第六章 參考文獻
1.呂明生、王正和,“BGA 錫鉛球之製程介紹” , 工業材料 139 期, 1998, P.182 2.莊達人編著,”VLSI 製造技術” ,高立圖書有限公司, 1995.
3.李立中、陳允潔,”電子封裝專題 :『電子構裝』” ,材料與社會,第 34 期, 1989.
4. Seraphim, R.C.Lasky and C.Y.Li, “Principles of Electronic Packaging”, McGraw-Hill,1989, Inc.,pp. 2-4.
5. D.D.L.Chung, ”Material for Electronic Packaging”,Boston, Butterworth - Heinemann,1995, pp.3-4.
6. F.Guo, S.Choi, J.P.Lucas, and K.N. Subramanian, “Effects of reflow on wettability , microstructure and mechanical properties in lead-free solders”,Journal of electronic materials 29,2000,pp.1241-1248.
7. C.A.Harper, “Electronic Packaging and Interconnection Handbook”, McGraw-Hill,Inc.,1991, Chap.10,pp.20-22.
8. J.H.Lau, “Chip on Board Technologies for Multichip Modules”,VanNostrand Reinhold, New York, USA,1994, Chap.1, pp.1-2.
9. M.Abtew and G.Selvaduray, “Lead-Free Solders in Microelectronics”, MaterialsScience and Engineering R,Vol. 27, No. 5-6,2000, pp.95-141.
10.陳信文,陳立軒,林永森,陳志銘, “電子構裝技術與材料”,高立圖書有限公司, Chap.14,2004, pp.115-122.
11. C.E.Ho,W.T.Chen and C.R.Kao,“Interactions between Solder and Metallizationduring Long-Time Aging of Advanced Microelectronic Packages”,Journal of lectronic Materials, Vol.30,No.4,2001,pp. 379-385.
12. D. W. Henderson,T. Gosselin,A. Sarkhel,S. K. Kang,W. K. Choi,D.Y. Shih,C.
ternary eutectic Sn-Ag-Cu alloys” , J.Mater. Res. ,vol. 17,2002,pp. 2775-2778.
13. K. S. Kim, S. H. Huh, and K. Suganuma,“Effects of cooling speed on microstructure and tensile properties of Sn-Ag-Cu alloys” ,Mater Sci. and Eng,A333,2002,pp.
106-114.
14. J. H. Lau. , C. P. Wong, N.-C. Lee and S. W. R. Lee ,“Electronics manufacturing : with lead-free ,halogen-free and conductiveadhesive materials”,McGraw-Hill Companies , 2003 , chaper 13.
15. Z. G. Chen ,Y. W. Shi ,Z. D. Xia and Y. F. Yan ,“Study on the microstructure of a novel lead-free solder alloy SnAgCu-RE and its soldered joints” , J. Electron.Mater. , vol..31, 2002 , pp. 1122-1128.
16. Z. G. Chen , Y. W. Shi, Z. D. Xia and Y. F. Yan , “Properties of lead-free
solder SnAgCu containing minute amounts of rare earth” , J.Electron. Mater. , vol.32 , 2003 , pp. 235-243.
17. I. E. Anderson, J. C. Foley, B. A. Cook,J. Harringa,R. L. Terpstra and O. Unal,
“Alloying effects in near-eutectic Sn-Ag-Cu solder alloys for improved microstructural stability” ,J. Electron. Mater. ,vol. 30,2001, pp. 1050-1059.
18. I. E. Anderson, B. A. Cook, J. Harringa and R. L. Terpstra, “Microstructural modifications and properties of Sn-Ag-Cu solder joints induced by alloying” , J. Electron. Mater , vol. 31, 2002, pp.1166-1174.
19. I. E. Anderson,B. A. Cook,J. Harringa and R. L. Terpstra,“Sn-Ag-Cu solders and solder joints : Alloy development, microstructure, and properties” , JOM,June 2002,pp..26-29.
20. Y. Kariya, T. Hosoi, T. Kimura, S. Terashima, M. Tanaka,and T.Suga,
“Fatigue life enhancement of low silver content Sn-Ag-Cu flip-chip interconnects by Ni addition” ,Inter Society Conference on Thermal Phenomena,vol. 2,2004
pp. 103-108.
