Service Quotas
API Reference
API Version 2019-06-24
Service Quotas: API Reference
Copyright © Amazon Web Services, Inc. and/or its affiliates. All rights reserved.
Amazon's trademarks and trade dress may not be used in connection with any product or service that is not Amazon's, in any manner that is likely to cause confusion among customers, or in any manner that disparages or discredits Amazon. All other trademarks not owned by Amazon are the property of their respective owners, who may or may not be affiliated with, connected to, or sponsored by Amazon.
Table of Contents
Welcome ... 1
Actions ... 2
AssociateServiceQuotaTemplate ... 3
Response Elements ... 3
Errors ... 3
See Also ... 4
DeleteServiceQuotaIncreaseRequestFromTemplate ... 5
Request Syntax ... 5
Request Parameters ... 5
Response Elements ... 5
Errors ... 6
See Also ... 6
DisassociateServiceQuotaTemplate ... 8
Response Elements ... 8
Errors ... 8
See Also ... 9
GetAssociationForServiceQuotaTemplate ... 10
Response Syntax ... 10
Response Elements ... 10
Errors ... 10
See Also ... 11
GetAWSDefaultServiceQuota ... 12
Request Syntax ... 12
Request Parameters ... 12
Response Syntax ... 12
Response Elements ... 13
Errors ... 13
See Also ... 14
GetRequestedServiceQuotaChange ... 15
Request Syntax ... 15
Request Parameters ... 15
Response Syntax ... 15
Response Elements ... 15
Errors ... 16
See Also ... 16
GetServiceQuota ... 17
Request Syntax ... 17
Request Parameters ... 17
Response Syntax ... 17
Response Elements ... 18
Errors ... 18
See Also ... 19
GetServiceQuotaIncreaseRequestFromTemplate ... 20
Request Syntax ... 20
Request Parameters ... 20
Response Syntax ... 21
Response Elements ... 21
Errors ... 21
See Also ... 22
ListAWSDefaultServiceQuotas ... 23
Request Syntax ... 23
Request Parameters ... 23
Response Syntax ... 24
Response Elements ... 24
Errors ... 25
See Also ... 25
ListRequestedServiceQuotaChangeHistory ... 26
Request Syntax ... 26
Request Parameters ... 26
Response Syntax ... 27
Response Elements ... 27
Errors ... 27
See Also ... 28
ListRequestedServiceQuotaChangeHistoryByQuota ... 29
Request Syntax ... 29
Request Parameters ... 29
Response Syntax ... 30
Response Elements ... 30
Errors ... 31
See Also ... 31
ListServiceQuotaIncreaseRequestsInTemplate ... 32
Request Syntax ... 32
Request Parameters ... 32
Response Syntax ... 33
Response Elements ... 33
Errors ... 33
See Also ... 34
ListServiceQuotas ... 35
Request Syntax ... 35
Request Parameters ... 35
Response Syntax ... 36
Response Elements ... 36
Errors ... 37
See Also ... 37
ListServices ... 38
Request Syntax ... 38
Request Parameters ... 38
Response Syntax ... 38
Response Elements ... 39
Errors ... 39
See Also ... 40
ListTagsForResource ... 41
Request Syntax ... 41
Request Parameters ... 41
Response Syntax ... 41
Response Elements ... 41
Errors ... 42
See Also ... 42
PutServiceQuotaIncreaseRequestIntoTemplate ... 43
Request Syntax ... 43
Request Parameters ... 43
Response Syntax ... 44
Response Elements ... 44
Errors ... 44
See Also ... 45
RequestServiceQuotaIncrease ... 46
Request Syntax ... 46
Request Parameters ... 46
Response Syntax ... 47
Response Elements ... 47
Errors ... 47
See Also ... 48
TagResource ... 49
Request Syntax ... 49
Request Parameters ... 49
Response Elements ... 49
Errors ... 49
See Also ... 50
UntagResource ... 51
Request Syntax ... 51
Request Parameters ... 51
Response Elements ... 51
Errors ... 51
See Also ... 52
Data Types ... 53
ErrorReason ... 54
Contents ... 54
See Also ... 54
MetricInfo ... 55
Contents ... 55
See Also ... 55
QuotaPeriod ... 56
Contents ... 56
See Also ... 56
RequestedServiceQuotaChange ... 57
Contents ... 57
See Also ... 59
ServiceInfo ... 60
Contents ... 60
See Also ... 60
ServiceQuota ... 61
Contents ... 61
See Also ... 62
ServiceQuotaIncreaseRequestInTemplate ... 63
Contents ... 63
See Also ... 64
Tag ... 65
Contents ... 65
See Also ... 65
Common Parameters ... 66
Common Errors ... 68
Welcome
With Service Quotas, you can view and manage your quotas easily as your AWS workloads grow. Quotas, also referred to as limits, are the maximum number of resources that you can create in your AWS account. For more information, see the Service Quotas User Guide.
This document was last published on March 6, 2022.
Actions
The following actions are supported:
• AssociateServiceQuotaTemplate (p. 3)
• DeleteServiceQuotaIncreaseRequestFromTemplate (p. 5)
• DisassociateServiceQuotaTemplate (p. 8)
• GetAssociationForServiceQuotaTemplate (p. 10)
• GetAWSDefaultServiceQuota (p. 12)
• GetRequestedServiceQuotaChange (p. 15)
• GetServiceQuota (p. 17)
• GetServiceQuotaIncreaseRequestFromTemplate (p. 20)
• ListAWSDefaultServiceQuotas (p. 23)
• ListRequestedServiceQuotaChangeHistory (p. 26)
• ListRequestedServiceQuotaChangeHistoryByQuota (p. 29)
• ListServiceQuotaIncreaseRequestsInTemplate (p. 32)
• ListServiceQuotas (p. 35)
• ListServices (p. 38)
• ListTagsForResource (p. 41)
• PutServiceQuotaIncreaseRequestIntoTemplate (p. 43)
• RequestServiceQuotaIncrease (p. 46)
• TagResource (p. 49)
• UntagResource (p. 51)
AssociateServiceQuotaTemplate
AssociateServiceQuotaTemplate
Associates your quota request template with your organization. When a new account is created in your organization, the quota increase requests in the template are automatically applied to the account. You can add a quota increase request for any adjustable quota to your template.
Related Actions
• DisassociateServiceQuotaTemplate (p. 8)
• GetAssociationForServiceQuotaTemplate (p. 10)
• PutServiceQuotaIncreaseRequestIntoTemplate (p. 43)
Response Elements
If the action is successful, the service sends back an HTTP 200 response with an empty HTTP body.
Errors
For information about the errors that are common to all actions, see Common Errors (p. 68).
AccessDeniedException
You do not have sufficient permission to perform this action.
HTTP Status Code: 400
AWSServiceAccessNotEnabledException
The action you attempted is not allowed unless Service Access with Service Quotas is enabled in your organization.
HTTP Status Code: 400
DependencyAccessDeniedException
You can't perform this action because a dependency does not have access.
HTTP Status Code: 400
NoAvailableOrganizationException
The account making this call is not a member of an organization.
