StopEntitiesDetectionV2Job
Stops a medical entities detection job in progress.
Request Syntax
{
"JobId": "string"
}
Request Parameters
For information about the parameters that are common to all actions, see Common Parameters (p. 112).
The request accepts the following data in JSON format.
JobId (p. 69)
The identifier of the medical entities job to stop.
Type: String
Length Constraints: Minimum length of 1. Maximum length of 32.
Pattern: ^([\p{L}\p{Z}\p{N}_.:/=+\-%@]*)$
Required: Yes
Response Syntax
{ "JobId": "string"
}
Response Elements
If the action is successful, the service sends back an HTTP 200 response.
The following data is returned in JSON format by the service.
JobId (p. 69)
The identifier of the medical entities detection job that was stopped.
Type: String
Length Constraints: Minimum length of 1. Maximum length of 32.
Pattern: ^([\p{L}\p{Z}\p{N}_.:/=+\-%@]*)$
Errors
For information about the errors that are common to all actions, see Common Errors (p. 114).
See Also
InternalServerException
An internal server error occurred. Retry your request.
HTTP Status Code: 500 InvalidRequestException
The request that you made is invalid. Check your request to determine why it's invalid and then retry the request.
HTTP Status Code: 400 ResourceNotFoundException
The resource identified by the specified Amazon Resource Name (ARN) was not found. Check the ARN and try your request again.
HTTP Status Code: 400
See Also
For more information about using this API in one of the language-specific AWS SDKs, see the following:
• AWS Command Line Interface
• AWS SDK for .NET
• AWS SDK for C++
• AWS SDK for Go
• AWS SDK for Java V2
• AWS SDK for JavaScript
• AWS SDK for PHP V3
• AWS SDK for Python
• AWS SDK for Ruby V3
StopICD10CMInferenceJob
StopICD10CMInferenceJob
Stops an InferICD10CM inference job in progress.
Request Syntax
{ "JobId": "string"
}
Request Parameters
For information about the parameters that are common to all actions, see Common Parameters (p. 112).
The request accepts the following data in JSON format.
JobId (p. 71)
The identifier of the job.
Type: String
Length Constraints: Minimum length of 1. Maximum length of 32.
Pattern: ^([\p{L}\p{Z}\p{N}_.:/=+\-%@]*)$
Required: Yes
Response Syntax
{ "JobId": "string"
}
Response Elements
If the action is successful, the service sends back an HTTP 200 response.
The following data is returned in JSON format by the service.
JobId (p. 71)
The identifier generated for the job. To get the status of job, use this identifier with the DescribeICD10CMInferenceJob operation.
Type: String
Length Constraints: Minimum length of 1. Maximum length of 32.
Pattern: ^([\p{L}\p{Z}\p{N}_.:/=+\-%@]*)$
Errors
For information about the errors that are common to all actions, see Common Errors (p. 114).
See Also
InternalServerException
An internal server error occurred. Retry your request.
HTTP Status Code: 500 InvalidRequestException
The request that you made is invalid. Check your request to determine why it's invalid and then retry the request.
HTTP Status Code: 400 ResourceNotFoundException
The resource identified by the specified Amazon Resource Name (ARN) was not found. Check the ARN and try your request again.
HTTP Status Code: 400
See Also
For more information about using this API in one of the language-specific AWS SDKs, see the following:
• AWS Command Line Interface
• AWS SDK for .NET
• AWS SDK for C++
• AWS SDK for Go
• AWS SDK for Java V2
• AWS SDK for JavaScript
• AWS SDK for PHP V3
• AWS SDK for Python
• AWS SDK for Ruby V3
StopPHIDetectionJob
StopPHIDetectionJob
Stops a protected health information (PHI) detection job in progress.
Request Syntax
{
"JobId": "string"
}
Request Parameters
For information about the parameters that are common to all actions, see Common Parameters (p. 112).
The request accepts the following data in JSON format.
JobId (p. 73)
The identifier of the PHI detection job to stop.
Type: String
Length Constraints: Minimum length of 1. Maximum length of 32.
Pattern: ^([\p{L}\p{Z}\p{N}_.:/=+\-%@]*)$
Required: Yes
Response Syntax
{ "JobId": "string"
}
Response Elements
If the action is successful, the service sends back an HTTP 200 response.
The following data is returned in JSON format by the service.
JobId (p. 73)
The identifier of the PHI detection job that was stopped.
Type: String
Length Constraints: Minimum length of 1. Maximum length of 32.
Pattern: ^([\p{L}\p{Z}\p{N}_.:/=+\-%@]*)$
Errors
For information about the errors that are common to all actions, see Common Errors (p. 114).
