加鋼纖維(基材)的活性粉混凝土有更佳抵抗水滲透能力。
13. 透過 SEM 微觀觀察，HA 材與 HC 材的微觀結構都很密實，HA 材之孔隙中 有較多CSH 膠體填充，且有單硫型鋁酸鈣水化物(AFm)存在，而添加爐石之 HC 材的孔隙則有較多鈣帆石(AFt)及 CSH 膠體。
參考文獻
1. 彭仁柏、潘煌鍟、戴毓修、蕭力銘、鄭郁潔，2010，爐石活性粉混凝土韌性 性質，第十屆結構工程研討會，桃園。
2. Millard, S.G., Molyneaux, T.C.K., Barnett, S.J., Gab, X., 2010, “Dynamic enhancement of blast-resistant ultra high performance fiber-reinforced concrete under flexural and shear loading”, International Journal of Impact Engineering, Vol. 37, pp.405-413.
3. Richard, P., Cheyrezy, M., 1995, “Composition Reactive Powder Concretes”, Cement and Concrete Research, Vol. 25, No. 7, pp.1501-1511.
4. 陳振川、詹穎雯、鄭瑞濱、陳彥睿、廖書麟，2006，超高強混凝土 RPC 之研 發、應用與展望，第八屆結構工程研討會，高雄。
5. Dugat, J., Roux, N., Bernier., 1996 “Mechanical Properties of Reactive Powder concretes”, Materials and Structures, Vol.29, pp.233-240.
6. Cheyrezy, M., Maret, V., Frouin, L., 1995, “Microstructural Analysis of Reactive Powder Concrete ”, Cement and Concrete Research, Vol. 25, No. 7, pp.1491-1500.
7. Chan, Y.W., Chu, S.H., 2004, “Effect of Silica Fume on Steel Fiber Bond Characteristics in Reactive Powder Concrete”, Cement and Concrete Research, Vol. 34, pp.1167-1172.
8. 何峰、黃政宇，2006，矽灰和石英粉對活性粉混凝土抗壓強度貢獻分析，混 凝土，第一九五期，第39-42 頁。
9. Zanni, H., Cheyrezy, M., Maret, V., Philippot, S., Nieto, P., 1996, “Investigation of Hydration and Pozzolanic Reaction in Reactive Powder Concrete (RPC) using 29Si NMR”, Cement and Concrete Research, Vol. 26, pp,93-100.
10. 詹穎雯、陳漢豪、楊泓斌，2006，活性粉混凝土表面緻密化技術與耐久性研 究，國科會計畫報告。
11. Aitcin, P. C., Lachemi, M., Adeline, R., and Richard, P., 1997, “ The Sherbooke Reactive Powder Concrete Footbridge”, ACI International Conference on High-performace Concrete, Kuala Lumpur, Malaysia.
12. 簡嘉男，2001，活性粉混凝土於剛性鋪面修補之應用研究，國立台灣大學，
碩士論文。
13. Lee, M.G., Wang, Y.C., Chiu, C.T., 2007, “A preliminary study of reactive powder as a new repair material”, Construction and Building Materials, Vol. 21, pp.182-189.
powder concrete”, Fuel, Vol.87, pp.2401-2407.
19. Halit, Y., Mert, Y.Y., Serdar, A., Anıl, S.K., 2009, “Mechanical properties of reactive powder concrete containing mineral admixtures under different curing regimes”, Construction and Building Materials, Vol.23, pp.1223-1231.
20. Halit, Y., Mert, Y.Y., Huseyin, Y., Serdar, A., Selcuk, T., 2010, “Mechanical properties of reactive powder concrete containing high volumes of ground granulated blast furnace slag”, Cement and Concrete Composites, Vol.32, pp.639-648.
27. Lindholm, U.S., 1971, “Techniques in Metals Research”, Interscience, New York, U.S.Vo.5, Part 1.
28. Kolsky, H., 1949, “An Investigation of the Mechanical Properties of Materials at Very High Rates of Loading”, Proc. Phy. Soc., B62, pp. 676-700.