HTTP Status Code: 400
OrganizationNotInAllFeaturesModeException
The organization that your account belongs to is not in All Features mode.
HTTP Status Code: 400 ServiceException
Something went wrong.
HTTP Status Code: 500
TemplatesNotAvailableInRegionException
The Service Quotas template is not available in this AWS Region.
See Also
HTTP Status Code: 400 TooManyRequestsException
Due to throttling, the request was denied. Slow down the rate of request calls, or request an increase for this quota.
HTTP Status Code: 400
See Also
For more information about using this API in one of the language-specific AWS SDKs, see the following:
• AWS Command Line Interface
• AWS SDK for .NET
• AWS SDK for C++
• AWS SDK for Go
• AWS SDK for Java V2
• AWS SDK for JavaScript
• AWS SDK for PHP V3
• AWS SDK for Python
• AWS SDK for Ruby V3
DeleteServiceQuotaIncreaseRequestFromTemplate
DeleteServiceQuotaIncreaseRequestFromTemplate
Deletes the quota increase request for the specified quota from your quota request template.
Request Syntax
{
"AwsRegion": "string", "QuotaCode": "string", "ServiceCode": "string"
}
Request Parameters
For information about the parameters that are common to all actions, see Common Parameters (p. 66).
The request accepts the following data in JSON format.
AwsRegion (p. 5) The AWS Region.
Type: String
Length Constraints: Minimum length of 1. Maximum length of 64.
Pattern: [a-zA-Z][a-zA-Z0-9-]{1,128}
Required: Yes QuotaCode (p. 5)
The quota identifier.
Type: String
Length Constraints: Minimum length of 1. Maximum length of 128.
Pattern: [a-zA-Z][a-zA-Z0-9-]{1,128}
Required: Yes ServiceCode (p. 5)
The service identifier.
Type: String
Length Constraints: Minimum length of 1. Maximum length of 63.
Pattern: [a-zA-Z][a-zA-Z0-9-]{1,63}
Required: Yes
Response Elements
If the action is successful, the service sends back an HTTP 200 response with an empty HTTP body.
Errors
Errors
For information about the errors that are common to all actions, see Common Errors (p. 68).
AccessDeniedException
You do not have sufficient permission to perform this action.
HTTP Status Code: 400
AWSServiceAccessNotEnabledException
The action you attempted is not allowed unless Service Access with Service Quotas is enabled in your organization.
HTTP Status Code: 400
DependencyAccessDeniedException
You can't perform this action because a dependency does not have access.
HTTP Status Code: 400 IllegalArgumentException
Invalid input was provided.
HTTP Status Code: 400
NoAvailableOrganizationException
The account making this call is not a member of an organization.
HTTP Status Code: 400 NoSuchResourceException
The specified resource does not exist.
HTTP Status Code: 400 ServiceException
Something went wrong.
HTTP Status Code: 500
TemplatesNotAvailableInRegionException
The Service Quotas template is not available in this AWS Region.
HTTP Status Code: 400 TooManyRequestsException
Due to throttling, the request was denied. Slow down the rate of request calls, or request an increase for this quota.
HTTP Status Code: 400
See Also
For more information about using this API in one of the language-specific AWS SDKs, see the following:
• AWS Command Line Interface
See Also
• AWS SDK for .NET
• AWS SDK for C++
• AWS SDK for Go
• AWS SDK for Java V2
• AWS SDK for JavaScript
• AWS SDK for PHP V3
• AWS SDK for Python
• AWS SDK for Ruby V3
DisassociateServiceQuotaTemplate
DisassociateServiceQuotaTemplate
Disables your quota request template. After a template is disabled, the quota increase requests in the template are not applied to new accounts in your organization. Disabling a quota request template does not apply its quota increase requests.
Response Elements
If the action is successful, the service sends back an HTTP 200 response with an empty HTTP body.
Errors
For information about the errors that are common to all actions, see Common Errors (p. 68).
AccessDeniedException
You do not have sufficient permission to perform this action.
HTTP Status Code: 400
AWSServiceAccessNotEnabledException
The action you attempted is not allowed unless Service Access with Service Quotas is enabled in your organization.
HTTP Status Code: 400
DependencyAccessDeniedException
You can't perform this action because a dependency does not have access.
HTTP Status Code: 400
NoAvailableOrganizationException
The account making this call is not a member of an organization.
HTTP Status Code: 400 ServiceException
Something went wrong.
HTTP Status Code: 500
ServiceQuotaTemplateNotInUseException
The quota request template is not associated with your organization.
HTTP Status Code: 400
TemplatesNotAvailableInRegionException
The Service Quotas template is not available in this AWS Region.
HTTP Status Code: 400 TooManyRequestsException
Due to throttling, the request was denied. Slow down the rate of request calls, or request an increase for this quota.
HTTP Status Code: 400
See Also
See Also
For more information about using this API in one of the language-specific AWS SDKs, see the following:
• AWS Command Line Interface
• AWS SDK for .NET
• AWS SDK for C++
• AWS SDK for Go
• AWS SDK for Java V2
• AWS SDK for JavaScript
• AWS SDK for PHP V3
• AWS SDK for Python
• AWS SDK for Ruby V3
GetAssociationForServiceQuotaTemplate
GetAssociationForServiceQuotaTemplate
Retrieves the status of the association for the quota request template.
Response Syntax
{
"ServiceQuotaTemplateAssociationStatus": "string"
}
Response Elements
If the action is successful, the service sends back an HTTP 200 response.
The following data is returned in JSON format by the service.
ServiceQuotaTemplateAssociationStatus (p. 10)
The association status. If the status is ASSOCIATED, the quota increase requests in the template are automatically applied to new accounts in your organization.
Type: String
Valid Values: ASSOCIATED | DISASSOCIATED
Errors
For information about the errors that are common to all actions, see Common Errors (p. 68).
AccessDeniedException
You do not have sufficient permission to perform this action.
HTTP Status Code: 400
AWSServiceAccessNotEnabledException
The action you attempted is not allowed unless Service Access with Service Quotas is enabled in your organization.
HTTP Status Code: 400
DependencyAccessDeniedException
You can't perform this action because a dependency does not have access.
HTTP Status Code: 400
NoAvailableOrganizationException
The account making this call is not a member of an organization.
HTTP Status Code: 400 ServiceException
Something went wrong.
HTTP Status Code: 500
See Also
ServiceQuotaTemplateNotInUseException
The quota request template is not associated with your organization.
HTTP Status Code: 400
TemplatesNotAvailableInRegionException
The Service Quotas template is not available in this AWS Region.
HTTP Status Code: 400 TooManyRequestsException
Due to throttling, the request was denied. Slow down the rate of request calls, or request an increase for this quota.
HTTP Status Code: 400
See Also
For more information about using this API in one of the language-specific AWS SDKs, see the following:
• AWS Command Line Interface
• AWS SDK for .NET
• AWS SDK for C++
• AWS SDK for Go
• AWS SDK for Java V2
• AWS SDK for JavaScript
• AWS SDK for PHP V3
• AWS SDK for Python
• AWS SDK for Ruby V3
GetAWSDefaultServiceQuota
GetAWSDefaultServiceQuota
Retrieves the default value for the specified quota. The default value does not reflect any quota increases.
