參考文獻
1. 張智純，“PU 製品之發展與應用”，徐氏基金會，(1992) 2. Günter Oertel，“聚氨酯手冊”，中國石化出版社，(1985) 3. 許永綏，“塗料概論”，徐氏基金會，(1991) 12. Howarth, GA, ‘‘Polyurethanes, Polyurethane Dispersions and Polyureas:
Past, Present and Future.’’ Surf. Coat. Int., (2003)86 111
13. Sørensen, P.A., et al., Anticorrosive coatings: a review. Journal of Coatings Technology and Research, 2009. 6(2): p. 135-176.
14. Yanfang Zhu, Jinping Xiong, Yuming Tang, Yu Zuo, EIS study on
failure process of two polyurethane composite coatings, Progress in Organic Coatings,2010.69(1): p.7-11
15. Chih-Wei Peng, Chien-hua Hsu, Kun-Hsien Lin,Pei-Ling Li,Ming-Fa Hsieh,Yen Wei, Jui-Ming Yeh, Yuan-Hsiang Yu, Electrochemical corrosion protection studies of aniline-capped aniline trimer-based electroactive polyurethane coatings, Electrochimica Acta, 2011.58(30):
p.614-620
16. Nematollahi, M., et al., Comparison between the effect of nanoglass flake and montmorillonite organoclay on corrosion performance of epoxy coating. Corrosion Science, 2010. 52(5): p. 1809-1817.
17. Behzadnasab, M., et al., Corrosion performance of epoxy coatings
containing silane treated ZrO2 nanoparticles on mild steel in 3.5% NaCl solution. Corrosion Science, 2011. 53(1): p. 89-98.
18. DeBerry, D.W., Modification of the Electrochemical and Corrosion Behavior of Stainless Steels with an Electroactive Coating. J.
Electrochem. Soc., 1985. 132:p.1022.
19. Gas parac, R. and C.R. Martin, The Effect of Protic Doping Level on the Anticorrosion Characteristics of Polyaniline in Sulfuric Acid Solutions.
Journal of The Electrochemical Society, 2002. 149(9): p. B409.
20. Gas parac, R. and C.R. Martin, Investigations of the Mechanism of Corrosion Inhibition by Polyaniline. Polyaniline-Coated Stainless Steel in Sulfuric Acid Solution. Journal of The Electrochemical Society, 2001.
148(4): p. B138.
21. Dashtizadeh, A., et al., Acrylic coatings exhibiting improved hardness,
solvent resistance and glossiness by using silica nano-composites.
Applied Surface Science, 2011. 257(6): p. 2118-2125.
22. Sabzi, M., et al., Surface modification of TiO2 nano-particles with silane coupling agent and investigation of its effect on the properties of
polyurethane composite coating. Progress in Organic Coatings, 2009.
65(2): p. 222-228.
23. Radhakrishnan, S., et al., Conducting polyaniline–nano-TiO2
composites for smart corrosion resistant coatings. Electrochimica Acta, 2009. 54(4): p. 1249-1254.
24. Lape, N.K., E.E. Nuxoll, and E.L. Cussler, Polydisperse flakes in barrier films. Journal of Membrane Science, 2004. 236(1-2): p. 29-37.
25. M. Alexandre, P. Dubois Polymer-layered silicate nanocomposites:
preparation, properties, and uses of a new class of materials Mater. Sci.
Eng., 28 (2000), pp. 1–63
26. D.J. Chako, A.A. Leyva, Thermal transitions and barrier properties of olefinic nanocomposites Chem. Mater., 17 (2005), pp. 13–19
27. C.A. Hawkins, A.C.S., T.G. Wood, Recent advances in aqueous two-component systems for heavy-duty metal protection. Progress in Organic Coatings, 1997. 32: p. 253–261.
28. El-Shahawi, M. S.; Hamza, A.; Al-Sibaai, A. A.; Al-Saidi, H. M., Fast and selective removal of trace concentrations of bismuth (III) from water onto procaine hydrochloride loaded polyurethane foams sorbent:
Kinetics and thermodynamics of bismuth (III) study. Chemical Engineering Journal 2011, 173 (1), 29-35.
