【1】
Ng, K.T. and Gardner, L., “Buckling of Stainless Steel Columns and Beams in Fire,”Engineering Structures, Vol. 29, No. 3, pp. 717-730, 2006.
【2】
Uppfeldt, B., Outinen, A. T., Veljkovic, M., “A Design Model for Stainless Steel Box Columns in Fire,＂ Journal of Constructional Steel Research, Vol. 64, Issue 4, pp. 1294-1301, 2008.【3】
Wang, W.Y. and Li, G.Q., “Fire-resistance Study of Restrained Steel Columns With Partial Damage to Fire Protection,＂ Fire Safety Journal, Vol. 44, pp.1088-1094, 2009.
【4】
Leston-Jones LC, Lennon T, Plank RJ, Burgess IW. Elevated temperature moment-rotation tests on steelwork connections. Proc Inst Civ Engr Structs Bldgs 1997;122:410-9.【5】
Al-Jabri KS, Lennon T, Burgess IW, Plank RJ. Behaviour of steel and composite beam-column connections in fire. J Const Steel Res 1998;46(1-3) [Paper no. 180].【6】
Wang WY, Li GQ, Dong YL. Experimental study and spring-component modelling of extended end-plate joints in fire. J Const Steel Res 2007; 63(8): 1127-1137.【7】
Qian ZH, Tan KH, Burgess IW. Behavior of Steel Beam-to-Column Joints at Elevated Temperature: Experimental Investigation. J Struct Eng 2008; 134(5):713-726.
【8】
Yu H, Burgess IW, Davison JB, Plank RJ. Experimental investigation of the behaviour of fin plate connections in fire. J Const Steel Res 2008;doi:10.1016/j.jcsr.2008.02.015
【9】
Chung, H. Y., Lee, C. H., Su, W. J. and Lin, R. Z. (2010), “Application of Fire-Resistant Steel to Beam-to-Column Moment Connections at Elevated Temperatures,＂ Journal of Constructional Steel Reserach, 66, 289-303.【10】
Choe, L., Varma, A.H., Anil Agarwal and Surovek, A., “Fundamental Behavior of Steel Beam-Columns and Columns under Fire Loading: Experimental Evaluation,＂ Journal of Structural Engineering, Vol. 137, No. 9, pp. 954-966, (2011).【11】
Ding J, Wang YC. Experimental study of structural fire behaviour of steel beam110
Engineering Structures 2007;29(12):3485-3502.
【12】
“Behaviour of steel framed structures under fire conditions.＂ Main Report, DETR-PIT Project, School of Civil and Environmental Engineering, University of Edinburgh, 2000.【13】
O'Connor, M. A. and Martin D. M., “Behaviour of a Multi-Storey Steel Framed Building Subjected to Fire Attack,＂ Journal of Constructional Steel Research, 1998, 46:1-3, Paper No. 169.【14】
Varma, A., Agarwal, A., Hong, S. and Prasad, K., “Behavior of Steel Building Structures with Perimeter MRFs Under Fire Loading Effects,＂ Proceedings of the Fifth Ineternational Conference on Structures in Fire, 2008.【15】
陳柏均，「利用耐火鋼增進鋼構建築耐火能力之實例研究」，碩士論文，國立 成功大學土木工程學系，台南 （2010）。【16】
李祈安，「實尺寸箱型鋼柱高溫補強之數值模擬」，碩士論文，國立成功大學 土木工程學系，台南 （2010）。【17】
Smith, C.I., Kirby, B.R., Lapwood, D.G., Cole, K.J., Cunningham, A.P. and Preston, R.R., “The Reinstatement of Fire Damaged Steel Framed Structures,＂Fire Safety Journal, Vol. 4, Issue 1, pp. 21-62, (1981).
【18】
Qiang, X., Bijlaard, F.S.and Kolstein, H., “Post-fire mechanical properties of high strength structural steels S460 and S690,＂ Engineering Structures, Vol. 35, pp. 1-10, (2012).【23】
Hakuno, M., Shidawara, M. and Hara, T. (1969), “Dynamic destructive test of a cantilever beam controlled by an analog-computer＂, Transactions Japan Society of Civil Engineers, 171, 1-9. (In Japanese.)engineering study＂, 擬動態實驗研究講習會，台灣。
【25】
Nakashima M. (1992), “Extensions of hybrid structural testing＂, 擬動態實驗 研究講習會，台灣。【26】
Shinozuka M, Yun CB, Imai H. Identification of linear structural dynamic system.Journal of Engineering Mechanics (ASCE) 1982; 108:1371-1390.