Related Actions
• ListAWSDefaultServiceQuotas (p. 23)
• ListServices (p. 38)
• ListServiceQuotas (p. 35)
Request Syntax
{
"QuotaCode": "string", "ServiceCode": "string"
}
Request Parameters
For information about the parameters that are common to all actions, see Common Parameters (p. 66).
The request accepts the following data in JSON format.
QuotaCode (p. 12) The quota identifier.
Type: String
Length Constraints: Minimum length of 1. Maximum length of 128.
Pattern: [a-zA-Z][a-zA-Z0-9-]{1,128}
Required: Yes ServiceCode (p. 12)
The service identifier.
Type: String
Length Constraints: Minimum length of 1. Maximum length of 63.
Pattern: [a-zA-Z][a-zA-Z0-9-]{1,63}
Required: Yes
Response Syntax
{ "Quota": {
"Adjustable": boolean, "ErrorReason": {
Response Elements
"ErrorCode": "string", "ErrorMessage": "string"
},
"GlobalQuota": boolean, "Period": {
"PeriodUnit": "string", "PeriodValue": number },
"QuotaArn": "string", "QuotaCode": "string", "QuotaName": "string", "ServiceCode": "string", "ServiceName": "string", "Unit": "string", "UsageMetric": {
"MetricDimensions": { "string" : "string"
},
"MetricName": "string", "MetricNamespace": "string",
"MetricStatisticRecommendation": "string"
},
"Value": number }
}
Response Elements
If the action is successful, the service sends back an HTTP 200 response.
The following data is returned in JSON format by the service.
Quota (p. 12)
Information about the quota.
Type: ServiceQuota (p. 61) object
Errors
For information about the errors that are common to all actions, see Common Errors (p. 68).
AccessDeniedException
You do not have sufficient permission to perform this action.
HTTP Status Code: 400 IllegalArgumentException
Invalid input was provided.
HTTP Status Code: 400 NoSuchResourceException
The specified resource does not exist.
HTTP Status Code: 400 ServiceException
Something went wrong.
See Also
HTTP Status Code: 500 TooManyRequestsException
Due to throttling, the request was denied. Slow down the rate of request calls, or request an increase for this quota.
HTTP Status Code: 400
See Also
For more information about using this API in one of the language-specific AWS SDKs, see the following:
• AWS Command Line Interface
• AWS SDK for .NET
• AWS SDK for C++
• AWS SDK for Go
• AWS SDK for Java V2
• AWS SDK for JavaScript
• AWS SDK for PHP V3
• AWS SDK for Python
• AWS SDK for Ruby V3
GetRequestedServiceQuotaChange
GetRequestedServiceQuotaChange
Retrieves information about the specified quota increase request.
Request Syntax
{ "RequestId": "string"
}
Request Parameters
For information about the parameters that are common to all actions, see Common Parameters (p. 66).
The request accepts the following data in JSON format.
RequestId (p. 15)
The ID of the quota increase request.
Type: String
Length Constraints: Minimum length of 1. Maximum length of 128.
Pattern: [0-9a-zA-Z][a-zA-Z0-9-]{1,128}
Required: Yes
Response Syntax
{
"RequestedQuota": { "CaseId": "string", "Created": number, "DesiredValue": number, "GlobalQuota": boolean, "Id": "string",
"LastUpdated": number, "QuotaArn": "string", "QuotaCode": "string", "QuotaName": "string", "Requester": "string", "ServiceCode": "string", "ServiceName": "string", "Status": "string", "Unit": "string"
}}
Response Elements
If the action is successful, the service sends back an HTTP 200 response.
The following data is returned in JSON format by the service.
Errors
RequestedQuota (p. 15)
Information about the quota increase request.
Type: RequestedServiceQuotaChange (p. 57) object
Errors
For information about the errors that are common to all actions, see Common Errors (p. 68).
AccessDeniedException
You do not have sufficient permission to perform this action.
HTTP Status Code: 400 IllegalArgumentException
Invalid input was provided.
HTTP Status Code: 400 NoSuchResourceException
The specified resource does not exist.
HTTP Status Code: 400 ServiceException
Something went wrong.
HTTP Status Code: 500 TooManyRequestsException
Due to throttling, the request was denied. Slow down the rate of request calls, or request an increase for this quota.
HTTP Status Code: 400
See Also
For more information about using this API in one of the language-specific AWS SDKs, see the following:
• AWS Command Line Interface
• AWS SDK for .NET
• AWS SDK for C++
• AWS SDK for Go
• AWS SDK for Java V2
• AWS SDK for JavaScript
• AWS SDK for PHP V3
• AWS SDK for Python
• AWS SDK for Ruby V3
GetServiceQuota
GetServiceQuota
Retrieves the applied quota value for the specified quota. For some quotas, only the default values are available. If the applied quota value is not available for a quota, the quota is not retrieved.
Related Actions
• ListAWSDefaultServiceQuotas (p. 23)
• ListServices (p. 38)
• ListServiceQuotas (p. 35)
Request Syntax
{
"QuotaCode": "string", "ServiceCode": "string"
}
Request Parameters
For information about the parameters that are common to all actions, see Common Parameters (p. 66).
The request accepts the following data in JSON format.
QuotaCode (p. 17) The quota identifier.
Type: String
Length Constraints: Minimum length of 1. Maximum length of 128.
Pattern: [a-zA-Z][a-zA-Z0-9-]{1,128}
Required: Yes ServiceCode (p. 17)
The service identifier.
Type: String
Length Constraints: Minimum length of 1. Maximum length of 63.
Pattern: [a-zA-Z][a-zA-Z0-9-]{1,63}
Required: Yes
Response Syntax
{ "Quota": {
"Adjustable": boolean, "ErrorReason": {
Response Elements
"ErrorCode": "string", "ErrorMessage": "string"
},
"GlobalQuota": boolean, "Period": {
"PeriodUnit": "string", "PeriodValue": number },
"QuotaArn": "string", "QuotaCode": "string", "QuotaName": "string", "ServiceCode": "string", "ServiceName": "string", "Unit": "string", "UsageMetric": {
"MetricDimensions": { "string" : "string"
},
"MetricName": "string", "MetricNamespace": "string",
"MetricStatisticRecommendation": "string"
},
"Value": number }
}
Response Elements
If the action is successful, the service sends back an HTTP 200 response.
The following data is returned in JSON format by the service.
Quota (p. 17)
Information about the quota.
Type: ServiceQuota (p. 61) object
Errors
For information about the errors that are common to all actions, see Common Errors (p. 68).
AccessDeniedException
You do not have sufficient permission to perform this action.
HTTP Status Code: 400 IllegalArgumentException
Invalid input was provided.
HTTP Status Code: 400 NoSuchResourceException
The specified resource does not exist.
HTTP Status Code: 400 ServiceException
Something went wrong.