29. T. Sata, Ion Exchange Membranes: Preparation,
Characterization,Modification and Application Royal Society of Chemistry, Cambridge (2004)
30. W. Funke Prog. Org. Coat., 31 (1997), pp. 5–9
31. H.G.L. Coster, T.C. Chilcott, A.C.F. Coster Biochem. Bioenerg., 40 (1996), pp. 79–98
32. A. Yaroshchuk, L. Karpenko, V. Ribitsch J. Phys. Chem. B, 109 (2005), pp. 7834–7842
33. S. Bason, Y. Oren, V. Freger, in: Proc. Euromembrane 2004, Hamburg, Germany, 28 September–1 October, 2004.
34. Oertel,G., Polyurethane Handbook 2nd edition, Hanser Publishers, Munich Vienna New York(1972)
35. Malcolm P. Stevens, Polymer Chemical, New York: Oxford University Press, (1999), pp. 11–17
36. Kun-San Chen, T. Leon Yu, Yung-Sin Chen, Tsang-Lang Lin and.
Wen-Jiun Liu,Soft-and hard-segment phase segregation of
polyester-based polyurethane, Journal of polymer search 2001, 8, 99-109
37. Brown, R. A.; Coogan, R. G.; Fortier, D. G.; Reeve, M. S.; Rega, J. D., Comparing and contrasting the properties of urethane/acrylic hybrids with those of corresponding blends of urethane dispersions and acrylic emulsions. Progress in Organic Coatings 2005, 52 (1), 73-84.
38. Bin Yao, Gengchao Wang , Jiankun Ye, and Xingwei Li,Materials Letters,2008(62):p.1775–1778.
39. M.G. Hosseini, M. Sabouri ,and T. Shahrabi , Progress in Organic Coatings,2007(60):p.178-185.
40. Schweitzer, Philip A.,"paint and coatings applications and Corrosion Resistance",1thedition, Taylor & Francis Group (2006).
41. Yang, C.-H., et al., Hybrids of colloidal silica and waterborne
polyurethane. Journal of Colloid and Interface Science, 2006. 302(1): p.
123-132.
42. A.A. Prabu, M. Alagar,J. Macromol. Sci. Pure Appl. Chem., 42A (February (2)) (2005):p. 175–188
43. Jeon, H.T., et al., Synthesis and characterizations of waterborne
polyurethane–silica hybrids using sol–gel process. Colloids and Surfaces A: Physicochemical and Engineering Aspects, 2007. 302(1-3): p.
559-567.
44. Pathak, S.S., A. Sharma, and A.S. Khanna, Value addition to waterborne polyurethane resin by silicone modification for developing high
performance coating on aluminum alloy. Progress in Organic Coatings, 2009. 65(2): p. 206-216.
45. Mills, D.J., S.S. Jamali, and K. Paprocka, Investigation into the effect of nano-silica on the protective properties of polyurethane coatings.
Surface and Coatings Technology, 2012. 209: p. 137-142.
46. Zhang, J.T., et al., Studies of impedance models and water transport behaviors of polypropylene coated metals in NaCl solution. Progress in Organic Coatings, 2004. 49(4): p. 293-301.
47. Zheng, Z. T.; Zhang, H.; Wang, Y. H.; Zhang, Z. Acta
AeronautAstronaut Sin 2007, 28, 714.
48. González-García, Y., S. González, and R.M. Souto, Electrochemical and structural properties of a polyurethane coating on steel substrates for corrosion protection. Corrosion Science, 2007. 49(9): p. 3514-3526.
49. Armstrong, R. D.; Jenkins, A. T. A.; Johnson, B. W. Corros Sci1995, 37, 1615
50. Bonora, P. L; Deflorian, F.; Fedrizzi, L. Electrochim Acta 1996,41, 1073.
51. Fedrizzi, L.; Rodriguez, F. J.; Rossi, S.; Deflorian, F.; Di Maggio,R.
Electrochim Acta 2001, 46, 3715.
