1. N. Q. Minh, T. Takahashi, “Science and technology of ceramic fuel cell.” Elsevier Science B.
V. 11, 92~96 (1995).
2. K. Eguchi, “Ceramic materials containing rare earth oxides for solid oxide fuel cell”, J.
Alloys. Compds., 250, 486-491 (1997).
3. H. Kaneko, F. Jin and H. Taimarsu, “Electrical conductivity of zirconia stabilized with scandia and yttria,” J. Am. Ceram. Soc., 76 [3] 793-795 (1993).
4. H. Yamamura, N. Utsunomiya, T. Mori, T. Atake, “Electrical conductivity in the system ZrO2-Y2O3-Sc2O3,” Solid State Ionics., 107 185-189 (1998).
5. H. Naito, H. Yugami, H. Arashi, “Electrical properties of ZrO2-In2O3-Y2O3 and its application to a membrane for gas separation,” Solid State Ionics., 90 173-176 (1996).
6. A. Tsoga, A. Naoumidis, W. Jungen and D. StÖver, “Processing and characterisation of fine crystalline ceria gadolinia – yttria stabilized zirconia powders,” J. Europ. Ceram. Soc., 19 907-912 (1999).
7. C. H. Lee and G. M. Choi, “Electrical conductivity of CeO2-doped YSZ,” Solid State Ionics, 135 653-661 (2000).
8. F. C. Fonseca, R. Muccillo, “Impedance spectroscopy of (yttria-stabilized zirconia)-magnesia ceramic composites,” Solid State Ionics., 131 301-309 (2000).
9. Y. Li, J. Gong, Y. Xie, Z. Tang and Z. Zhang, “Low-temperature ionic conductivity of the solid solution in the system ZrO2-Y2O3-Yb2O3,” Mater. sci. eng., B92 287-290 (2002).
10. J. H. Lee, S. M. Yoon, B. K. Kim, H. W. Lee and H. S. Song, “Electrical conductivity and defect structure of yttria-doped ceria-stabilized zirconia,” Solid State Ionics., 144 175-184 (2001).
11. J. Kimpton, T. H. Randle and J. Drennan, “Investigation of electrical conductivity as a function of dopant-ion radius in the system Zr0.75Ce0.08M0.17O1.92 (M=Nd, Sm, Gd, Dy, Ho, Y, Er, Yb, Sc),” Solid State Ionics., 149 89-98 (2002).
12. M. M. Bućko, “Ionic conductivity of CaO-Y2O3-ZrO2 materials with constant oxygen vacancy concentration,” J. Europ. Ceram. Soc., 24 1305-1308 (2004).
13. Y. Shiratori, F. Tietz, H. J. Penkalla, J. Q. He, Y. Shiratori, D. StÖver, “Influence of composites in the system (3YSZ)1-X-(MgO)X,” J. Power Sources., 148 (2005) 32-42.
14. E. Ponthieu, European fuel cell research, “development and Demonstrations : Future programmers and aims”, J. Power Sources, 72, 244 (1998).
15.
www.netl.doe.gov/seca/ (2006)
16. S. Adler, Solid oxide fuel cells, Course Notes, “Department of Chemical Engineering”, University of Washington, (2003).
17. J. W. Yan, Z. G. Lu, Y. Jiang, Y. L. Dong, C. Y. Yu, W. Z. Li, “Fabrication and testing of a doped lanthanum gallate electrolyte thin film solid oxide fuel cell”, J. Electrochem. Soc. 149 (9) A1132–A1135 (2002) .
18. K. Ukai, Y. Mizutani, Y. Kume, “Current status of SOFC development using scandia
doped Zirconia”, SOFC VII 375 (2001).
19. O. Marina, C. Bagger, S. Primdahl, M. Mogensen, “A solid oxide fuel cell with a gadolinia-doped ceria anode: preparation and performance”, Solid State Ionics. 123, 199–208 (1999)
20. M. Joerger, L. Gauckler, “Catalytically active anodes for SOFC”, SOFC VII, 662 (2001).
21. S. Livermore, J. Cotton, M. Ormerod, “Fuel reforming and electrical performance studies in intermediate temperature ceria-gadoliniabased SOFCs”, J. Power Sources 86 (2000) 411–416.
