SAC105 合金較 SAC305 合金優秀，顯示 SAC105 合金具有較好的 抗衝擊能力。
(4) HTS 時間對銲點顯微組織、推球強度與高速推球強度的影響，在 HTS 500 小時之後，發生鈍化的現象。
參考文獻
[1] 郭福，無鉛釺焊技術與應用，科學出版社，中國，2005。
[2] http://www.cnyes.com/futures
[3] 上官東愷(D. Shangguan,)著，無鉛銲料互連及可靠性，劉建影，孫 鵬譯，電子工業出版社，北京，2008。
[4] G. Iyer, E. Ouyang, W. Kittidacha, S. Tantideeravit, and L.K. Suresh,
“Pb-free Solder: SAC105 vs SAC305 Drop-Test Reliability Data Comparison”, IEEE Electronic Manufacturing Technology Symposium 32nd, pp. 251-255, 2007.
[5] W.H. Zhu, L. Xu, J.H.L. Pang, X.R. Zhang, E. Poh, Y.F. Sun, A.Y.S.
Sun, C.K. Wang, and H.B. Tan, “Drop reliability study of PBGA assemblies with SAC305, SAC105 and SAC105-Ni solder ball on Cu-OSP and ENIG surface finish”, IEEE Electronic Components and Technology Conference 58th, pp. 1667-1672, 2008.
[6] 謝坤龍，王正全，「PCB 無鉛表面製程技術之介紹」，工業材料雜誌，
第 207 期，159-166 頁，2004。
[7] 林定皓，高密度印刷電路板技術，台灣電路板協會，台灣，2004。
[10] K. Suganuma, S.H. Huh, K. Kim, H. Nakase, and Y. Nakamura,
“Effect of Ag content on properties of Sn-Ag binary alloy solder:
Special issue on inovative solidification processing for advanced materials”, Materials transactions, Vol.42, pp. 286-291, 2001.
[11] D. Suh, D.W. Kim, P. Liu, H. Kim, J.A. Weninger, C.M. Kumar, A.
Prasad, B.W. Grimsley, and H.B. Tejada, “Effects of Ag content on fracture resistance of Sn-Ag-Cu lead-free solders under high-strain rate conditions”, Materials Science and Engineering A, Vol.460-461, pp.
595-603, 2007.
[12] A. Syed, J. Scanlan, S.W. Cha, W.J. Kang, E.S. Sohn, T.S. Kim, and C.G. Ryu, “Impact of package design and materials on reliability for temperature cycling, bend, and drop loading conditions”, IEEE Electronic Components and Technology Conference 58th, pp.
1453-1461, 2008.
[13] T.B. Massalski, H. Okamoto, Binary alloy phase diagrams, ASM international, Materials Park, 1990.
[14] K.N. Tu, and R.D. Thompson, “Kinetics of interfacial reaction in bimetallic Cu-Sn thin films”, Acta Materialia, Vol.30, pp.947-952, 1982.
[15] 陳信文，吳蒔涵，許秀鳳，李守維，「無鉛銲料的基礎性質(二)：
界面反應與物理性質」，電子與材料雜誌，第十八期，144-150 頁，
2003。
[16] P.T. Vianco, J.A. Rejent, and P.F. Hlava, “Solid-state intermetallic compound layer growth between copper and 95.5Sn-3.9Ag-0.6Cu solder”, Journal of Electronic Materials, Vol.33, pp.991-1004, 2004.
[17] C.E. Ho, S.C. Yang, and C.R. Kao, “Interfacial reaction issues for lead-free electronic solders”, Journal of Materials Science: Materials in Electronics, Vol.18, pp.155-174, 2007.
[18] 張道智，游善溥，「無鉛銲點弱化行為之探討」，電子與材料雜誌，
第 27 期，82-89 頁，2005。
[19] S. Bader, W. Gust, and H. Hieber, “Rapid formation of intermetallic compounds interdiffusion in the Cu-Sn and Ni-Sn systems”, Acta metallurgica et materialia, Vol.43, pp.329-337, 1995.
[20] D. Gur, and M. Bamberger, “Reactive isothermal solidification in the Ni-Sn system”, Acta materialia, Vol.46, pp.4917-4923, 1998.
[21] D.R. Frear, J.W. Jang, J.K. Lin, and C. Zhang, “Pb-free solders for flip-chip interconnects”, JOM Journal of the Minerals, Metals and Materials Society, Vol.53, pp. 28-33, 2001.
[22] W.K. Choi, and H.M. Lee, “Effect of Ni layer thickness and soldering time on intermetallic compound formation at the interface between molten Sn-3.5 Ag and Ni/Cu substrate”, Journal of Electronic Materials,Vol.28, pp. 1251-1255, 1999.