52. Zhang, S.; RenLiu; Jiang, J.; Yang, C.; Chen, M.; Liu, X., Facile
synthesis of waterborne UV-curable polyurethane/silica nanocomposites and morphology, physical properties of its nanostructured films.
Progress in Organic Coatings 2011,70 (1), 1-8.
53. James W. Rosthauser and Klaus Nachtkamp, “Waterbrone polyurethanes”,Coated Fabrics, vol. 16, 1986, pp. 39-57.
54. Noble, K.-L., Waterborne polyurethanes. Progress in Organic Coatings 32 1997 ,131–136.
55. R.E.Tirpak and P. H. Markusch, “Aqueous dispersions of crosslinked polyurethanes”, Water Brone Coatings,1986, pp. 13-17.
56. B. Vogt-Birnbrich, “Novel synthesis of low VOC polymeric dispersions and their application in waterborne coatings”, Prog. Org. Coatings, vol.
29, 1996, pp.31-38.
57. Rahman, M. M.; Kim, E.-Y.; Yun Kwon, J.; Yoo, H.-J.; Kim, H.-D.,
Cross-linking reaction of waterborne polyurethane adhesives containing different amount of ionic groups with hexamethoxymethyl melamine.
International Journal of Adhesion and Adhesives 2008, 28 (1-2), 47-54.
58. Werner J. Blank, V. J. T.; King Industries Inc., N., CT, USA, Properties of crosslinked polyurethane dispersions. Progress in Organic
Coatings .27 (1996) 1-15.
59. W.J. Blank, W. Hensley J. Paint Technol., 46 (593) (1974), pp. 46–50 60. A. Ribbe, O. Prucker, J.Ruhe, Polymer. Sci, 37(1996) 1087-1093 61. Shuxue Zhoua, L. W., Jian Sun, Weidian Shen, The change of the
properties of acrylic-based polyurethane. Progress in Organic Coatings 2002, 45, 33–42
62. M.B. Leverkusen, T.E. Koln, S.G. Leverkusen, et al., United States Patent 6 020 419 (2000).
63. J. Vega-Baudrit, V. Navarro-Banon, P. Vasquez, J.M. Martin-Martinez Addition of nanosilicas with different silanol content to thermoplastic polyurethane adhesives Int J Adhes Adhes, 26 (5) (2006), pp. 378–387 64. J. Vega-Baudrit, M. Sibaja-Ballestero, P. Vazquez, R. Torregrsa-Macia,
J.M. Martin-Martinez, Properties of thermoplastic polyurethane
adhesives containing nanosilicas with different specific surface area and silanol content Int J Adhes Adhes, 27 (6) (2007), pp. 469–479
65. Z.S. Petrović, I. Javni, A. Waddon, G. Banhegyi ,Structure and
properties of polyurethane–silica nanocomposites ,J Appl Polym Sci, 76 (2) (2000), pp.133–151
66. R.C.R. Nunes, J.L.C. Fonseca, M.R. Pereira Polymer–filler interactions
and mechanical properties of a polyurethane elastomer Polym Test, 9 (1) (2000), pp. 93–103
67. Chun Lei Wu, M. Q. Z., Min Zhi Rong, Klaus Friedrich, Tensile performance improvement of low nanoparticles filled-polypropylene composites. Composites Science and Technology ,62(2002), pp. 1327–
1340
68. Z.M. Dang, H.Y. Wang, H.P. Xu Appl. Phys. Lett., 89 (2006), pp.
112902 62. P.G. Pape, E.P. Plueddemann ,History of silane coupling agents in polymer composites ,R.B. Seymour, R.D. Deanin (Eds.),
History of Polymeric Composites, VSP, Utrecht, The Netherlands (1987), pp. 105–139
69. Zand, B.N. and M. Mahdavian, Corrosion and adhesion study of polyurethane coating on silane pretreated aluminum. Surface and Coatings Technology, 2009. 203(12), pp. 1677-1681.
