第五章 結論與未來展望
5.2 未來展望
參考文獻
5. D. M. Rowe, "Development of improved modules for the economic recovery of low temperature waste heat", IEEE, 16th International Conference on Thermoelectrics, pp.532-538 (1997).
6. D. M. Rowe and G. Min, "Evaluation of thermoelectric modules for power generation", Journal of Power Source, Vol. 73, pp. 193-198 (1998).
7. T. Kajikawa and T. Onishi, "Development for advanced thermoelectric conversion system", 2007 International Conference on Thermoelectrics, pp.
322-330 (2007).
8. J. C. Bass, N. B. Elsner, and F. A. Leavitt, "Performance of the 1 kW thermoelectric generator for diesel engines", 14th International Conference on Thermoelectrics, (1994).
9. http://www.hi-z.com/
10. K. Ikoma, M. Munekiyo, K. Furuya, M. Kobayashi, T. Izumi, and K.
Shinohara, "Thermoelectric module and generator for gasoline engine vehicle", IEEE, 17th International Conference on Thermoelectric, pp.
464-474 (1998).
11. 李進興 等人, "車輛引擎廢熱回收電力再生系統發展趨勢", 中華民國燃 燒學會季刊, Vol. 18, No.3, pp. 24-31 (2009).
12. J. LaGrandeur, D. Crane, S. Mazar, and A. Eder, "Automotive waste heat conversion to electric power using skutterudite, TAGS, PbTe and BiTe", 2006 International Conference on Thermoelectrics, pp. 343-348 (2006).
13. T. Caillat, J. P. Fleurial, G. J. Snyder, and A. Borshchevsky, "Development of high efficiency segmented thermoelectric unicouples", 20th International Conference on Thermoelectrics, pp. 282-285 (2001).
14. S. Sampath, "Thermal spray applications in electronicsand sensors: past, present, and future", Journal of Thermal Spray Technology, Vol. 19, pp.
921-949 (2010).
15. L. Zuo, J. Longtin, S. Sampath, B. Li, and Q. Li, "NSF-DOE TE partnership:Integrated design and manufacturing of cost-effective &
industrial-scalable TEG for vehicle applications", 2011 DOE Thermoelectrics Workshop, (2011).
16. 蔡永明, "網版製版印刷實務", 貝星貿易股份有限公司, (1997).
17. A. del Campo, and C. Greiner, "SU-8：a photoresist for high-aspect-ratio and 3D submicron lithography", Journal of Micromechanics and Microengineering, Vol. 17, pp. 81-95 (2007).
18. D. M. Rowe, "Thermoelectrics handbook macro to nano", (2006).
19. D. J. Yao, "In-plane MEMS thermoelectric microcooler", Ph. D. dissertation of UCLA, USA, (2001).
20. http://www.thermoelectrics.caltech.edu/
merit for AlInN alloys with various In-contents", Journal of Electronic Materials, Vol. 109, 053706 (2011).
23. Y. Zhang, M. S. Dresselhaus, Y. Shi, Z. Ren, and G. Chen, "High Thermoelectric Figure-of-Merit in Kondo Insulator Nanowires at Low Temperatures", Nano Lett. 2011, 11, pp. 1166-1170 (2011).
24. A. Borshchevsky, "Handbook of thermoelectrics", (1995).
25. D. B. Hyun, J. S. Hwang, B. C. You, T. S. Oh, and C. W. Hwang,
"Thermoelectric properties of the n-type 85 % Bi2Te3-15 % Bi2Se3 alloys doped with Sbl3 and CuBr", Journal of Materials Science, Vol. 33, pp.5595-5600 (1998).
26. T. S. Oh, D. B. Hyun, and N. V. Kolomoets, "Thermoelectric properties of the hot-pressed (Bi,Sb)2(Te,Se)3 alloys", Scripta Materialia, Vol. 42, pp.
849-854 (2000).
27. O. Yamashita, S. Tomiyoshi, and K. Makita, "Bismuth telluride compounds with high thermoelectric figures of merit", Journal of Electronic Materials, Vol. 93, pp. 368-374 (2003).
28. http://people.deas.harvard.edu/
29. L. D. Ivanova, Y. V. Granatkina, and N. V. Polikarpova, "Properties of single-crystal in the Sb2Te3-Bi2Te3 solid solution system", Inorganic Materials, Vol. 31, pp.678-681 (1995).
30. L. D. Ivanova, S. A. Brovikova, H. Sussmann, and P. Reinshaus, "Effect of growth-conditions on the homogeneity of Bi0.5Sb1.5Te3 single-crystals", Inorganic Materials, Vol. 31, pp. 682-686 (1995).
31. L. D. Ivanova, Y. V. Granatkina, N. V. Polikarpova, and E. I. Smirnova,
"Selenium-doped Sb2Te3-Bi2Te3 crystals", Inorganic Materials, Vol. 33, pp.
558-561 (1997).