22. E. Batawi, Sulzer Hexis, (2003).
23. N. Kiratzis, P. Holtappels, C.E. Hartwell, M. Morgensen, J. T. S. Irvine, “Preparation and characterization of copper/yittria tatania zirconia cermets for use as possible solid oxide fuel cell anodes”, Fuel Cells 1, 211–218. (2001)
24. C. Lu, W. L. Worrell, R. J. Gorte, J. M. Vohs, “SOFCs for direct oxidation of hydrocarbon fuels with samaria-doped ceria electrolyte,” J. Electrochem. Soc. 150 A354–A358 (2003).
25. O. A. Marina, S. Primdahl, C. Bagger, M. Mogensen, “Ceria-based anodes on a YSZ electrolyte: preparation and electrochemical performance,” SOFC V 540 (1997).
26. M. Mori, T. Yamamoto, M. Mori, T. Horita, N. Sakai, H. Yokokawa, M. Dokiya, Evaluation of Ni and Ti-doped Y2O3 stabilized ZrO2 cermet as an anode in high-temperature solid oxide fuel cells”, Solid State Ion. 160, 1–14 (2003)
27. J. M. Ralph, J. A. Kilner, B. C. H. Steele,” Improving Gd-doped ceria electrolytes for low temperature solid oxide fuel cells”, Mater. Res. Soc. Symp. Proc. 575, 309 (2001).
28. N. T. Hart, N. P. Brandon, M. J. Day, N. Lapena-Rey, “Functionally graded composite cathodes for solid oxide fuel cells”, J. Power Sources, 106, 42–50 (2002).
29. E. P. Murray, S. A. Barnett, “Improved performance in (La, Sr)MnO3 and (La, Sr)(Co, Fe)O3
cathodes by the addition of a Gd-doped ceria second phase”, SOFC VI , 369 (1999).
30. M. Krumpelt, J. Ralph, T. Cruse, Argonne activity overview,in: SECA Core Technology Review, SECA, Sacramento, CA, 2003.
31. S. Visco, C. Jacobson, L. De Jonghe, Thin-film Fuel Cells,Lawrence Berkeley National Laboratory, 1997.
32. O. Yamamoto, “Solid oxide fuel cells: fundamental aspects and prospects”, Electrochim.
Acta 45, 2423–2435 (2000).
33. S. Wang, T. Kato, S. Nagata, T. Honda, T. Kaneko, N. Iwashita, M. Dokiya, “Performance of a La0.6Sr0.4Co0.8Fe0.2O3– Ce0.8Gd0.2O1.9–Ag cathode for ceria electrolyte SOFCs”, Solid State Ionics. 146, 203–210 (2002).
34. Y. Takeda, H. Ueno, N. Imanishi, O. Yamamoto, N. Sammes, M.B.Phillipps,
“Gd1−xSrxCoO3 for the electrode of a solid oxide fuelcells,” Solid State Ionics. 86–88, 1187–1190 (1996).
35. H. Sung Yoon, D. Lee, B. Ho Kim, “Synthesis and characterization of Gd1−xSrxMnO3
cathode for SOFC,” SOFC VI, 493 (1999).
36. Z. Yang, J. Stevenson, P. Singh, Solid oxide fuel cells, Adv. Mater.Process. 161 (6) 34–37 (2003).
37. S.P.S. Badwal, “Stability of solid oxide fuel cell components”, Solid State Ionics. 14339–46 (2001).
38. W.Z. Zhu, S.C. Deevi,” Opportunity of metallic interconnects for solid oxide fuel cells: a status on contact resistance”, Mater. Res.Bull. 38 957–972 (2003).
39. S.C. Sinhal, “Solid oxide fuel cells for stationary, mobile, and military applications”, Solid State Ionics. 152–153, 405–410 (2002).
