[1].R.S. Matos , J.V.C. Vargas , T.A. Laursen , A. Bejan ｀Three-dimensional optimization of staggered finned circular and elliptic tubes in forced convection＇, Journal of Thermal Sciences 43 (2004) 477–487
[2].R.S. Matos , J.V.C. Vargas , T.A. Laursen , A. Bejan ｀Optimally staggered finned circular and elliptic tubes in forced convection＇, Journal of Heat and Mass Transfer 47(2004) 1347–1359
[3]. Dunwoody, N.T,, 『 ＂ Thermal results for forced heat convection through elliptical ducts＂」, J. of Applied Mech., Vol.29, PP.l65-170, (1962).
[4]. Brauer, H.,「＂Compact heat exchangers＂』, Chem. & Process Engineering, London, Vol.45, No.8, PP.451-460, (1964).
[5]. Schenk, J. and Han, B.S., 『“Heat transfer from laminar flow in ducts with elliptic cross section＂」, Appl. Sci. Res., Vol.17, PP.96-114,(1967).
[6]. D. G. Rich, 『＂The effect of fin spacing on the heat transfer and friction performance of multi-row plate fin-and-tube heat exchangers＂』,ASHRAE Trans. 17, 137-145 (1973).
[7]. D. G. Rich,『＂The effect of the number of tube rows on the heat transfer performance of smooth plate and fin and tube heat exchangers＂』, A SHRAE Trans.
81, 307-317 (1975).
[8]. F. E. M. Saboya and E. M. Sparrow, 『＂Local and average transfer coefficients for one-row plate fin and tube heat exchanger configurations＂』,ASME J. Heat Transfer 96, 265-272 (1974).
[9]. F. E. M. Saboya and E. M. Sparrow, 『＂Transfer characteristics of two row plate fin and tube heat exchanger configurations＂』, Int. J. Heat Mass Transfer 19, 41-49 (1976).
[10]. F. E. M. Saboya and E. M. Sparrow,『＂Experiments on a three-row fin and tube heat exchanger＂』, J. Heat Transfer 98, 26-34 (1976).
[11]. F. C. McQuiston, 『 ＂Correlation for heat, mass and momentum transport coefficients for plate-fin-tube heat transfer surfaces with staggered tube＂』,ASHRAE Trans. 84, 294-309 (1978).
[12]. D. L. Gray and R. L. Webb, 『＂Heat transfer and friction correlations for plate fin-and-tube heat exchangers having plain fins＂』, Proceedings of the Ninth International Heat Transfer Conference, San Francisco (1986).
[13]. Terukazu,O.,Hiideya,N.,and Yukiyasu T., 『“Heat Transfer and flow around an Elliptic Cylinder＂』Bull.Japan Soc.Mech.Eng. ,Vol.26,PP262-267,( 1983) [14]. Ota, T., Aiba, S., Tsuruta, T., and Kaga, M., 『“Forced convection heat transfer from an elliptic cylinder of axis ratio 1 : 2＂』, Int. J. Heat Mass Transfer, Vol.27, No.10, PP.1771-1779, (1984).
[15]. H. Yamashita, G. Kushida and R. Izumi, 『＂Fluid flow and heat transfer in a plate-fin and tube heat exchanger(Analysis of fluid flow around a square cylinder situated between parallel plates)＂』, Bull. JSME, 29 (254),2562 - 2569 (1986).
[16]. Tsareva, E. A., Galin, N.M., and Dem＇Yanenko, V Y., 『“Hydrodynamics and local heat transfer to a turbulent flow in tubes of elliptical cross section＂』,Teploenergetika, Vol.38 ,PP.623-626, (1991).
[17] . Bastini, M. Fiebig and N. K. Mitra, 『＂Numerical studies of a compact fin-tube heat exchanger＂』, Proceedings of the EUROTHERM Seminar No.18, Design and Operation of Heat Exchangers, 27 February-1 March,pp. 154-163.Hamburg, Germany
18
(1991).
[18] . Badr, H. M., 『“Mixed convection from a straight isothermal tube of elliptic cross section＂」, Int. J. Heat Mass Transfer, Vol.37, No.15,PP.2343-2365, (1994).
[19]. F. Zdravistch, C. A. J. Fletcher and M. Behnia, 『＂Laminar and turbulent heat transfer predictions in tube banks in cross flow＂』, Proceedings of the Int.
Conference on Fluid and Thermal Energy Conversion, pp.29-34,12-15 December, Kutta-Denpasar, Indonesia (1994).
[20]. F. C. McQuiston and J. D. Parker, Heating, 『 ＂Ventilating and Air Conditioning Analysis and Design＂』, John Wiley, New York (1994).
[21] . J. J. Jang, M. C. Wu, and W. J. Chang , 『＂Numerical and Experimental Studies of Three-Dimensional Plate-Fin-and Tube Heat Exchangers＂』, Int.J . Heat Mass Transfer, vol. 43, no. 14, pp. 3057–3066, (1996).
[22]. Jang, J.Y. and Lin, C. N. and Shien, K. P., (2001), 『“3-D thermal-hydraulic analysis in convex louver finned -tube heat exchangers＂』, accepted for publication in 2001 American Society of Heating, Refrigeration and Air-conditioning Engineers Annual Meeting, Cincinnati , OH, U.S. A., June 22-27.
[23] H. Ay, J.Y. Jang, and J.N. Yeh, 『“Local heat transfer measurements of plate finned-tube heat exchangers by infrared thermography＂』, International Journal of Heat and Mass Transfer, Vol.45, pp.4069-4078,(2002).
