IMITATION JEWELLERY; COIN
IV. OTHER ALLOY STEEL; HOLLOW DRILL BARS AND RODS, OF ALLOY
0.2 毫米的鋁箔（無論是否印 面或用紙、紙板、塑膠或類似
公斤 - - - Of a thickness of 0.3 mm or more but not exceeding 0.36 mm
KGM exceeding 0.35 mm
KGM
7606 1241 ﹣﹣﹣ 厚度超過 0.35 毫米，
但不超過 4 毫米，鋁 合金塑料複合原料製
公斤 - - - Of a thickness exceeding 0.35 mm but not exceeding 4 mm, of aluminium alloy plastic composite material exceeding 4 mm, other
KGM
Aluminium foil (whether or not printed or backed with paper, paperboard, plastics or similar backing materials) of a thickness (excluding any backing) not exceeding 0.2 mm
﹣ 無襯背： - Not backed:
公斤 Aluminium tube or pipe fittings (for example,
couplings, elbows, sleeves) KGM
7610 鋁質結構物（不包括項目9406
Aluminium structures (excluding prefabricated buildings of heading 9406) and parts of structures (for example, bridges and bridge-sections, towers, lattice masts, roofs, roofing frameworks, doors and windows and their frames and thresholds for doors, balustrades, pillars and columns); aluminium plates, rods, profiles, tubes and the like, prepared for use in structures
7610 1000 ﹣ 門、窗、門框、窗框及門檻 公斤 - Doors, windows and their frames and thresholds
for doors KGM
7610 9000 ﹣ 其他 公斤 - Other KGM
Heading HKHS code quantity
公斤 Aluminium reservoirs, tanks, vats and similar containers, for any material (other than compressed or liquefied gas), of a capacity exceeding 300 l, whether or not lined or heat-insulated, but not fitted with mechanical or thermal equipment
Aluminium casks, drums, cans, boxes and similar containers (including rigid or collapsible tubular containers), for any material (other than compressed or liquefied gas), of a capacity not exceeding 300 l, whether or not lined or heat-insulated, but not fitted with mechanical or thermal equipment
7612 1000 ﹣ 軟質的筒形容器 公斤 - Collapsible tubular containers KGM
7612 9000 ﹣ 其他 公斤 - Other KGM
7613 7613 0000 儲存壓縮氣體或液化氣體的
鋁容器
公斤 Aluminium containers for compressed or
liquefied gas KGM
7614 非絕緣的絞股鋁線、鋁纜、編
帶及類似物
Stranded wire, cables, plaited bands and the like, of aluminium, not electrically insulated
7614 1000 ﹣ 鋼芯 公斤 - With steel core KGM
Table, kitchen or other household articles and parts thereof, of aluminium; pot scourers and scouring or polishing pads, gloves and the like, of aluminium; sanitary ware and parts thereof, of aluminium
﹣ 餐桌、廚房或其他家庭用品 及其零件；鍋子洗刷器、洗 擦或磨光墊、手套及類似 物︰
- Table, kitchen or other household articles and parts thereof; pot scourers and scouring or polishing pads, gloves and the like:
7615 1010 ﹣﹣﹣ 鍋子洗刷器、洗擦或磨
公斤 - - - Kitchen articles and parts thereof, enamelled or glazed or containing non-stick interior finishes enamelled or glazed and not containing non-stick interior finishes
KGM
7615 1090 ﹣﹣﹣ 其他 公斤 - - - Other KGM
7615 2000 ﹣ 潔具及其零件 公斤 - Sanitary ware and parts thereof KGM
7616 其他鋁製品 Other articles of aluminium
﹣ 釘、平頭釘、肘釘（項目 8305 內的除外）、螺絲釘、
螺絲栓、螺絲帽、螺絲、
鉚釘、制銷、開尾銷、墊圈 及類似製品：
- Nails, tacks, staples (other than those of heading 8305), screws, bolts, nuts, screw hooks, rivets, cotters, cotter-pins, washers and similar articles:
7616 1010 ﹣﹣﹣ 釘、平頭釘及肘釘（項 cotter-pins, washers and similar articles KGM
項目 Heading
港貨協制編號
HKHS code 貨物名稱 數量單位 Description Unit of
quantity
﹣ 其他︰ - Other:
7616 9100 ﹣﹣ 布、格柵、網及圍籬，鋁 線製
公斤 - - Cloth, grill, netting and fencing, of aluminium wire
KGM
﹣﹣ 其他︰ - - Other:
7616 9910 ﹣﹣﹣ 網眼金屬 公斤 - - - Expanded metal KGM
7616 9920 ﹣﹣﹣ 活動百葉簾 － - - - Venetian blinds -
7616 9990 ﹣﹣﹣ 其他 － - - - Other -
第七十七章 Chapter 77
（保留為協調制度將來所用） (Reserved for possible future use in the Harmonized System)
鉛及其製品 Lead and articles thereof
註釋 Note
1. 在本章內，下列名詞作如下解釋︰ 1. In this Chapter the following expressions have the meanings hereby assigned to them:
（a） 棒及杆 (a) Bars and rods
Rolled, extruded, drawn or forged products, not in coils, which have a uniform solid cross-section along their whole length in the shape of circles, ovals, rectangles (including squares), equilateral triangles or regular convex polygons (including
‘flattened circles’ and ‘modified rectangles’, of which two opposite sides are convex arcs, the other two sides being straight, of equal length and parallel). Products with a rectangular (including square), triangular or polygonal cross-section may have corners rounded along their whole length. The thickness of such products which have a rectangular (including ‘modified rectangular’) cross-section exceeds one-tenth of the width. The expression also covers cast or sintered products, of the same forms and dimensions, which have been subsequently worked after production (otherwise than by simple trimming or de-scaling), provided that they have not thereby assumed the character of articles or products of other headings.
