第五章 結論與建議
5.2 建議
1. 本研究結果得知，在低矽鋁比下之吸附材具有較高之去除效能，
而高比表面積又有利於吸附，未來建議可嘗試其他MCM-41 製備 方法(如：氣相法)或是不同比例之混合前驅溶液，以製備出更低矽 鋁比之中孔洞吸附材，以利吸附。
2. 除了銅金屬觸媒外，其他過渡金屬如鐵、鉻…等金屬皆是吸附氨 氣之活性金屬物質，未來可建議與分子篩擔體結合後之吸附效能 及吸附容量做進一步探討。
3. 本研究使用之吸附測試若是填充粉體量過高，容易造成壓損的問 題，建議未來可以先以壓定成型機壓定後以製備固體顆粒吸附材 進行實驗。
4. 本研究結果顯示，進流濃度及相對溼度改變會影響吸附材之去除 效率，因此建議在應用時須注意其環境測試條件及適用性。
第六章 參考文獻
Baek, S. W., Kim, J. R., Ihm, S. K. (2004) “Design of dual functional adsorbent/catalyst system for the control of VOC’s by using metal-loaded hydrophobic Y-zeolites” Catalysis Today, vol.93–95, 575-581
Beck, J. S., Vartuli, J. C., Roth, W. J., Leonowicz, M. E., Kresge, C. T., Schmitt, K. D., Chu, C. T-W., Olson, D. H., Sheppard, E. W., McCullen, S. B., Higgins, J. B. and Schlenker, J. L. (1992) “A New Family of Mesoporous Molecular Sieves Prepared with Liquid Crystal Templates” Journal of the American Chemical Society, vol.114, 10834-10843
Bore, M.T., Rathod, S.B., Ward T.L., Datye, A.K. (2003) “Hexagonal mesostructure in powders produced by evaporation-induced self-assembly of aerosols from aqueous tetraethoxysilane solutions”
Langmuir, vol.19, 256-264
Chen, X., Huang, L., Ding, G., Li, Q. (1997) “Characterization and catalytic performance of mesoporous molecular sieves Al-MCM-41 materials” Catalysis Letters, vol.44, 123-128
Chen, W. X., Lu,. S. F., Yao, Y. Y., Pan, Y., Shen, Z. Q. (2005)
“Copper(II)-silk fibroin complex fibers as air-purifying materials for removing ammonia” Textile research journal, vol.75,326-330
Chu, C. L., Lin, P. H., Dong, Y. S., Guo, D. Y. (2002) “Influences of citric acid as a chelating reagent on the characteristics of nanophase hydroxyapatite powders fabricated by a sol-gel method” Journal of materials science letters, vol.21, 1973-1975
Chingombe, P., Saha, B., Wakeman, R. J. (2005) “Surface modification and characterization of a coal-based activated carbon” Carbon, vol.43,
3132-3143
Ciahotny, K., Melenova, L., Jirglova, H., Pachtova, O., Kocirik, M., Eic, M. (2006) “Removal of ammonia from waste air streams with clinoptilolite tuff in its natural and treated forms” Adsorption, vol.12, 219-226
Cooper, C. D., Alley, F. C. (1994) “Air Pollution Control：A Design Approach, 2ndEd., Waveland Press, Inc
Corma, A. (1997) “From Microporous to Mesoporous Molecular Sieve Materials and Their Use in Catalysis” Chemical reviews, vol.97, 2373-2419
D´ıaz, E., Ord´o˜nez, S., Vega, A., Coca, J. (2004) “Adsorption
characterisation of different volatile organic compounds over alumina, zeolites and activated carbon using inverse gas chromatography”
Journal of Chromatography A., vol.1049, 139-146
Delabie, A., Pierloot, K., Groothaert, M. H., Weckhuysen, B. M., Schoonheydt, R. A. (2000) “Study of the coordination of Cu(II) in zeolite Y : Interaction with water and ammonia” Microporous and Mesoporous Materials, vol.37, 209-222
Fan, Y., Bao, X., Lin, X., Shi, G., Liu, H. (2006) “Acidity Adjustment of HZSM-5 Zeolites by Dealumination and Realumination with Steaming and Citric Acid Treatments” Journal of Physical Chemistry B, vol.110, 15411-15416
