建議：

1. 將現有模擬結果應用於實驗以探討最佳電池性能 2. 將溫度變化納入考量以探討熱管理問題

3. 將現有小尺寸(2.3cm x 2.3 cm)的電池擴展到大尺寸(10cm x 10cm) 的電池

參考文獻

1. BP Statistical Review of World Energy 2007 [cited 2007;

Available from:

http://www.bp.com/multipleimagesection.do?categoryId=9017892

&contentId=7033503.

2. Weber A. Z., Darling R. M., and Newman J., “Modeling two-phase behavior in PEFCs,” Journal of the Electrochemical Society. Vol.

151, No. 10, pp. A1715-A1727, 2004.

3. Marr C. and Li X., “Composition and performance modelling of catalyst layer in a proton exchange membrane fuel cell,” Journal of Power Sources. Vol. 77, No. 1, pp. 17-27, 1999.

4. Baschuk J. J. and Li X., “Modelling of polymer electrolyte membrane fuel cells with variable degrees of water flooding,”

Journal of Power Sources. Vol. 86, No. 1-2, pp. 181-196, 2000.

5. Bernardi D. M. and Verbrugge M. W., “Mathematical-Model of a Gas-Diffusion Electrode Bonded to a Polymer Electrolyte,” AIChE Journal. Vol. 37, No. 8, pp. 1151-1163, 1991.

6. Bernardi D. M. and Verbrugge M. W., “A Mathematical-Model of the Solid-Polymer-Electrolyte Fuel-Cell,” Journal of the

Electrochemical Society. Vol. 139, No. 9, pp. 2477-2491, 1992.

7. Springer T. E., Zawodzinski T. A., and Gottesfeld S., “Polymer Electrolyte Fuel-Cell Model,” Journal of the Electrochemical Society. Vol. 138, No. 8, pp. 2334-2342, 1991.

8. Fuller T. F. and Newman J., “Water and Thermal Management in Solid-Polymer-Electrolyte Fuel Cells,” Journal of The

Electrochemical Society. Vol. 140, No. 5, pp. 1218-1225, 1993.

9. Gurau V., Liu H. T., and Kakac S., “Two-dimensional model for proton exchange membrane fuel cells,” AIChE Journal. Vol. 44, No.

11, pp. 2410-2422, 1998.

10. You L. and Liu H., “A two-phase flow and transport model for the cathode of PEM fuel cells,” International Journal of Heat and Mass Transfer. Vol. 45, No. 11, pp. 2277-2287, 2002.

11. Chen F., Wen Y.-Z., Chu H.-S., Yan W.-M., and Soong C.-Y.,

“Convenient two-dimensional model for design of fuel channels for proton exchange membrane fuel cells,” Journal of Power Sources.

Vol. 128, No. 2, pp. 125-134, 2004.

12. Shimpalee S. and Dutta S., “Numerical prediction of temperature distribution in PEM fuel cells,” Numerical Heat Transfer Part a-Applications. Vol. 38, No. 2, pp. 111-128, 2000.

13. Lee W. K., Shimpalee S., and Van Zee J. W., “Verifying predictions of water and current distributions in a serpentine flow field

polymer electrolyte membrane fuel cell,” Journal of the

Electrochemical Society. Vol. 150, No. 3, pp. A341-A348, 2003.

14. Natarajan D. and Van Nguyen T., “Three-dimensional effects of liquid water flooding in the cathode of a PEM fuel cell,” Journal of Power Sources. Vol. 115, No. 1, pp. 66-80, 2003.

the cathode of PEM fuel cells using interdigitated flow fields,”

AIChE Journal. Vol. 46, No. 10, pp. 2053-2064, 2000.

16. Wang Z. H., Wang C. Y., and Chen K. S., “Two-phase flow and transport in the air cathode of proton exchange membrane fuel cells,” Journal of Power Sources. Vol. 94, No. 1, pp. 40-50, 2001.

17. Yi J. S. and Van Nguyen T., “Multicomponent transport in porous electrodes of proton exchange membrane fuel cells using the interdigitated gas distributors,” Journal of the Electrochemical Society. Vol. 146, No. 1, pp. 38-45, 1999.

18. Um S. and Wang C. Y., “Three-dimensional analysis of transport and electrochemical reactions in polymer electrolyte fuel cells,”

Journal of Power Sources. Vol. 125, No. 1, pp. 40-51, 2004.

19. Hu G., Fan J., Chen S., Liu Y., and Cen K., “Three-dimensional numerical analysis of proton exchange membrane fuel cells (PEMFCs) with conventional and interdigitated flow fields,”

Journal of Power Sources. Vol. 136, No. 1, pp. 1-9, 2004.

20. Um S., Wang C. Y., and Chen C. S., “Computational fluid dynamics modeling of proton exchange membrane fuel cells,”

Journal of the Electrochemical Society. Vol. 147, No. 12, pp.

