未來規劃

(1) 多組輸出源之設計：本論文僅探討分析雙組輸出源直-直流電源轉換器，未對多組輸 出源直-直流電源轉換器進行理論分析，故未來可對多組輸出源直-直流電源轉換器 進行理論分析及應用，來提升其進一步之實用性。圖 5-1 為應用本論文所提之分時 控制之燃料電池-鋰電池-超級電容混合電源供電系統架構圖。

(2) 電路拓樸(topology)：本論文電路拓樸係以單激磁源直-直流電源轉換器為理論基礎，

並未對雙激磁源之半橋式(half bridge)直-直流電源轉換器與及全橋式(full bridge)進 推衍分析，仍有待進專家學者持續投入研究與探討。

47

Driver 0

Driver 3

Driver 2

V

V

V

Driver 0 Driver 1 Driver3

OCC 2

OCC 1

Driver 1

DC Applications or AC with DC/AC Inverters

Battery

48

參考文獻

[1] J. W. Baek, J. G. Cho, G. H. Rim and E. S. Kim, “Passive ripple filter for zero voltage zero current switched full-bridge DC/Dc converters,” U.S. Pat, 5886884, 1999.

[2] D. Y. Lee, B. K Lee, S. B. Yoo and D. S. Hyun, “An improved full-bridge zero-voltage-transition PWM DC/DC converter with zero-voltage/zero-current switching of the auxiliary switches,” IEEE Transactions on Industry Applications, Vol. 36, No. 2, pp.

558 –566, 2000.

[3] V. T. Valtchev, A.V. D. Bossche, J. Melkebeek and D. D. Yudov, “Design considerations and loss analysis of zero-voltage switching boost converter,” IEE Proceedings-Electric Power Applications, Vol. 148, No. 11, pp. 29-33, 2001.

[4] Y. Yang and X. Weisheng, “A simplified lossless passive soft-switching snubber for PWM Half-Bridge inverters,” International Conference on Intelligent Computation Technology and Automation, pp. 3-6, 2009.

[5] H. Toda and M. Yamamoto, “1/3 weight core of a capacitor-less ARCP method three-phase voltage source soft-switching inverter suitable for EV,” IEEE Energy Conversion Congress and Exposition (ECCE), pp. 4101-4106, 2011.

[6] A. K. Rathore and U. Prasanna, “Comparison of soft-switching voltage-fed and current-fed bi-directional isolated Dc/Dc converters for fuel cell vehicles,” IEEE International Symposium on Industrial Electronics, pp. 252-257, 2012.

[7] B. J. Harry, “Voltage regulator that operates in either PWM or PFM mode,”US5568044.

1996-10-22

49

[8] F. C. Lee, P. Barbosa, Xu. Peng, J. Zhang, B. Yangand and F. Canales, “Topologies and design considerations for distributed power system applications,” IEEE Proceedings, Vol.

89, No. 6, pp. 939 –950, June 2001.

[9] H. Kifune, Y. Hatanaka and M. Nakaoka, “Cost effective phase shifted pulse modulation soft switching high frequency inverter for induction heating applications,” IEE Proceedings -Electric Power Applications, Vol. 151, No. 1, pp. 19-25, 2004 .

[10] B.Chango, C. Wang and H. Yao, “Research on Soft Switching Boost Converter,” 2011 Second International Conference on Digital Manufacturing and Automation, pp.

1015-1018, 2011.

[11] L. Yong and J. Zheng, “A low-cost adaptive multi-mode digital control solution maximizing AC/DC power supply efficiency,” IEEE Applied Power Electronics Conference and Exposition (APEC), pp. 349-354, 2010.

[12] P. Y. Chen, M. Jinno and Y. M. Shie, “Research on the reverse conduction of synchronous rectifiers,” IEEE Transactions on Industrial Electronics, Vol. 55, Issue 4, pp.1570 – 1575, 2008.

[13] F.Tourkhani and D.Vallee, “A saturable transformer based technique to rrive a synchronous rectifier,” IEEE International Symposium on Industrial Electronics, pp. 876- 881, 2006.

[14] A. Parayandeh, C. Pang and A. Prodic, “Digitally controlled low-power DC-DC converter with instantaneous on-line efficiency optimization,” IEEE Applied Power Electronics Conference and Exposition, pp. 159-163, 2009.

[15] L. J. Hang, Y. L. Gu, Z. Y.Lu and Z. M. Qian, “Multi-output LLC resonant converters with symmetrical auxiliary output structures,” 28th Annual International Telecommunications Energy Conference, pp. 1-5, 2006.

50

[16] S. A. Liang and C. P.Wu , “A new and simple structure of PC power supply with low cost and high efficiency to meet 80 plus requirement,” IEEE Applied Power Electronics Conference and Exposition, pp. 1347-1352, 2008.