29. Grote, D. L., Park, S. W. and Zhou, M., 2001, “Dynamic Behavior of Concrete at High Strain Rate and Pressure： .Experimental Characterization”, International Ⅰ Journal Impact Engineering, Vol. 25, pp.869-886.
30. Li, W., Xu, J., 2009, “Mechanical properties of basalt fiber reinforced geopolymeric concrete under impact loading”, Materials Science and Engineering, Vol. 505, pp.178-186.
31. Zhang, M., Wu, H.J., Li, Q.M., Huang, F.L., 2009, “Further investigation on the dynamic compressive strength enhancement of concrete-like materials based on split Hopkinson pressure bar tests. Part I: Experiments”, International Journal of
Impact Engineering, Vol. 36, pp.1327-1334.
32. Wang, Z.L., Liu, Y.S., Shen, R.F., 2008, “ Stress-strain relationship of steel fiber-reinforced concrete under dynamic compression”, Construction and Building Materials, Vol. 22, pp.811-819.
33. Tai, Y.S., 2009, “Uniaxial compression tests at various loading rates for reactive powder concrete”, Theoretical and Applied Fracture Mechanics, Vol. 52, pp,14-21.
34. Wang, Y., Wang, Z., Liang, X., An, M., 2008, “ Experimental and Numerical studies on dynamic compressive behavior of reactive powder concretes”, Acta Mechanica Solida Sinica, Vol. 21, NO. 5, pp.420-430.
35. Tai, Y.S., Sheu, T.S., 2007, “A study of the dynamic mechanics proper of reactive powder concrete by the use of the SHPB”, Journal of the Chinese Institute of Civil and Hydraulic Engineering, Vol. 19, No. 3, pp. 401-411.
36. Bernal, S., Gutierrez, R.D., Delvasto, S., Rodriguez, E., 2010, “Performance of an alkali-activated slag concrete reinforced with steel fibers”, Construction and Building Materials, Vol. 24, pp. 208-214.
37. Taylor, M., Lydon, F.D., Barr, B.I.G., 1997, “ Toughness Measurements on Steel Fiber-reinforced High Strength Concrete”, Cement and Concrete, Vol. 19, pp.329-340.
38. 易成、謝和平、孫飛，2003，鋼纖維混凝土疲勞斷裂性能與工程應用，科學 出版社，北京。
39. 宋珮瑄，1991，纖維混凝土實務 ，現代雜誌社，台北。
40. Jindal, R. L., 1984, “Shear and Moment Capacities of Steel Fiber Reinforced Concrete Beams”, Fiber Reinforced Concrete, ACI Publication, Vol. 81, pp. 1-16.
41. Higashiyama, H., Banthia, N., “Correlating Flexural and Shear Toughness of Lightweight Fiber-Reinforced Concrete”, ACI Materials Journal, Vol. 105-M29, pp. 251-257.
42. ACI 544. 2R-89, 2002, “Measurement of Properties of Fiber Reinforced Concrete”, ACI Manual of Concrete Practice Part6, American Concrete Institute.
43. ASTM C1018-97, 1997, “Standard Test Method for Flexural Toughness and First-Crack Strength of Fiber-Reinforced Concrete. ( Using Beam with Third-Point Loading)
44. CECS13:89，鋼纖維混凝土試驗方法，中国计划出版社，北京。
exposure to hign temperature” Construction and Building Materials, Vol. 24, pp.1967-1974.
50. Nataraja, M.C., Dhang, N., Gupta, A.P., 2000, “Toughness characterization of steel fiber-reinforced concrete by JSCE approach”, Cement and Concrete Research, Vol. 30, pp.593-597.
51. Banthia, N., Sappakittipakorn, M., 2007, “Toughness enhancement in steel fiber reinforced concrete through fiber hybridization”, Cement and Concrete Research, Vol. 37, pp. 1366-1372.
52. ASTM C1609, 2008, “Standard Test Method for Flexural Performance of Fiber-Reinforced Concrete (Using Beam With Third-Point Loading)
53. Marijan, S., Dubravka, B., 2009, “Toughness testing of ultra high performance fiber reinforced concrete”, Merials and Structures, Vol.42, pp. 1025-1038.