【27】
Ghanem R, Gravin H, Shinozuka M. Experimental verification of a number of structural system identification algorithms, Technical Report NCEER-91-0024, National Center for Earthquake Engineering Research, Buffalo, NY, 1991.【28】
Johnson EA, Lam HF, Katafygiotis LS, Beck JL. Phase I IASC-ASCE structural health monitoring benchmark problem using simulated data. Journal of Engineering Mechanics (ASCE) 2004; 130(1):3-15.【29】
Bernal D, Beck J. Preface to the special issue on Phase I of the IASC-ASCE structural health monitoring benchmark. Journal of Engineering Mechanics (ASCE) 2004; 130(1):1-2.【30】
Bernal D, Gunes B. Flexibility based approach for damage characterization: a benchmark application. Journal of Engineering Mechanics (ASCE) 2004; 130(1), 61–70.【31】
Caicedo JM, Dkye SJ, Johnson EA. Natural excitation technique and eigensystem realization algorithm for Phase I of the IASC-ASCE benchmark problem: simulated data. Journal of Engineering Mechanics (ASCE) 2004;130(1):49-60.
【32】
Lus H, Betti R, Yu J, Angelis MD. Investigation of a system identification methodology in the context of the ASCE benchmark problem. Journal of Engineering Mechanics (ASCE) 2004; 130(1):71-84.【33】
S.Y. Chu and S.C. Lo, Application of the On-Line Recursive Least-Squares Method to Perform Structural Damage Assessment, Structural Control and Health Monitoring (2011) ; 18(3), 241-264.【34】
姚昭智、林其璋、洪李陵、朱世禹，「建築物在強震時之反應預估模式（Ⅱ）」，中央氣象局技術報告，編號MOTC-CWB-93-E-12，(2005)。
【35】
Y.Q. Ni and J.M. Ko (2006), “Structural Health Monitoring and Condition112
Health Monitoring and Damage Assessment, National Chung-Hsing University, pp.
V-1~V-18, Taichung, Taiwan, 14-15 December.
【36】
C.H. Loh, C.Y. Lin, and C.C. Huang (2000), “Time Domain Identification of Frames under Earthquake Loadings＂, Journal of Engineering Mechanics, ASCE, 126(7), pp.693-703.【37】
Loh, C. H., and Duh, J. Y. (1996). ｀｀Analysis of nonlinear system using NARMA models.＇＇ J. Struct. Engrg. and Earthquake Engrg., Tokyo, 13(1), pp.11–21.【38】
Loh, C. H., and Lin, H. M. (1996). ｀｀Application of off-line and on-line identification techniques to building seismic response data.＇＇ Earthquake Engrg.and Struct. Dyn., 25, pp. 269–290.
【39】
L.L. Hong and L.H Huang (2006), “Parametric Identification and Damage Evaluation of Buildings ＂ , International Workshop on Structural Health Monitoring and Damage Assessment, National Chung-Hsing University, pp.IX-1~IX-24, Taichung, Taiwan, 14-15 December.
【40】
Full-Scale Structural and Nonstructural Building System Performance during Earthquakes & Post-Earthquake Fire.http://nees.ucsd.edu/projects/2011-five-story/【41】
董毓利，「兩層兩跨組合鋼框架抗火性能的試驗研究」，建築鋼結構進展，第 Earthquake-Damaged Reinforced Concrete Frame,＂ Fire Safety Journal, Vol. 73, pp. 1-19, (2015)【44】
Eurocode-2, “Design of Concrete Structures-Part1.2: General Rules-Structural Fire Design,＂ ENV1992-1-2, (1995).【45】
Eurocode-3, “Design of Steel Structure-Part1.2:General Rules-Structural Fire Design,＂ ENV1993-1-2, (1995).【46】
Luecke, W. E., McCowan, C.N. and Banovic, S.W., “Mechanical Properties of Structural Steels,＂ Federal Building and Fire Safety Investigation of the World Trade Center Disaster, National institute of Standards and Technology, (2005).of the Inelastic Behavior of Steel Columns in Fire,＂ Journal of Temporal Design of Architecture and the Environment, Vol. 9, No. 1, pp. 85-88, (2009)
【48】
陳諺輝，「螺栓孔於高溫下承壓行為之量測與數值模擬」，碩士論文，國立成 功大學土木工程學系，台南 (2006)。【49】
林日增，「H型梁-箱型柱耐火彎矩接頭高溫行為之數值模擬」，碩士論文，國 立成功大學土木工程學系，台南（2008）。114
網 址 ： http://www.abri.gov.tw
編 者 ： 朱聖浩、朱世禹、施建泰
ISBN: 978-986-04-7002-4 (平裝)
在文檔中
複合性災害實驗用實尺寸鋼構屋結構行為研究
(頁 127-136)