第五章 結論與未來展望
5.2 未來展望
在這個能源危機越來越逼近的年代，太陽能的發展已是未來的趨勢，
雖然近年來由於市場價格逐漸降低、政府補助縮減、加上許多人大舉進 軍太陽能市場，造成供給過剩，導致整個太陽能產業呈現停頓的現象，
但在目前競爭激烈的淘汰賽裡，各種新興技術的研發仍然是不可缺少的，
若只是緊縮預算，致使技術的研發裹足不前，則將會被其他競爭對手給 遠遠拋下。
由於薄膜電池的低成本考量，故被視為未來的主流方向，而在 CIS 中以非真空製程，非高溫硒化的低成本製程考量，若是經過最佳化處理，
與更好的條件控制，達到較佳的良率與產出，其發展性將會更加可觀。
尤其電鍍製程應用在大面積製作上有其優勢，且若是結合高分子材料，
製作在可撓性基板上，利用熱壓技術壓印抗反射結構在基板上，亦是一 種不錯的挑戰與應用。
參考文獻
1. 古鎮南, 微/奈米抗反射結構應用於矽晶太陽能電池之研製, 國立臺灣師 範大學, 碩士論文, 2010
2. R. Bhattacharya, Electrodeposition of CuIn1-xGaxSe2 materials for solar cells, NREL, 2011
3. 詹逸民, 葉昱均, 矽薄膜太陽能電池製程技術, 工業材料雜誌，258 (2008)
4. T. Nakada, Y. Hirabayashi, T. Tokado, D. Ohmori, and T. Mise, Novel device structure for Cu(In,Ga)Se2 thin film solar cells using transparent conducting oxide back and front contacts, Solar Energy, 77 (2004) 739–747 5. S. Lin, X. Shi, X. Zhang, H. Kou, and C. Wang, Ternary semiconductor
compounds CuInS2 (CIS) thin films synthesized by electrochemical atomic layer deposition (EC-ALD), Applied Surface Science, 256 (2010) 4365–
4369
6. C. J. Hibberd, E. Chassaing, W. Liu, D. B. Mitzi, D. Lincot, and A. N.
Tiwari, Non-vacuum methods for formation of Cu(In, Ga)(Se, S)2 thin film photovoltaic absorbers, Progress in Photovoltaics: Research and Application, 18 (2010) 434–452
7. A. Ihlal, K. Bouabid, D. Soubane, M. Nya, O. Aittalebali, Y. Amira,A.
Outzourhit, and G. Nouet, Comparative study of sputtered and electrodeposited CI(S,Se) and CIGSe thin films, Thin Solid Films, 515 (2007) 5852–5856
8. B.M. Basol, M. Pinarbasl, S. Aksu, J. Freitag, P. Gonzalez, T. Johnson, Y.
Matus, B. Metin, M. Narasimhan, D. Nayak, G. Norsworthy, D. Soltz, J.
Wang, T. Wang, and H. Zolla, Status of electroplating based CIGS technology development, Photovoltaic Specialists Conference, (2009) 2310–
2315
9. N.G. Renganathan, M.V. Subramanian, and S. Mohan, Electrodeposition route to synthesize CIGS films – an economical way to harness solar energy, International Journal of Engineering, Science and Technology, 3(1) (2011) 206–212
10. J. Nelson, The physics of solar cells, Imperial College Press, 2002
11. B. Basol, Commercialization of high efficiency low cost CIGS technology based on electroplating, NREL, 2009
12. 張智閔, 利用電沉積方法製備CIS太陽能電池結構, 國立成功大學, 碩士 論文, 2007
13. M. Harati, J. Jia, K. Giffard, K. Pellarin, C. Hewson, DA. Love, WM Lau, and Z. Ding, One-pot electrodeposition, characterization and photoactivity of stoichiometric copper indium gallium diselenide (CIGS) thin films for solar cells, Physical Chemistry Chemical Physics, 12 (2010) 15282–15290 14. F. Chraibi, M. Fahoume, A. Ennaoui, and J.L. Delplancke, Influence of
citrate ions as complexing agent for electrodeposition of CuInSe2 thin films, Physica Status Solidi (a), 186(3) (2001) 373–381
15. J. Waldau, Progress in chalcopyrite compound semiconductor research for photovoltaic applications and transfer of results into actual solar cell production, Solar Energy Materials and Solar Cells, 95 (2011) 1509–1517 16. 楊啟榮，微機電系統原理與應用上課講義
