參考資料 參考資料 參考資料
[1] 行政院經建會人力規劃處，「中華民國臺灣 95 年至 140 年人口推計」，2006 年 7 月。
[2] 曾政光，遠距居家照護之發展現況與趨勢，工業技術研究院 產業經濟與趨勢研究中 心，新竹，2002 年 12 月。
[3] 劉家瑜，「無線網路、RFID、感測器大行其道」，電工資訊，184 期，2006 年 4 月。
[4] 趙蘭英，李希敏，張慈映，黃博偉，董正玫，2006 醫療器材工業年鑑，工業技術研 究院 產業經濟與趨勢研究中心，新竹，2006 年 5 月。
[5] 董正玫，定點照護（Point-of-Care）器材市場潛力分析，工業技術研究院 產業經濟 與趨勢研究中心，新竹，2006 年 10 月。
[6] A. J. Tüdős, G. A. J. Besselink and R. B. M. Schasfoort, “Trends in miniaturized total analysis systems for point-of-care testing in clinical chemistry“, Lab Chip, 1, pp. 83-95, 2001.
[7] P. -A. Auroux, D. Iossifidis, D. R. Reyes, and A. Manz, “Micro total analysis systems. 2.
Analytical standard operations and applications”, Anal. Chem., 74, pp. 2637-2652, 2002.
[8] E. Verpoorte, “Microfluidic chips for clinical and forensic analysis”, Electrophoresis, 23, pp. 677–712, 2002.
[9] T. Vo-Dinh, and B. Cullum, “Biosensors and biochips: advances in biological and medical diagnostics”, Fresenius J. of Anal. Chem., 366, pp. 540-551, 2000.
[10] P. Gravesen, J. Branebjerg, and O. S. Jensen, “Microfluidics-a review”, J. Micromech.
Microeng., 3, pp. 168-182, 1993.
[11] S. C. Terry, J. H. Jerman, and J. B. Angell, “A gas chromatographic air analyzer fabricated on a silicon wafer”, IEEE Trans. Electron. Devices, ED-26, pp.1880-1886, 1979.
[12] E. Bassous, H. H. Taub, and L. Kuhn, “Ink jet printing nozzle arrays etched in silicon”, Appl. Phys. Lett., 31, 135-137, 1977.
[13] A. Rasmussen, M. Gaitan, L. E. Locascio, and M. E. Zaghloul, “Fabrication techniques to realize CMOS-compatible microfluidic microchannels”, J. Microelectromech. Syst., 10, pp.
286-297, 2001.
[14] D. J. Laser, and J. G. Santiago, “A review of micropumps”, J. Micromech. Microeng., 14, pp. R35–64, 2004.
[15] K. W. Oh, and C. H. Ahn, “A review of microvalves”, J. Micromech. Microeng., 16, pp.
R13–39, 2006.
[16] N. -T. Nguyen, and Z. Wu, “Micromixers-a review”, J. Micromech. Microeng., 15, pp.
R1–16, 2005.
[17] D. Erickson, and D. Li, “Integrated microfluidic devices”, Anal. Chim. Acta, 507, pp.
11-26, 2004.
[18] R. H. Liu, J. Yang, R. Lenigk, J. Bonanno, and P. Grodzinski, “Self-contained, fully integrated biochip for sample preparation, polymerase chain reaction amplification, and DNA microarray detection”, Anal. Chem., 76, pp. 1824-1831, 2004.
[19] R. Pal, M. Yang, R. Lin, B. N. Johnson, N. Srivastava, S. Z. Razzacki, K. J. Chomistek, D. C. Heldsinger, R. M. Haque, V. M. Ugaz, P. K. Thwar, Z. Chen, K. Alfano, M. B. Yim, M.
Krishnan, A. O. Fuller, R. G. Larson, D. T. Burke and M. A. Burns, “An integrated microfluidic device for influenza and other genetic analyses”, Lab Chip, 5, pp. 1024-1032, 2005.
[20] Agilent 1200 HPLC-Chip System, http://www.chem.agilent.com/Scripts/PDS.asp?lPage=
38308 (last visited Aug. 23, 2007).
[21] Agilent 2100 Bioanalyzer, http://www.chem.agilent.com/Scripts/PDS.asp?lPage=51 (last visited Aug. 23, 2007).
[22] Agnitio BioICTM, http://www.agnitio.com.tw/bioic.htm (last visited Aug. 23, 2007).
[23] C. K. Fredrickson, and Z. H. Fan, “Macro-to-micro interfaces for microfluidic devices”, Lab Chip, 4, pp. 526-533, 2004.