See Also
HTTP Status Code: 500 TooManyRequestsException
Due to throttling, the request was denied. Slow down the rate of request calls, or request an increase for this quota.
HTTP Status Code: 400
See Also
For more information about using this API in one of the language-specific AWS SDKs, see the following:
• AWS Command Line Interface
• AWS SDK for .NET
• AWS SDK for C++
• AWS SDK for Go
• AWS SDK for Java V2
• AWS SDK for JavaScript
• AWS SDK for PHP V3
• AWS SDK for Python
• AWS SDK for Ruby V3
GetServiceQuotaIncreaseRequestFromTemplate
GetServiceQuotaIncreaseRequestFromTemplate
Retrieves information about the specified quota increase request in your quota request template.
Related Actions
• DeleteServiceQuotaIncreaseRequestFromTemplate (p. 5)
• ListServiceQuotaIncreaseRequestsInTemplate (p. 32)
• PutServiceQuotaIncreaseRequestIntoTemplate (p. 43)
Request Syntax
{ "AwsRegion": "string", "QuotaCode": "string", "ServiceCode": "string"
}
Request Parameters
For information about the parameters that are common to all actions, see Common Parameters (p. 66).
The request accepts the following data in JSON format.
AwsRegion (p. 20) The AWS Region.
Type: String
Length Constraints: Minimum length of 1. Maximum length of 64.
Pattern: [a-zA-Z][a-zA-Z0-9-]{1,128}
Required: Yes QuotaCode (p. 20)
The quota identifier.
Type: String
Length Constraints: Minimum length of 1. Maximum length of 128.
Pattern: [a-zA-Z][a-zA-Z0-9-]{1,128}
Required: Yes ServiceCode (p. 20)
The service identifier.
Type: String
Length Constraints: Minimum length of 1. Maximum length of 63.
Response Syntax
Pattern: [a-zA-Z][a-zA-Z0-9-]{1,63}
Required: Yes
Response Syntax
{ "ServiceQuotaIncreaseRequestInTemplate": { "AwsRegion": "string",
"DesiredValue": number, "GlobalQuota": boolean, "QuotaCode": "string", "QuotaName": "string", "ServiceCode": "string", "ServiceName": "string", "Unit": "string"
}}
Response Elements
If the action is successful, the service sends back an HTTP 200 response.
The following data is returned in JSON format by the service.
ServiceQuotaIncreaseRequestInTemplate (p. 21) Information about the quota increase request.
Type: ServiceQuotaIncreaseRequestInTemplate (p. 63) object
Errors
For information about the errors that are common to all actions, see Common Errors (p. 68).
AccessDeniedException
You do not have sufficient permission to perform this action.
HTTP Status Code: 400
AWSServiceAccessNotEnabledException
The action you attempted is not allowed unless Service Access with Service Quotas is enabled in your organization.
HTTP Status Code: 400
DependencyAccessDeniedException
You can't perform this action because a dependency does not have access.
HTTP Status Code: 400 IllegalArgumentException
Invalid input was provided.
HTTP Status Code: 400
See Also
NoAvailableOrganizationException
The account making this call is not a member of an organization.
HTTP Status Code: 400 NoSuchResourceException
The specified resource does not exist.
HTTP Status Code: 400 ServiceException
Something went wrong.
HTTP Status Code: 500
TemplatesNotAvailableInRegionException
The Service Quotas template is not available in this AWS Region.
HTTP Status Code: 400 TooManyRequestsException
Due to throttling, the request was denied. Slow down the rate of request calls, or request an increase for this quota.
HTTP Status Code: 400
See Also
For more information about using this API in one of the language-specific AWS SDKs, see the following:
• AWS Command Line Interface
• AWS SDK for .NET
• AWS SDK for C++
• AWS SDK for Go
• AWS SDK for Java V2
• AWS SDK for JavaScript
• AWS SDK for PHP V3
• AWS SDK for Python
• AWS SDK for Ruby V3
ListAWSDefaultServiceQuotas
ListAWSDefaultServiceQuotas
Lists the default values for the quotas for the specified AWS service. A default value does not reflect any quota increases.
Related Actions
• GetAWSDefaultServiceQuota (p. 12)
• ListServices (p. 38)
• ListServiceQuotas (p. 35)
Request Syntax
{
"MaxResults": number, "NextToken": "string", "ServiceCode": "string"
}
Request Parameters
For information about the parameters that are common to all actions, see Common Parameters (p. 66).
The request accepts the following data in JSON format.
MaxResults (p. 23)
The maximum number of results to return with a single call. To retrieve the remaining results, if any, make another call with the token returned from this call.
Type: Integer
Valid Range: Minimum value of 1. Maximum value of 100.
Required: No NextToken (p. 23)
The token for the next page of results.
Type: String
Length Constraints: Maximum length of 2048.
Pattern: ^[a-zA-Z0-9/+]*={0,2}$
Required: No ServiceCode (p. 23)
The service identifier.
Type: String
Length Constraints: Minimum length of 1. Maximum length of 63.
Response Syntax
Pattern: [a-zA-Z][a-zA-Z0-9-]{1,63}
Required: Yes
Response Syntax
{ "NextToken": "string", "Quotas": [
{
"Adjustable": boolean, "ErrorReason": {
"ErrorCode": "string", "ErrorMessage": "string"
},
"GlobalQuota": boolean, "Period": {
"PeriodUnit": "string", "PeriodValue": number },
"QuotaArn": "string", "QuotaCode": "string", "QuotaName": "string", "ServiceCode": "string", "ServiceName": "string", "Unit": "string", "UsageMetric": {
"MetricDimensions": { "string" : "string"
},
"MetricName": "string", "MetricNamespace": "string",
"MetricStatisticRecommendation": "string"
},
"Value": number }
]}
Response Elements
If the action is successful, the service sends back an HTTP 200 response.
The following data is returned in JSON format by the service.
NextToken (p. 24)
The token to use to retrieve the next page of results. This value is null when there are no more results to return.
Type: String
Length Constraints: Maximum length of 2048.
Pattern: ^[a-zA-Z0-9/+]*={0,2}$
Quotas (p. 24)
Information about the quotas.
Type: Array of ServiceQuota (p. 61) objects
Errors
Errors
For information about the errors that are common to all actions, see Common Errors (p. 68).
AccessDeniedException
You do not have sufficient permission to perform this action.
HTTP Status Code: 400 IllegalArgumentException
Invalid input was provided.
HTTP Status Code: 400 InvalidPaginationTokenException
Invalid input was provided.
HTTP Status Code: 400 NoSuchResourceException
The specified resource does not exist.
HTTP Status Code: 400 ServiceException
Something went wrong.
HTTP Status Code: 500 TooManyRequestsException
Due to throttling, the request was denied. Slow down the rate of request calls, or request an increase for this quota.
HTTP Status Code: 400
See Also
For more information about using this API in one of the language-specific AWS SDKs, see the following:
• AWS Command Line Interface
• AWS SDK for .NET
• AWS SDK for C++
• AWS SDK for Go
• AWS SDK for Java V2
• AWS SDK for JavaScript
• AWS SDK for PHP V3
• AWS SDK for Python
• AWS SDK for Ruby V3
ListRequestedServiceQuotaChangeHistory
ListRequestedServiceQuotaChangeHistory
Retrieves the quota increase requests for the specified service.