[23] C.E. Ho, R.Y. Tsai, Y.L. Lin, and C.R. Kao, “Effect of Cu concentration on the reactions between Sn-Ag-Cu Solders and Ni”,
A7%8B%E8%A3%9D%E7%B5%90%E6%A7%8B%E5%88%86%E6
[25] M.L. Minges, Electronic materials handbook: packaging, Vol. 1, CRC, 1989.
[26] 王智弘，「半導體產業鏈總動員 SiP 技術來勢洶洶」，新電子雜誌，
第 258 期，2007。
[27] J.H. Lau, Solder joint reliability: theory and applications, Springer, 1991.
[28] 謝國華， 「IC 可靠度簡介」，電子與材料，第八期，第 57-62 頁，
2000。
[29] Z. Chen, J. Zhou, X. Fu, and J. Lee, “Pad finish related board-level solder joint reliability research”, IEEE Electronic Packaging Technology & High Density Packaging International Conference 11th, pp. 1039-1042, 2010.
[30] M. Lou, J. Zhou, L. Wen, W. Feng, and J. Lee, “System level drop reliability method research for netbook memory module”, IEEE Electronic Packaging Technology & High Density Packaging International Conference 11th, pp.1043-1048, 2010.
[31] W.H. Wu, C.S. Lin, S.H. Huang, and C.E. Ho, “Influence of palladium thickness on the soldering reactions between Sn-3Ag-0.5 Cu and
Au/Pd (P)/Ni (P) surface finish”, Journal of electronic materials, Vol.39, pp. 2387-2396, 2010.
[32] J. Mao, B. Liu, M. Li, Y. Wang, and D. Mao, “IMC formation between electroless Ni/Pd/Au surface finish and SnAgCu solder”, IEEE Electronic Packaging Technology & High Density Packaging, pp.1-4, 2008.
[33] C.H. Fu, L.Y. Hung, D.S. Jiang, C.C. Chang, Y.P. Wang, and C.S.
Hsiao, “Investigation of IMC growth and solder joint reliability on new surface finish-ENEPIG”, IEEE International Microsystems, Packaging, Assembly and Circuits Technology Conference, pp.331-334, 2007.
[34] C.H. Fu, L.Y. Hung, D.S. Jiang, C.C. Chang, Y.P. Wang, and C.S.
Hsiao, “Evaluation of new substrate surface finish: Electroless nickel/Electroless Palladium/immersion Gold (ENEPIG)”, IEEE Electronic Components & Technology Conference 58th, pp. 1931-1935, 2008.
[35] C.W. Lee, L.Y. Hung, C.C. Chang, Y.P. Wang, and C.S. Hsiao, “The Investigation of Intermetallic Compound Morphology Effect on the Solder Joint Performance”, IEEE Microsystems, Packaging, Assembly
& Circuits Technology Conference 3rd , pp.263-266, 2008.
[36] JESD22-B117A, Solder Bump Shear, JEDEC SOLID STATE
reaction in diffusion couples between Sn-Pb solder and Cu/Ni/Pd metallization”, Acta materialia, Vol.48, pp. 3719-3738, 2000.
[39] Y.C. Lin, and J.G. Duh, “Phase transformation of the phosphorus-rich layer in SnAgCu/Ni–P solder joints”, Scripta materialia, Vol.54, pp.
1661-1665, 2006.
[40] Y.C. Lin, T.Y. Shih, S.K. Tien, and J.G. Duh, “Suppressing Ni–Sn–P growth in SnAgCu/Ni–P solder joints”. Scripta materialia, Vol.56, pp.
49-52, 2007.
[41] Y.C. Lin, K.J. Wang, and J.G. Duh, “Detailed phase evolution of a phosphorous-rich layer and formation of the Ni-Sn-P compound in Sn-Ag-Cu/electroplated Ni-P solder joints”, Journal of electronic materials, Vol.39, pp. 283-294, 2010.
[42] K.S. Lin, H.Y. Huang, and C.P. Chou, “Interfacial Reactions and Bonding Strength of Sn-x Ag-0.5 Cu/Ni BGA Solder Joints”, Journal of materials engineering and performance, Vol.18, pp. 182-189, 2009.
[43] C.F. Tseng, T.K. Lee, and G. Ramakrishna, “Suppressing Ni3Sn4 formation in the Sn-Ag-Cu solder joints with Ni-P/Pd/Au surface finish”, Materials Letters, 2011.
[44] T.H. Chuang, S.F. Yen, and H.M. Wu, “Intermetallic formation in Sn3Ag0. 5Cu and Sn3Ag0. 5Cu0. 06Ni0. 01Ge solder BGA packages with immersion Ag surface finish. Journal of electronic materials”, Vol.
35, pp. 310-318, 2006.
[45] R. Darveaux, and C. Reichman. “Ductile-to-brittle transition strain rate”, IEEE. Electronics Packaging Technology Conference 8th, pp.283-289, 2006.