Feng, X., Hall, W. K. (1997) “FeZSM-5: A Durable SCR Catalyst for NOx Removal from Combustion Streams” Journal of Catalysis, vol.166, 368-376
Frei, H., Blatter, F., Sun, H. (1996) “Photocatalyzed oxidation of hydrocarbons in zeolite cages” CHEMTECH, vol.26, 24-30
Frickinger, J., Bugler, J., Zielonka, G., Pfitzner, L., Ryssel, H., Hollenmann, S., Schneider, H. (2000) “Reducing Airborne Molecular
Contamination by Efficient Puring of FOUPs for 300-nm Wafer-The Influence of Materials Properties” IEEE Transactions on Semiconductor Manufacturing, vol.13, 427-433
Gervasini, A., Picciau, C., Auroux, A. (2000) “Characterization of copper-exchanged ZSM-5 and ETS-10catalysts with low and high degrees of exchange” Microporous and Mesoporous Materials, vol.35–36, 457–469
Gil, A. (1998) “Analysis of the Micropore Structure of Various
Microporous Materials from Nitrogen Adsorption at 77 K” Adsorption, vol.4, 197-206
Gokulakrishnan, N., Pandurangan, A., Sinha, P. K. (2000) “Effective uptake of decontaminating agent (citric acid) from aqueous solution by mesoporous and microporous materials: An adsorption process”
Chemosphere, vol.63, 458-468
Guo, J., Lua, A. C. (1999) “Textural and chemical characterizations of activated carbon prepared from oil-palm stone with H2SO4 and KOH impregnation” Microporous and Mesoporous Materials, vol.32, 111-117
Guo, J., Xu, W. S., Chen, Y. L., Lua, A. C. (2005) “Adsorption of NH3
onto activated carbon prepared from palm shells impregnated with H2SO4” Journal of Colloid and Interface Science, vol.281, 285-290 Gupta, A., Gaur, V., Verma, N. (2004) “Breakthrough Analysis for
Adsorption of Sulfur-Dioxide Over Zeolite” Chemical Engineering and Processing, vol.43, 9-22
Halliche, D., Cherifi, O., Auroux, A. (2005) “Microcalorimetric studies and methane reforming by CO2 on Ni-based zeolite catalysts”
Thermochimica Acta, vol.434, 125-131
Hampsey, J. E., Arsenault, S., Hu, Q., Lu, Y. (2005) “One step synthesis of mesoporous metal SiO2 particles by an aerosol assisted self
assembly process” Chemistry of Materials, vol.17, 2475-2480
Helminen, J., Helenius, J., Paatero, E. (2001) “Adsorption Equilibria of Ammonia Gas on Inorganic and Organic Sorbents at 298.15 K” Journal of Chemical and Engineering Data, vol.46, 391-399
Higley, J. K., Joffe, M A. (1996) “Airborne Molecular Contamination:
Cleanroom Control Strategies” Solid State Technology, vol.39, 211-217 Hiroshi, I., Asaba, H., Takenchi, Y. (1998) “Removal of H2S, CH3SH, and (CH3)3N from Air by Use of Chemically Treated Activated Carbon”
Journal of Chemical Engineering of Japan, vol.21, 91-97
Huang, Y. J., Wang, H. P., Hsiao, M. C., Tai, C. C., Huang, H. L., Liu, S.
H. (2003) “Speciation of copper in micropores” Water, Air, and Soil Pollution, vol.153, 187-194
Huang, Y. Y., Vansant, E. F. (1973) “Adsorption of Ammonia in Copper (II) Y Zeolites” The Journal of Physical Chemistry, vol.77, 663-667 Hung, C. T., Bai, H., Karthik, M., Lin, L. Y. (2007) “Comparison of
mesoporous silica particles and MCM-41 as adsorbents for acetone removal” Presented at The 4th Conference on Environmental Protection and Nanotechnology, May, Taichung, Taiwan.