40. R. P. Ingel, D. Lewis, B. A. Bender, and R. W. Rice, “Physical, microstructural, and thermomechanical properties of ZrO2 single crystals”, pp.408-14 in Advances in ceramics, Vol. 12, Science and technology of Zirconia II. Edited by N. Claussen, M. Ruhle, and A. H.
Heuer. American ceramic society, Clumbus, OH, (1984).
41. R. P. Ingel, D. Lewis, B. A. Bender, and R. W. Rice, “Temperature dependence of strength and fracture toughness of ZrO2 single crystals”, J. Am. Ceram. Soc., 65 [9], C-150-C-152 (1982).
42. D. Michel, L. Mazerolles, and M. Perez y Jorba, “Fracture of metastable tetragonal zirconia crystals”, J. Mater. Sci., 18, 2618-28, (1983).
43. 許崴棋，”異價離子共摻雜對氧化鋯與氧化鈰之晶體結構與導電性質之影響”，台灣科 技大學材料科技研究所碩士論文，民國94 年 6 月。
44. J. F. Baumard and P. Abelard, “In Science and Technology of Zirconia II”, N. Claussen, M.
Rühle, and A. H. Heuer (eds.), American Ceramic Society, Columbus, OH , 555 (1984).
45. Y. Suzuki and T. Takahashi, J. Chem. Soc. Jpn, 1610 (1997).
46. N. H. Anderson, K. Claussen, M. A. Hackett, W. Hayes, M. T. Hutchings, J. E. Macdonald, and R. Osborn, “In Transport-Structure Relations in Fast Ion and Mixed Conductor,” F. W.
Poulsen, N. H. Anderson, K. Clausen, S. Skaarup, and O. T. Sørensen (eds.), Risø National Laboratory, Roskilde, Denmark, p. 279 (1985).
47. A. Nakamura and J. B. Wagner, Jr., ” Defect Structure, Ionic Conductivity, and Diffusion in Yttria Stabilized Zirconia and Related Oxide Electrolytes with Fluorite Structure ,” J.
Electrochem. Soc., 133 , 1542-48 (1986).
48. Y. Suzuki and K. Sugiyama, J. Ceram. Soc. Jpn. Intl. Ed., 95, 480 (1987).
49. E. C. Subbarao, in Science and Technology of Zirconia II, N. Claussen, M. Rühle, and A. H.
Heuer (eds.), American Ceramic Society, Columbus, OH, p. 1 (1981).
50. J. H. Park and R. N. Blumenthal, “, Electronic Transport in 8 Mole Percent Y2O3-ZrO2” J.
Electrochem. Soc., 136 2867 (1989).
51. W. Weppner. In Proceedings of the International Symposium on solid Oxide Fuel Cells.
November 13~14, 1989, Nagoya, Japan, Yamamto O, Dokiya M, Tagawa H eds. Science House, Tokyo, Japan, 1989:83
52. W. Weppner, H. Schuber. Science and Technology of Zirconia
.Somiya S,Yamamoto N, Yanagda H(eds).American Ceramic Society, Westerville, OH,
Ⅲ
1988:837.
53. Pimenov, J. Ullrich, P. Lunkenheimer et al. “Enhanced specific grain
boundary conductivity in nanocrystalline Y2O3-stabilized zirconia”. Solid State Ionics, 108, 111~118 (1998).
54. R. Ramamoorthy, D. Sundararaman, S. Ramasamy. “Ionic conductivit studies of ltrafine-
grained yttria stabilixed zirconia polymorphs.”Solid State Ionics, 123, 271-278 (1999).
55. P. Mondal, A. Klien, W. Jaegermann, H. Hahn.”Ionic conductivity and relaxation in ZrO2-Y2O3 solid solutions.” Solid State Ionics ,118:331-339 (1999).
56. G. Dotelli, R. Volpe, Natali-Sora et al.”IⅠ mpedance apectra simulation of yttria-stabilized zirconia/alumina composites,”Solid State Ionics, 113~115:277-283 (1998).
