第五章 結論與未來規劃
5.2 未來規劃
隨著靈活交流輸電技術的發展,超導技術與電力電子技術的結合,使得故障電流 限制器在輸配電網的應用研究已成為 21 世紀電網技術發展的前瞻研究主題之一。另,
考慮FCL 之必要性與優點及電力系統之需求,決定不同技術之 FCL 及其適當地應用是相 當重要外,AFCL 與電力系統原有保護裝置的配合、電力系統中的參數最佳化、電力系 統調度控制策略、安裝地點選擇以及超導線圈之低溫系統的設計和絕緣等一系列之實務 應用問題,仍有待進專家學者持續投入研究與探討。
63
參考文獻
[1] 永續能源政策綱領,http://www.ey.gov.tw/policy4/cp.aspx?n=E4707ED5C6C73F4B [2] CIGRE Working Group A3. 10 Reports, “Fault current limiters in electrical medium and
high voltage systems,” CIGRE Technical Brochure, 2003.
[3] S. Eckrosd, “Survey of fault cuttent limiter (FCL) technologies,” EPRI. Palo Alto, CA, 2005.
[4] S. Eckrosd, “Survey of fault cuttent limiter (FCL) technologies-update,” EPRI. Palo Alto, CA, 2008.
[5] H. Shimizu, “Application and feasibility of fault curent limiters in power systems,”
Electra 262, Technical Brochure 497, 2012.
[6] P. G. Slade, J. L. Wu, and E. J. Stacey et al, “The utility requirements for a distribution fault current limiter,” IEEE Trans. on Power Delivery , 7(2) , pp. 507- 515, 1992.
[7] H. Shimizu, “Current state and trends of fault current limiting technology,” IEEJ Trans.
on Power Electronics, 125(1), pp. 1-4, 2005.
[8] D. Kamolyabutra, M. Yasunori, and T. Kiiciro, “System stabilizing controland current limiting by a SMES with a series phase compensator,” IEEE Trans. on Applied Superconductivitys, 11(1), pp. 1753-1756, 2001.
[9] D. Kamolyabutra, M. Yasunori, and T. Kiiciro, “System stabilizing controland current limiting by a SMES with a series phase compensator,” IEEE Trans. on Applied Superconductivitys, 11(1), pp. 1753-1756, 2001.
[10] T. Nomura, M. Yamaguchi, and S. Fukui et al, “Single DC reactor type fault current limiter for 6.6KV power system,” IEEE Trans. on Applied Superconductivity, 11(1), pp.
2090-2093, March 2001.
64
[11] M. Steurer, M. Noe, and F.Breuer, “Fault current limiters-R&D status of two selected projects and emerging utility integration issues,” Proceedings of the IEEE PES General Meeting, 2(1), ,pp.1423-1425, June2004.
[12] Cigre Report 239, “Fault current limiters in electrical medium and high voltage systems,” Cigre Inc., 2003.
[13] B. W. Lee, J. Sim, and K. B. Park et al, “Practical application issues of superconducting fault current limiters for electric power systems,” IEEE Trans. on Applied Superconductivity, 18(2), pp. 620-623, 2008.
[14] D. Jioka, Y. Yokomizu, and T. Matsumura, “Determination of impedance of impedance of fault current limiter in distribution system with generator based on linear network analysis,” Proceedings of the International Conference on Future Power Systems, pp.1-4, Nov. 2005.
[15] H.Yamaguchi and T. Kataoka, “Effect of magnetic saturation on the current limiting characteristics of transformer type superconducting fault cerrent limiter,” IEEE Trans. on Applied Superconductivity, 16(2), pp. 691-694, June 2006.
[16] W. H. Yang, “Application of Is-limiter for transmission systems,” Master Thesis, National Taipei University of Technology, Taiwan, 2007.
[17] J. H.Teng and C. N. Lu, “Optimum fault current limiter placement,” Proceedings of the IEEE PES International Conference on Intelligent System Applications to Power Systems, Kaohsiung, Taiwan,4-8, pp.1-6, Nov. 2007.
[18] H. H. Zeineldin and W.xiao, “Optimal fault current limiter sizing for distribution systems with DG, ” 2011 IEEE Power and Energy Society General Meeting, pp.1-5, 2011.
[19] T. Ghanbari and E. Farjah, “Development of an efficient solid-state fault current limiter for microgrid,” IEEE Trans. on Power Delivery, 27(4), pp.1829-1834, 2012.
65
[20] A. R. Fereidouni, B Vahidi, and T. H. Mehr, “The impact of solid state fault current limiter on power network with wind-turbine power generation,” IEEE Trans. on Smart Grid, 4(2), pp. 1188-1196, 2013.
[21] J. Lee and S. K. Joo, “Economic assessment method for superconducting fault current limiter (SFCL) in fault current constrained power system operation,” IEEE Trans. on Applied Superconductivity, 23(3), pp. 216-227, June 2013.
