• Deployment settings. In the event of a configuration script failure or time out, select whether to ignore all failures and proceed with the deployment. If you do not select this option, when the configuration scripts fail or time out, Launch Wizard will roll back the workload and delete all of the AWS resources created by Launch Wizard. Post-deployment configuration scripts must finish running in 2 hours or less.
• Configuration script. Choose to use a script located in Amazon S3 and enter the URL path of the script, or enter a script manually by uploading a script file. To remove the configuration script, choose Remove script.
4. After you have entered your deployment settings, choose Next.
(See the SAP software installation settings tab.) Distributed instance deployment
On the Configure SAP HANA deployment model page, enter the deployment details for a distributed instance deployment.
1. Deployment details. Launch Wizard supports single instance deployments, distributed instance deployments, and high availability deployments. Select Distributed instance deployment.
2. ABAP System Central Services (ASCS) Server and Primary Application Server (PAS). Enter the deployment settings for your instance.
• Instance details.
• Under Instance sizing, choose whether to use AWS/Marketplace/Community images or Bring your own images (BYOI).
• Operating System. Select a supported operating system version for the ASCS and PAS instances. For a complete list of operating system versions supported for ASCS, see Supported operating system versions for SAP deployments (p. 69).
• AMI ID. For BYOI, select the AMI that you want to use from the dropdown.
• Host name. Enter the host name for the EC2 instances.
• Auto Recovery. Auto recovery is an Amazon EC2 feature to increase instance availability.
Select the check box to enable EC2 automatic recovery for the instance. For more information, see Recover Your Instance in the Amazon EC2 User Guide.
• Under Instance sizing, choose whether to Use AWS recommended resources or Choose your instance.
• Use AWS recommended resources.
• Infrastructure requirements. Choose the requirements for your recommended resources from the dropdown list.
• Based on CPU/Memory. If you select this option, enter the required number of vCPU Cores and Memory. Amazon EC2supports up to 448 logical processors. If the amount of memory required exceeds 4TB, dedicated hosts are required.
• SAPS (SAP Application Performance Standard). If you select this option, enter the SAPS rating for the SAP certified instance types.
Deploy an application with Launch Wizard
• Instance type. Choose the instance type from the dropdown list.
• Recommended Resources. AWS Launch Wizard displays the Estimated monthly cost of operation based on your instance sizing selections. This is an estimate of AWS costs to deploy additional resources and does not include any applicable taxes or discounts.
3. Settings for Database (DB) Server. Enter the deployment settings for your instance.
• Instance details.
• Under Instance sizing, choose whether to use AWS/Marketplace/Community images or Bring your own images (BYOI).
• Operating System. Select a supported operating system version for the ASCS and PAS instances. For a complete list of operating system versions supported for ASCS, see Supported operating system versions for SAP deployments (p. 69).
• AMI ID. For BYOI, select the AMI that you want to use from the dropdown.
• Scale up and Scale out. Select an upgrade strategy for your system hardware to upgrade for increased data and workload.
• Scale-up deployment.If you choose this deployment upgrade model, enter the host name for the database
• Scale-out deployment. If you choose this deployment upgrade model, enter the SAP HANA master host name, the Number of worker nodes, and the Worker node hostname prefix under Instance sizing.
• Under Instance sizing, choose whether to Use AWS recommended resources or Choose instance.
• Use AWS recommended resources.
• Define requirements. Choose the requirements for your recommended resources from the dropdown list.
• Based on CPU/Memory. If you select this option, enter the required number of vCPU Cores and Memory. Amazon EC2supports up to 448 logical processors. If the amount of memory required exceeds 4TB, dedicated hosts are required.
• SAPS (SAP Application Performance Standard). If you select this option, enter the SAPS rating for the SAP certified instance types.
• Instance type. Choose the instance type from the dropdown list.
• Private IP address. Choose whether to use an Auto-assigned (default) IP address or a Custom IP address.
