第五章 結論與建議
第二節 建議
本計畫乃研究全尺寸輕質 RC 梁的構件行為，可瞭解此大型構件的撓曲、
剪力與尺寸效應等性能，以供相關規範研訂之參考，因此需要有更完整的全尺 寸構件實驗資訊。以下建議兩項適合繼續研究的課題：
1. 改變製作構件的材料參數，如輕質混凝土抗壓強度、全輕質混凝土等，及結 構參數，如斷面尺寸、補強鋼筋、短梁等。
梁以外的構件，如柱、版、牆等，也需要個別進行全尺寸構件的行為探討。
參考書目
1. 顏聰，「水庫淤泥之資源化應用－輕質粒料之燒製與量產」，水庫淤泥輕質 粒料混凝土產製及規範研討會論文集，中興大學，台中，2003，pp.3-16。
2. 陳豪吉，「以台灣地區生產之輕質粒料探討輕質混凝土之配比、製作及強 度性質」，博士論文，中興大學土木工程系，1998。
3. 陳豪吉，「以水庫淤泥製造輕質粒料及輕質混凝土之研究」，國科會報告，
2000。
4. 顏聰、黃兆龍、高健章等，「水庫淤泥輕質粒料產製及輕質粒料混凝土應 用與推廣」，內政部建築研究所計畫期末報告，2003。
5. 顏聰，「水庫淤泥輕質粒料之產製及輕質粒料混凝土之產業化應用」，國科 會研究計畫報告，2006。
6. 顏聰，「輕質粒料混凝土之力學性質」，高性能混凝土於結構工程之應用研 討會論文集，台中，2003.12，pp.1-1～1-21。
7. Chandra, S. and Berntsson, L.,「Lightweight aggregate concrete」，Noyes Publications, N. Y. USA, 2002, pp.369-399.
8. 顏聰，「輕質粒料混凝土」，中華輕質粒料協會，2005，第 91～101 頁。
9. Bardhan-Roy, B. K.,「Lightweight aggregate concrete in UK」，International Symposium on structural lightweight aggregate concrete, Sandefjord, Norway, 1995, pp.52-69.
10. Helgesen, K. H.,「Lightweight aggregate concrete in Norway」, International Symposium on structural lightweight aggregate concrete, Sandefjord, Norway, 1995, pp.70-82.
11. Ikeda, S., and Fujiki, E.,「Recent Development in Lightweight Aggregate Concrete in Japan」, Proc. 2nd Int. Symp. Structural Lightweight Aggregate Concrete Kristiansand, Norway, 2000, pp.16-25.
12. McSaveney, L. G.,「The Wellington Stadium, New Zealand’s First Use of High Strength Lightweight Precast Concrete」, Proc. 2nd Int. Symp. Structural Lightweight Aggregate Concrete Kristiansand, Norway, 2000, pp.385-395.
13. Melby, K.,「Use of high-strength LWAC in Norwegian bridges」, Proc. 2nd Int.
Symp. Structural Lightweight Aggregate Concrete Kristiansand, Norway, 2000, pp.47-56.
14. Jakobsen, S. E.,「The use of LWAC in the pontoons of the Nordhordland Floating Bridge, Norway 」 , Proc. 2nd Int. Symp. Structural Lightweight Aggregate Concrete Kristiansand, Norway, 2000, pp.73-78.
15. 吳正一，黃玉麟等，「鋼筋輕質粒料混凝土牆反覆荷重之力學行為」，第三 屆全國輕質粒料混凝土研討會，台中，台灣，2007，pp.171-186。
16. 許協隆，曲天強，「鋼筋輕質粒料混凝土梁構件之結構行為與設計」，土木 水利，第33 卷，第 5 期，2006，pp.82-89。
17. 湯兆緯，顏聰，陳豪吉，「無腹筋輕質粒料混凝土 RC 梁之剪力行為」，中 國土木水利工程學刊，第十九卷，第一期，pp.57-66。
18. Duan, L., Wang, F. M., and Chen, W. F., 「 Flexural Regidity of Reinforced-Concrete Member」, ACI Structural Journal, Vol.86(Iss4), 2003, pp.419-427.
19. Soroushian, P., J. S. Sim, et al, 「 Axial Flexural Behavior of Reinforced-Concrete Sections-Effects of the Design Variable」, ACI Structural Journal, Vol.88(Iss1), 1991, pp.17-21.
20. Bosco, C., A. Carpinteri and P. G. Debernardi, ‘Minimum Reinforcement in High-Strength Concrete,’ Journal of Structural Engineering, Vol. 116, No. 2, February, 1990.
21. Kotsovos, M. D.,「Shear Failure of Reinforced-Concrete Beams」, Engineering Structures vol.9(Iss 1), 1987, pp.32-38.
22. Chana, P. S.,「Analytical and Experimental Studies of Shear Failures in Reinforced-Concrete Beams」, Proceedings of the Institution of Civil Engineers Part 2-Research and Theory Vol.85(Iss DEC), 1988, pp.609-628.
