[1] H. Iwa, T. Ohguro and S.I. Ohmi, “NiSi salicide technology for scaled CMOS” in Microelectronic Engineering vol. 60 , pp. 157-169 , 2002.
[2] T. Morimoto, H. S. Momose, T. Iinuma, I. Kunishima, K. Suguro, H. Okano, I Katakabe, H. Nakajima, M. Tsuchiaki,M. Ono, Y. Katsumata, H. Iwai, “A NiSi salicide technology for advanced logic devices” ,in IEDM Tech. Dig. pp.653–656.
1991.
[3] A. Lauwers, M. de Potter, O. Chamirian, R. Lindsay, C. Demeurisse, C. Vrancken and K. Maex, “Silicides for the 100-nm node and beyond: Co-silicide,
Co(Ni)-silicide and Ni-silicide” in Microelectronic Engineering , vol. 64 , pp.
131-142, 2002.
[4] Y. L Jiang, A. Aganval, G. P. Ru, X.P. Qu andB.Z. Liz “Dopant Redistribution Induced by Ni Silicidation at 300°C”in IEEE 2004.
[5] T. Iijima, A. Nishiyama, Y. Ushiku, T. Ohguro, I. Kunishima, K. Suguro, H. Iwai,
“A new contact plug technique for deep-sub micrometer ULSI’s employing
selective nickel silicidation of polysilicon with a titanium nitride stopper” in Symp.
VLSI Tech., Dig. Tech. pp.371–372. 1993 .
[6] O. Chamirian , J.A. Kittl , A. Lauwers , O. Richard, M. van Dal, K. Maex
“Thickness scaling issues of Ni silicide” in Microelectronic Engineering vol.70, pp.201-208, 2003.
[7] Y.Tschiya, A. Tobioka, O. Nakatsuka, H. Ikeda, A. Sakai, S. Zaima and Y. Yasuda
“Electrical Properties and Solid-Phase Reactions in Ni/Si(100) Contacts” in Jpn. J.
Appl. Phys. vol. 41, pp. 2450-2454, 2002.
[8] J. Foggiato, W.S. Yoo “Integration of Nickel Silicide: Minimizing Defect Generation During Formation” in IEEE/SEMI Advanced Semiconductor Manufacturing Conference , 2005.
b“Thermal stability study of NiSi and NiSi2 thin films” in Microelectronic Engineering , vol .71 , pp.104-111 , 2004.
[10] B. Froment1, M. Muller, H.Brut, R. Pantel, V. Carron, H. Achard, A.Halimaoui,
“Nickel vs. Cobalt Silicide integration for sub-50nm CMOS” in IEEE , 2003.
[11] R. Xiang, K. Nagahiro, T. Shiozawa, P. Ahmet, K. Tsusui, Y. Okuno, M.
Matsumoto, M. Kubota, K. Kakushima and H. Iwai “Irregular Increase in Sheet Resistance of Ni Silicides at Transition Temperature Range from NiSi to NiSi2 Depending on Annealing Time” in ISTC , pp.21-22, 2006.
[12] S. C.H. Ho, M.C. Poon, M. Chan, and H. Wong “ Thermal Stability of Nickel Silicides in Different Silicon Substrates” in IEEE , pp. 105-109 , 1998.
[13] J.G Yun, S.Y Oh, H.H Ji, B.F Huang, Y.H Park, J.S Wang and H.D Lee “Novel NiSi Technology Utilizing Ti/Ni/TiN Structure and Fluorine Implantation for Thermal Stability Improvement by Suppression of Abnormal Oxidation” in IEEE, 2004 .
[14] J.A. Kittl, A. Lauwers, O. Chamirian, M. Van Dal, Akheyar A., De Potter M., Lindsay R., Maex K. “Ni- and Co-based silicides for advanced CMOS applications” in Microelectronic Engineering, vol. 70, pp. 158-165, 2003.
