未來展望

3. 本研究利用 APPAB 技術進行 glass-Al/glass、glass-Ni/Si 與 glass-Al/AAO 之接合試驗，除了需再找出最佳之接合參數，以達到完全接合之目的

1. 工研院產業經濟與區是研究中心及資策會資訊市場情報中心, ”2015 年 台灣重要產業技術發展藍圖”, 工研院 IEK (2008).

2. 楊啟榮等人, "微機電系統技術與應用", 精密儀器發展中心, 第四章, pp. 141 (2003).

3. V. Dragoi, M. Alexe, M. Reiche, and U. M. Gösele, ECS Meeting Abtracts, MA 99-2, 972 (1999).

4. F. Secco d’Aragona, T. Iwamoto, H.-D. C. Chiou, and A. Mizza, ECS Meeting Abtracts, MA 97-2, 2052 (1997).

5. G. Wallis and D. I. Pomerantz, “Field assisted glass-metal sealing", Journal of applied physics, 40, 10, pp. 3946-3949 (1969).

6. G. Klink and B. Hillerich, SPIE conference on micromachined devices and components, Santa clara, CA SPIE 3512, pp. 50-61 (1998).

7. 楊啟榮等人, "微機電系統技術與應用", 精密儀器發展中心, 第十章, pp. 791 (2003).

8. T. Roger, J. Kowal, “Selection of glass, anodic bonding conditions and material compatibility for silicon-glass capacitive sensors,” Sens.

Actuators A 46/47 (1995) 113-120.

9. 蕭宏，半導體製程技術導論 (2002), p175, 台灣培生教育出版股份有限 公司.

10. P.M. Mendes, S.Jacke, K. Critchley, J.Plaza, Y. Chen, K. Nikitin, R.E.

Palmer, J.A. Preece, S.D. Evans, and D. Fitzmaurice, “Gold Nanoparticle Patterning of Silicon Wafers Using Chemical e-Beam Lithography,”

Langmuir 20 (2004) 3766.

11. Y. Gonin, F. Munnik, F. Benninger, S. Mikhailov, “Creating sub-surfacechannels in PMMA with ion beam lithography in only one step,” App. Sur. Sci. 217 (2003) 289.

14. M. Rolandi, I. Suez, H.J. Dai, J.M.J. Frechet, “Dendrimer monolayers as negative and positive tone resist for scanning probe lithography,” Nano Lett. 4 (2004) 889.

15. Y. Liua, H.H. Wang, J.E. Indacochea, M.L. Wang, “A colorimetric sensor based on anodized aluminum oxide (AAO) substrate for the detection of nitroaromatics,” Sensors and Actuators B 160 (2011) 1149– 1158.

16. D. Dobrev, J. Vetter, N. Angert, R. Neumann, “Growth of ion single crystal in the etched ion tracks of polymer foil,” Appl. Phys. A72 (2001) 729.

17. K.S. Park, K.J. Cha, I.B. Han, D.A. Shin, D.W. Cho, S.H. Lee, D.S. Kim,

“Mass-producible Nano-featured Polystyrene Surfaces for Regulating the Differentiation of Human Adipose-derived Stem Cells,” Macromol. Biosci.

12 (2012), 1480-1489.

18. N. Hall, G. Ozin, “The photonic opal-the jewel in the crown of optical information processing,” Chem. Commu. (2003) 2639.

19. D. Dobrev, J. Vetter, N. Angert, and R. Neumann, “Growth of ion single crystal in the etched ion tracks of polymer foils,” Appl. Phys. A 72 (2001) 729.

20. 朱旭山, “熱電材料與元件之發展與應用”, 工業材料雜誌, 第 200 期, 2005.

21. Retrieved April 10, 2013, from http://www.marlow.com/

22. Retrieved April 10, 2013, from http://www.themotorreport.com.au/

23. Retrieved April 10, 2013, from http://www.sii.co.jp /

24. L.D. Hicks, M.S. Dresselhaus, “Effect of quantum-well structures on the thermoelectric figure of merit,” Phys. Rev. B, (1993), 47(19):

12727-12731.

25. 朱旭山, “奈米結構熱電材料之發展回顧”, 工業材料雜誌, 第 298 期,

28. 莊達人, "VLSI 製造技術", 高立圖書有限公司, (2002).