Request Syntax
{
"MaxResults": number, "NextToken": "string", "ServiceCode": "string", "Status": "string"
}
Request Parameters
For information about the parameters that are common to all actions, see Common Parameters (p. 66).
The request accepts the following data in JSON format.
MaxResults (p. 26)
The maximum number of results to return with a single call. To retrieve the remaining results, if any, make another call with the token returned from this call.
Type: Integer
Valid Range: Minimum value of 1. Maximum value of 100.
Required: No NextToken (p. 26)
The token for the next page of results.
Type: String
Length Constraints: Maximum length of 2048.
Pattern: ^[a-zA-Z0-9/+]*={0,2}$
Required: No ServiceCode (p. 26)
The service identifier.
Type: String
Length Constraints: Minimum length of 1. Maximum length of 63.
Pattern: [a-zA-Z][a-zA-Z0-9-]{1,63}
Required: No Status (p. 26)
The status of the quota increase request.
Type: String
Response Syntax
Valid Values: PENDING | CASE_OPENED | APPROVED | DENIED | CASE_CLOSED Required: No
Response Syntax
{ "NextToken": "string", "RequestedQuotas": [ {
"CaseId": "string", "Created": number, "DesiredValue": number, "GlobalQuota": boolean, "Id": "string",
"LastUpdated": number, "QuotaArn": "string", "QuotaCode": "string", "QuotaName": "string", "Requester": "string", "ServiceCode": "string", "ServiceName": "string", "Status": "string", "Unit": "string"
} ]}
Response Elements
If the action is successful, the service sends back an HTTP 200 response.
The following data is returned in JSON format by the service.
NextToken (p. 27)
The token to use to retrieve the next page of results. This value is null when there are no more results to return.
Type: String
Length Constraints: Maximum length of 2048.
Pattern: ^[a-zA-Z0-9/+]*={0,2}$
RequestedQuotas (p. 27)
Information about the quota increase requests.
Type: Array of RequestedServiceQuotaChange (p. 57) objects
Errors
For information about the errors that are common to all actions, see Common Errors (p. 68).
AccessDeniedException
You do not have sufficient permission to perform this action.
See Also
HTTP Status Code: 400 IllegalArgumentException
Invalid input was provided.
HTTP Status Code: 400 InvalidPaginationTokenException
Invalid input was provided.
HTTP Status Code: 400 NoSuchResourceException
The specified resource does not exist.
HTTP Status Code: 400 ServiceException
Something went wrong.
HTTP Status Code: 500 TooManyRequestsException
Due to throttling, the request was denied. Slow down the rate of request calls, or request an increase for this quota.
HTTP Status Code: 400
See Also
For more information about using this API in one of the language-specific AWS SDKs, see the following:
• AWS Command Line Interface
• AWS SDK for .NET
• AWS SDK for C++
• AWS SDK for Go
• AWS SDK for Java V2
• AWS SDK for JavaScript
• AWS SDK for PHP V3
• AWS SDK for Python
• AWS SDK for Ruby V3
ListRequestedServiceQuotaChangeHistoryByQuota
ListRequestedServiceQuotaChangeHistoryByQuota
Retrieves the quota increase requests for the specified quota.
Request Syntax
{
"MaxResults": number, "NextToken": "string", "QuotaCode": "string", "ServiceCode": "string", "Status": "string"
}
Request Parameters
For information about the parameters that are common to all actions, see Common Parameters (p. 66).
The request accepts the following data in JSON format.
MaxResults (p. 29)
The maximum number of results to return with a single call. To retrieve the remaining results, if any, make another call with the token returned from this call.
Type: Integer
Valid Range: Minimum value of 1. Maximum value of 100.
Required: No NextToken (p. 29)
The token for the next page of results.
Type: String
Length Constraints: Maximum length of 2048.
Pattern: ^[a-zA-Z0-9/+]*={0,2}$
Required: No QuotaCode (p. 29)
The quota identifier.
Type: String
Length Constraints: Minimum length of 1. Maximum length of 128.
Pattern: [a-zA-Z][a-zA-Z0-9-]{1,128}
Required: Yes ServiceCode (p. 29)
The service identifier.
Type: String
Response Syntax
Length Constraints: Minimum length of 1. Maximum length of 63.
Pattern: [a-zA-Z][a-zA-Z0-9-]{1,63}
Required: Yes Status (p. 29)
The status value of the quota increase request.
Type: String
Valid Values: PENDING | CASE_OPENED | APPROVED | DENIED | CASE_CLOSED Required: No
Response Syntax
{
"NextToken": "string", "RequestedQuotas": [ {
"CaseId": "string", "Created": number, "DesiredValue": number, "GlobalQuota": boolean, "Id": "string",
"LastUpdated": number, "QuotaArn": "string", "QuotaCode": "string", "QuotaName": "string", "Requester": "string", "ServiceCode": "string", "ServiceName": "string", "Status": "string", "Unit": "string"
} ]}
Response Elements
If the action is successful, the service sends back an HTTP 200 response.
The following data is returned in JSON format by the service.
NextToken (p. 30)
The token to use to retrieve the next page of results. This value is null when there are no more results to return.
Type: String
Length Constraints: Maximum length of 2048.
Pattern: ^[a-zA-Z0-9/+]*={0,2}$
RequestedQuotas (p. 30)
Information about the quota increase requests.
Errors
Type: Array of RequestedServiceQuotaChange (p. 57) objects
Errors
For information about the errors that are common to all actions, see Common Errors (p. 68).
AccessDeniedException
You do not have sufficient permission to perform this action.
HTTP Status Code: 400 IllegalArgumentException
Invalid input was provided.
HTTP Status Code: 400 InvalidPaginationTokenException
Invalid input was provided.
HTTP Status Code: 400 NoSuchResourceException
The specified resource does not exist.
HTTP Status Code: 400 ServiceException
Something went wrong.
HTTP Status Code: 500 TooManyRequestsException
Due to throttling, the request was denied. Slow down the rate of request calls, or request an increase for this quota.
HTTP Status Code: 400
See Also
For more information about using this API in one of the language-specific AWS SDKs, see the following:
• AWS Command Line Interface
• AWS SDK for .NET
• AWS SDK for C++
• AWS SDK for Go
• AWS SDK for Java V2
• AWS SDK for JavaScript
• AWS SDK for PHP V3
• AWS SDK for Python
• AWS SDK for Ruby V3
ListServiceQuotaIncreaseRequestsInTemplate
ListServiceQuotaIncreaseRequestsInTemplate
Lists the quota increase requests in the specified quota request template.
Request Syntax
{ "AwsRegion": "string", "MaxResults": number, "NextToken": "string", "ServiceCode": "string"
}
Request Parameters
For information about the parameters that are common to all actions, see Common Parameters (p. 66).
The request accepts the following data in JSON format.
