研究做出來的白光 CIE1931 座標位於(0.3339,0.3192)，後續再利用改 變工作電流(10-50mA )得到對應之色溫隨電流提升而下降，相反的演
第二部分的實驗為以光聚合製程製作出鈣鈦礦(Perovskite)量子 點有機發光薄膜，以及使用 CdSe/ZnS 與鈣鈦礦(Perovskite)量子點製 備白光 LED，綜合本研究之結果如下:
1. 利用光譜儀來對本實驗製備之白光 LED 進行量測，可以得到目前本 研究做出來的白光 CIE1931 座標位於(0.3216,0.3237)，後續再利用改 變工作電流(10-50mA )得到對應之色溫變化不大，但是演色性指數 CRI 的數值則隨電流提升而下降，推測是當工作電流密度增加時，藍 光 LED 發光強度也會跟著增強，促使鈣鈦礦(Perovskite)量子點產生 降解，導致鈣鈦礦(Perovskite)量子點之發光效率下降，使得 CRI 值隨 之下降。接著對合成之白光 LED 作時效性測試可得知，鈣鈦礦 (Perovskite)量子點在白光 LED 中，隨著使用時間的增加會產生降解 的現象，原因是鈣鈦礦(Perovskite)量子點若接受到藍光的照射變會開 鈦礦(Perovskite)量子點的與純高分子的 5%分解溫度分別為 212.2℃
與 287.6℃，純高分子很明顯高出許多，配合 DTG 分析可得知有加入 鈣鈦礦(Perovskite)量子點較純高分子分解速率還要高，所以可得知有 加入鈣鈦礦(Perovskite)量子點會使本研究開發出來的高分子熱性質 表現下降。
第三部分的實驗為探討加入甲基三甲氧基矽烷壓克力單體(6070)對 附著力之影響，將配置好的高分子單體和量子點再分別加入不同重量百 分比之甲基三甲氧基矽烷壓克力單體(6070)之混合物滴滿塑膠基板，以 大小 2 cm 2 cm 來製作試片，經過旋鍍後進行光聚合反應得到一有 機發光薄膜，利用萬能材料試驗機對其做正向拉拔力之量測，綜合本研 究之結果如下:
利用萬能材料試驗機對其做正向拉拔力之量測，可以得到可以觀察 到隨著甲基三甲氧基矽烷壓克力單體(6070)添加的量上升，相對應正向 拉拔力有提高的現象，然而添加甲基三甲氧基矽烷壓克力單體(6070)的 量過多，相對應正向拉拔力沒有繼續往上提升反而下降。
參考文獻
[1] 葉翰政, 量子點發光二極體之發展現況. 工業材料雜誌, 2014. 330 期.
[2] Tehfe, M., F. Louradour, J. Lalevée, and J.-P. Fouassier, Photopolymerization Reactions: On the Way to a Green and Sustainable Chemistry. Applied Sciences, 2013. 3(2): p. 490.
[3] Hoyle, C.E. and J.F. Kinstle, Radiation Curing of Polymeric Materials.
ACS Symposium Series. Vol. 417. 1990: American Chemical Society.
588.
[4] Dominik, V. and B.-K. Christopher, Photoinitiators for Polymer Synthesis. Scope, Reactivity, and Efficiency. By Jean-Pierre Fouassier and Jacques Lalavée. Angewandte Chemie International Edition, 2013.
52(12): p. 3312-3312.
[5] 李國昶、李裕正、吳懿麟, 量子點發光元件與顯示技術的應用. 工業 材料雜誌, 2016. 354 期.
[6] Kim, T.-H., D.-Y. Chung, J. Ku, I. Song, S. Sul, D.-H. Kim, K.-S. Cho, B.L. Choi, J. Min Kim, S. Hwang, and K. Kim, Heterogeneous stacking of nanodot monolayers by dry pick-and-place transfer and its applications in quantum dot light-emitting diodes. Nature Communications, 2013. 4: p. 2637.
[7] 陳學仕, 「量子點簡介」. 化工資訊與商情 2004 年 9 月. 36 期.
[8] 張立德、牟季美, 奈米材料和奈米結構，. 滄海書局, 2002.
[9] Peter, R., P. Myriam, and L. Liang, Core/Shell Semiconductor Nanocrystals. Small, 2009. 5(2): p. 154-168.
[10] Alivisatos, A.P., Semiconductor Clusters, Nanocrystals, and Quantum Dots. Science, 1996. 271(5251): p. 933-937.
[11] 陳學仕, 量子點技術與應用發展 ，奈米技術產業資訊, 2014. 第 3 期.
[12] Hung-Chia, W., B. Zhen, T. Hsin-Yu, T. An-Cih, and L. Ru-Shi, Perovskite Quantum Dots and Their Application in Light-Emitting Diodes. Small, 2018. 14(1): p. 1702433.
[13] Dirin, D.N., L. Protesescu, D. Trummer, I.V. Kochetygov, S. Yakunin, F.
Krumeich, N.P. Stadie, and M.V. Kovalenko, Harnessing Defect-Tolerance at the Nanoscale: Highly Luminescent Lead Halide Perovskite Nanocrystals in Mesoporous Silica Matrixes. Nano Letters, 2016. 16(9): p. 5866-5874.
[14] Huang, S., Z. Li, B. Wang, N. Zhu, C. Zhang, L. Kong, Q. Zhang, A.
Shan, and L. Li, Morphology Evolution and Degradation of CsPbBr3 Nanocrystals under Blue Light-Emitting Diode Illumination. ACS Applied Materials & Interfaces, 2017. 9(8): p. 7249-7258.