29. S. Shoji, H. Kikuchi and H. Torigoe, “Low-temperature anodic bonding using lithium aluminosilicate-β-quartz glass ceramic”, Sensors and Actuators, A64, 95-100 (1998).

30. 張家豪等人, "電漿源原理與應用之介紹", 物理雙月刊, (2006).

31. P. K. Chua, J. Y. Chena, L. P. Wanga and N. Huangb, “Plasma-surface modification of biomaterials", Materials science and engineering, 36, pp.

143-206 (2002).

32. http://plasmaclean.blogspot.com/2009_10_01_archive.html

33. J. Y. Jeong, S. E. Babayan, V. J. Tu, J. Park, I. Henins, R. F. Hicks and G. S.

Selwyn, “Etching materials with an atmospheric-pressure plasma jet", Plasma sources science technology, 7, pp. 282-285 (1998).

34. Y. C. Hing, H. S. Uhm and W. J. Yi, “Atmospheric pressure nitrogen plasma jet: Observation of striated multilayer discharge patterns", Applied physics letters, 93, 051504 (2008).

35. M. H. Han, J. H. Noh, T. I. Lee, J. H. Choi, K. W. Park, H. S. Hwang, K.

M. Song and H. K. Baik, “High-rate SiO₂ deposition by oxygen cold arc plasma jet at atmospheric pressure ", Plasma processes and polymers, 5, pp.

861-866 (2008).

36. Y. Kana . K. Mazunori, C. Muradnm, and J. Sugaya, “Fusing silicon wafers with low melting temperature glass”, Sensors and actuators, A21-23, pp. 939-943 (1990).

37. M. Despont, H. Gross, F. Arrouy, C. Stebler and U. Staufer, “Fabrication of a silicon-Pyrex-silicon stack by a.c. anodic bonding”, Sensors and actuators, A55, pp. 219-244 (1996).

38. K. B. Albaugh, “Rate processer during anodic bonding”, Journal of the american ceramic society, V75, pp. 2644-2650 (1992).

39. M. A. Morsy, K. Ikenchi, M. Ushio and H. Abe, “Mechanism of

41. 邱國麟, "射頻磁控濺鍍金屬膜於矽晶片與 Pyrex 7740 玻璃陽極接合之 研究", 彰化師範大學機電工程學系, 碩士論文, (2004).

42. K. B. Albaugh and P. E. Cade, “Mechanisms of anodic bonding of silicon to Pyrex glass”, IEEE, 88, pp. 109-110 (1988).

43. M.J. Wild, A. Gillner, R. Poprawe, “Locally selective bonding of silicon and glass with laser”, Sensors and actuators, A 93, pp. 63-69 (2001).

44. U.M. Mescheder, M. Alavi, K. Hiltmann, Ch. Lietzau, Ch. Nachtigall, H.

Sandmaier, “Local laser bonding for low temperature budget”, Sensors and actuators, A 97-98, pp. 422-427 (2002).

45. Y.T. Cheng, Liwei Lin and Khalil Najafi, “Localized bonding with PSG or Indium Solder as intermediate layer”, IEEE, pp. 285-289 (1999).

46. Y.T. Cheng, W.T. Hsu, K. Najafi, Clark T.-C. Nguyen, Liwei Lin, “Vacuum packing technology using localized aluminum/silicon-to-glass bonding”, Journal of Microelectromechanical systems, Vol. 11, No. 5 (2002).

47. H.A. Yang, M.C. Wu, W.L. Fang, “Localized induction heating solder bonding for wafer level MEMS pcaking”, J. Micromech. Microeng. 15 (2005) 394-399.

48. J. Wei, H. Xie, M. L. Nai, C. K. Wong and L. C. Lee, “Low temperature wafer anodic bonding”, Journal of micromechanics and microengineering, pp. 217-222 (2003).

49. 陳凱林, "半導體濺鍍靶材製程技術與薄膜特性", 工業雜誌, 第 19 期, (2003).

50. Q. Y. Tong and U. Gosele “Semiconductor wafer bonding science and technology”, John Wiley & Sons INC. USA (1999).

51. W. T. Yen and Y. C. Lin, “A study on the bonding condition and mechanism for glass-to-glass anodic bonding in field emission display”,

M. Poumirol and A. Shukla, “Anodic bonding graphene”, Journal of physics D: Applied physics, 43, 374013 (2010).

54. http://www.auo.com/?sn=57&lang=zh-TW

55. S. Park and M. Kim, “Fabrication method of spacers with high aspect ratio-Used in a field emission display (FED)”, Microsystem technologies, 7, pp. 32-35 (2001).