17. Y.S. Jung, H.W. Choi, K.H. Kim, S. J. Park and H. H. Yoon, Properties of AZO thin films for solar cells deposited on polycarbonate substrates, Journal of the Korean Physical Society, 55(5) (2009) 1945–1949
18. W. J. Jeong, S.K. Kim, and G.C. Park, Preparation and characteristic of ZnO thin film with high and low resistivity for an application of solar cell, Thin Solid Films, 506–507 (2006) 180–183
19. U.P. Singh and S.P. Patra, Progress in polycrystalline thin-film Cu(In,Ga)Se2
solar cells, International Journal of Photoenergy, 2010 (2010)
20. S.H. Kang, Y.K. Kim, D.S. Choi, and Y.E. Sung, Characterization of electrodeposited CuInSe2 (CIS) film, Electrochimica Acta, 51 (2006) 4433–
4438
21. F. Kessler and D. Rudmann, Technological aspects of flexible CIGS solar cells and modules, Solar Energy, 77(6) (2004) 685–695
22. F. Kang, J.P. Ao, G.Z. Sun, Q. HE, and Y. Sun, Growth and characterization of CuInSe2 thin films via one-step electrodeposition from a lactic acid/sodium lactate buffer system, Materials Chemistry and Physics, 115 (2009) 516–520
23. H.H. Chen, P.N. Kalu, and E. E. Kalu, CuInSe2 thin-film deposition on flexible plastic substrate: electrolyte recirculation rate and deposition potential effects, Journal of Solid State Electrochemistry, 14 (2010) 1013–
1020
24. Q. Huang and K. Reuter, Electrodeposition of indium on copper for CIS and CIGS solar cell applications, Journal of The Electrochemical Society, 158(2) (2011) D57–D61
25. S. Nomura, K. Nishiyama, and E. Tanaka, Preparation of CuInSe2 thin films on Mo-coated glass substrates by pulse-plated electrodeposition, Japanese Journal of Applied Physics, 37 (1998) 3233–3237
26. A. Bouraiou, M.S. Aida, A. Mosbah, and N. Attaf, Annealing time effect on the properties of CuInSe2 grown by electrodeposition using two electrodes system, Brazilian Journal of Physics, 39(3) (2009)
27. S.Y. Hu, W.H. Lee, S.C. Chang, Y.L. Cheng, and Y.L. Wang, Pulsed electrodeposition of CuInSe2 thin films onto Mo-glass substrates, Journal of the Electrochemical Society, 158(5) (2011) B557–B561
28. T. Ren, R. Yu, M. Zhong, J. Shi, and C. Li, Microstructure evolution of CuInSe2 thin films prepared by single-bath electrodeposition, Solar Energy Materials & Solar Cells, 95 (2011) 510–520
29. J. Schrier, Joshua, Demchenko, and L.W. Wang, Optical properties of ZnO/ZnS and ZnO/ZnTe heterostructures for photovoltaic applications, Nano Letters, 7(8) (2007) 2377–2382
30. X. Sun, Y. He, and J.Y. Feng, Growth and characterization of ZnIn2Se4 buffer layer on CuInSe2 thin films, Journal of Crystal Growth, 312 (2009) 48–51
31. Y. Oda, M. Matsubayashi, T. Minemoto, and H. Takakura, Fabrication of Cu(In, Ga)Se2 thin film solar cell absorbers from electrodeposited bilayers, Current Applied Physics, 10 (2010) S146–S149
32. 邱立仁, 電沉積二硒化銅銦太陽能電池之研究, 國立成功大學, 碩士論 文, 2007
33. 以電化學沉積法製備銅銦硒薄膜太陽電池之吸收層抗反射層透明導電
層與背部電極, 國立清華大學, 碩士論文, 2008
34. G. Gordillo and C. Carderon, CIS thin film solar cells with evaporated InSe buffer layers, Solar Energy Materials & Solar cells, 77 (2003) 163–173 35. 楊宏仁, 詹逸民, 透明導電層在矽薄膜太陽能電池上之應用, 機械工業
雜誌, 太陽光電製程設備技術專輯, 302 (2008)
