5.1 實驗結果探討
2. CNCs、BP2000、XC72 作為觸媒載體方面，三者以同樣的製程
含浸銀粒子，在電催化活性上，在相似的催化劑承載量下，
Ag-CNCs 輸 出 電 壓 的 增 加 量 皆 優 於 Ag-BP2000 以 及 Ag-XC72，這顯示 CNCs 相較於其他兩者為更優良的觸媒載 體。與尚未添加催化劑的 CNCs 電極相較之下，有銀粒子的添 加的確會提高電極的效能，並且從X 光繞射圖可看出我們以含
浸法製備的銀粒子有良好的FCC 結構。
[1]. M. Stuve, ‘Fuel Cell Engineering Course Notes’, 1998.
[2]. B.C.H. Steele, A. Heinzel, ‘Materials for fuel cell technologies’, Nature, v414, p.345, 2001.
[3]. K.Kordesch: ‘Ulmann’s encyclopedia of industrial chemistry’, Vol.A12, p.82, John Wiley & Sons, 1987.
[4]. A. J. Appleby and F. R. Foulkes, ‘Fuel cell handbook’, p.540, John Wiley & Sons, 1993.
[5]. J. O’M. Bockris and S. Srinivasan, ‘Fuel Cell’, p.179, McGraw-Hill, 1993.
[6]. S. Litster and G. McLean, ‘PEM fuel cell electrodes’, J. Power Sources, v130, p.61, 2004.
[7]. G.F. McLean ., T. Niet, S. Prince-Richard, and N. Djilali, ‘An assessment of alkaline fuel cell technology’, International Journal of Hydrogen Energy, v27, p.507, 2002.
[8]. 周震濤，王剛，「電池」， v33 ，p.6， 2003。
[9]. 劉霖錡，「鋅空氣電池空氣極的製備與性能」，私立逢甲大學 碩士論文. 2003
[10]. Massoud Pirjamali, Yohannes Kiros，J. Power Sources, v109, p.446, 2002.
[11]. Mario Maja, Claudio Orecchia, Morela Strano, Paolo Tosco,Marco Vanni, Electrochim. Acta., v46, p.423,2000
[12]. 辛毓真，「鑭鈣銅氧相關系列催化劑在鋅-空氣電池中還原反應 之研究」，國立交通大學碩士論文，2006。
[13]. 呂秉錚，「可機械充電式鋅空氣電池之電鍍鋅電極製程與其電
化學行為之研究」，國立清華大學碩士論文. 2001.
[14]. Eniya Listiani Dewi, Kenichi Oyaizu, Hiroyuki Nishide, and EishunTsuchida,J. Power Sources, v115, p.149, 2003.
[15]. K. Tomantschger, R. Findlay, M. Hanson, K. Kordesch, S.
Srinivasan, ‘Degradation modes of alkaline fuel cells and their components’, J. Power Sources, v39, p.21, 1992.
[16]. N. Staud, P.N. Ross, ‘The corrosion of carbon black anodes on alkaline electrolyte’, J. Electrochem. Soc., v133, p.1079, 1986.
[17]. T.J. Schmid, H.A. Gasteiger, R.J. Behm, ‘Rotating disk electrode measurements on the CO tolerance of a high-surface area Pt/vulcan carbon fuel cell catalyst’, J. Electrochem. Soc., v146, p.1296, 1999.
[18]. G. Nadeau, X.Y. Song, M. Masse, A. Guerfi, G. Brisard, K.
Kinoshita, K. Zaghib, ‘Effect of heat-treatment and additives on the particles and carbon fibers as anodes for lithium-ion batteries’, J.
Power Sources, v108, p.86, 2002.
[19]. R. Yang, X. Qiu, H. Zhang, J. Li, W. Zhu, Z. Wang, X. Huang, L.
Chen, ‘Monodispersed hard carbon spherules as a catalyst support for the electrooxidation of methanol’, Carbon, v43, p.11 , 2005.
