[1] 鳴滝朋，コストダウンのための射出成形不良の原因と対策，初版，シ
[2]郭 模設計與製造
グマ出版，pp. 151-180，1999。
振彬，張建安，熊秉傑，實用塑膠 ，初版，徐氏基金會，
[3] and B.D. Favis, “Weldlines in Injection pp. 10-50，民國八十五年。
S. Fellahi, A. Meddad, B. Fisa,
Molded Parts: A Review”, Advances in Polymer Technology, Vol. 14, N pp. 169-195, 1995.
I. S. Dairanieh, A. H
O.3,
[4] aufe, H. J. Wolf, and G. Mennig, “Computer Simulation of Weld Lines in Injection Molded Poly (Methyl Methacrylate)”, Polymer Engineering and Science, Vol.36, NO.15, pp. 2050-2057, 1996.
Osman G. Ersoy and Nihan Nugay, “A new approach to increase
[5] weld line
strength of incompatible polymer blend composites: selective filler addition,” Polymer, 45, pp. 1243-1252, 2004.
R. Selden, “Effect of Processing on Weld Line
[6] Strength in Five Thermoplastics”, Polymer Engineering and Science, Vol.37, NO 205-218, 1997.
Younggon Son, K
.1, pp.
[7] yung Hyun Ahn, and Kookheon Char, “Weldline Morphology of Injection Mold Modified Poly(phenylene-oxide)/
Polyamide-6 Blends”, Polymer Engineering and Science, Vol.41, NO.3, 554-565, 2001.
pp.
[8] Necar Merah, M. Irfan-ul-Haq, Z. Khan, “Temperature and Weld-line Effects on Mechanical Properties of CPVC”, Journal of Materials Processing
Technology 142, pp. 247-255, 2003.
E. M. Hagerman, “Weld-Line Fracture
[9] in Moulded Parts”, Plastics Eng., Oct.
[10 ，金屬化塑膠及橡膠製造暨雙層射出成型性質研究，淡江大學，
1973.
]王文杰
碩士論文，民國88 年。
]李艾璁，應用平版式熱管
[11 加熱機構於射出成型之結合線消除，交通大
[12 A Filler for ABS/Polycarbonate 學，碩士論文，民國95 年。
]M. T. Patorini, R. C. R. Nunes, “Mica as
Blends”, Material of Applied Polymer Science, Vol.74, pp. 1361-1365, 199 ]T. Kyu, G. C. Zhu, Z. L. Zhou, Y. Tajuddin, and S. Qutubuddin, “Novel
9.
[13
Filled Polymer Composites Prepared from in Situ Polymerization Via a Colloidal Approach. I. Kaolin/ Nylon-6 in situ Composites”, J. Polymer Science, Part B: Polymer Physics, Vol.34, pp. 1761-1768, 1996.
]T. Kitano, T. Kataoka, Y. Nagatsuka, “Dynamic Flow Properties
[14 of Vinylon
Fiber and Glass Fiber Reinforced Polyethylene Melts”, Rheologica Acta, Vol.23, pp. 408-416, 1984.
]W. Y. Chiu, T. C. Hsueh, “T
[15 he Viscoelastic Properties of PP/Glass Fiber Composites in Moten State”, Journal of Applied Polymer Science, Vol.32 4663-4678, 1986.
]T. Kitano, T. Katao
, pp.
[16 ka, Y. Nagatsuka, “Shear Flow Rheological Properties of Vinylon- and Glass-Fiber Reinforced Polyethylene Melts”, Rheologica Acta, Vol.23, pp. 20-23, 1984.
]J. George, S. S. Bhagawa
[17 n, and N. Prabha-Karan, “Short
Composites”, Pineapple-leaf-fiber-Reinforced Low-density Polyethylene
Journal of Applied Polymer Science, Vol.57, pp. 843-854, 1990.
]K. Gandhi and R. Salovey, “Thermal Behavior of Carbon Black F
[18 illed
Polymers”, Journal of Applied Polymer Science, Vol.41, pp. 2103-2111, 1990.
]J. Rag
[19 havan, M. Meshii, D. Feng, “Influence of Reinforcing Continuous Carbon Fibers on the Viscoelastic Properties of Epoxy Matrix”, Polymer Composites, Vol.18, 1, 1997.