See Also
InternalServerException
An internal server error occurred. Retry your request.
HTTP Status Code: 500 InvalidRequestException
The request that you made is invalid. Check your request to determine why it's invalid and then retry the request.
HTTP Status Code: 400 ResourceNotFoundException
The resource identified by the specified Amazon Resource Name (ARN) was not found. Check the ARN and try your request again.
HTTP Status Code: 400
See Also
For more information about using this API in one of the language-specific AWS SDKs, see the following:
• AWS Command Line Interface
• AWS SDK for .NET
• AWS SDK for C++
• AWS SDK for Go
• AWS SDK for Java V2
• AWS SDK for JavaScript
• AWS SDK for PHP V3
• AWS SDK for Python
• AWS SDK for Ruby V3
StopRxNormInferenceJob
StopRxNormInferenceJob
Stops an InferRxNorm inference job in progress.
Request Syntax
{ "JobId": "string"
}
Request Parameters
For information about the parameters that are common to all actions, see Common Parameters (p. 112).
The request accepts the following data in JSON format.
JobId (p. 75)
The identifier of the job.
Type: String
Length Constraints: Minimum length of 1. Maximum length of 32.
Pattern: ^([\p{L}\p{Z}\p{N}_.:/=+\-%@]*)$
Required: Yes
Response Syntax
{ "JobId": "string"
}
Response Elements
If the action is successful, the service sends back an HTTP 200 response.
The following data is returned in JSON format by the service.
JobId (p. 75)
The identifier generated for the job. To get the status of job, use this identifier with the DescribeRxNormInferenceJob operation.
Type: String
Length Constraints: Minimum length of 1. Maximum length of 32.
Pattern: ^([\p{L}\p{Z}\p{N}_.:/=+\-%@]*)$
Errors
For information about the errors that are common to all actions, see Common Errors (p. 114).
See Also
InternalServerException
An internal server error occurred. Retry your request.
HTTP Status Code: 500 InvalidRequestException
The request that you made is invalid. Check your request to determine why it's invalid and then retry the request.
HTTP Status Code: 400 ResourceNotFoundException
The resource identified by the specified Amazon Resource Name (ARN) was not found. Check the ARN and try your request again.
HTTP Status Code: 400
See Also
For more information about using this API in one of the language-specific AWS SDKs, see the following:
• AWS Command Line Interface
• AWS SDK for .NET
• AWS SDK for C++
• AWS SDK for Go
• AWS SDK for Java V2
• AWS SDK for JavaScript
• AWS SDK for PHP V3
• AWS SDK for Python
• AWS SDK for Ruby V3
StopSNOMEDCTInferenceJob
StopSNOMEDCTInferenceJob
Stops an InferSNOMEDCT inference job in progress.
Request Syntax
{ "JobId": "string"
}
Request Parameters
For information about the parameters that are common to all actions, see Common Parameters (p. 112).
The request accepts the following data in JSON format.
JobId (p. 77)
The job id of the asynchronous InferSNOMEDCT job to be stopped.
Type: String
Length Constraints: Minimum length of 1. Maximum length of 32.
Pattern: ^([\p{L}\p{Z}\p{N}_.:/=+\-%@]*)$
Required: Yes
Response Syntax
{ "JobId": "string"
}
Response Elements
If the action is successful, the service sends back an HTTP 200 response.
The following data is returned in JSON format by the service.
JobId (p. 77)
The identifier generated for the job. To get the status of job, use this identifier with the DescribeSNOMEDCTInferenceJob operation.
Type: String
Length Constraints: Minimum length of 1. Maximum length of 32.
Pattern: ^([\p{L}\p{Z}\p{N}_.:/=+\-%@]*)$
Errors
For information about the errors that are common to all actions, see Common Errors (p. 114).
See Also
InternalServerException
An internal server error occurred. Retry your request.
HTTP Status Code: 500 InvalidRequestException
The request that you made is invalid. Check your request to determine why it's invalid and then retry the request.
HTTP Status Code: 400 ResourceNotFoundException
The resource identified by the specified Amazon Resource Name (ARN) was not found. Check the ARN and try your request again.
HTTP Status Code: 400 TooManyRequestsException
You have made too many requests within a short period of time. Wait for a short time and then try your request again. Contact customer support for more information about a service limit increase.
HTTP Status Code: 400
See Also
For more information about using this API in one of the language-specific AWS SDKs, see the following:
• AWS Command Line Interface
• AWS SDK for .NET
• AWS SDK for C++
• AWS SDK for Go
• AWS SDK for Java V2
• AWS SDK for JavaScript
• AWS SDK for PHP V3
• AWS SDK for Python
• AWS SDK for Ruby V3