23. Lee, J. Y. and F. Watanabe,「Shear Design of Reinforced-Concrete Beams with Shear Reinforcement Considering Failure Modes」, ACI Structural Journal Vol.97(Iss 3) , 2000, pp.477-484.
24. Gastebled, O. J. and I. M. May,「Fracture-Mechanics Model Applied to Shear Failure of Reinforced-Concrete Beams Without Stirrups」, ACI Structural
Journal Vol.98(Iss 2) , 2001, pp.184-190.
25. 張英宜，黃世建，「鋼筋混凝土梁位移之預測」，中國土木水利工程學刊，
第七卷，第二期，1995，pp.171-181。
26. Bazant, Z. P. and J. Planas, Fracture and Size Effect in Concrete and Other Quasibrittle Materials, CRC Press LLC, pg.349-365, 1998.
27. Ahmad, S. H. and R. Barker,「Flexural Behavior of Reinforced High-strength Lightweight Concrete Beams」, ACI Structural Journal, NO.88, 1991.
28. Ahmad, S. H. and J. Batts, 「 Flexural Behavior of Doubly Reinforced High-strength Lightweight Concrete Beams With Web Reinforcement」, ACI Structural Journal, NO.88, 1991.
29. Ahmad, S. H., Y. Xie and T. Yu,「Shear Strength of Reinforced Lightweight Concrete Beams of Normal and High Strength Concrete」, Magazine of Concrete Research, No.166, 1994, pp.57-66.
30. Salandra, M. A. and S. H. Ahmad.,「Shear Capacity of Reinforced Lightweight High-strength Concrete Beams」, ACI Structural Journal, No.86, 1989.
31. A. Short and W. Kinniburgh, “Lightweight Concrete”, Formerly Building Research Establishment, Garston, Watford, U.K. 1976.
32. H.J. Chen, T. Yen, T. P. Lai, and Y. L. Huang, ”Determination of the dividing strength and its relation to the concrete strength in lightweight aggreg Cement
& Concrete Composites, Vol.21, pp.29-37, 1999.
33. How-Ji Chen, Tsong Yen, and Kuan-Hung Chen, “Evaluating Elastic Modulus of Lightweight Aggregate”, ACI Materials Journal, Vol.100, No.2, pp.108-113, 2003.
34. Lin, C. H., and Lee, F. S., “Ductility of High-Performance Concrete Beam with High strength Lateral Reinforcement,” ACI Structural Journal, Vol.98, No.4, PP.1~9, Jul.~Aug. 2001.
35. Pecce, M., and Fabbrocion, G., “Plastic Rotation Capacity of Beam in Normal and High-Performance Concrete,” ACI Structural Journal, pp.290~296, Mar.~Apr. 1999.
36. Fang, I. K., Yen, S. T., Wang, C. S., and Hong, K. L., “Cyclic Behavior of Moderately Deep HSC Beams,” ACI Structural Journal, Vol.119, pp.2573~2592,
Sep.1993.
41. T.C., Zsutty, “Shear Strength Prediction for Separate Categories of Simple Beam Test,” ACI Journal, Proceedings V. 68, No. 2, Feb., pp138-143, 1971.
42. K.S., Rebeiz, “Shear Strength Prediction for Concrete Members,” Journal of Structural Engineering, Vol. 125, No. 3, March, pp. 301-308, 1999.
43. P.D. Zarais, and G..C. Papadakis, “Diagonal shear failure and size effect in RC beams without web reinforcement,” Journal of Structural Engineering, Vol. 127, No. 7, July, pp. 733-742, 2001.
44. G. Russo, G.. Somma, and D. Mitri, “Shear strength analysis and prediction for reinforced concrete beams without shear stirrups,” Journal of Structural Engineering, Vol. 131, No. 1, January, pp. 66-74, 2005.
45. S.H. Cho, “Shear Strength Prediction by Modified Plasticity Theory for Short Beams,” ACI Structural Journal, Vol. 100, No. 1, January, pp. 105-112, 2003.
46. P.D. Zararis, “Shear strength and minimum shear reinforcement of reinforced concrete slender beams,” ACI Structural Journal, Vol. 100, No. 2, March 1, pp.
203-214, 2003.
47. E.C. Bentz, “Empirical modeling of reinforced concrete shear strength size effect for members without stirrups,” ACI Structural Journal, Vol. 102, No. 2, March 1, pp. 232-241, 2005.
48. ACI Committee 318, “Building Code Requirements for Structural Concrete (ACI 318-05) and Commentary (318R-05),” American Concrete Intitute, Farmington Hills, Mich., 2005.