AwsRegion (p. 32) The AWS Region.
Type: String
Length Constraints: Minimum length of 1. Maximum length of 64.
Pattern: [a-zA-Z][a-zA-Z0-9-]{1,128}
Required: No MaxResults (p. 32)
The maximum number of results to return with a single call. To retrieve the remaining results, if any, make another call with the token returned from this call.
Type: Integer
Valid Range: Minimum value of 1. Maximum value of 100.
Required: No NextToken (p. 32)
The token for the next page of results.
Type: String
Length Constraints: Maximum length of 2048.
Pattern: ^[a-zA-Z0-9/+]*={0,2}$
Required: No ServiceCode (p. 32)
The service identifier.
Response Syntax
Type: String
Length Constraints: Minimum length of 1. Maximum length of 63.
Pattern: [a-zA-Z][a-zA-Z0-9-]{1,63}
Required: No
Response Syntax
{ "NextToken": "string",
"ServiceQuotaIncreaseRequestInTemplateList": [ {
"AwsRegion": "string", "DesiredValue": number, "GlobalQuota": boolean, "QuotaCode": "string", "QuotaName": "string", "ServiceCode": "string", "ServiceName": "string", "Unit": "string"
} ]}
Response Elements
If the action is successful, the service sends back an HTTP 200 response.
The following data is returned in JSON format by the service.
NextToken (p. 33)
The token to use to retrieve the next page of results. This value is null when there are no more results to return.
Type: String
Length Constraints: Maximum length of 2048.
Pattern: ^[a-zA-Z0-9/+]*={0,2}$
ServiceQuotaIncreaseRequestInTemplateList (p. 33) Information about the quota increase requests.
Type: Array of ServiceQuotaIncreaseRequestInTemplate (p. 63) objects
Errors
For information about the errors that are common to all actions, see Common Errors (p. 68).
AccessDeniedException
You do not have sufficient permission to perform this action.
HTTP Status Code: 400
See Also
AWSServiceAccessNotEnabledException
The action you attempted is not allowed unless Service Access with Service Quotas is enabled in your organization.
HTTP Status Code: 400
DependencyAccessDeniedException
You can't perform this action because a dependency does not have access.
HTTP Status Code: 400 IllegalArgumentException
Invalid input was provided.
HTTP Status Code: 400
NoAvailableOrganizationException
The account making this call is not a member of an organization.
HTTP Status Code: 400 ServiceException
Something went wrong.
HTTP Status Code: 500
TemplatesNotAvailableInRegionException
The Service Quotas template is not available in this AWS Region.
HTTP Status Code: 400 TooManyRequestsException
Due to throttling, the request was denied. Slow down the rate of request calls, or request an increase for this quota.
HTTP Status Code: 400
See Also
For more information about using this API in one of the language-specific AWS SDKs, see the following:
• AWS Command Line Interface
• AWS SDK for .NET
• AWS SDK for C++
• AWS SDK for Go
• AWS SDK for Java V2
• AWS SDK for JavaScript
• AWS SDK for PHP V3
• AWS SDK for Python
• AWS SDK for Ruby V3
ListServiceQuotas
ListServiceQuotas
Lists the applied quota values for the specified AWS service. For some quotas, only the default values are available. If the applied quota value is not available for a quota, the quota is not retrieved.
Related Actions
• GetServiceQuota (p. 17)
• ListAWSDefaultServiceQuotas (p. 23)
• ListServices (p. 38)
• RequestServiceQuotaIncrease (p. 46)
Request Syntax
{
"MaxResults": number, "NextToken": "string", "ServiceCode": "string"
}
Request Parameters
For information about the parameters that are common to all actions, see Common Parameters (p. 66).
The request accepts the following data in JSON format.
MaxResults (p. 35)
The maximum number of results to return with a single call. To retrieve the remaining results, if any, make another call with the token returned from this call.
Type: Integer
Valid Range: Minimum value of 1. Maximum value of 100.
Required: No NextToken (p. 35)
The token for the next page of results.
Type: String
Length Constraints: Maximum length of 2048.
Pattern: ^[a-zA-Z0-9/+]*={0,2}$
Required: No ServiceCode (p. 35)
The service identifier.
Type: String
Length Constraints: Minimum length of 1. Maximum length of 63.
Response Syntax
Pattern: [a-zA-Z][a-zA-Z0-9-]{1,63}
Required: Yes
Response Syntax
{ "NextToken": "string", "Quotas": [
{
"Adjustable": boolean, "ErrorReason": {
"ErrorCode": "string", "ErrorMessage": "string"
},
"GlobalQuota": boolean, "Period": {
"PeriodUnit": "string", "PeriodValue": number },
"QuotaArn": "string", "QuotaCode": "string", "QuotaName": "string", "ServiceCode": "string", "ServiceName": "string", "Unit": "string", "UsageMetric": {
"MetricDimensions": { "string" : "string"
},
"MetricName": "string", "MetricNamespace": "string",
"MetricStatisticRecommendation": "string"
},
"Value": number }
]}
Response Elements
If the action is successful, the service sends back an HTTP 200 response.
The following data is returned in JSON format by the service.
NextToken (p. 36)
The token to use to retrieve the next page of results. This value is null when there are no more results to return.
Type: String
Length Constraints: Maximum length of 2048.
Pattern: ^[a-zA-Z0-9/+]*={0,2}$
Quotas (p. 36)
Information about the quotas.
Type: Array of ServiceQuota (p. 61) objects
Errors
Errors
For information about the errors that are common to all actions, see Common Errors (p. 68).
AccessDeniedException
You do not have sufficient permission to perform this action.
HTTP Status Code: 400 IllegalArgumentException
Invalid input was provided.
HTTP Status Code: 400 InvalidPaginationTokenException
Invalid input was provided.
HTTP Status Code: 400 NoSuchResourceException
The specified resource does not exist.
HTTP Status Code: 400 ServiceException
Something went wrong.
HTTP Status Code: 500 TooManyRequestsException
Due to throttling, the request was denied. Slow down the rate of request calls, or request an increase for this quota.
HTTP Status Code: 400
See Also
For more information about using this API in one of the language-specific AWS SDKs, see the following:
• AWS Command Line Interface
• AWS SDK for .NET
• AWS SDK for C++
• AWS SDK for Go
• AWS SDK for Java V2
• AWS SDK for JavaScript
• AWS SDK for PHP V3
• AWS SDK for Python
• AWS SDK for Ruby V3
ListServices
ListServices
Lists the names and codes for the services integrated with Service Quotas.
Related Actions
• ListAWSDefaultServiceQuotas (p. 23)
• ListServiceQuotas (p. 35)
• RequestServiceQuotaIncrease (p. 46)
Request Syntax
{ "MaxResults": number, "NextToken": "string"
}
Request Parameters
For information about the parameters that are common to all actions, see Common Parameters (p. 66).
The request accepts the following data in JSON format.
MaxResults (p. 38)
The maximum number of results to return with a single call. To retrieve the remaining results, if any, make another call with the token returned from this call.
Type: Integer
Valid Range: Minimum value of 1. Maximum value of 100.