（b） 型材 (b) Profiles
Rolled, extruded, drawn, forged or formed products, coiled or not, of a uniform cross-section along their whole length, which do not conform to any of the definitions of bars, rods, wire, plates, sheets, strip, foil, tubes or pipes. The expression also covers cast or sintered products, of the same forms, which have been subsequently worked after production (otherwise than by simple trimming or de-scaling), provided that they have not thereby assumed the character of articles or products of other headings.
Rolled, extruded or drawn products, in coils, which have a uniform solid cross-section along their whole length in the shape of circles, ovals, rectangles (including squares), equilateral triangles or regular convex polygons (including
‘flattened circles’ and ‘modified rectangles’, of which two opposite sides are convex arcs, the other two sides being straight, of equal length and parallel). Products with a rectangular (including square), triangular or polygonal cross-section may have corners rounded along their whole length. The thickness of such products which have a rectangular (including ‘modified rectangular’) cross-section exceeds one-tenth of the width.
（d） 板、片、帶及箔 (d) Plates, sheets, strip and foil
Flat-surfaced products (other than the unwrought products of heading 7801), coiled or not, of solid rectangular (other than square) cross-section with or without rounded corners (including ‘modified rectangles’ of which two opposite sides are convex arcs, the other two sides being straight, of equal length and parallel) of a uniform thickness, which are:
﹣ 如成長方形（包括正方形），其厚度 不超過闊度的十分之一，
- of rectangular (including square) shape with a thickness not exceeding one-tenth of the width,
﹣ 成長方形及正方形以外形狀，尺寸方 面並無規定，但以這些產品不會具有 其他項目內所列製品或產品的特性 為限。
- of a shape other than rectangular or square, of any size, provided that they do not assume the character of articles or products of other headings.
項目 7804 適用於具有花紋圖案（例如槽 紋、棱紋、方格圖紋、淚紋、鈕紋、菱形 花紋）的板、片、帶及箔，同時亦包括經 穿孔、起瓦楞、打磨或塗層的產品，但以 這些產品不會具有其他項目內所列製品或 產品的特性為限。
Heading 7804 applies, inter alia, to plates, sheets, strip and foil with patterns (for example, grooves, ribs, chequers, tears, buttons, lozenges) and to such products which have been perforated, corrugated, polished or coated, provided that they do not thereby assume the character of articles or products of other headings.
（e） 管 (e) Tubes and pipes
經捲繞或未經捲繞的空心產品，其全長橫 截面形狀劃一。中間只有一空間，成圓 形、橢圓形、長方形（包括正方形）、等 邊三角形或規則凸面多邊形，而管壁厚度 均勻。橫截面成長方形（包括正方形）、
等邊三角形或規則凸面多邊形，而其全長 角邊可經磨圓的產品，亦視作管，但其內 橫截面及外橫截面必須同心、同形及同方 位。橫截面成上述形狀的管可經打磨、塗 層、彎曲、成螺紋、鑽孔、縮腰、擴張、
成錐形或配有凸緣（法蘭）、環或圈等。
Hollow products, coiled or not, which have a uniform cross-section with only one enclosed void along their whole length in the shape of circles, ovals, rectangles (including squares), equilateral triangles or regular convex polygons, and which have a uniform wall thickness. Products with a rectangular (including square), equilateral triangular or regular convex polygonal cross-section, which may have corners rounded along their whole length, are also to be considered as tubes and pipes provided the inner and outer cross-sections are concentric and have the same form and orientation. Tubes and pipes of the foregoing cross-sections may be polished, coated, bent, threaded, drilled, waisted, expanded, cone-shaped or fitted with flanges, collars or rings.