[24] C.H. Huang, I.C. Yuan, and H. Ay, 『“A three-dimensional inverse problem in imaging the local heat transfer coefficients for plate finned-tube heat exchangers＂ 』 , International Journal of Heat and Mass Transfer, Vol.46, pp.
3629-3638,(2003).
[25] Ş. Yildiz and H. Yüncü, 『“An experimental investigation on performance of annular fins on a horizontal cylinder in free convection heat transfer＂』,Heat and Mass Transfer, Vol.40, pp.239-251, (2004).
[26] V.T. Morgan, 『“The overall convective heat transfer from smooth circular cylinder＂』 , In Advanced Heat Transfer, Vol.11, pp.199-264, T.F. Irvine and J.P.
Harnett, eds., Academic Press, New York, (1975).
[27] S.W. Churchill and H.H.S. Chu, 『“Correlating equations for laminar and turbulent free convection from horizontal cylinder＂』, International Journal of Heat and Mass Transfer, Vol.18, pp.1049-1053, (1975).
[28] M.S. Mon and U. Gross, 『 “Numerical study of fin-spacing effects in annular-finned tube heat exchangers＂』, International Journal of Heat and Mass Transfer, Vol.47, pp.1953-1964, (2004).
[29]. Briggs, D. E. and Young, E. H., 『“Convection heat transfer and pressure drop of air flowing across triangular pitch banks of finned tubes＂』, Chem. Eng.
Prog. Symp. Ser., Vol.59, No.41, PP.1-10, (1963).
[30]. Robinson, K. K. and Briggs, D. E., 『“Pressure drop of air flowing across triangular pitch banks of finned tubes＂』, Chem. Eng. Prog. Symp. SerVol.62, No.64, PP.177-184, (1966).
[31]. Rich, D. G., 『“The effect of the number of tube rows on the heat transfer performance of smooth plate and fin-and-tube heat exchangers＂』, ASHRAE Trans., Vol.81, Pt.l, PP.307-317, (1975).
[32]. Idem, S. A. and Jacobi, A.M. and Goldchmidt, V. W., 『 “Heat transfer characterization of a finned-tube heat exchanger (with and without condensation)＂』, Transaction of the ASME, Vol.112, PP.64-70, (1990).
19
[33]. Le Feuvre, R. F., 『“Laminar and turbulent forced convection processes through in-line tube banks＂』, Imperial College London, Mechanical Engineering Department, HTS/74/5, (1973).
[34]. Launder, B.E. and Massey, T.H., 『“The numerical prediction of viscous flow and heat transfer in tube banks＂』, J. Heat Transfer (ASME), Vol.100, PP.565-571, (1978).
[35]. Fujii, M., Fujii, T., and Nagata, T,. 『“A numerical analysis of laminar flow and heat transfer of air in an in-line tube bank＂』, Numerical Heat Tranfer, Vol.7,PP.89-102, (1984).
[36]. Farouk, B., Güceri, Sí., 『“Natural convection from horizontal cylinders in interacting flow fields＂』, Int. J. Heat Mass Transfer, Vol.26, PP.231-243, (1983).
[37]. Wung, T. S. and Chen, C. J., 『“Finite analytic solution of convective heat transfer for tube arrays in crossflow：part 1--flow field analysis＂』, J. of Heat Transfer (ASME), Vol.111, PP.633-640, (1989).
[38]. Wung, T. S. and Chen, C. J., 『“Finite analytic solution of convective heat transfer for tube arrays in crossflow：part 2--heat transfer analysis＂』, J. of Heat Transfer (ASME), Vol.111, PP.641-648, (1989).
[39]. Faghri, M. and Rao, N., 『“Numerical computation of flow and heat transfer in finned and unfinned tube banks＂』, International J. of Heat and Mass Transfer, Vol.30, No.2, PP.363-372, (1987).
[40]. Bejan A., Fowler A. J., 『“The optimal spacing between horizontal cylinders 68 in a fixed volume cooled by natural convection＂』, Int. J.Heat Mass Transfer., Vol.38, No.11, PP.2047-2055, (1995).
[41] A. Faghri Z.J. Zuo 『Entropy generation in a heat pipe system』Applied Thermal Engineering Volume: 19, Issue: 10, October, 1999, pp. 1027-1043
[42] 卓世傑 『銅粉燒結型微熱管之研究』全國碩博士論文
[43] V.G.PastukhovYu.F.Maidanik Et al.Applied 『Miniature loop heat pipes for electronics cooling』Thermal Engineering Volume: 23, Issue: 9, June, 2003,pp.
1125-1135
[44] 蔡宗翰 『Effects of Shapes on the Vapor Flow of Heat Pipes』全國碩博士論文 [45] Hong Zhang、Jun Zhuang 『Research, development and industrial application of heat pipe technology in China』Applied Thermal Engineering Volume: 23, Issue: 9, June, 2003,pp. 1067-1083
[46] Leonard L. Vasiliev 『Review Heat pipes in modern heat exchangers』Applied Thermal Engineering Volume: 25, Issue: 1, January, 2005, pp. 1-19
[47] L.L.Vasiliev 『Micro and miniature heat pipes – Electronic component coolers』
Applied Thermal Engineering Volume: 28, Issue: 4, March, 2008, pp. 266-273 [48] 汪永川 『Hydraulic and Thermal Characters of Sintered Wick Structures in Heat Pipes』全國碩博士論文
[49] 郭伯軒 『Numerical Analysis of the Heat Transfer Characteristics of Micro Heat Pipes』全國碩博士論文
20