• Auto-assign (default). When you select this option, an IP addressed will be assigned for you. This is the default option.
• Private IP address. When you select this option, you can enter a single IP address. If you have selected multiple worker nodes, enter the IP addresses to assign to the instance for each selected node. Separate more than one IP address with commas. Verify that the IP addresses are within the subnet range of the instance you are launching. You must enter the same number of IP addresses as the number of nodes selected.
• Auto Recovery. Auto recovery is an Amazon EC2 feature to increase instance availability.
Select the check box to enable EC2 automatic recovery for the instance. For more information, see Recover Your Instance in the Amazon EC2 User Guide.
• Recommended Resources. AWS Launch Wizard displays the Estimated monthly cost of operation based on your instance sizing selections. This is an estimate of AWS costs to deploy additional resources and does not include any applicable taxes or discounts.
4. Settings for Additional App Servers (AAS) - optional. Enter the deployment settings for your AAS instances.
• Instance details.
• Number of Additional App Servers (AAS). Enter the number of additional application
Deploy an application with Launch Wizard
• Naming convention for host name. Enter the naming convention for the host name.
• Auto Recovery. Auto recovery is an Amazon EC2 feature to increase instance availability.
Select the check box to enable EC2 automatic recovery for the instance. For more information, see Recover Your Instance in the Amazon EC2 User Guide.
• Under Instance sizing, choose whether to Use AWS recommended resources or Choose your instance.
• Use AWS recommended resources.
• Define requirements. Choose the requirements for your recommended resources from the dropdown list.
• Based on CPU/Memory. If you select this option, enter the required number of vCPU Cores and Memory. Amazon EC2supports up to 448 logical processors. If the amount of memory required exceeds 4TB, dedicated hosts are required.
• SAPS (SAP Application Performance Standard). If you select this option, enter the SAPS rating for the SAP certified instance types.
• Choose your instance.
• Instance type. Choose the instance type from the dropdown list.
• Recommended Resources. AWS Launch Wizard displays the Estimated monthly cost of operation based on your instance sizing selections. This is an estimate of AWS costs to deploy additional resources and does not include any applicable taxes or discounts.
5. Pre- and post-deployment configuration scripts — optional
You can run pre- and post-deployment configuration scripts during application provisioning.
For more information about how Launch Wizard accesses and deploys these scripts, see Custom deployment configuration scripts (p. 81).
Pre-deployment configuration script — optional
• Deployment settings. In the event of a configuration script failure or time out, choose whether to proceed with the deployment. If you do not select this option, then when the configuration scripts fail or time out, Launch Wizard will roll back the workload and delete all of the AWS resources created by Launch Wizard. Pre-deployment configuration scripts must finish running in 45 minutes or less.
• Configuration script. You can add one or more configuration scripts depending on the number of servers you select to run scripts during the launch phase.
• For each pre-deployment configuration script that you want to run, choose to use a script located in Amazon S3 and enter the URL path of the script, or upload a script file.
• Select the servers to run the pre-deployment configuration scripts during the launch phase.
You can choose to run pre-deployment scripts on ABAP System Central Services (ASCS) Server and Primary Application Server (PAS), Database (DB) Server, and Additional App Servers (AAS). You can add a script for each server selected.
• To remove a configuration script, choose Remove script. To add more configuration scripts, choose Add another script.
Post-deployment configuration script — optional
• Deployment settings. In the event of a configuration script failure, choose whether to proceed with the deployment. If you do not select this option, then when the configuration scripts fail or time out, Launch Wizard will roll back the workload and delete all of the AWS resources created by Launch Wizard. Post-deployment configuration scripts must finish running in 2 hours or less.
• Configuration script. You can add one or more configuration scripts depending on the
Deploy an application with Launch Wizard
• For each post-deployment configuration script that you want to run, choose to use a script located in Amazon S3 and enter the URL path of the script, or upload a script file.