70. J.L. Acosta, E. Morales, M.C. Ojeda and A. Linares, J. Mater. Sci. 21 (1986), pp. 725.
71. Yan, X. and G. Xu, Influence of silane coupling agent on
corrosion-resistant property in low infrared emissivity Cu/polyurethane coating. Progress in Organic Coatings, 2012. 73(2-3): p. 232-238.
72. F. Mansfeld, Corrosion 36 (1981), pp. 301.
73. D.D. Macdonald, Techniques for Characterization of Electrodes and Electrochemical Processes, John Wiley & Sons, Inc., New York, 1991, Ch.11.
74. Liu, X., et al., Study on corrosion electrochemical behavior of several
different coating systems by EIS. Progress in Organic Coatings, 2009.
64(4), pp . 497-503.
75. Jianguo, L., G. Gaoping, and Y. Chuanwei, EIS study of corrosion behaviour of organic coating/Dacromet composite systems.
Electrochimica Acta, 2005. 50(16-17) ,pp. 3320-3332.
76. Metroke, T.L., J.S. Gandhi, and A. Apblett, Corrosion resistance
properties of Ormosil coatings on 2024-T3 aluminum alloy. Progress in Organic Coatings, 2004. 50(4): p. 231-246.
77. A. Amirudin, D.T., Application of electrochemical impedance spectroscopy to study the degradation of polymer-coated metals.
Progress in Organic Coatings 26, 1995: p. 1-28.
78. Sanchez-Amaya, J.M., et al., Monitoring the degradation of a high solids epoxy coating by means of EIS and EN. Progress in Organic Coatings, 2007. 60(3): p. 248-254.
79. Arefinia, R., et al., Anticorrosion properties of smart coating based on polyaniline nanoparticles/epoxy-ester system. Progress in Organic Coatings, 2012. 75(4): p. 502-508.
80. Lin , Nguyen , E. Macknight , Progress in Organic Coating , Vol.20 , p169 , 1992
81. J. R. Scully , S. T. Hensley , Corrosion , p705 , 1994
82. S. Haruyama , M. Asari, T. Tsuru , the Electrochemical Society , p137 ,1989.
83. D. Kellner , ASTM, Pliadelphia , p374 , 1986.
84. H. Leidheiser , Corrosion , Vol.39 , p189 , 1983.
85. F. Mansfeld , S.Lin, C. Chen , H. Shin, Journal of Electrochemistry Society , Vol.35 , p906 , 1988.
86. R.D. Armstrong, A.T.A. Jenkins, B.W. Johnson Corros. Sci., 37 (1995), pp. 1521–1650
87. Irigoyen, M., et al., Effect of UV aging on electrochemical behavior of an anticorrosion paint. Progress in Organic Coatings, 2007. 59(3): p.
259-264.
88. Hu, J., et al., Ageing behavior of acrylic polyurethane varnish coating in artificial weathering environments. Progress in Organic Coatings, 2009.
65(4): p. 504-509.
89. Yang, L., Li, X., Cheng, X., Deng, H., Zhang, S., Lin, A., Diffusion behavior of water and chloride ion through acrylic polyurethane coating, J. Chin. Soc. Corros. Prot.,2006.26(1):p.6-10
90. Marchebois, H., et al., Electrochemical behavior of zinc-rich powder coatings in artificial sea water. Electrochimica Acta, 2004. 49(17-18): p.
2945-2954.
91. Chen JI, Chareonsak R, Puengpipat V, Marturunkakul S.
Organic/inorganic composite materials for coating applications. J Appl Polym Sci 1999;74:1341-1346.
92. Bierwagen, G., et al., EIS studies of coated metals in accelerated exposure. Progress in Organic Coatings, 2003. 46(2): p. 149-158.
93. 刘继慧，邵亚薇，孟国哲，张涛，王福会，“利用电化学阻抗谱和电 化学噪声分析薄有机涂层的腐蚀过程”，塗料工業，(2008)
94. 曹佳，邵亚薇，張濤，孟國哲，“磷酸鋅對環氧塗層破損處金屬的緩 蝕作用”中國腐蝕防治學報，(2009)