分項註釋 Subheading Note
1. 在本章內，「精煉鉛」一詞指︰ 1. In this Chapter the expression ‘refined lead’ means:
以重量計，含鉛量最少達99.9% 的金屬，而其他元 素含量不得超過下列附表所指定的限量︰
Metal containing by weight at least 99.9% of lead, provided that the content by weight of any other element does not exceed the limit specified in the following table:
附表－其他元素 TABLE - Other elements
以重量計，含量的限定百分率
元 素 Element
Limiting content % by weight
Ag 銀 Silver 0.02
As 砷 Arsenic 0.005
Bi 鉍 Bismuth 0.05
Ca 鈣 Calcium 0.002
Cd 鎘 Cadmium 0.002
Cu 銅 Copper 0.08
Fe 鐵 Iron 0.002
S 硫（磺） Sulphur 0.002
Sb 銻 Antimony 0.005
Sn 錫 Tin 0.005
Zn 鋅 Zinc 0.002
其他元素（例如碲），每種 Other (for example, Te), each 0.001
項目 Heading
港貨協制編號
HKHS code 貨物名稱 數量單位 Description Unit of
quantity
7801 未鍛造的鉛 Unwrought lead
7801 1000 ﹣ 精煉鉛 公斤 - Refined lead KGM
﹣ 其他︰ - Other:
7801 9100 ﹣﹣ 以重量計含其他元素以 銻為主
公斤 - - Containing by weight antimony as the principal
other element KGM
7801 9900 ﹣﹣ 其他 公斤 - - Other KGM
7802 7802 0000 鉛廢料及碎料 公斤 Lead waste and scrap KGM
7804 鉛板、鉛片、鉛帶及鉛箔；鉛
粉及鉛薄片
Lead plates, sheets, strip and foil; lead powders and flakes
﹣ 板、片、帶及箔︰ - Plates, sheets, strip and foil:
Heading HKHS code quantity 7804 1100 ﹣﹣ 厚度（任何襯背除外）不
超過0.2 毫米的鉛片、帶 及箔
公斤 - - Sheets, strip and foil of a thickness (excluding any backing) not exceeding 0.2 mm KGM
7804 1900 ﹣﹣ 其他 公斤 - - Other KGM
7804 2000 ﹣ 粉末及薄片 公斤 - Powders and flakes KGM
7806 7806 0000 其他鉛製品 － Other articles of lead -
第七十九章 Chapter 79
鋅及其製品 Zinc and articles thereof
註釋 Note
1. 在本章內，下列名詞作如下解釋︰ 1. In this Chapter the following expressions have the meanings hereby assigned to them:
（a） 棒及杆 (a) Bars and rods
Rolled, extruded, drawn or forged products, not in coils, which have a uniform solid cross-section along their whole length in the shape of circles, ovals, rectangles (including squares), equilateral triangles or regular convex polygons (including
‘flattened circles’ and ‘modified rectangles’, of which two opposite sides are convex arcs, the other two sides being straight, of equal length and parallel). Products with a rectangular (including square), triangular or polygonal cross-section may have corners rounded along their whole length. The thickness of such products which have a rectangular (including ‘modified rectangular’) cross-section exceeds one-tenth of the width. The expression also covers cast or sintered products, of the same forms and dimensions, which have been subsequently worked after production (otherwise than by simple trimming or de-scaling), provided that they have not thereby assumed the character of articles or products of other headings.
（b） 型材 (b) Profiles
Rolled, extruded, drawn, forged or formed products, coiled or not, of a uniform cross-section along their whole length, which do not conform to any of the definitions of bars, rods, wire, plates, sheets, strip, foil, tubes or pipes. The expression also covers cast or sintered products, of the same forms, which have been subsequently worked after production (otherwise than by simple trimming or de-scaling), provided that they have not thereby assumed the character of articles or products of other headings.
Rolled, extruded or drawn products, in coils, which have a uniform solid cross-section along their whole length in the shape of circles, ovals, rectangles (including squares), equilateral triangles or regular convex polygons (including
‘flattened circles’ and ‘modified rectangles’, of which two opposite sides are convex arcs, the other two sides being straight, of equal length and parallel). Products with a rectangular (including square), triangular or polygonal cross-section may have corners rounded along their whole length. The thickness of such products which have a rectangular (including ‘modified rectangular’) cross-section exceeds one-tenth of the width.