4485-4493, 2000.

21. Berning T., Lu D. M., and Djilali N., “Three-dimensional computational analysis of transport phenomena in a PEM fuel cell,” Journal of Power Sources. Vol. 106, No. 1-2, pp. 284-294, 2002.

22. Mazumder S. and Cole J. V., “Rigorous 3-d mathematical modeling of PEM fuel cells - I. Model predictions without liquid water

transport,” Journal of the Electrochemical Society. Vol. 150, No. 11, pp. A1503-A1509, 2003.

23. Mazumder S. and Cole J. V., “Rigorous 3-d mathematical modeling of PEM fuel cells - II. Model predictions with liquid water

transport,” Journal of the Electrochemical Society. Vol. 150, No. 11, pp. A1510-A1517, 2003.

24. Yan W. M., Soong C. Y., Chen F., and Chu H. S., “Effects of flow distributor geometry and diffusion layer porosity on reactant gas transport and performance of proton exchange membrane fuel cells,” Journal of Power Sources. Vol. 125, No. 1, pp. 27-39, 2004.

25. Siegel N. P., Ellis M. W., Nelson D. J., and von Spakovsky M. R.,

“A two-dimensional computational model of a PEMFC with liquid water transport,” Journal of Power Sources. Vol. 128, No. 2, pp.

173-184, 2004.

26. Oosthuizen P. H., Sun L., and McAuley K. B., “The effect of channel-to-channel gas crossover on the pressure and temperature distribution in PEM fuel cell flow plates,” Applied Thermal

Engineering. Vol. 25, No. 7, pp. 1083-1096, 2005.

27. Shimpalee S., Greenway S., and Van Zee J. W., “The impact of channel path length on PEMFC flow-field design,” Journal of Power Sources. Vol. 160, No. 1, pp. 398-406, 2006.

28. Sun L., Oosthuizen P. H., and McAuley K. B., “A numerical study

of channel-to-channel flow cross-over through the gas diffusion layer in a PEM-fuel-cell flow system using a serpentine channel with a trapezoidal cross-sectional shape,” International Journal of Thermal Sciences. Vol. 45, No. 10, pp. 1021-1026, 2006.

29. Shimpalee S. and Van Zee J. W., “Numerical studies on rib &

channel dimension of flow-field on PEMFC performance,”

International Journal of Hydrogen Energy. Vol. In Press, Corrected Proof, No.

30. Kanezaki T., Li X., and Baschuk J. J., “Cross-leakage flow between adjacent flow channels in PEM fuel cells,” Journal of Power

Sources. Vol. 162, No. 1, pp. 415-425, 2006.

31. Dutta S., Shimpalee S., and Van Zee J. W., “Numerical prediction of mass-exchange between cathode and anode channels in a PEM fuel cell,” International Journal of Heat and Mass Transfer. Vol. 44, No. 11, pp. 2029-2042, 2001.

32. Nguyen P. T., Berning T., and Djilali N., “Computational model of a PEM fuel cell with serpentine gas flow channels,” Journal of Power Sources. Vol. 130, No. 1-2, pp. 149-157, 2004.

33. Park J. and Li X., “An experimental and numerical investigation on the cross flow through gas diffusion layer in a PEM fuel cell with a serpentine flow channel,” Journal of Power Sources. Vol. 163, No.

2, pp. 853-863, 2007.

34. Soong C. Y., Yan W. M., Tseng C. Y., Liu H. C., Chen F., and Chu H. S., “Analysis of reactant gas transport in a PEM fuel cell with

partially blocked fuel flow channels,” Journal of Power Sources.

Vol. 143, No. 1-2, pp. 36-47, 2005.

35. Yan W.-M., Yang C.-H., Soong C.-Y., Chen F., and Mei S.-C.,

“Experimental studies on optimal operating conditions for different flow field designs of PEM fuel cells,” Journal of Power Sources.

Vol. 160, No. 1, pp. 284-292, 2006.

36. Yan W.-M., Mei S.-C., Soong C.-Y., Liu Z.-S., and Song D.,

“Experimental study on the performance of PEM fuel cells with interdigitated flow channels,” Journal of Power Sources. Vol. 160, No. 1, pp. 116-122, 2006.

37. Soong C. Y., Yan W. M., Tseng C. Y., Liu H. C., Chen F. L., and Chu H. S., “Analysis of reactant gas transport in a PEM fuel cell with partially blocked fuel flow channels,” Journal of Power Sources. Vol. 143, No. 1-2, pp. 36-47, 2005.

38. Wang C. Y. and Cheng P., “A multiphase mixture model for

multiphase, multicomponent transport in capillary porous media .1.

Model development,” International Journal of Heat and Mass Transfer. Vol. 39, No. 17, pp. 3607-3618, 1996.

39. Dullien F. A. L., Porous media, New York, 1991.