[15] A. Lauwers, A. Steegen, M. d Potter, R. Lindsay, A. Satta, H. Bender, and K. Maex
“Materials aspects, electrical performance, and scalability of Ni silicide towards sub-0.13 µm technologies” in Journal of Vacuum Science & Technology, vol. 19, pp. 2026-2037, 2001.
[16] K. Funk, X. Pagès, V. I. Kuznetsov, E. H.A. Granneman “NiSi CONTACT FORMATION – PROCESS INTEGRATION ADVANTAGES WITH PARTIAL Ni CONVERSION” in Advanced Thermal Processing of Semiconductors, pp94-98 , 2004.
[17] A. S. W. Wong, D. Z. Chi, M. Loomans, D. Ma, M. Y. Lai, W. C. Tjiu, and S. J.
Chua “F-enhanced morphological and thermal stability of NiSi films on BF2-implanted Si(001)” in Appl Phys Lett , Vol. 81, 2002.
[18] L. W. Cheng, S. L. Cheng, J. Y. Chen, L. J. Chen, and Bing-Yue Tsui, “Effects of nitrogen ion implantation of nickel silicide contacts on shallow junction” in Thin Solid Film. vol. 355, pp. 412-416, 1999.
[19] T. Ohguro, S Nakamura, E. Morifuji, M. Ono, “Nitrogen-doped nickel monosilicide technique for deep submicron CMOS salicide” in IEDM vol. 95, pp.
453-456. 1995.
[20] P. S. Lee, K. L. Pey, D. Mangelinck, J. Ding, A. T. S. Wee, and L. Chan
“Improved NiSi Salicide Process Using Presilicide N+2 Implant for MOSFETs” in IEEE Electron Device Letters, vol. 21, pp. 566-568. 2000.
[21] R. T. P. Lee, D. Z. Chi, M. Y. Lai, N. L. Yakovlev, and S. J. Chua “Effects of Ti Incorporation in Ni on Silicidation Reaction and Structural/Electrical Properties of NiSi” in J. Electrochem. Soc, vol. 151, pp. 642-647 2004
[22] S.J. Park, K.W. Lee, J.J. You, J.Y. Kim and K.S. Bae “ Thermal Stability of Ni Monosilicide formed with Ti Capping Layer” in IEEE, pp. 411-414 , 2003.
[23] T.F. Lei and T.S. Chao “ Improvement of Junction Leakage of Nickel Silicided Junction by a Ti-Capping Layer” in IEEE Electron Device Letters,vol. 20 , pp.
572-573, 1999.
[24] Y.Z. Han, Y.P. Qu , Y.L. Jiang, B.L. Xu ,Y.F. Cao, G.P. Ru, B.Z. Li, Chu P.K. “Ni(Pt)Si thin film formation and its electrical characteristics with Si substrate” in Solid-State and Integrated-Circuit Technology , pp. 513-516, 2001.
[25] D. Z. Chi, R. T. P. Lee, and S. J. Chua“ Addressing Materials and Process-integration Issues of Nisi Silicide Process Using Impurity Engineering” in IEEE, pp. 113-118, 2004.
[26] D. Mangelinck, J. Y. Dai, J. S. Pan, and S. K. Lahiri “Enhancement of thermal stability of NiSi films on (100)Si and (111)Si by Pt addition” in Appl Phys Lett , vol.
75, pp.1736-1738 , 1999.
[27] L. W. Cheng, S. L. Cheng, and L. J. Chena “Formation of Ni silicides on (001) Si
[28] P. S. Lee, K. L. Pey, D. Mangelinck, J. Ding, D. Z. Chi, and L. Chan “New Salicidation Technology With Ni(Pt) Alloy for MOSFETs” in IEEE Electron Device Letters, vol. 22, pp. 568-570, 2001.
[29] P. Ranade, H. Takeuchi, W.C. Lee, “Application of Silicon–Germanium in the Fabrication of Ultra-shallow Extension Junctions for Sub-100 nm PMOSFETs” in IEEE Trans. on Electron Devices, vol. 49, pp. 1436-1443 , 2002.