57. F. Ishizaki, T. Yoshida, S. Sakurada.In :Proceedings of the International Symposium on Solid Oxide Fuel Cell.November 13-14, 1989, Nagoya, Japan, O. Yamamoto, M. Dokiya, and H.
Tagawa(eds). Science House : Tokyo, Japan, 172~176 (1998).
58. F. J. Esper, K. H. Friese, H. Geier. In Science and Technology of Zirconia .Clausen N, Ⅱ Ruhle M, Heuer A H eds.American Ceramic Society:Columbus, OH, P528 (1984).
59. Yuzaki, A. Kishimoto, Y. Nakamura.”Effect of alumina-dispersion on ionic conduction of toughened zirconia base composite.” Solid State Ionica, 116, 47-51 (1999).
60. Y. Ji, J. Liu, Z. Lu et. ”Study on the properties of Al2O3-doped (ZrO2)0.92(Y2O3)0.08
electrolyte.”, Solid State Ionics, 126, 277-283 (1999).
61. A. J. Feighery, J. T. S. “Irvine.Effect of alumina addition upon electrical properties of 8mole% yttria-stabilized zirconia.” Solid State Ionics, 121:209-216 (1999).
62. J. F. Baumard and P. Abelard. In Science and Technology of Zirconia Ⅱ.Clausen N, Ruhle M, Heuer A H eds. American Ceramic Society, Columbus, OH, P555 (1984).
63. M. Yashima, M. Kakihana, M. Yoshimura. ”Metastable-stable phase diagrams in the Zirconia-containing systems utilized in solid-oxide fuel cell application.” Solid State Ionics, P86~88: 1131-1149 (1996).
64. M. Hirano, S. Watanabe, E. Kato et al.”Fabrication,electrical conductivity and mechanical properties of Sc2O3-doped tetragonal zirconia ceramics.”, Solid State Ionics, 111, P161-169 (1998).
65. Y. Li, Z. Tang, Z. Zhang, and J.Gong,”Electrical conductivity of zirconia stabilized with yttria and calcia.”J.Mat.Sci.Lett.,6,443-444,(1999).
66. H. Yamamura, N. Utsunomiya, T. Mori, T. Atake. ”Electrical conductivity in the system ZrO2-Y2O3-Sc2O3.”, Solid State Ionics, 107, 185-189 (1998).
67. S.P.S. Badwal,F.T. Ciacchi,S.Rajendran et al. ”An investigation of conductivity, microstructure and stability of electrolyte composisions in the system 9%(Sc2O3-Y2O3)-ZrO2(Al2O3)”. Solid State Ionics,1998, 109, 167~186.
68. O. Yamamoto. Y. Takeda, N. Imanishi. T. Kawahara, G. Q. Shen, M. Mori. and T. Abe,
“Electrical and Mechanical Properties of Zirconia-Alumina Composite Electrolyte”, 437-44 (1993).
69. W. Weppner, “Tetragonal Zirconia for Solid Oxide Fuel Cells”: p. 83-89 in proceeding of the international Symposium on Solid Oxide Fuel Cells. Edited by O. Yamamoto. M. Dokiya, and H. Tagawa. Science House. Tokyo, Japan (1990).
70. T. Yoshida, T. Hoshina, I. Mukaizawa. and S. Sakurada. “Properties of Partially Stabilized Zirconia Fuel Cell.” J. Electrochem. Soc., 136, 2604-606 (1989).
71. O. Yamamoto. Y. Takeda. R. Kanno. and K. Kohno, “Electrical Conductivity of' Tetragonal Stabilized Zirconia.” J. Mater. Sci., 25, 2805-808 (1990).
72. T. Sato and M. Shimada. “Crystalline Phase Changes in Yttria-Partially-stabilized Zirconia by Low-Temperature Annealing.” J. Am. Ceram. Soc., 67 [10], C-212-C-213 (1984).