Itadani, A., Kuroda, Y., Tanaka, M., Nagao, M. (2005) “Unambiguous evidence supporting the decomposition reaction of NO on two types of monovalent copper-ion in CuZSM-5 zeolite” Microporous and Mesoporous Materials, vol.86, 159–165
Ivanov, A. V., Graham, G. W., Shelef, M. (1999) “Adsorption of hydrocarbons by ZSM-5 zeolites with different SiO2/Al2O3 ratios: a combined FTIR and gravimetric study” Applied Catalysis B:
Environmental, vol.21, 243-253
Iwamoto, M., Yahiro, H., Torikai, Y., Yoshioka, T., Mizuno, N. (1990)
“Novel Preparation Method of Highly Copper Ion-exchanged ZSM-5 Zeolite and Their Catalytic Activities for No Decomposition”
Chemistry Letters, vol.19, 1967-1970
Jackson, S. D., Leeming, P., Webb, G. (1996) “Supported Metal Catalysts:
Preparation, Characterisation, and Function IV. Study of Hydrogen Sulphide and Carbonyl Sulphide Adsorption on Plantinum Catalysts”
Journal of Catalysis, vol.160, 235-243
Juozaitis, A., Trakumas, S., Girgzdiene, R., Girgzdys, A., Sopauskiene, D., Ulevicius, V. (1996) “Investigations of Gas-to-Particle Conversion in the Atmosphere” Atmospheric Research, vol.41, 183-201
Kresge, C. T., Leonowicz, M. E., Roth, W. J., Vartuli, J. C., Beck, J. C.
(1992) “Ordered mesoporous molecular sieves synthesized by a liquid-crystal template mechanism” Nature, vol.359, 710-712
Kokotailo, G. T., Lawton, G. R., Olson, D. H., Meier, W. M. (1978)
“Structure of synthetic zeolite ZSM-5” Nature, vol.272, 437-438
Kim, J. M., Kwak, J. H., Jun, S., Ryoo, R. (1995) “Ion Exchange and Thermal Stability of MCM-41” The Journal of Physical Chemistry, vol.99, 16742-16747
Lapkin, A., Bozkaya, B., Mays, T., Borello, L., Edler, K., Crittenden, B.
(2003) “Preparation and characterisation of chemisorbents based on heteropolyacids supported on synthetic mesoporous carbons and silica’’
Catalysis Today, vol.81, 611-621
Lee, H. K., Shim, M. J., Lee, J. S., Kim S. W. (1996) “Characteristics of CO gas adsorption on modified natural zeolite” Materials Chemistry and Physics, vol.44, 79-84
Lee, W. H., Rucroft, P. J. (1999a) “Vapor Adsorption on Coal- and Wood- based Chemically Activated carbons(Ⅰ) Surface Oxidation States and Adsorption of H2O”CARBON, 37,7-14.
Leuch, L. M., Bandosz, T. J. (2007) “The role of water and surface acidity on the reactive adsorption of ammonia on modified activated carbons”
Carbon, vol.45, 568-578
Leuch, L. M., Subrenat, A., Cloirec, P. L. (2005) “Hydrogen sulfide and ammonia removal on activated carbon fiber cloth-supported metal
oxides” Environmental Technology, vol.26, 1243-1254 Lin, K. S., Wang, H. P. (2000) “Byproduct shape selectivity in
supercritical water oxidation of 2-chlorophenol effected by CuO/ZSM-5” Langmuir, vol.16, 2627-2631
Liu, C. Y., Aika, K. I. (2003) “Ammonia Adsorption on Ion Exchanged Y-zeolites as Ammonia Storage Material” Journal of the Japan
Petroleum Institute, vol.46, 301-307
Liu, X. M., Yan, Z. F. (2001) “Optimization of nanopores and acidity of USY zeolite by citric modification’’ Catalysis Today, vol.68, 145-154 Lu, Y., Fan, H., Stump, A., Ward, T.L., Rieker, T., Brinker, C.J. (1999)
“Aerosol-assisted self-assembly of mesostructured spherical nanoparticles” Nature, vol.398, 223-226
Manero, M. H., Jain, R. K., Aurelle, Y., Cabassud. C., Roustan, M. (1996) Environmental Technologies and Trends, Springer, New York.
MSDS:CitricAcid,http://www.coastalscents.com/cfwebstore/index.cfm?fu seaction=feature.display&feature_id=217
Niwa, M., Suzuki, K., Isamoto, K., Katada N. (2006) “Identification and Measurements of Strong Bronsted Acid Site in USY Zeolite” Journal of Physical Chemistry B, vol.110, 264-269
Mishin, I. V., Brueva, T. R., Kapustin, G. I. (2005) “Heats of Adsorption of Ammonia and Correlation of Activity and Acidity in Heterogeneous Catalysis ” Adsorption, vol.11, 415-424
Öhman, L. O., Ganemi, B., Björnbom, E., Rahkamaa, K., Keiski, R. L., Paul, J. (2002) “Catalyst preparation through ion-exchange of zeolite Cu-, Ni-, Pd-, CuNi- and CuPd-ZSM-5” Materials Chemistry and Physics, vol.73, 263-267
Parida, K. M., Rath, D. (2007) “Structural properties and catalytic oxidation of benzene to phenol over CuO-impregnated mesoporous silica” Applied Catalysis A: General, vol.321, 101-108
Park, S. J., Kim, B. J. (2005) “Ammonia removal of activated carbon fibers produced by oxyfluorination” Journal of Colloid and Interface Science, vol.291, 597-599.
