newton method for mixed-energy domain simulation of mems”, Journal of microelectromechanical systems, vol. 8, no. 3, pp.

299-308, Sept 1999.

[10].L. D. Gabby, J. E. Mehner, and S. D. Senturia, “Computer-aided generation of Nonlinear reduced-order dynamic macromodels — I: non-stress-stiffened case,” Journal of

64

Microelectromechanical Systems, Vol. 9, No. 2, pp. 262-269, 2000.

[11].B. McCarthy, G. G. Adams, N. E. McGruer and D. Potter, ”A dynamic model, Including contact bounce of an electrostatically actuated microswitch”, Journal of microelectromechanical systems, vol. 11, no. 3, pp. 276-283, June 2002.

[12].楊毅杰, “磁致動微機電系統顯示元件”, 碩士論文, 微機電系統工程研究所, 國立清 華大學, 2006.

[13].陳雄章, “抓爬式靜電為致動器之模擬極低電壓輸出特性的改善, 博士論文, 機械工 程系所, 國立交通大學, 2010.

[14].M. I. Younis, E. M. Abdel-Rahmsn and A.Nayfeh, “A reduced-order model for electrically actuated microbeam-based mems”, Journal of microelectromechanical systems, vol. 12, no.5, pp. 672-680, Octob 2003.

[15].林柏賢, “側推式微結構濾波器之設計”, 碩士論文, 電機工程研究所, 義守大學, 2009.

[16].Y. Kanno1, J. A. C. Martin and A. Pinto da Costa, ”Three-dimensional quasi-static frictional contact by using second-order cone linear complementarity problem”, International Journal for Numerical Methods in Engineering, vol. 65, pp. 62-83, Janu 2006.

[17].SAEED MOAVENI, 有限元素分析-理論與應用 ANSYS, 台灣培生教育出版股份有 限公司, 2001.

[18].Huebner, Thornton, “有限元素法”, 曉園出版社, 1985.

[19].劉曜禎, “具波桑比性質之細胞型材料之有線元素分析”, 碩士論文, 機械工程研究 所, 國立中央大學, 2002.

[20].趙啟祥, “B-Splin 有限元素法於二維平面應力問題之研究”, 碩士論文, 機械工程研 究所, 國立成功大學, 2007.

[21].Oktay Ural, “有限元素法導論”, 科技圖書股份有限公司, 1990.

[22].Tayllor, Hughes, “有限元素法程式 -解Navier-Stokes 方程式-, 科技圖書股份有限公

65

司, 1988.

[23].K. P. Edwin Chong and Stanislaw H.Zak, An introduction to optimization, New York, Wiley, 2001.

[24]. R. L. Radin, Optimization on operations research, New Jersey, Prentice-Hall, 1998.

[25].夸克工作室, “有限元素分析(基礎篇) ANSYS 與 Matlab”, 知城數位科技股份有限 公司, 2001.

[26].X. Zhang ,S. Liu and Z. Liu, “A predictor-corrector smoothing method for second-order cone programming”, J Appl Math Comput, vol. 32 pp. 369-381, 2010.

[27].Y. Kanno and M. Ohsaki, “Minimum principle of complementary energy of cable netwo- rks by using second-order cone programming”, International Journal of Solids and Struc- tures, vol. 40, pp. 4437–4460, 2003.

[28].陳怡靜, “含雜訊支撐向量回歸使用二級錐規劃”, 碩士論文, 電機工程研究所, 義守 大學, 2008.