73. E. C. Subbarao and H. S. Maiti. “Oxygen Sensors and Pumps,” J. Am. Ceram. Soc., 731-47 (1988).
74. M. Hirano, S. Watanabe, E. Kato, Y. Mizutani, M. Kawai and Y. Nakamura, “Fabrication, Electrical Conductivity, and Mechanical Properties of Sc2O3-Doped Tetragonal-Zirconia Ceramics,” Solid State Ionics, 111, 161-169 (1998).
75. M. Hirano and E. Kato, “Transformation of Sc2O3-Doped Zirconia Polycrystals by Aging under Hydrothermal Conditions,” J. Mater. Sci., 34, 1309-1405 (1999).
76. M. Hirano, S. Watanabe, F. Kato, Y. Mizutanim, M. Kawai and Y. Nakamura, “High Electrical Conductivity and High Fracture Strength of Sc2O3-Doped Zirconia Ceramics with Submicrometer Crains,” J.Am. Ceram. Soc., 82 [10] 2861-2864 (1999).
77. M. Hirano, M. Inagaki, Y. Mizutani, K. Nomura, M. Kawai and Y. Nakamura, “Improvement of Mechanical and Electrical Properties of Scandia-Doped Zirconia Ceramics by Postsintering with Hot Isostatic Pressing,” J. Am. Ceram. Soc., 83 [10] 2619-2621. (2000).
78. M. Hirano, M. Inagaki, Y. Mizutani, K. Nomura, M. Kawai and Y. Nakamura, “Mechanical and Electrical properties of Scandia-Doped zirconia Ceramics Improved by Postsintering with HIP,” Solid State Ionics, 133, 1-9 (2000).
79. Y. Mizutani, M. Tamura, M. Kawai and O. Yamamamoto, “Development of High-Performance Electrolyte in SOFC,” Solid State Ionics, 72, 271-275 (1994).
80. O. Yamamoto, T. Kawahara, Y. Takeda, N. Imanishi and Y. Sakaki, “Zirconia-Based Oxide Ion Conductors in Solid Oxide Fuel Cells”: pp. 733-741 in Science and Technology of zirconia V. Edited by S. P. S. Badwai, M. J. Bannister, and R. H. Hannink, Technomic, Lancaster, PA, (1993).
81. R. Ruh, H. J. Garrent, R. F. Domagala and V. A. Patel, “The system Zirconia-Scandia,” J.
Am. Ceram. Soc., 60 [9-10] 399-403 (1977).
82. F. K. Moghadam, T. Yamashita, R. Sinclair and D. A. Stevenson, “Transmission Electron Microscopy of Annealed ZrO2 + 8mol% Sc2O3,” J. Am. Ceram. Soc., 66 [3] 213-216 (1983).
83. O. Yamamoto, Y. Arati, Y. Takeda, N. Imanishi, Y. Mizutani, M. Kawai and Y. Nakamura,
“Electrical Conductivity of Stabilized Zirconia with Ytterbia and Scandia,” Solid State Ionics, 79, 137-142 (1995).
84. T. Ishii, T. Iwata, Y. Tajima and A. Yamaji, “Structural Phase Transition and Ion Conductivity in 0.88ZrO2·0.12Sc2O3,” Solid State Ionics, 57, 153-157 (1992).
85. K. Keizer, M. J. Verkerk and A. J. Burggraaf, “Preparation and Properties of New Oxygen Ion Conductors for Use at Low Temperatures,” Energy Ceram., 981-992 (1980).
86. K. Keizer, A. J. Burggraaf and G. De With, “The Effect of Bi2O3 on the Electrical and Mechanical Properties of ZrO2-Y2O3 Ceramics,” J. Mater. Sci., 17, 1095-1102 (1982).
87. M. J. Verker, A. J. A. Winnubst and A. J. Burggraaf, “Effect of Impurities on Sintering and Conductivity of Yttria-Stabilized Zirconia,” J. Mater. Sci., 17, 3113-3122 (1982).