[24] B. L. Gray, D. Jaeggi, N. J. Mourlas, B. P. van Drieënhuizen, K. R. Williams, N. I. Maluf, G. T. A. Kovacs, “Novel interconnection technologies for integrated microfluidic systems”,
Sens. Actuators A, 77, pp. 57-65, 1999.
[25] Z. Yang, and R. Maeda, “Socket with built-in valves for the interconnection of microfluidic chips to macro constituents”, J. Chromatogr. A, 1013, pp. 29-33, 2003.
[26] LioniX MATAS, http://www.lionixbv.nl/microfluidics/matas.html (last visited Aug. 24, 2007).
[27] thinXXS Construction!Kit, http://www.thinxxs.com/main/produkte/microfluidixxs.html (last visited Aug. 24, 2007).
[28] A. W. Adamson, Physical chemistry of surfaces 5th edition, Wiley-Interscience Publication, New York, 1990.
[29] G. Beni and S. Hackwood, “Electro-wetting displays”, App. Phys. Lett., 38, pp. 207-209, 1981.
[30] R. A. Hayes, and B. J. Feenstra, “Video-speed electronic paper based on electrowetting”, Nature, 425, pp. 383-385, 2003.
[31] S. Kuiper and B. H. W. Hendriks, “Variable-focus liquid lens for miniature cameras”, App. Phys. Lett., 85, pp. 1128-1130, 2004.
[32] J. Lee, and C. -J. Kim, “Surface-tension-driven microactuation based on continuous electrowetting (CEW)”, J. Microelectromech. Syst., 9, pp. 171-180, 2000.
[33] K. -S. Yun, I. -J. Cho, J. -U. Bu, C. -J. Kim, and E. Yoon, “A surface-tension driven micropump for low-voltage and low-power operations”, J. Microelectromech. Syst., 11, pp.
454-461, 2002.
[34] M. G. Pollack, R. B. Fair and A. D. Shenderov, "Electrowetting-based actuation of liquid droplets for microfluidic applications", Appl. Phys. Lett., 77, 2000.
[35] M. G. Pollack, A. D. Shenderov, and R. B. Fair, "Electrowetting-based actuation of droplets for integrated microfluidics", Lab Chip, 2, pp. 96-101, 2002.
[36] S. K. Cho, H. Moon, and C. -J. Kim, “Creating, Transporting, Cutting, and Merging Liquid Droplets by Electrowetting-Based Actuation for Digital Microfluidic Circuits”, J.
Microelectromech. Syst., 12, 70-80, 2003.
[37] S.-K. Fan, P.-P. de Guzman, and C.-J. Kim, “EWOD Driving of Droplet on NxM Grid Using Single-Layer Electrode Patterns”, Tech. Dig., Solid-State Sensor, Actuator, and Microsystems Workshop, pp. 134-137, Hilton Head Island, SC, Jun. 2002.
[38] S. -K. Fan, C. Hashi, and C. -J. Kim, "Manipulation of Multiple Droplets on NxM Grid by Cross-reference EWOD Driving Scheme and Pressure-Contact Packaging", Tech. Dig., IEEE Conf. MEMS, pp. 694-697, Kyoto, Japan, Jan. 2003.
[39] V. Srinivasan, V. K. Pamula and R. B. Fair, “An integrated digital microfluidic lab-on-a-chip for clinical diagnostics on human physiological fluids”, Lab Chip, 4, pp.
310-315, 2004.
[40] L. Minnema, and H. A Barneveld, “An investigation into the mechanism of water treeing in the polyetene high voltage cables”, IEEE Trans. on Elec. Insul., EI-15, 1980.
[41] B. Berge, “Electrocapillarity and wetting of insulator films by water”, Comptes Rendus de l’Academie des Sciences Serie II, 317, pp. 157-163, 1993.
[42] M. Vallet, B. Berge, and L. Vovelle, “Electrowetting of water and aqueous solutions on poly (ethylene terephthalate) insulating films”, Polymer, 37, pp. 2456-2470, 1996.
[43] W. J. J. Welters, and L. G. J. Fokkink, “Fast electrically switchable capillary effects”, Langmuir, 14, pp.1535-1538, 1998.
[44] H. J. J. Verheijen, and M. W. J. Prins, “Contact angles and wetting velocity measured electrically”, Rev. Sci. Instrum., 70, pp. 3668-3673, 1999.
[45] E. Seyrat, and R. A. Hayes, “Amorphous fluoropolymers as insulators for reversible low-voltage electrowetting”, J. Appl. Phys., 90, pp.1383-1386, 2001.