56. D. J. Lee, Y. H. Lee, J. Jang and B. K. Ju, “Glass-to-glass electrostatic bonding with intermediate amorphous silicon film for vacuum packaging of microelectronics and its application”, Sensors and actuators A, 89, pp.

43-48 (2001).

57. Y. Yamazaki, “Application of MEMS technology to micro fuel cells”, Electrochimica acta, 50, pp. 663-666 (2004).

58. Z. Wang, D. Wang, N. Jiao and Z. Dong, “Nanochannel system fabricated by MEMS microfabrication and atomic force microscopy”, IET nanobiotechnology, 5, 4, pp. 108-113 (2011).

59. Z. Q. Wang, D. Wang, S. Tung, N. D. Jiao and Z. L. Dong, “A nanochannel system fabricated by MEMS microfabrication and atomic force microscopy”, Proceeding international conference on Nano/Micro engineered and molecular systems, pp. 380-384 (2011).

60. M. C. Lee, S. J. Kang, K. D. Jung, S. H. Choa Y. C. Cho, “A high yield rate MEMS gyroscope with a packaged SiOG process”, Journal of micromechanics and microengineering, pp. 2003-2010 (2005).

61. G. W. Hsieh, C. H. Tsai and W. C. Lin, “Anodic bonding of glass and silicon wafers with an intermediate silicon nitride film and its application to batch fabrication of SPM tip arrays”, Microelectronics journal, pp.

678-682 (2005).

62. F. Keller, M.S. Hunter, D.L. Robinson, “Structure features of oxide coating on aluminum”, J. Electrochemical Soc. Vol. 100, Issue 9, pp. 411-419

64. O. Jessensky, F. Müller, U. Gösele, “Self-organized formation of hexagonal pore arrays in anodic alumina”, Appl. Phys. 72, 10 (1998).

65. S.K. Hwang, J.Lee, S.H Jeong, P.S. Lee, K.H. Lee, “Fabrication of carbon nanotube emitters in an anodic aluminium oxide nanotemplate on a Si wafer by multi-step anodization”, Institute of Phy. Publishing Nanotechnology 16 (2005) 850-858.

66. D.S. Kim, H.U. Lee, N.H. Kim, K.H. Lee, D.W. Cho, T.H. Kwon,

“Fabrication of microchannel containing nanopillar arrays using micromachined AAO mold”, Micro. Engineering 84 (2007) 1532-1535.

67. Nevin Taşaltın, Sadullah Öztürk, Necmettin Kılınç, Hayrettin Yüzer, Zafer Ziya Ö ztürk, “Fabrication of Pd-Fe nanowires with a high aspect ratio by AAO template-assisted electrodeposition”, Journal of Alloy and Compounds 509 (2011) 3894-3898.

68. Fang Jiao, Qiyu Huang, Wangchun Ren, Wei Zhou, Fangui Qi, Yizhou Zheng, Jing Xie, “Enhanced performance for solar cells with moth-eye structure fabricated by UV nanoimprint lithography”, Micro. Engineering 103 (2013) 126-130.

69. S.J. Limmer, W.G. Yelton, M.P. Siegal, J.L. Lensch-Falk, J. Pillars, D.L.

Medlin, “Electrochemical deposition of Bi₂(Te,Se)₃ nanowires arrays on Si”, Journal of The Electrochemical Society, 159 (4) D235-D239 (2012) 70. J. Oh, C.V. Thompson, “Selective barrier perforation in porous alumina

anodized on substrates”, Adv. Mater. 20, 1368-1372 (2008).

71. C.C Chen, C.H. Cheng, C.K. Lin, “Template assisted fabrication of TiO₂ and WO3 nanotubes”, Ceramics International Vol.39, Issue 6, (2013) 6631-6636.

72. S. Samanman, C. Thammakhet, P. Kanatharana, C. Buranachai, P.

Thavarungkul, “Novel template-assisted fabrication of porous gold nanowire arrays using a conductive-layer-free anodic alumina oxide