49. W. Ritter, “Die bauweise hennebique,” Schweizerische Bauzeitung, 33(7),59-61, 1899.
50. E. Mörsch, “Concrete Steel Construction (translation of the 3rd German Edition of Der Eisenbetonbau by E. P. Goodrich), McGraw-Hill Book Co., New York, 368 pp., 1909
51. A.P. Clark, “Diagonal tension in reinforced concrete beams,” ACI Journal, Vol.
48, No. 10, Oct., pp. 145-15, 1951.
52. Joint ACI-ASCE Committee 426, “The Shear Strength of Reinforced Concrete Members,” Journal of Structural Division, ASCE, V99, No. ST6, June, pp.1091-1187, 1973.
53. R. Park and T. Paulay, Reinforced Concrete Structures, John wily & Sons, 1975.
54. Kani, G. N. J., “How Safe are our Reinforced concrete Beams?＂ ACI Journal, Proceedings Vol.64, No3, Mar. 1967, pp. 128~141.
55. Kani, G. N. J., “Riddle of shear failure and it’s solution,＂ ACI Journal, Proceedings Vol.63, No6, Jan. 1966, pp. 675~692.
56. Ahmad, Shuaib H.; Khaloo A.R. & Poveda A., “Shear Capacity of Reinforced High-Strength Concrete Beams,” ACI Journal, Proceedings Vol.83, No2, Mar. ~ Apr. 1986, pp. 297~305.
57. Ahmad, Shuaid H. & Lue, D. M., “Flexure-Shear Interaction of Reinforced High-Strength concrete Beams,” ACI Structure Journal, Vol.84, No4, Jul. ~ Aug 1987, pp. 330~341.
58. H. P. J. Taylor, “Shear Strength of large Beams,” Journal of The Structure Division, ASCE, Vol.98, No4, Nov. 1972, pp. 2473~2490.
59. Neville , Adam M., “A General Relation For Strength of Concrete Specimens of Different Shapes And Size,” ACI Structure Journal, Vol.60, No10, Dec 1966, pp. 1095~1109.
60. Arroyo Alberto etc.,“Flexure-Shear Interaction of Reinforced High-Strength concrete Beams,＂ By Shuaib H. Ahamad and D. M. Lue, ACI Structure Journal, Vol.85,No3, May. ~ Jun. 1988 pp. 354~358.
61. Akhtaruzaman Ali A. , And Hasant, Abul, “Shear And Flexural Behavior of Brick-Aggregate Concrete Beams Without Web Reinforcement,＂ ACI Journal,
May. ~ Apr., 1986 pp. 284~290.
62. S.U. Pillai, D.W. Kirk, “Reinforced Concrete Design,＂ Second Edition.
63. ACI 318, “Building Code Requirements for Structural Concrete (AC1318-99) and Commentary (AC1318R-99),＂ American Concrete Institute, june 1999.
64. Zsutty T. C., “Beam Shear Strength Prediction By Analysis of Existing Data”，
ACI Journal, Proceedings V.65, No. 11, Nov. 1986, pp.943-951.
65. 陳建權，「大飛灰含量高強度混凝土 RC 梁之剪力強度」，中興大學土木研 究所碩士論文，1991 年 6 月。
66. Bazant Zdenek P. and Kim-Keun, “Size Effect In Shear Failure of Longitudinally Reinforced Beams,” ACI Journal, Proceedings V.81, No. 5, Sep.
~ Oct., 1984, pp. 456-468.
67. H. Mihashi, H. Okamura and Z.P. Bazant(eds.) Size Effect in Concrete Structures, E & FN Spon, London, 1994.
68. S. P. Shah, S. E. Swartz and C. Ouyang, p.552, Fracture Mechanics of Concrete, John Wiley & Sons, Inc., New York, 1995.
69. A. Carpinteri, Applications of Fracture Mechanics to Reinforced Concrete, Elsevier Science Publishers Ltd., England, 1992.
70. P. J. Gustafsson and A. Hillerborg, ACI Struct. J. 85, 286(1988).
71. A. Hillerborg, M. Modeer and P. E. Petersson, Cem. Concr. Res. 6,773(1976).
72. Z. P. Bazant and B. H. Oh, Mater. Struct. 16, 155(1983).
73. Y. S. Jenq and S. P. Shah, J. Eng. Mech. 111, 1227(1985) 74. Z. P. Bazant, J. Engrg. Mech. 110, 518(1985).
75. Z. P. Bazant, M. T. Kazemi, T. Hazegawa, and J. Mazars, ACI Mater. J. 88, 325(1991)
76. Z. P. Bazant, S. Sener and P. Prat, Mater, Struct. 21, 425(1988)
77. B. Barr and Z. Y. Tokatly, Applications of Fracture Mechanics to Reinforced Concrete, A. Capinteri (ed.), Elsevier Science Publishers Ltd., England, 1992.