[46] Y. W. Chang, and D. Y. Kwok, “Electrowetting on dielectric: a low voltage study on self-assembled monolayers and its wetting kinetics”, Proc., Int. Conf. on MEMS, NANO, and Smart Sys., pp. 66-71, Banff, Alberta, Canada, Aug. 2004.
[47] Parylene, http://en.wikipedia.org/wiki/Parylene (last visited Aug. 25, 2007).
[48] S. K. Cho, S. K. Fan, H. Moon, and C. J. Kim, “Toward digital microfluidic circuits:
creating, transporting, cutting and merging liquid droplets by electrowetting-based actuation”, Tech. Dig., IEEE Conf. MEMS, pp. 32-52, Las Vegas, NV, Jan. 2002.
[49] U. -C. Yi and C. -J. Kim, “Characterization of electrowetting actuation on addressable single-side coplanar electrodes”, J. Micromech. Microeng., 16, pp. 2053-2059, 2006.
[50] D. Chatterjee, B. Hetayothin, A. R. Wheeler, D. J. King and R. L. Garrell, ”Droplet-based microfluidics with nonaqueous solvents and solutions”, Lab Chip, 6, pp. 199-206, 2006.
[51] H. Yang, S. -K. Fan, C. -P. Lin, C. T. Wu, and W. Hsu, “3D droplet transportation by EWOD actuations on flexible polymer films”, Proc., ASME IMECE 2005, IMECE2005-80744, Orlando, Florida, USA, Nov. 2005.
[52] M. Abdelgawad, and A. R. Wheeler, “3D droplet actuation in digital microfluidics devices”, Tech. Dig., IEEE TRANSDUCERS’07, pp. 1809-1812, Lyon, France, Jun. 2007.
[53] H. Moon, S. K. Cho, R. L. Garrell, and C. -J. Kim, “Low voltage electrowetting-on- dielectric”, J. Appl. Phys., 92, pp. 4080-4087, 2002.
[54] 丁志明等，微機電系統技術與應用，行政院國家科學委員會 精密儀器發展中心，
新竹，2003 年 7 月。
[55] 莊達人，VLSI 製造技術，高立圖書，台北，2005 年 8 月。
[56] Parylene Properties & Characteristics, http://www.vp-scientific.com/parylene_properties .htm (last visited Aug. 26, 2007).
[57] J. T. C. Yeh and K. R. Grebe, “Patterning of poly-para-xylylenes by reactive ion etching”, J. Vac. Sci. Technol. A, 1, pp. 604-608, 1983.
[58] Technical Information, http://www.hdmicrosystems.com/tech/techinfo.html (last visited Aug. 26, 2007).
[59] SU-8: Thick Photo-Resist for MEMS, http://memscyclopedia.org/su8.html (last visited Aug. 26, 2007).
[60] C. -H. Lin, G. -B. Lee, B. -W. Chang, and G. -L. Chang, “A new fabrication process for
ultra-thick microfluidic microstructures utilizing SU-8 photoresist”, J. Micromech. Microeng., 12, pp. 590-597, 2002.
[61] C. -J. Lin, and F. -G. Tseng, “A micro Fabry–Perot sensor for nano-lateral displacement sensing with enhanced sensitivity and pressure resistance”, Sens. Actuators A, 114, pp.
163-170, 2004.
[62] N. Chronis, and L. P. Lee, “Electrothermally Activated SU-8 Microgripper for Single Cell Manipulation in Solution”, J. Microelectromech. Syst., 14, pp. 857-863, 2005.
[63] H. Sato, H. Matsumura, S. Keino, and S. Shoji, “An all SU-8 microfluidic chip with built-in 3D fine microstructures”, J. Micromech. Microeng., 16, pp. 2318-2322, 2006.
[64] B. E. Poling, J. M. Prausnitz, and J. P. O’Connell, The properties of gases and liquids 5th edition, McGraw-Hill, New York, USA, May 1, 2001.
[65] Isopropyl alcohol ,http://webbook.nist.gov/cgi/cbook.cgi?Name=IsoPropyl+Alcohol&
Units=SI (last visited Aug. 26, 2007).
[66] 許鎮鵬，徐文祥，「微機電製程中的犧牲層技術之發展現況」，半導體科技，21 期，
2001 年 10 月。
[67] 普城企業股份有限公司，「FHD-5 物質安全資料表」，2003 年 5 月。
[68] 台灣科萊恩股份有限公司，「AZ-4620 物質安全資料表」，2003 年 6 月。
[69] MicroChem Corp.，「SU-8 顯影液物質安全資料表」，2001 年 6 月。
[70] B. M. Henry, A. G. Erlat, A. McGuigan, C. R. M. Grovenor, G. A. D. Briggs, Y.