54. Higashiyama, H., Banthia, N., 2008, “Correlating Flexural and Shear Toughness of Lightweight Fiber-Reinforced Concrete”, ACI Materials Journal, Vol. 105-M29, pp.251-257.
55. Agarwal, B. D., 1981, Fracture Toughness of Short Fiber Composites in Modes Ⅱ and ”, Ⅲ Engineering Fracture Mechanics, Vol. 15, No.1-2, pp.219-230.
56. 宋珮瑄，1988，鋼纖維混凝土值及韌性指數之研究，土木水力季刊 14 卷第 4
62. Wong, R.C.K., Ma, S.K.Y., Wong, R.H.C., Chau, K.T., “Shear strength components of concrete under direct shearing”, Cement and Concrete Research, Vol. 37,pp.1248-1256.
63. Lindholm, U.S., 1964, “Some experiments with the split Hopkinson pressure bar”,
Journal of Mechanics of Physical and Solids, Vol. 12, pp. 317-335.
64. Shah, R.N., Theodorakopoulos, D.D., 1971, “Fiber Reinforced Concrete Properties”, Journal of the American Concrete Institute, Vol.68, No2, pp.126-135.
65. 謝孟翰，1998，超高強高性能混凝土之衝擊力學性質研究，國立台灣大學，
碩士論文。
66. Buenfeld, N.R., Newman, J.B., Page, C.L., 1986, “ The resistivity of mortar immersed in sea-water”, Cement and Concrete Research, Vol. 16, Part 1, pp.511~524.
67. 何育倫，2008，VAE 粉末對混凝土材料工程性質影響之研究，國立高雄應用 科技大學，碩士論文。
一、參加會議經過
本次參加的國際研討會名稱為：結構工程世界研討會(Structural Engineers World Congress -SEWC 2011)，日期為 2011 年 4 月 4-6 日，地點在義大利北部的科摩 (Como, Italy)舉行。此會
內容包括the technical and the theoretical aspects, including materials, actions, design, construction, research and tests等21個學術子題。
子計畫：活性粉混凝土防洪耐久及耐震性質研究(I)
(英文) Structural Engineers World Congress (SEWC 2011 Congress)
發表論文 題目
(中文)使用動態位移法判斷水泥系材料界面過渡區
(英文) Determination of interfacial transition zone in cementitious materials by dynamic displacement
界面過渡區範圍。
(4)藉由參與的過程，也了解主辦國家的民風與社會價值觀，除了學術上的交流外，也對當地的 文化有了更深一層的認識。因此，參與國際性會議不僅獲得學術上的新知，也可增加自己的國 際觀，對往後研究工作相信有相當的助益。
圖1
好奇心與想法，對於自身知識的累積以及國際觀的建立都有很大的助益，建議多鼓勵研究人員 赴國外發表論文。
五、攜回資料名稱及內容
論文集光碟片及出版論文集一冊。
六、其他--附件(如下頁) (1)研 討 會 DM
(2)研 討 會 議 程 (部 分 ) (3)發表論文一篇
Structural Engineers World Congress Villa Erba (Como Cernobbio)
Milano Italy
The themes
The aims of SEWC2011
The Structural Engineers World Congress [SEWC] is an international conference with worldwide participation by structural engineers. The founding associations are: ACI – ASCE – IASS – JSCA – NCSEA –SEAOC.
Important Dates
The abstracts should be sent until October 31st, 2010
The acceptance of the abstracts will be confirmed by the Scientific Committee before November 30th, 2010
計畫主持人：潘煌 計畫編號：99-2625-M-151-001-
成果項目 量化 名稱或內容性質簡述
測驗工具(含質性與量性) 0
課程/模組 0
電腦及網路系統或工具 0
教材 0
舉辦之活動/競賽 0
研討會/工作坊 0
電子報、網站 0
科 教 處 計 畫 加 填 項
目 計畫成果推廣之參與（閱聽）人數 0
請就研究內容與原計畫相符程度、達成預期目標情況、研究成果之學術或應用價
期刊: Applied Mechanics and Materials, Vol. 82, pp. 100-105, 2011.
題目：Static-Dynamic Properties of Reactive Powder Concrete with Blast Furnace Slag