Required: No NextToken (p. 38)
The token for the next page of results.
Type: String
Length Constraints: Maximum length of 2048.
Pattern: ^[a-zA-Z0-9/+]*={0,2}$
Required: No
Response Syntax
{ "NextToken": "string", "Services": [
{
"ServiceCode": "string",
Response Elements
"ServiceName": "string"
} ]}
Response Elements
If the action is successful, the service sends back an HTTP 200 response.
The following data is returned in JSON format by the service.
NextToken (p. 38)
The token to use to retrieve the next page of results. This value is null when there are no more results to return.
Type: String
Length Constraints: Maximum length of 2048.
Pattern: ^[a-zA-Z0-9/+]*={0,2}$
Services (p. 38)
Information about the services.
Type: Array of ServiceInfo (p. 60) objects
Errors
For information about the errors that are common to all actions, see Common Errors (p. 68).
AccessDeniedException
You do not have sufficient permission to perform this action.
HTTP Status Code: 400 IllegalArgumentException
Invalid input was provided.
HTTP Status Code: 400 InvalidPaginationTokenException
Invalid input was provided.
HTTP Status Code: 400 ServiceException
Something went wrong.
HTTP Status Code: 500 TooManyRequestsException
Due to throttling, the request was denied. Slow down the rate of request calls, or request an increase for this quota.
HTTP Status Code: 400
See Also
See Also
For more information about using this API in one of the language-specific AWS SDKs, see the following:
• AWS Command Line Interface
• AWS SDK for .NET
• AWS SDK for C++
• AWS SDK for Go
• AWS SDK for Java V2
• AWS SDK for JavaScript
• AWS SDK for PHP V3
• AWS SDK for Python
• AWS SDK for Ruby V3
ListTagsForResource
ListTagsForResource
Returns a list of the tags assigned to the specified applied quota.
Request Syntax
{
"ResourceARN": "string"
}
Request Parameters
For information about the parameters that are common to all actions, see Common Parameters (p. 66).
The request accepts the following data in JSON format.
ResourceARN (p. 41)
The Amazon Resource Name (ARN) for the applied quota for which you want to list tags. You can get this information by using the Service Quotas console, or by listing the quotas using the list-service- quotas AWS CLI command or the ListServiceQuotas AWS API operation.
Type: String
Length Constraints: Minimum length of 1. Maximum length of 1011.
Pattern: arn:aws(-[\w]+)*:*:.+:[0-9]{12}:.+
Required: Yes
Response Syntax
{
"Tags": [ {
"Key": "string", "Value": "string"
} ]}
Response Elements
If the action is successful, the service sends back an HTTP 200 response.
The following data is returned in JSON format by the service.
Tags (p. 41)
A complex data type that contains zero or more tag elements.
Type: Array of Tag (p. 65) objects
Array Members: Maximum number of 200 items.
Errors
Errors
For information about the errors that are common to all actions, see Common Errors (p. 68).
AccessDeniedException
You do not have sufficient permission to perform this action.
HTTP Status Code: 400 IllegalArgumentException
Invalid input was provided.
HTTP Status Code: 400 NoSuchResourceException
The specified resource does not exist.
HTTP Status Code: 400 ServiceException
Something went wrong.
HTTP Status Code: 500 TooManyRequestsException
Due to throttling, the request was denied. Slow down the rate of request calls, or request an increase for this quota.
HTTP Status Code: 400
See Also
For more information about using this API in one of the language-specific AWS SDKs, see the following:
• AWS Command Line Interface
• AWS SDK for .NET
• AWS SDK for C++
• AWS SDK for Go
• AWS SDK for Java V2
• AWS SDK for JavaScript
• AWS SDK for PHP V3
• AWS SDK for Python
• AWS SDK for Ruby V3
PutServiceQuotaIncreaseRequestIntoTemplate
PutServiceQuotaIncreaseRequestIntoTemplate
Adds a quota increase request to your quota request template.
Related Actions
• DeleteServiceQuotaIncreaseRequestFromTemplate (p. 5)
• GetServiceQuotaIncreaseRequestFromTemplate (p. 20)
• ListServiceQuotaIncreaseRequestsInTemplate (p. 32)
Request Syntax
{ "AwsRegion": "string", "DesiredValue": number, "QuotaCode": "string", "ServiceCode": "string"
}
Request Parameters
For information about the parameters that are common to all actions, see Common Parameters (p. 66).
The request accepts the following data in JSON format.
AwsRegion (p. 43) The AWS Region.
Type: String
Length Constraints: Minimum length of 1. Maximum length of 64.
Pattern: [a-zA-Z][a-zA-Z0-9-]{1,128}
Required: Yes DesiredValue (p. 43)
The new, increased value for the quota.
Type: Double
Valid Range: Minimum value of 0. Maximum value of 10000000000.
Required: Yes QuotaCode (p. 43)
The quota identifier.
Type: String
Length Constraints: Minimum length of 1. Maximum length of 128.
Pattern: [a-zA-Z][a-zA-Z0-9-]{1,128}
Required: Yes
Response Syntax
ServiceCode (p. 43) The service identifier.
Type: String
Length Constraints: Minimum length of 1. Maximum length of 63.
Pattern: [a-zA-Z][a-zA-Z0-9-]{1,63}
Required: Yes
Response Syntax
{ "ServiceQuotaIncreaseRequestInTemplate": { "AwsRegion": "string",
"DesiredValue": number, "GlobalQuota": boolean, "QuotaCode": "string", "QuotaName": "string", "ServiceCode": "string", "ServiceName": "string", "Unit": "string"
}}
Response Elements
If the action is successful, the service sends back an HTTP 200 response.
The following data is returned in JSON format by the service.
ServiceQuotaIncreaseRequestInTemplate (p. 44) Information about the quota increase request.
Type: ServiceQuotaIncreaseRequestInTemplate (p. 63) object
Errors
For information about the errors that are common to all actions, see Common Errors (p. 68).
AccessDeniedException
You do not have sufficient permission to perform this action.
HTTP Status Code: 400
AWSServiceAccessNotEnabledException
The action you attempted is not allowed unless Service Access with Service Quotas is enabled in your organization.
HTTP Status Code: 400
DependencyAccessDeniedException
You can't perform this action because a dependency does not have access.
See Also
HTTP Status Code: 400 IllegalArgumentException
Invalid input was provided.
HTTP Status Code: 400
NoAvailableOrganizationException
The account making this call is not a member of an organization.
HTTP Status Code: 400 NoSuchResourceException
The specified resource does not exist.
HTTP Status Code: 400 QuotaExceededException
You have exceeded your service quota. To perform the requested action, remove some of the relevant resources, or use Service Quotas to request a service quota increase.
HTTP Status Code: 400 ServiceException
Something went wrong.
HTTP Status Code: 500
TemplatesNotAvailableInRegionException
The Service Quotas template is not available in this AWS Region.
HTTP Status Code: 400 TooManyRequestsException
Due to throttling, the request was denied. Slow down the rate of request calls, or request an increase for this quota.