• Select the servers to run the post-deployment configuration scripts when an EC2 instance has been configured for use. You can choose to run the post-deployment scripts on ABAP System Central Services (ASCS) Server and Primary Application Server (PAS), Database (DB) Server, and Additional App Servers (AAS). You can add a script for each server selected.
• To remove a configuration script, choose Remove script. To add more configuration scripts, choose Add another script.
6. After you have entered your additional settings, choose Next.
(See the SAP software installation settings tab.) High availability deployment
On the Configure SAP HANA deployment model page, enter the deployment details for the high availability deployment.
1. Deployment details. Launch Wizard supports single instance deployments, distributed instance deployments, and high availability deployments. Select High availability deployment.
2. Settings for ABAP System Central Services (ASCS) server. Enter the deployment settings for your instance.
• Instance details.
• Under Image type, choose whether to use AWS/Marketplace/Community images or Bring your own images (BYOI).
• Operating System. Select a supported operating system version for the ASCS instances.
For a complete list of operating system versions supported for ASCS, see Supported operating system versions for SAP deployments (p. 69).
• AMI ID. For BYOI, select the AMI that you want to use from the dropdown list.
• Host name. Enter the host name for the EC2 instance.
• ASCS instance number. Enter the instance number for the SAP installation and setup, and to open up ports for security groups.
• Under Instance sizing, choose whether to Use AWS recommended resources or Choose your instance.
• Use AWS recommended resources.
• Based on CPU/Memory. If you select this option, enter the required number of vCPU Cores and Memory. Amazon EC2 supports up to 448 logical processors. If the amount of memory required exceeds 4 TB, dedicated hosts are required.
• SAPS (SAP Application Performance Standard). If you select this option, enter the SAPS rating for the SAP certified instance type.
• Choose your instance.
• Instance type. Choose the instance type from the dropdown list.
• Recommended Resources. AWS Launch Wizard displays the Estimated monthly cost of operation based on your instance sizing selections. This is an estimate of AWS costs to deploy additional resources. It does not include any applicable taxes or discounts.
3. Settings for Enqueue Replication Server (ERS). Enter the deployment settings for your ERS.
• Instance details.
• Under Instance sizing, choose whether to use AWS/Marketplace/Community images or Bring your own images (BYOI).
• Operating System. Select a supported operating system version for the ERS instance.
• AMI ID. For BYOI, select the AMI that you want to use from the dropdown list.
Deploy an application with Launch Wizard
• Host name. Enter the host name for the EC2 instance.
• ERS instance number. Enter the instance number for the SAP installation and setup, and to open up ports for security groups.
• Under Instance sizing, choose whether to Use AWS recommended resources or Choose your instance.
• Use AWS recommended resources.
• Based on CPU/Memory. If you select this option, enter the required number of vCPU Cores and Memory. Amazon EC2supports up to 448 logical processors. If the amount of memory required exceeds 4TB, dedicated hosts are required.
• SAPS (SAP Application Performance Standard). If you select this option, enter the SAPS rating for the SAP certified instance type.
• Choose your instance.
• Instance type. Choose the instance type from the dropdown list.
• Recommended Resources. AWS Launch Wizard displays the Estimated monthly cost of operation based on your instance sizing selections. This is an estimate of AWS costs to deploy additional resources and does not include any applicable taxes or discounts.
4. Settings for database (DB) Server. Enter the deployment settings for your database.
• Under Instance sizing, choose whether to use AWS/Marketplace/Community images or Bring your own images (BYOI).
• Instance details.
• Operating System. Select a supported operating system version for the ERS instance.
• AMI ID. For BYOI, select the AMI that you want to use from the dropdown list.
• Primary and secondary instance details. Enter details for both the primary and secondary instances.
• SAP HANA host name. Enter the host name for the SAP HANA primary and secondary instances.
• Server site name. Enter the primary and secondary site name for the SAP HANA system replication.