88. A. J. A. Winnubst and A. J. Burggraaf, “Preparation and Electrical Properties of a Monophasic ZrO2-Y2O3-Bi2O3 Solid Electrolyte,” Mater. Res. Bull, 19, 613-619 (1984).
89. M. M. R. Boutz, A. J. A. Winnubst, F. Hartgers and A. J. Burggraaf, “Effect of Additives on Densification and Deformation of Tetragonal Zirconia,” J. Mater. Sci., 29, 5374-5382 (1994).
90. M. Hirano, T. Oda, K. Ukai and Y. Mizutam, “Suppression of Rhombohedral-Phase Appearance and Low-Temperature Sintering of Scandia-Doped Cubic Zirconia,”J. Am.
Ceram. Soc., 85 [5], 1336- 1338.
91. Masanori Hirano, Takayuki Oda, Kenji Ukai and Yasunobu Mizutam, “Effect of Bi2O3
additives in Sc stabilized zirconia electrolyte on stability of crystal phase and electrolyte properties,” Solid State Ionics., 158, 215-223 (2003).
92. S. H. Chan, K. A. Khor, Z. T. Xia, J. Power Sources., 93 130 (2001).
93. K. Hayashi, O. Yamamoto, Y. Nishigaki, H. Minoura, Solid State Ionics., 98, 49 (1997).
94. A. Notomi, N. Hisatome, Proceedings of ITSC’95, Kobe, p. 79 (1997).
95. F. J. Gardner, M. J. Day, N. P. Brandom, M. N. Pashley, M. Cassidy, J. Power Sources., 86, 122 (2000).
96. X. J. Chen, K. A. Khor, S. H. Chan, L. G. Yu, Mater. Sci. Eng., A (2002) in press.
97. I. K. Naik, T. Y. Tien, J. Electrochem. Soc., 126, 562 (1979).
98. H. Yahiro, K. Eguchi, H. Arai, Solid State Ionics., 21, 37 (1986).
99. K. Eguchi, T. Setoguchi, T. Inoue, H. Arai, Solid State Ionics., 52, 165 (1992).
100. D. L. Maricle, T. E. Swarr, S. Karavolis, Solid State Ionics., 52, 173 (1992).
101. A.V. Virkar, J. Electrochem. Soc., 138, 1481 (1991).
102. F. M. B. Marques, L. M. Navarro, Solid State Ionics., 90, 183 (1996).
103. F. M. B. Marques, L. M. Navarro, Solid State Ionics., 100, 29 (1997).
104. T. Tsai, L. Perry, S. Barnett, J. Electrochem. Soc., 144[5], 35 (1997).
105. P. Soral, U. Pal, W.L. Worrell, J. Electrochem. Soc., 145[1] 99 (1998).
106. Y. Mishima, H. Mitsuyasu, M. Ohtaki, K. Eguchi, J. Electrochem. Soc. 145[3] 1004 (1998).
107. L.B. Pankratz, “Thermodynamic Properties of Elements and Oxides”, U.S. Bur. of Mines, Bull. B, p. 672 (1983).
108. H. Yahiro, Y. Baba, K. Eguchi, H. Arai, U.S. Bur. Mines, Bull. B 135, 2077 (1988).
109. H. Mitsuyasu, Y. Nonaka, K. Eguchi, H. Arai, J. Solid State Chem., 129, 74 (1997).
110. N. M. Sammes and Z. H. Cai, Solid State Ionics., 100, 39 (1997).
111. G. A. Tompsett and N. M. Sammes, J. Am. Ceram. Soc., 80, 3181 (1997).
112. H. Mitsuyasu, Y. Nonaka, K. Eguchi, Solid State Ionics., 279, 113–115 (1998).
113. N. M. Sammes, G.A. Tompsett, Z. H. Cai, Solid State Ionics., 121, 121 (1999).
114. A. Tsoga, A. Gupta, A. Naoumidis, P. Nikolopoulos, Acta Mater., 48, 4709 (2000).