]Y. G. Yanovsky, ”Polymer Rh
[20 eology: Theory and Practice”, Chapman &
Hall, 1993.
]R. E. S. Bre
[21 tas, R. L. Powell, “Dynamic and Transient Rheological Properties of Glass Filled Polymer Melts”, Rheologica Acta, Vol.24, 69-74, 1985.
]T. Nakatsuka,
pp.
[22 H. Kawasaki, K. H. Itadani, “Phosphate coupling agents for calcium carbonate filler”, Journal of Applied Polymer Science, Vol.27, pp.
259-269, 1982.
]湯士弘，耐隆納
[23 米複合材料摻和ABS 之流變性，淡江大學，碩士論文，
[24 配料
民國90 年。
]李繼強，塑膠 ，四版，三民書局股份有限公司，pp. 41-58，民國七
[25 Chun, “Cavity Filling Analyses of Injection Molding Simulation:
十五年。
]Du-Hwan
Bubble and Weld Line Formation,” Journal of Materials Processing Technology, pp.177-181, 1999.
]Miguel Pazos, Juan Baselga, Jul
[26 io Bravo, “Limiting Thickness Estimation in Polycarbonate Lenses Injection Using CAE Tools,” Journal of Materials Processing Technology, pp.143-144, 2003.
]Chang Lu, Shaoyun Guo, Li Wen,
[27 Junyou Wang, “Weld Line Morphology and Strength of Polystyrene / Polyamide-6 / Poly (styrene – co - maleic anhydride) Blends,” European Polymer journal, pp.2565-2572, 2004.
]Lih-Sheng Turng, Hrishikesh Kharbas, “Effect of Process Condition on the [28
Weld-Line Strength and Microstructure of Microcellular Injection Parts.”
Polymer Engineering and Science, Vol.43, No.1, pp.157-168, 2003.
]W. Dai,P. Liu and X. Wang, ”An Improved Mold Pin Gate and It
[29 ’s Flow
Pattern In The Cavity , Journal of Injection Molding Technology, Vol. 6, No.
2, pp.115-119, June 2002.
]R. P. Koster, “Importance
[30 of Injection Molding Parameters for Mechanical Performance of Cold Flow Weld Lines”, Journal of Injection Molding
Technology, Vol.3, NO.3, pp.154-158, 1999.
]L. wang, P.S. Allan &M.J. Bevis, “Enhanc
[31 ement of Internal Weld Line Strength in Thermotropic Liquid Crystal Polymer Mouldings”, Plastics Rubber and Composites Processing and Application, NO.23, pp.139-150, 1995.
]曾宇譚
[32 ，射出成型之製程參數對不同材質縫合線強度的影響，成功大學
[33 討，中原大學機械工程學系
[34 aison, “Optimization of Weld Line Quality in 工程科學研究所碩士論文，民國86 年。
]鍾明修，ABS 薄殼射出成型件縫合線之探 碩士論文，民國90 年。
]Tao C. Chang and Ernest F
Injection Molding Using an Experimental Design Approach” , Journal of Injection Molding Technology, Vol.3, NO.2, pp. 61-66, 1999.
]Shih-Jung Liu, Jun-Yu Wu, and Jer-Haur Chang, “An Experim
[35 ental Matrix
Design to Optimize the Weld line Strength in Injection Molded Parts”, Polymer Engineering and Science”, NO.40, Vol.5, pp. 1256-1262, May 2000.
] Y.H. C
[36 hung, K. Kato, N. Otake “Melt Front Surface Asperity and of Welding-defect Generation in Ceramic Injection Molding ”, Journal Materials Processing Technology, pp. 219-224, 2001.
]犬塚隆之，藤田章洋，仲井朝美，”
[37 Study on In-mold Punching during Injection Molding”，成形加工，pp. 257-258，2006。
]A. Faghri,
[38 Heat Pipe Science and Technology, Taylor & Francis, Bristol,
[39 內贒著，洪榮哲譯，實用塑膠學 1995.
] 伊保 ，初版，全華書局，pp. 19、124、
171，民國八十二年。
附件一 模具完成之架設圖
（a）模具公模側及氣壓缸 （b）模具母模側