[20]. A.L. Dicks: ‘The role of carbon in fuel cells’, J. Power Sources, v156, p.128, 2006.
[21]. S. Iijima, ‘Helical microtubules of graphitic carbon’, Nature, v354, p.56, 1991.
[22]. T.C. Liu, Y.Y. Li, ‘Synthesis of carbon nanocapsules and carbon nanotubes by an acetylene flame method’ Carbon, v44, p.2405 2006.
[23]. A. Kongkanand, S. Kuwabata, G. Girishkumar, P. Kamat,
‘Single-wall carbon nanotubes supported platinum nanoparticles with improved electrocatalytic activity for oxygen reduction reaction’, Langmuir, v22, p.2392, 2006.
[24]. H. Huang, W. Zhang, M. Li, Y. Gan, J. Chen, Y. Kuang, ‘Carbon nanotubes as a secondary support of a catalyst layer in a gas diffusion electrode for metal air batteries’, J. Colloid and Interface Sci., v284, p.593, 2005.
[25]. E. Yeager, ‘Dioxygen electrocatalysis: mechanisms in relation to catalyst structure’, J. Mol. Catal., v38, p.5, 1986.
[26]. J. Maruyama , M. Inaba, and Z. Ogumi, ‘Rotating ring-disk electrode study on the cathodic oxygen reduction atNafion®-coated gold electrodes’, Journal of Electroanalytical Chemistry, v 458, p.175–182, 1998.
[27]. U.A. Paulus , T.J. Schmidt , H.A. Gasteiger , and R.J. Behm,
‘Oxygen reduction on a high-surface area Pt:Vulcan carboncatalyst: a thin-film rotating ring-disk electrode study’, Journal of Electroanalytical Chemistry, v495, p.134–145, 2001.
[28]. Kinoshita, and Kim, ｀Electrochemical oxygen technology＇, John Wiley & Sons, New York,1992.
[29]. J. R. Goldstein, and A. C. C. Tseung, Nature., v222, p. 869. 1969.
[30]. U. R. Evans, Nature, v218, p.602, 1968.
[31]. A. C. C. Tseung, and H. L. Bevan, Electroanalytical Chemistry and Interfacial Electrochemistry, v45, p. 429, 1973.
[32]. Y. Matsurmoto, H. Yoneyama, and H. Tamura, Bull. Chem.
Soc.Jpn., v51 , p.1927, 1978.
[33]. Y. Matsumoto, and E. Sato, Electrochimica Acta, v25,p.585, 1980 [34]. X. Li, I.-M. Hsing, ‘The effect of the Pt deposition method and the
support on Pt dispersion on carbon nanotube’. Electrochim. Acta, v51, p.5250, 2006.
[35]. E. Lafuente, E. Muñoz, A.M. Benito, W.K. Maser, M.T. Martínez, F. Alcaide, L. Ganborena, I. Cendoya, O. Miguel, J. Rodríguez, E.P.
Urriolabeitia,and R. Navarro, Single-walled carbon nanotube-supported platinum nanoparticles as fuel cell electrocatalysts.
J. Mater. Res., v21, p.2841, 2006.
[36]. J. Ding, K.Y. Chan, J. Ren, and F.S. Xiao, ‘Platinum and platinum–ruthenium nanoparticles supported on ordered mesoporous carbon and their electrocatalytic performance for fuel cell reactions’.
Electrochim. Acta, v50, p.3131, 2005.
[37]. S. Gamburzev, K. Petrov, and A.J. Appleby, ‘Silver–carbon electrocatalyst for air cathodes in alkaline fuel cells’, J. Appl.
Electrochem., v32, p.805, 2002.
[38]. K.-S. Chou, C.-Y. Ren, Synthesis of nanosized silver particles by chemical reduction method’, Mater. Chem. Phys., v64, p.241, 2000.