[17] R. L. Lin, C. R. Pan and K. H. H Liu, “Family of single-inductor multi-output DC-DC converters,” International Conference on Power Electronics and Drive Systems, pp.1216-1221, 2009.

[18] A. Nami, F. Zare, A. Ghosh and F. Blaabjerg, “Cross voltage control with inner hysteresis current control for multi-output boost converter,” 13th European Conference on Power Electronics and Applications, pp. 1-10, 2009.

[19] J. K. Kim, S. W. Choi, C. E. Kim and G. W. Moon, “A new standby structure using multi-output full-bridge converter integrating flyback converter,” IEEE Transactions on Industrial Electronics, Vol. 58, Issue 10, pp. 4763- 4767, 2011.

[20] B. C. Kim, K. B. Park and G. W. Moon, “LLC resonant converter with asymmetric PWM for hold-up time,” IEEE 8th International Conference on Power Electronics, pp.

38-43, 2011.

[21] B. C. Hyeo and B. H. Cho, “Multiple output of dual half bridge LLC resonant converter using PFM-PD control,” IEEE Energy Conversion Congress and Exposition, pp.

1133-1140, 2009.

[22] M. G. L. Roes, J. L. Duarte and M. A. M. Hendrix, “Disturbance observer-based control of a dual output LLC converter for solid state lighting applications,” International Power Electronics Conference, pp. 1042-1049, 2010.

[23] Y. Chen, X. Wu, Z. Qian and W. Zhang, “Design and optimization of a wide output voltage range LED driver based on LLC resonant topology,” IEEE 8th International Conference on Power Electronics, pp. 2831-2837, 2011.

51

[24] M. Belloni, E. Bonizzoni, E. Kiseliovas, P. Malcovati, F. Maloberti, T. Peltola and T.

Teppo, “A 1.2A output current single-inductor 4-Outputs DC-DC buck converter with self-boosted switch drivers”, IEEE International Solid-State Circuits Conf. (ISSCC) Dig.

Tech. Papers, pp. 444–626, Feb. 2008.

[25] J. J. Lee and B. H. Kwon, “DC-DC converter using a multiple-coupled inductor for low output voltages,” IEEE Transactions on Power Electronics, vol. 54, no. 1, pp. 467-478, 2007.

[26] A. F. Witulski, “Modeling and design of transformers and coupled inductors,” IEEE APEC’93, pp. 589-595, 1993.

[27] D. Maksimovic, R. Erickson and C. Griesbach, “Modeling of cross-regulation in converters containing coupled inductors,” IEEE Transactions on Power Electronics, vol.

15, no. 4, pp. 607-615, 2000.

[28] Y. Nojiri, I. Ohyama, T. Negome, T. Zaitsu, T. Ninomiyal and M. Shoyama, “Stability analysis of multiple-output DC-DC converters with cross and precise regulations,” IEEE PESC’98, pp. 347-379, 1998.

[29] L. J. Hang, Y. L. Gu, Z. Y. Lu, Z. M. Qian and D. H. Xu, “Magamp post regulation for LLC series resonant converter with multi-output,” IEEE IECON’05, pp. 628-632, 2005.

[30] H. Behjati and A. Davoudi, “A Multiple-Input Multiple-Output DC–DC Converter,”

IEEE Transactions on Industry Applications, , vol. 49, no. 3, pp. 1464 -1479, 2013.

[31] C. Jamerson and D. Y. Chen, “Magamp postregulators for symmetrical topologies with emphasis on half-bridge configuration,” IEEE Transactions on Power Electronics, vol. 8, no. 1, pp. 26-29, 1993.

52

[32] A. Ferreres, J. A. Carrasco, E. Sanchis, J. M. Espi and E. Maset, “Application of a novel parallel regulation technique in a two output forward converter,” IEEE PESC’99, pp.

914-919, 1999.

[33] A. Ferreres, J. A. Carrasco, E. Maset and J. B. Ejea, “Small-signal modeling of a controlled transformer parallel regulator as a multiple output converter high efficient post-regulator,” IEEE Transactions on Power Electronics, vol. 19, no. 1, pp. 183-191, 2004.

[34] N. Mohan, T. M. Undeland and W. P. Robbins, “Power Electronics: Converters, Applications, and Design,” 3rd Edition, ISBN: 978-0-471-22693-2 , John Wiley& Sons, New York, 2003.

[35] Y. T. Yau, K. I. Hwu and Y. S. Chou, “Forward converters using a CPLD-based control technique to obtain a fast transient load response,” IEEE PEDS’03, pp. 359-364, 2003.

[36] https://powersimtech.com/products/psim/