Tsukahara, T. Miyamoto, N. Noguchi, and T. Niijima, “Characterization of transparent aluminium oxide and indium tin oxide layers on polymer substrates”, Thin Solid Films, 382, pp. 194-201, 2001.
[71] V. P. Carey, Liquid-Vapor Phase-Change Phenomena, Taylor & Francis, Washington, USA, 1992.
[72] E. B. Dussan and R. T.-P. Chow, “On the ability of drops or bubbles to stick to non-horizontal surfaces of solids”, J. Fluid Mech., 137, pp. 1-29, 1983.
[73] K. S. Birdi, Handbook of surface and colloid chemistry, CRC press, New York, 1997.
[74] J. Lee, H. Moon, J. Fowler, T. Schoellhammer, and C. -J. Kim, “Electrowetting and electrowetting-on-dielectric for microscale liquid handling”, Sens. Actuators A, 95, pp.
259-268, 2002.
[75] A. Torkkeli, J. Saarilahti, A. Häärä, H. Härmä, T. Soukka, P. Tolonen, “Electrostatic transportation of water droplets on superhydrophobic surfaces”, Tech. Dig., IEEE Conf.
MEMS, pp. 475-478, Interlaken, Switzerland, Jan. 2001.
[76] A. Torkkeli, “Droplet microfluidics on a planar surface”, Helsinki University of Technology, Dissertation, Oct. 2003.
[77] T. -T. Wang, P. -W. Huang, and S. -K. Fan, “Droplets Oscillation and Continuous Pumping by Asymmetric Electrowetting”, Tech. Dig., IEEE Conf. MEMS, pp. 174-177, Istanbul, Turkey, Jan. 2006.
[78] E. Seyrat, and R. A. Hayes, “Amorphous fluoropolymers as insulators for reversible low-voltage electrowetting”, J. Appl. Phys., 90, pp. 1383-1386, 2001.
[79] A. Quinn, R. Sedev, and J. Ralston, “Influence of the electrical double layer in electrowetting”, J. Phys. Chem. B, 107, pp. 1163-1169, 2003.
[80] J. M. Shaw, J. D. Gelorme, N. C. LaBianca, W. E. Conley and S. J. Holmes, “Negative photoresists for optical lithography”, IBM J. Res. Dev., 41, pp. 81-94, 1997.
[81] L. J. Guerin, “The SU8 homepage”, http://www.geocities.com/guerinlj/ (last visited Sep.
3, 2007).
[82] S. Wolf, and R. N. Tauber, Silicon processing for the VLSI era, volume 1: Process Technology, Lattice Press, California, 2000.
[83] T. Sikanen, S. Tuomikoski, R. A. Ketola, R. Kostiainen, S. Franssila and T. Kotiaho,
“Characterization of SU-8 for electrokinetic microfluidic applications”, Lab Chip, 5, pp.
888-896, 2005.
[84] E. Igata, M. Arundell, H. Morgan, and J. M. Cooper, “Interconnected reversible
lab-on-a-chip technology”, Lab Chip, 2, pp. 65-69, 2002.
[85] T. Fujii, Y. Sando, K. Higashino and Y. Fujii, “A plug and play microfluidic device”, Lab Chip, 3, pp. 193-197, 2003.
[86] V. Saarela, S. Franssila, S. Tuomikoski, S. Marttila, P. Östman, T. Sikanen, T. Kotiaho and R. Kostiainen, “Re-usable multi-inlet PDMS fluidic connector”, Sens. Actuators B, 114, pp. 552-557, 2006.
[87] K. -H. Han, R. D. McConnell, C. J. Easley, J. M. Bienvenue, J. P. Ferrance, J. P. Landers and A. B. Frazier, “An active microfluidic system packaging technology”, Sens. Actuators B, 122, pp. 337-346, 2007.
[88] V. Nittis, R. Fortt, C. H. Legge, and A. J. de Mello, “A high-pressure interconnect for chemical microsystem applications”, Lab Chip, 1, pp. 148-152, 2001.
[89]台灣電路板協會，電路板機械加工技術，台灣電路板協會，桃園，2004 年 3 月。
[90]台灣電路板協會，高密度印刷電路板技術，台灣電路板協會，桃園，2004 年 7 月。
[91]林振華，林振富，高密度軟性電路板入門，全華科技圖書，台北，2000 年 12 月。