[39]. Z. Tang, S. Liu, S. Dong, and E. Wang, ‘Electrochemical synthesis of Ag nanoparticles on functional carbon surface’, J. Electroanal.
Chem., v502, p.146, 2001.
[40]. S. Ardizzone, M. Falciola, and S. Trasatti, ‘Effect of the nature of the precursor on the electrocatalytic properties of thermally prepared ruthenium oxide’, J. Electrochem. Soc., v136, p.1545 ,1989.
[41]. V.S. Bagotzky, N.A. Shumilova, and E.I. Khrushcheva,
‘Electrochemical oxygen reduction on oxide catalysts’. Electrochim.
Acta, v21, p.919, 1975.
[42]. Z.D. Wei, W.Z. Huang, S.T. Zhang, J. Tan, ‘Induced effect of Mn3O4 on formation of MnO2 crystals favorable to catalysis of oxygen reduction’. J. Appl. Electrochem., v30, p.1133, 2000.
[43]. S.K. Tiwari, P. Chartier, R.N. Singh, ‘Preparation of perovskite- type oxides of cobalt by the malic acid aided process and their electrocatalytic surface properties in relation to oxygen evolution’. J.
Electrochem. Soc., v142, p.148, 1995.
[44]. S. Müller, K. Striebel, and O. Haas, ‘La0.6Ca0.4CoO3: a stable and powerful catalyst for bifunctional air electrodes’, Electrochim. Acta, v39, p.1661, 1994.
[45]. N.L. Wu, W.R. Liu, and S.J. Su, ‘Effect of oxygenation on electrocatalysis of La0.6Ca0.4CoO3−x in bifunctional air electrode’, Electrochim. Acta, v48, p.1567, 2003.
[46]. C.K. Lee, K.A. Striebel, F.R. McLarnon, E.J. Cairns, ‘Thermal treatment of La0.6Ca0.4CoO3 perovskites for bifunctional air electrodes’.
J. Electrochem. Soc., v144, p.3801, 1997.
[47]. J.O’M. Bockris and T. Otagawa, ‘The electrocatalysis of oxygen evolution on perovskites’. J. Electrochem. Soc., v131, p.290, 1984.
[48]. J. Ponce, J.–L. Rehspringer, G. Poillerat, J.L. Gautier,
‘Electrochemical study of nickel–aluminium–manganese spinel NixAl1−xMn2O4. Electrocatalytical properties for the oxygen evolution reaction and oxygen reduction reaction in alkaline media’.
Electrochim Acta, v46, p.3373, 2001.
[49]. M. Sugawara, M. Ohno, and K. Matsuki, ‘Oxygen reduction
catalysis of Mn–Co spinel oxides on a graphite electrode in alkaline solution’, J. Mater. Chem., v7, p.833, 1997.
[50]. M.E. Baydi, S.K. Tiwari, R.N. Singh, J.– L. Rehspringer, P.
Caritier, J.F. Koenig, and G. Poillerat, ‘High specific surface area nickel mixed oxide powders LaNiO3 (perovskite) and NiCo2O4 (spinel) via sol-gel type routes for oxygen electrocatalysis in alkaline media’. J.
Solid State Chem., v116, p.157, 1995.
[51]. F. Zhao, F. Harnisch, U. Schröder, F. Scholz, P. Bogdano, and I.
Herrmann, ‘Application of pyrolysed iron(II) phthalocyanine and CoTMPP based oxygen reduction catalysts as cathode materials in microbial fuel cells’. Electrochem. Commun., v7, p.1405, 2005.
[52]. 辛毓真，「鑭鈣銅氧相關系列催化劑在鋅-空氣電池中還原反應 之研究」，國立交通大學碩士論文，2006
[53]. 汪建民主編，「材料分析」，中國材料科學學會. 2004.
[54]. T.C. Liu, Y.Y. Li, ‘Synthesis of carbon nanocapsules and carbon nanotubes by an acetylene flame method’ Carbon, v44, p.2405 2006