Parvulescu, V., Su, B. L. (2001) “Iron, cobalt or nickel substituted MCM-41 molecular sieves for oxidation of hydrocarbons” Catalysis Today, vol.69, 315-322
Perrino, C., Gherardi, M. (1999) “Optimization of the coating layer for the measurement of ammonia by diffusion denuders” Atmospheric Environment, vol.33, 4579-4587
Pinna, F. (1998) “Supported metal catalysts preparation” Catalysis Today, vol.41, 129-137
Salker, A. V., Weisweiler, W. (2000) “Catalytic behaviour of metal based ZSM-5 catalysts for NOx reduction with NH3 in dry and humid
conditions” Applied Catalysis A: General, vol.203, 221–229
Stach, H., Lohse, U., Thamm, H. Schirmer, W. (1986) “Adsorption equilibria of hydrocarbons on highly dealuminated zeolites’’ Zeolites, vol.6, 74-90
Serrano, D. P., Calleja, G., Botas, J. A., Gutierrez, F. J. (2004)
“Adsorption and Hydrophobic Properties of Mesostructured MCM-41 and SBA-15 Materials for Volatile Organic Compound Removal”
Industrial & Engineering Chemistry Research, vol.43, 7010-7018
Tamaoki, M., Nishiki, K., Shimazaki, A., Sasaki, Y., Yanagi, S. (1995)
“The effect of airborne contaminants in the cleanroom for ULSI manufacturing process’’ Advanced Semiconductor Manufacturing Conference and Workshop. ASMC 95 Proceedings. IEEE/SEMI , 322- 326
Tehrani, R.M.A., Salari, A. A. (2005) “The study of dehumidifying of carbon monoxide and ammonia adsorption by Iranian natural clinoptilolite zeolite” Applied Surface Science, vol.252, 866-870
U.S.EPA, Chapter IO-4 (1999) “Determination of Reactive Acidic and Basic Gases and Strong Acidity of Atmospheric Fine Particles in Ambient Air Using the Annular Denuder Technology” Overview, Cincinnati, OH 45268.
Yan, Z., Ma D., Zhuang J., Liu X., Liu X., Han X., Bao X., Chang F., Xu L., Liu Z. (2003) “On the acid-dealumination of USY zeolite : a solid state NMR investigation” Journal of Molecular Catalysis A :Chemical , vol.194, 153-167
Yeh, C. F., Hsiao, C. W., Lin, S. J., Hsieh, C. M., Kusumi, T., Aomi, H., Kanoko, H., Dai, B. T., Tsai, M. S. (2004) “The Removal of Airborne Molecular Contamination in Cleanroom Using PTFE and Chemical Filters” IEEE Transactions on semiconductor manufacturing, vol.17, 214-220
Yin, F., Blumenfeld, A. L., Gruver, V., Fripiat, J.J. (1996) “NH3 as a Probe Molecule for NMR and IR Study of Zeolite Catalyst Acidity’’
Journal of Physical Chemistry B, vol.101, 1824-1830
Ying, J. Y., Mehnert, C. P., Wong, M. S. (1999) “Synthesis and Applications of Supramolecular-Templated Mesoporous Materials”
Angewandte Chemie International Edition, vol.38, 56-77
Zhai, S., Zhang, Y., Wu, D., Sun, Y., Wang, S. (2006) “Comparative study on the structural, acidic and catalytic properties of nano-sized and large-particulate mesoporous aluminosilicates” Topics in Catalysis, vol.39, 227-235
Zhao, X. S., Ma, Q., Lu, G. Q. (1998) “VOC Removal: Comparison of MCM-41 with Hydrophobic Zeolites and Activated Carbon” Energy and Fuels, vol.12, 1051-1054
Zhao, X. S., Lu, G. Q., (1998) “Modification of MCM-41 by surface silylation with trimethylchlorosilane and adsorption study” Journal of Physical Chemistry B, vol.102, 1556-1661
白曛綾等(2002)，“新竹科學園區半導體及光電製造業空氣污染防治