HTTP Status Code: 400
See Also
For more information about using this API in one of the language-specific AWS SDKs, see the following:
• AWS Command Line Interface
• AWS SDK for .NET
• AWS SDK for C++
• AWS SDK for Go
• AWS SDK for Java V2
• AWS SDK for JavaScript
• AWS SDK for PHP V3
• AWS SDK for Python
• AWS SDK for Ruby V3
RequestServiceQuotaIncrease
RequestServiceQuotaIncrease
Submits a quota increase request for the specified quota.
Related Actions
• GetRequestedServiceQuotaChange (p. 15)
• ListRequestedServiceQuotaChangeHistory (p. 26)
• ListRequestedServiceQuotaChangeHistoryByQuota (p. 29)
Request Syntax
{ "DesiredValue": number, "QuotaCode": "string", "ServiceCode": "string"
}
Request Parameters
For information about the parameters that are common to all actions, see Common Parameters (p. 66).
The request accepts the following data in JSON format.
DesiredValue (p. 46)
The new, increased value for the quota.
Type: Double
Valid Range: Minimum value of 0. Maximum value of 10000000000.
Required: Yes QuotaCode (p. 46)
The quota identifier.
Type: String
Length Constraints: Minimum length of 1. Maximum length of 128.
Pattern: [a-zA-Z][a-zA-Z0-9-]{1,128}
Required: Yes ServiceCode (p. 46)
The service identifier.
Type: String
Length Constraints: Minimum length of 1. Maximum length of 63.
Pattern: [a-zA-Z][a-zA-Z0-9-]{1,63}
Required: Yes
Response Syntax
Response Syntax
{
"RequestedQuota": { "CaseId": "string", "Created": number, "DesiredValue": number, "GlobalQuota": boolean, "Id": "string",
"LastUpdated": number, "QuotaArn": "string", "QuotaCode": "string", "QuotaName": "string", "Requester": "string", "ServiceCode": "string", "ServiceName": "string", "Status": "string", "Unit": "string"
}}
Response Elements
If the action is successful, the service sends back an HTTP 200 response.
The following data is returned in JSON format by the service.
RequestedQuota (p. 47)
Information about the quota increase request.
Type: RequestedServiceQuotaChange (p. 57) object
Errors
For information about the errors that are common to all actions, see Common Errors (p. 68).
AccessDeniedException
You do not have sufficient permission to perform this action.
HTTP Status Code: 400
DependencyAccessDeniedException
You can't perform this action because a dependency does not have access.
HTTP Status Code: 400 IllegalArgumentException
Invalid input was provided.
HTTP Status Code: 400 InvalidResourceStateException
The resource is in an invalid state.
HTTP Status Code: 400
See Also
NoSuchResourceException
The specified resource does not exist.
HTTP Status Code: 400 QuotaExceededException
You have exceeded your service quota. To perform the requested action, remove some of the relevant resources, or use Service Quotas to request a service quota increase.
HTTP Status Code: 400 ResourceAlreadyExistsException
The specified resource already exists.
HTTP Status Code: 400 ServiceException
Something went wrong.
HTTP Status Code: 500 TooManyRequestsException
Due to throttling, the request was denied. Slow down the rate of request calls, or request an increase for this quota.
HTTP Status Code: 400
See Also
For more information about using this API in one of the language-specific AWS SDKs, see the following:
• AWS Command Line Interface
• AWS SDK for .NET
• AWS SDK for C++
• AWS SDK for Go
• AWS SDK for Java V2
• AWS SDK for JavaScript
• AWS SDK for PHP V3
• AWS SDK for Python
• AWS SDK for Ruby V3
TagResource
TagResource
Adds tags to the specified applied quota. You can include one or more tags to add to the quota.
Request Syntax
{
"ResourceARN": "string", "Tags": [
{
"Key": "string", "Value": "string"
} ] }
Request Parameters
For information about the parameters that are common to all actions, see Common Parameters (p. 66).
The request accepts the following data in JSON format.
ResourceARN (p. 49)
The Amazon Resource Name (ARN) for the applied quota. You can get this information by using the Service Quotas console, or by listing the quotas using the list-service-quotas AWS CLI command or the ListServiceQuotas AWS API operation.
Type: String
Length Constraints: Minimum length of 1. Maximum length of 1011.
Pattern: arn:aws(-[\w]+)*:*:.+:[0-9]{12}:.+
Required: Yes Tags (p. 49)
The tags that you want to add to the resource.
Type: Array of Tag (p. 65) objects
Array Members: Minimum number of 1 item.
Required: Yes
Response Elements
If the action is successful, the service sends back an HTTP 200 response with an empty HTTP body.
Errors
For information about the errors that are common to all actions, see Common Errors (p. 68).
See Also
AccessDeniedException
You do not have sufficient permission to perform this action.
HTTP Status Code: 400 IllegalArgumentException
Invalid input was provided.
HTTP Status Code: 400 NoSuchResourceException
The specified resource does not exist.
HTTP Status Code: 400 ServiceException
Something went wrong.
HTTP Status Code: 500 TagPolicyViolationException
The specified tag is a reserved word and cannot be used.
HTTP Status Code: 400 TooManyRequestsException
Due to throttling, the request was denied. Slow down the rate of request calls, or request an increase for this quota.
HTTP Status Code: 400 TooManyTagsException
You've exceeded the number of tags allowed for a resource. For more information, see Tag restrictions in the Service Quotas User Guide.
HTTP Status Code: 400
See Also
For more information about using this API in one of the language-specific AWS SDKs, see the following:
• AWS Command Line Interface
• AWS SDK for .NET
• AWS SDK for C++
• AWS SDK for Go
• AWS SDK for Java V2
• AWS SDK for JavaScript
• AWS SDK for PHP V3
• AWS SDK for Python
• AWS SDK for Ruby V3
UntagResource
UntagResource
Removes tags from the specified applied quota. You can specify one or more tags to remove.
Request Syntax
{
"ResourceARN": "string", "TagKeys": [ "string" ] }
Request Parameters
For information about the parameters that are common to all actions, see Common Parameters (p. 66).
The request accepts the following data in JSON format.
ResourceARN (p. 51)
The Amazon Resource Name (ARN) for the applied quota that you want to untag. You can get this information by using the Service Quotas console, or by listing the quotas using the list-service- quotas AWS CLI command or the ListServiceQuotas AWS API operation.
Type: String
Length Constraints: Minimum length of 1. Maximum length of 1011.
Pattern: arn:aws(-[\w]+)*:*:.+:[0-9]{12}:.+
Required: Yes TagKeys (p. 51)
The keys of the tags that you want to remove from the resource.
Type: Array of strings
Length Constraints: Minimum length of 1. Maximum length of 128.
Pattern: ^([\p{L}\p{Z}\p{N}_.:/=+\-@]*)$
Required: Yes
Response Elements
If the action is successful, the service sends back an HTTP 200 response with an empty HTTP body.
Errors
For information about the errors that are common to all actions, see Common Errors (p. 68).
AccessDeniedException
You do not have sufficient permission to perform this action.