32. J. Jiang, L. Chen, S. Bai, Q. Yao, and Q. Wang, "Thermoelectric properties of p-type (Bi2Te3)x(Sb2Te3)1-x crystals prepared via zone melting", Journal of Crystal Growth, Vol. 277, pp. 258-263 (2005).
33. http://www.dynacer.com/
34. H. C. Kim, S. K. Lee, T. S. Oh, and D. B. Hyun, "Thermoelectric properties of the hot-pressed Bi2(Te, Se)3 alloys with the Bi2Se3 content and addition of scattering center", IEEE, 17th International Conference on Thermoelectric, pp.
174-177 (1998).
35. D. B. Hyun, J. S. Hwang, J. D. Shim, and T. S. Oh, "Thermoelectric properties of (Bi0.25Sb0.75)2Te3 alloys fabricated by hot-pressing method", Journal of Materials Science, Vol. 36, No. 5, pp. 1285-1291 (2001).
36. http://www.hardwaresource.com
37. J. Seo, C. Lee, and K. Park, "Thermoelectric properties of n-type SbI3-doped Bi2Te2.85Se0.15 compound fabricated by hot pressing and hot extrusion", Journal of Materials Science Letters, Vol. 35, pp. 1549-1554 (2000).
38. J. Seo, D. Lee, C. Lee, and K. Park, "Microstructure, mechanical properties and thermoelectric properties of p-type Te-doped Bi0.5Sb1.5Te3 compounds fabricated by hot extrusion", Journal of Materials Science Letters, Vol. 16, pp. 1153-1156 (1997).
39. http://www.shi.co.jp/
power generator", Journal of Power Sources, Vol. 175, pp. 909-913 (2008).
42. J. P. Carmo, L. M. Goncalves, R. F. Wolffenbuttel, and J. H. Correia, "A planar thermoelectric power generator for integration in wearable microsystems", Sensors and Actuators A: Physical, Vol. 161, pp. 199-204 (2010).
43. 伍秀菁 等人, "真空技術與應用", 儀器科技研究中心, (2001).
44. D. H. Kim, E. Byon, G. H. Lee, and S. Cho, "Effect of deposition temperature on the structural and thermoelectric properties of bismuth telluride thin films grown by co-sputtering", Thin Solid Films, Vol. 510, pp.
148-153 (2006).
45. S. D. Kwon, B. K. Ju, S. J. Yoon, and J. S. Kim, "Fabrication of Bismuth Telluride-Based Alloy Thin Film Thermoelectric Devices Grown by Metal Organic Chemical Vapor Deposition", Journal of Electronic Materials, Vol.
38, pp. 920-924 (2009).
46. G. Leimkűhler, I. Kerkamm, and R. R. Koch, "Electrodeposition of antimony telluride", Journal of The Electrochemical Society, Vol. 149, pp. 474-478 (2002).
47. E. Schwyter, W. Glatz, L. Durrer, and C. Hierold, "Flexible Micro Thermoelectric Generator based on Electroplated Bi2+xTe3-x", DPIP of MEMS/MOEMS, pp. 9-11 (2008).
48. http://www.materialsnet.com.tw/
49. J. Weber, K. P. Kamloth, F. Haase, P. Detemple, F. Völklein, and T. Doll,
"Coin-size coiled-up polymer foil thermoelectric power generator for wearable electronics", Sensors and Actuators A, Vol. 132, pp. 325-330 (2006).
50. J. Wüsten and P. K. Karin, "Organic thermogenerators for energy autarkic systems on flexible substrates", Journal of Physics D: Applied Physics, Vol.
41, 135113 (2008).
51. P. Markowski, A. Dziedzic, "Planar and three-dimensional thick-film thermoelectric microgenerators", Microelectronics Reliability, Vol. 48, pp.
890-896 (2008).
52. C. Navone, M. Soulier, M. Plissonnier, and A. L. Seiler, "Development of (Bi,Sb)2(Te,Se)3-Based Thermoelectric Modules by a Screen-Printing Process ", Journal of Electronic Materials, Vol. 39, pp. 1755-1761 (2010).
53. H. B. Lee, J. H. We, H. J. Yang, K. Kim, K. C. Choi, B. J. Cho,
"Thermoelectric properties of screen-printed ZnSb film", Thin Solid Films, Vol. 519, pp. 5441-5443 (2011).
54. H. B. Lee, H. J. Yang, J. H. We, K. Kim, K. C. Choi, B. J. Cho, "Thin-Film Thermoelectric Module for Power Generator Applications Using a Screen-Printing Method", Journal of Electronic Materials, Vol. 40, pp.
615-619 (2011).
55. D. Madan, A. Chen, P. K. Wright, and J. W. Evans, "Dispenser printed composite thermoelectric thick films for thermoelectric generator applications", Journal of Electronic Materials, Vol. 109, 034904 (2011).
56. D. Madan, A. Chen, P. K. Wright, and J. W. Evans, "Dispenser-printed planar thick-film thermoelectric energy generators", Journal of