21. C. M. Chuang and K. L. Lin,“Effect of microelements addition on the interfacial reaction between Sn-Ag-Cu solders and the Cu substrate” ,J. Electron. Mater. , vol. 32,2003, pp. 1426-1431.
22. K. S. Kim, S. H. Huh and K. Suganuma,“Effects of fourth alloying additive on microstructures and tensile properties of Sn-Ag-Cu alloy and joints with Cu” , Microelectron. Reliab. vol. 43, 2003, pp. 259-267.
23. P. T. Vianco and D. R. Frear, ” Issues in the Replacement of Lead- Bearing Soldering” , JOM,Vol.45, No.7, 1993, pp.14-19.
24. H.H.Manko, “Solders and Soldering”, 2 nd Edn., McGraw-Hill, New York,Chap.3, 1979, pp.54-55.
25. J.S.Hwang, “Solder Paste in Electronics Packaging”, Van Nostrand Reinhold, New 59 York, Chap.4,1992, pp.70-71.
26.陳華懋, ”迴銲製程後熱處理對Sn-Ag-Cu-In-Zn無鉛銲錫接合強度之影響,中華大 學機械工程學系碩士論文,2010.
27.倫昇科技股份有限公司, “KOKI 中文無鉛資料＂,譯自KOKI Co.,Ltd.,日本,2003, in “http://www.ko-ki.co.jp/com_profile.htm”.
28.美國環保署EPA, “Sources of Indoor Air Pollution” , 2004 in “ http://www.epa.gov/iaq/lead.html ”.
29.張效銓, ”含微量鎳或鍺之錫銀銅錫球接點衝球試驗特性研究”,國立高雄 大學電機工程學系碩士論文, 2008.
30. B.Trumble , “Get the Lead out,IEEE Spectrum”,Vol.35,1998, pp.54-55.
31.鉛預防手冊參考網站http://www.iosh.gov.tw
32.黃家緯、林光隆, ”表面黏著技術42 期”,2003, pp.19-26.
Mount Technology, No.26,1997.7, pp.65-69.
34. K.N. Tu, and J.C.M. Li, “spontaneous whisker growth on lead-free solder finishes” ,Materials Chemistry and Physics, Vol.409, 2005,pp.131-139 .
35. N. Saunders and P. Miodwnik, ASM Hand book vol. 3 Alloy Phase Diagrams, edited by H. Baker, ASM International, Materials Park,Ohio 1992.
36. K. Suganuma, “Advances in Lead-free Electronics Soldering”,Current Opinion in Solid State and Materials Science, Vol. 5,No.1,2001,pp.55-64.
37. Anton Zoran Miric and Angela Grusd, "Lead-free Alloys," Soldering & Surface Mount Technology, Vol. 10, No. 1, 1998, pp. 19-25
38. F. Guo, J. P. Lucas and K. N. Subramanian, “Creep Behavior in Cu and
Ag Particle-Reinforced Composite and Eutectic Sn-3.5Ag and Sn-4.0Ag-0.5Cu Non-Composite Solder Joints”, Journal of Materials Science：Materials in Electronics,Vol. 12, No. 1, 2001,pp. 27-35.
39. M. McCormack, S. Jin, G. W. Kammlott and H. S. Chen, “New Pb-Free Solder Alloy with Superior Mechanical-Properties”, Applied Physics Letters, Vol. 63, No. 1, 1993,pp. 15-17.
40. L .Ye, Z. Liu and A. Tholen, “Recent Achievement in Microstructure Investigation of Sn-0.5Cu-3.4Ag Lead-Free Alloy by Adding Boron”,Advanced Packaging
Materials:Processes, Properties and Interfaces, Proceedings-International Symposium, Braselton, GA, USA,1999, pp. 262-267.
41. S. K. Kang, W. K. Choi, D. Y. Shih, D. W. Henderson and T.Gosselin,“Formation of Ag3Sn Plates in Sn-Ag-Cu Alloys and Optimization of their Alloy Composition”, Proceedings-Electronic Components and Technology Conference, New Orleans, LA, USA, 2003, pp. 64-70.
42. K. Zeng, V. Vuorinen and J. K. Kivilahti, “Intermetallic Reactions between
Lead-Free SnAgCu Solder and Ni(P) /Au Surface Finish on PWBs”, Proceedings-Electronic Components and Technology Conference,Orlando, FL, 2001, pp. 693-698.