36. A. Bouraiou, M. S. Aida, E. Tomasella and N. Attaf, ITO substrate resistivity effect on the properties of CuInSe2 deposited using two-electrode system, Journal of Materials Science, 44 (2009) 1241–1244
37. J. Rousset and D. Lincot, Low temperature electrodeposition of zinc oxide layers as transparent conducting oxide window layers for CIGS solar cells, Photovoltaic Specialists Conference, (2009) 1246–1251
38. 王湘儀, 高穿透氯及滴接觸阻抗的氧化銦鉬在 P 型氮化鎵之歐姆接觸研 究, 國立台灣大學, 碩士論文, 2006
39. 赖宇坤, 王 炜, 循环伏安法测定铁胺络合物还原强度, 电化学, 17(1) 2011
40. M.G. Kang, M.S. Kim, J. Kim, and L.J. Guo, Organic solar cells using nanoimprinted transparent metal electrodes, Advanced Materials, 20 (2008) 4408–4413
41. M.G. Kang, T. Xu, H.J. Park, X. Luo, and L.J. Guo, Efficiency enhancement of organic solar cells using transparent plasmonic Ag nanowire electrodes, Advanced Materials, 22 (2010) 4378–4383
42. 陳柏穎, 矽晶圓非等相性濕式蝕刻特性研究, 國立中山大學, 碩士論文, 2003
43. M. Jubault, L. Ribeaucourt, E. Chassaing, G. Renou, D. Lincot, And F.
Donsanti, Optimization of molybdenum thin films for electrodeposited CIGS solar cells, Solar Energy Materials and Solar Cells, 95 (2010) S26–S31 44. 廖成, 韩俊峰, 硒蒸气浓度对制备 CIGS 薄膜的影响, 物理化学学报,
27(2) (2011) 432–436
45. 方玲, Cu—In 膜成分偏析对 CIS 膜结构的影响, 清华大学学报 44(5) 2004
46. 許能傑, 黃泰錦, 濺鍍 Mo 薄膜在不同基板上之表面特性分析, Journal of China Institute of Technology, 40 (2009)
47. 李浴春, 王喜莲, InGaAs 薄膜电共沉积研究, 电化学, 6(4) (2000)
48. K. Jayadevan, Fabrication and characterization of novel 2SSS CIGS thin film solar cells for large-scale manufacturing, University of South Florida, Graduate school thesis, 2011
49. 高雅君, 錯合劑對電沉積二硒化銅銦薄膜的影響研究, 國立成功大學, 碩士論文, 2008
50. M.E. Calixto, P.J. Sebastian, R.N. Bhattacharya, and R. Noufi, Compositional and optoelectronic properties of CIS and CIGS thin films formed by electrodeposition, Solar Energy Materials & Solar Cells, 59(1–2) (1999) 75–84
51. H. Matsushita and T. Takizawa, Phase diagram of the CuIn-2Se system for CuInSe2 crystal growth by controlling Se contents, Journal of Crystal Growth, 179(3–4) (1997) 503–509
52. S.Z. El Abedin , A.Y. Saad, H.K. Farag, N. Borisenko, Q.X. Liu, and F.
Endres, Electrodeposition of selenium, indium and copper in an air and water-stable ionic liquid at variable temperatures, Electrochimica Acta , 52
(2007) 2746–2754
53. A. Kampmann, V. Sittinger, J. Rechid, and R. Reineke-Koch, Large area electrodeposition of Cu(In,Ga)Se2, Thin Solid Films, (2000) 361–362, 309–
313
54. L. Zhang, F.D. Jiang, and J.Y. Feng, Formation of CuInSe2 and Cu(In,Ga)Se2 films by electrodeposition and vacuum annealing treatment, Solar Energy Materials & Solar Cells, 80 (2003) 483–490
55. F.Y. Liu, Lv Ying, Z. Zhang, Y. Lai, J. Li, and Y. Liu, Preparation of chalcopyrite CuInSe2 thin films by pulse-plating electrodeposition and annealing treatment, Proceedings of ISES Solar World Congress , Solar Energy and Human Settlement, 4 (2007) 1316–1320
56. M. Izaki, T. Shinagawa, K. Mizuno, Y. Ida, M. Inaba, and A. Tasaka, Electrochemically constructed p-Cu2O/n-ZnO heterojunction diode for photovoltaic device, Journal of Physics D: Applied Physics, 40(11) (2007)