[22] C. H. Nguyen,“A study on applications of superconducting fault current limiter for voltage ouality enhancement in power systems,” PhD. Thesis, National Kaohsiung University of Applied Sciences, Taiwan, 2015.
[23] M. B. Subramani ,C. C. Chu, and L. Y. Lu et al, “Applications of solid-state fault current limiters for transient stability enhancement of wind power generation systems,” 2015 IEEE 2nd International Future Energy Electronics Conference, Taiwan, pp. 1-6, Nov.
2015.
[24] S. B. Naderi, M. Jafari, and M. T. Hagh, “Controllable resistive type fault current limiter (CR-FCL) with frequency and pulse duty-cycle,” Int. J. Electr. Power Energy Syst., 61(1), pp. 11-19, Oct. 2014.
[25] B. C. Sung, D. K. Park, and J. W. Park et al, “Study on a series resistive SFCL to improve power system transient stability: modeling, simulation, and experimental verification,” IEEE Trans. On Ind. Electron., 56(3) , pp. 2412-2419, July 2009.
[26] I. Ngamroo and T. Karaipoom, “Cooperative control SFCL and SMES for enhancing fault ride through capability and smoothing power fluctuation of DFIG wind farm,” IEEE Trans. on Applied Superconductivity, 24(1), pp. 5400304, Oct. 2014.
66
[27] Y. Kim, H. C. Jo, and S. K. Joo, “Analysis of impacts of superconducting fault current limiter (SFCL) placement on distributed Generation (DG) expansion,” IEEE Trans. on Applied Superconductivity, 26(4), pp.248-252, June 2016.
[28] L. Kovalsky, X. Yuan and X. Tekletsadik et al, “Applications of superconducting fault current limiters in electric power transmission systems,” IEEE Trans. on Applied Superconductivity, 15(2), pp.1317-1326, June 2005.
[29] K. D. Tekletsadik and C. L. Stanley, “Fault current limiter,” US patent, US20150055260A1, 2015.
[30] X. Pei, X. Zeng and A. C. Smith, “Resistive superconducting fault current limiter AC loss measurements and analysis,” IEEE Trans. on Applied Superconductivity, 26(4), pp.408-414, June 2016.
[31] H. Yamaguchi and T. Kataoka, “Effect of magnetic saturation on the current limiting characteristics of transformer type superconducting fault cerrent limiter,” IEEE Trans. on Applied Superconductivity,16(2), pp.691-694, June 2006.
[32] H. Schmitt, “Fault current limiters-report on the activities of CIGRE WG A3.16, ” IEEE Power Engineering Society General Meeting, pp. 1-6, 2006.
[33] R. K. Smith, P.G. Slade, and M. Sarkozi et al, “Solid-state distribution current limiter and circuit breaker application requirements and control strategies,” IEEE Trans. on Power Delivery, 8(3), pp.1155-1164, 1993.
[34] S. Sugimoto, Y .Kida, and H. Arita et al, “Principle and characteristics of a fault current limiter with series compensation,” IEEE Trans. on Power Delivery, 11(3), pp. 842- 847, 1996.
[35] G. G. Karady, “Principles of fault current limitation by a resonant LC circuit,” IEEE Proceedings-C, 139(1), pp.1-6,1992.
67
[36] Z. Wu, Z. Y. Lv and D. Z. Jiang, “Power electronic type short circuit fault current limiter,” CN patent, ZL 0022582, 2004.
[37] E. F. King, A. Y. Chikhani, and R. Hackam et al, “A microprocessor-controlled variable impedance adaptive fault current limiter,” IEEE Trans. on Power Delivery, (5)4, pp.
1830-1837, 1990.
[38] T. F. Godart, A. F. Imece, and J. C. McIver et al, “Feasibility of thyristor controlled series capacitor for distribution substation enhancements,” IEEE Trans. on Power Delivery, 10(1), pp. 203-209, 1995.
[39] T. Ghanbari, E. Farjah, and A. Zandnia, “Development of a high-performance bridge-type fault current limiter,” IET Generation Transmission&Distribution, 8(3), pp486-494, 2014
[40] J. Y. Chen and Z. Chen, “Fault current limiting by means of loss-less resistor,”
Proceedings of American Control Conference, pp. 544-548, 2000.
[41] D. Y. He, “The development outlook for four major power systemtechnologies FACTS, AEMS, DOA, and AIC and their correlations in the 21th century,” Power System Technology, 21(11), pp.16-22, 1997.
[42] H. J. Boenig, C. H. Mielke, and B. L. Burley et al, “A bridge-type fault current controller-a new FACTS controller,” IEEE Power Engineering Society Summer Meeting, pp. 455-460, 2002.
[43] G. Y. Lee, “A series-compensatot based fault current reduction technique,” Master Thesis, National Tsing Hua University, Taiwan, 2010.
[44] M. Noe and B. R. Oswald, “Technical and economical benefits of superconducting fault current limiters in power system, “ IEEE Trans. on Applied Superconductivity, 9(2), pp.
1347-1350, 1999.