（d） 板、片、帶及箔 (d) Plates, sheets, strip and foil
Flat-surfaced products (other than the unwrought products of heading 7901), coiled or not, of solid rectangular (other than square) cross-section with or without rounded corners (including ‘modified rectangles’ of which two opposite sides are convex arcs, the other two sides being straight, of equal length and parallel) of a uniform thickness, which are:
﹣ 如成長方形（包括正方形），其厚度 不超過闊度的十分之一，
- of rectangular (including square) shape with a thickness not exceeding one-tenth of the width,
﹣ 成長方形及正方形以外形狀，尺寸方 面並無規定，但以這些產品不會具有 其他項目內所列製品或產品的特性 為限。
- of a shape other than rectangular or square, of any size, provided that they do not assume the character of articles or products of other headings.
項目 7905 適用於具有花紋圖案（例如槽
Heading 7905 applies, inter alia, to plates, sheets, strip and foil with patterns (for example, grooves, ribs, chequers, tears, buttons, lozenges) and to such products which have been perforated, corrugated, polished or coated, provided that they do not thereby assume the character of articles or products of other headings.
Hollow products, coiled or not, which have a uniform cross-section with only one enclosed void along their whole length in the shape of circles, ovals, rectangles (including squares), equilateral triangles or regular convex polygons, and which have a uniform wall thickness. Products with a rectangular (including square), equilateral triangular or regular convex polygonal cross-section, which may have corners rounded along their whole length, are also to be considered as tubes and pipes provided the inner and outer cross-sections are concentric and have the same form and orientation. Tubes and pipes of the foregoing cross-sections may be polished, coated, bent, threaded, drilled, waisted, expanded, cone-shaped or fitted with flanges, collars or rings.
分項註釋 Subheading Note
1. 在本章內，下列名詞作如下解釋︰ 1. In this Chapter the following expressions have the meanings hereby assigned to them:
（a） 鋅，非合金 (a) Zinc, not alloyed
以重量計，含鋅量最少達97.5% 的金屬。 Metal containing by weight at least 97.5% of zinc.
（b） 鋅合金 (b) Zinc alloys
以重量計，含鋅量較其他各種元素含量為 重的金屬物質，而其他元素總含量須超過 2.5%。
Metallic substances in which zinc predominates by weight over each of the other elements, provided that the total content by weight of such other elements exceeds 2.5%.
（c） 鋅塵 (c) Zinc dust
由冷凝氣化鋅而得的鋅塵，所含球狀微粒 比鋅粉細小。以重量計，微粒80% 以上可
通過孔眼 63 微米的篩格，並以重量計最
少須含85% 的金屬鋅。
Dust obtained by condensation of zinc vapour, consisting of spherical particles which are finer than zinc powders. At least 80% by weight of the particles pass through a sieve with 63 micrometres (microns) mesh. It must contain at least 85% by weight of metallic zinc.
項目
Heading HKHS code quantity
錫及其製品 Tin and articles thereof
註釋 Note
1. 在本章內，下列名詞作如下解釋︰ 1. In this Chapter the following expressions have the meanings hereby assigned to them:
（a） 棒及杆 (a) Bars and rods
Rolled, extruded, drawn or forged products, not in coils, which have a uniform solid cross-section along their whole length in the shape of circles, ovals, rectangles (including squares), equilateral triangles or regular convex polygons (including
‘flattened circles’ and ‘modified rectangles’, of which two opposite sides are convex arcs, the other two sides being straight, of equal length and parallel). Products with a rectangular (including square), triangular or polygonal cross-section may have corners rounded along their whole length. The thickness of such products which have a rectangular (including ‘modified rectangular’) cross-section exceeds one-tenth of the width. The expression also covers cast or sintered products, of the same forms and dimensions, which have been subsequently worked after production (otherwise than by simple trimming or de-scaling), provided that they have not thereby assumed the character of articles or
‘flattened circles’ and ‘modified rectangles’, of which two opposite sides are convex arcs, the other two sides being straight, of equal length and parallel). Products with a rectangular (including square), triangular or polygonal cross-section may have corners rounded along their whole length. The thickness of such products which have a rectangular (including ‘modified rectangular’) cross-section exceeds one-tenth of the width. The expression also covers cast or sintered products, of the same forms and dimensions, which have been subsequently worked after production (otherwise than by simple trimming or de-scaling), provided that they have not thereby assumed the character of articles or