[15] Murray, C.B., D.J. Norris, and M.G. Bawendi, Synthesis and characterization of nearly monodisperse CdE (E = sulfur, selenium, tellurium) semiconductor nanocrystallites. Journal of the American Chemical Society, 1993. 115(19): p. 8706-8715.
[16] Peng, Z.A. and X. Peng, Formation of High-Quality CdTe, CdSe, and CdS Nanocrystals Using CdO as Precursor. Journal of the American Chemical Society, 2001. 123(1): p. 183-184.
[17] Qu, L., Z.A. Peng, and X. Peng, Alternative Routes toward High Quality CdSe Nanocrystals. Nano Letters, 2001. 1(6): p. 333-337.
[18] Dabbousi, B.O., J. Rodriguez-Viejo, F.V. Mikulec, J.R. Heine, H.
Mattoussi, R. Ober, K.F. Jensen, and M.G. Bawendi, (CdSe)ZnS Core−Shell Quantum Dots: Synthesis and Characterization of a Size Series of Highly Luminescent Nanocrystallites. The Journal of Physical Chemistry B, 1997. 101(46): p. 9463-9475.
[19] Dickinson, M., Quantum dots in your TV! Sciblogs, 2015.
[20] 曲建仲, 量子電腦還沒譜，量子點電視先來湊熱鬧──解構 LCD、
OLED 與量子點基本原理. 科技新報, 2017.
[21] 劉如熹, 發光二極體用氧氮螢光粉介紹. 全華圖書, 2006.
[22] Xie, B., R. Hu, and X. Luo, Quantum Dots-Converted Light-Emitting Diodes Packaging for Lighting and Display: Status and Perspectives.
Journal of Electronic Packaging, 2016. 138(2): p. 020803-020803-13.
[23] Schubert, E.F., Light-emitting diodes, second edition. 2006. 1-422.
[24] 張詒安, 發光二極體（LED）－白光二極體的發展. 科學研習, 2014.
No. 53-5: p. 14-19.
[25] Kumar, R.N., L.Y. Keem, N.C. Mang, and A. Abubakar, Ultraviolet radiation curable epoxy resin encapsulant for light emitting diodes.
Journal of Applied Polymer Science, 2006. 100(2): p. 1048-1056.
[26] Wang, H., K.S. Lee, J.H. Ryu, C.H. Hong, and Y.H. Cho, White light emitting diodes realized by using an active packaging method with CdSe/ZnS quantum dots dispersed in photosensitive epoxy resins.
Nanotechnology, 2008. 19(14): p. 145202.
[27] Bae, W.K., K. Char, H. Hur, and S. Lee, Single-Step Synthesis of Quantum Dots with Chemical Composition Gradients. Chemistry of Materials, 2008. 20(2): p. 531-539.
[28] Bae, W.K., J. Kwak, J.W. Park, K. Char, C. Lee, and S. Lee, Highly Efficient Green-Light-Emitting Diodes Based on CdSe@ZnS Quantum Dots with a Chemical-Composition Gradient. Advanced Materials, 2009.
21(17): p. 1690-1694.
[29] Cho, J., Y.K. Jung, and J.-K. Lee, Kinetic studies on the formation of various II–VI semiconductor nanocrystals and synthesis of gradient alloy quantum dots emitting in the entire visible range. Journal of Materials Chemistry, 2012. 22(21): p. 10827.
[30] Biju, V., Y. Makita, A. Sonoda, H. Yokoyama, Y. Baba, and M. Ishikawa, Temperature-Sensitive Photoluminescence of CdSe Quantum Dot Clusters. The Journal of Physical Chemistry B, 2005. 109(29): p.
13899-13905.
[31] Liu, L., K. Zhong, L. Meng, D. Van Hemelrijck, L. Wang, and C.
Glorieux, Temperature-sensitive photoluminescent CdSe-ZnS polymer composite film for lock-in photothermal characterization. Journal of Applied Physics, 2016. 119(22): p. 224902.
[32] Valerini, D., A. Cretí, M. Lomascolo, L. Manna, R. Cingolani, and M.
Anni, Temperature dependence of the photoluminescence properties of colloidalCdSe∕ZnScore/shell quantum dots embedded in a polystyrene matrix. Physical Review B, 2005. 71(23).
[33] Joshi, A., K.Y. Narsingi, M.O. Manasreh, E.A. Davis, and B.D. Weaver, Temperature dependence of the band gap of colloidal CdSe∕ZnS core/shell nanocrystals embedded into an ultraviolet curable resin.
Applied Physics Letters, 2006. 89(13): p. 131907.
[34] Trung, N.N., Q.-P. Luu, B.T. Son, L.H. Sinh, and J.-Y. Bae, Preparation and characterization of silicone resin nanocomposite containing CdSe/ZnS quantum dots. Polymer Composites, 2012. 33(10): p.
1785-1791.
[35] Chun, K.S. and S. Husseinsyah, Agrowaste-based composites from cocoa pod husk and polypropylene. Journal of Thermoplastic Composite Materials, 2016. 29(10): p. 1332-1351.
[36] Garcia-Cruz, A., N. Zine, M. Sigaud, M. Lee, P. Marote, P. Lanteri, J.
Bausells, and A. Errachid, Controlled poly(pyrrole) patterning by
microcontact printing on glass and poly(ethylene terephthalate) substrates. Microelectronic Engineering, 2014. 121: p. 167-174.
[37] Kim, S., A. Cho, S. Kim, W. Cho, M.H. Chung, F.S. Kim, and J.H. Kim, Multi-purpose overcoating layers based on PVA/silane hybrid composites for highly transparent, flexible, and durable AgNW/PEDOT:PSS films. RSC Advances, 2016. 6(23): p.
19280-19287.