43. I. E. Anderson, B. A. Cook, J. Harringa, R. L. Terpstra, J. C. Foley and O.Unal, “Effects of Alloying in Near-Eutectic Tin-Silver-Copper Solder Joints”, Materials Transactions (JIM), Vol. 43, No. 8,2002, pp. 1827-1832.
44. N. Saunders and A. P. Miodownik, Bulletin of Alloy Phase Diagrams,Vol.
11,1990, pp.278-287.
45. J. W. Morris Jr. and J. L. F. Goldstein,“Effect of Substrate on the Microstructure And 83 Creep of Eutectic In-Sn”, Metallurgical and Materials Transactions A：
Physical Metallurgy and Materials Science, Vol. 25, No.12, 1994, pp. 2715-2722.
46. M. S. Yeh, “Effects of Indium on the Mechanical Properties of Ternary Sn-In-Ag Solders”, Metallurgical and Materials Transactions A, Vol. 34A,No. 2, 2003, pp.361-365.
47. ASM Handbook, Vol. 3, Alloy Phase Diagrams, pp.25-383.
48. O. C. Cui, X. J. Liu, Y. Inohana, S. Ishihara，H. Ohtani, R. Kainuma, and K.
Ishida,Journal of Electronic Materials, Vol.29, No.10，2000, pp.1113-1121.
49. C.F. Chan, S.K. Lahiri, P.Yuan and J.B.H. How, ”An Itermetallic Study of solder joints with Sn-Ag-Cu Lead-Free Solder,”Electronics Packaging Technology Conference ,2000, pp.70-72.
50. A. Rahn, The Basics of Soldering, John Wiely & Sons, NewYork , 1993.
51. Q.S.M. Ilyas and B. Poborets, “Evaluation of Moisture Sensitivity of Surface Mount Plastic Packages”, Proceedings of the ASME Conference, 1993, pp.145-156.
52. C.E. Ho, Y.M. Chen, and C.R. Kao, “Reaction Kinetics of Solder-Ball with Pads in
No.11, 1999, pp1231-1237.
53. J.Y. Lee, J.H. Park, D.H. Shin, Y.H. Lee and Y.S. Kim, “Kinetics of Au-containing Ternary Intermetallic Redeposition at Solder/UBM Interface”, Journal of Electronic Materisls, Vol. 30, No. 9, 2001, pp.1138-1144.
54. M.R. Marks, ”Effect of Burn-in on Shear Strength of 63Sn-37Pb Solder Joints on an Au/Ni/Cu Substrate”, Journal of Electronic Materials, Vol.31, No.4, 2002,
pp.265-271.
55.W. K. Choi and H.M. Lee, “Effect of Ni Layer Thickness and Soldering Time on Intermetallic Compound Formation at the Interface between Molten Sn-3.5Ag and Ni/Cu Substrate,” Journal of Electronic Materials, Vol. 28, 1999, pp.1251-1255.
56. G. Leonida, Handbook of Printed Circuit Design,Manufacture,Components &
Assembly, Electrochemical Publications Limited, Ayr, Scotland, Chap. 5-6 ,1981.
57. Rudolf Strauss,“Surface Mount Technology”,Butterworth-Heinemann Ltd.1994 58.黃貴偉,”錫銦銀無鉛銲錫與銅及鎳基板之界面反應研究”國立台灣大學材料科學
與工程研究所碩士論文, 2001.
59. Donald P. Seraphim, Ronald C. Lasky, Che-Yu Li, “Principles of Electronic Packaging”, McGraw-Hill, 1993.
60. 賴永丞, ”Sn-Ag-Cu-In-Zn無鉛銲錫常溫和高溫機械性質”,中華大學機 械工程學系碩士論文, 2010.
61.Y. Kariya and M.Otsuka,” Mechanical Fatigue Characteristics of Sn-3.5Ag-X (X=Bi、
Cu、Zn and In) Solder Alloys,”Journal of Electronic Materials, Vol.27, No.11, 1998, pp.1229-1235.
62. Ed.T.Lyman, H.E.Bouer, W.J.Carnes, “Maters Handbook Vol.8 Metallography Structures and PhaseDigrams”, ASM Metals Park, Ohio,USA, pp.256.
63. S. Ito, A. Kitayama, H. Tabata, and H. Suzuki, “Development of Epoxy