[30] C. Y. Lin, W. J. Chen, C. H. Lai, Albert Chin, Senior Member, IEEE, and J. Liu
“Formation of Ni Germano-Silicide on Single Crystalline Si0.3Ge0.7/Si” in IEEE Electron Device Letters, vol. 23, pp.464-466 , 2002.
[31] T.H. Yang, G. Luo, E.Y. Chang, T.Y. Yang, H.C. Tseng, and C.Y. Chang,
“Study of Nickel Silicide Contact on Si=Si1-xGex” in IEEE Electron Device Letters, vol. 24, pp. 544-546, 2003.
[32] C. Isheden, J. Seger, H. H. Radamson, S.L. Zhang and M. Östling “Formation of Ni mono-germanosilicide on heavily B-doped epitaxial SiGe for ultra-shallow source/drain contacts” in Mat. Res. Soc. Symp. Proc. vol. 745, pp. 1-6 , 2003.
[33] T. Jarmar J. Seger “Morphological and phase stability of nickel–germanosilicide on Si1-xGex under thermal stress” in Journal of Applied Physics vol. 92, pp.
7193-7199, 2002.
[34] Tsu-Jae King, James P. McVittie, Krishna C. Saraswat, Fellow, IEEE, and James R.
Pfiester, Senior Member, lEEE “Electrical Properties of Heavily Doped Polycrystalline Silicon-Germanium Films” in IEEE Trans. on Electron Devices, vol. 41, pp. 228-232, 1994.
[35] J.S. Maa, D.J. Tweet, Y. Ono, L. Stecker, and S.T. Hsu, “Stability Improvement of Nickel Silicide with Co Interlayer on Si, Polysilicon and SiGe” in Mat. Res. Soc.
Symp. Proc. vol. 670 pp.1-6 , 2001 .
[36] S.L. Zhang “Nickel-based contact metallization for SiGe MOSFETs: progress and challenges” in Microelectronic Engineering vol.70 , pp. 174–185, 2003.
[37] P. R. B, P King, E. Paton, S. Robie, “Ge effects on silicidation” in Microelectronic
Engineering vol. 82 , pp.467-473 , 2005.
[38] J.Seger, S.-L. Zhang “Enhanced phase stability and morphological stability of Ni(Si,Ge) onstrained Si0.8Ge0.2” in Thin Solid Films , vol. 429 , pp. 216.-219 , 2003.
[39] W. W. Wu, S. L. Cheng, S. W. Lee, and L. J. Chena “Enhanced growth of low-resistivity NiSi on epitaxial Si0.7Ge0.3 on (001)Si with a sacrificial amorphous Si interlayer” in J. Vac. Sci. Technol, pp.2147-2150 , 2003.
[40] H.B. Yao, D.Z. Chi, S. Tripathy, S.Y. Chow, W.D. Wang, S. J. Chua, H.P. Sun andX.Q. Pan “Effect of Ge-rich Si1-zGez Segregation on the Morphological Stability of NiSi1-uGeu Film Formed on Strained (001) Si0.8Ge0.2 Epilayer ” in Mat. Res.
Soc. Symp. Proc. vol. 810 , pp. 1-6 , 2004.
[41] K. L. Peya W. K. Choi “Thermal reaction of nickel and Si0.75Ge0.25 alloy” in American Vacuum Society , pp. 1903-1910 , 2002.
[42] S. Zhu and A. Nakajima “Annealing Temperature Dependence on Nickel–Germanium Solid-State Reaction” in Interational Workshop on Junction Technology , pp.85-88 , 2005.
[43] M. Ozturk, J. Liu, and H. Mo, “Low resistivity nickel germanosilicide contacts to ultra-shallow silicon-germanium source/drain junctions for nanoscale CMOS,” in IEDM Tech. Dig. , pp. 375–378. , Dec. 2003
[44] S. Gannavaram, N. Pesovic, and M. C. Ozturk, “Low temperature(= 800 ℃) recessed junction selective silicon-germanium source/drain technology for sub-70 nm CMOS,” in IEDM Tech.Dig, pp.437–440 , Dec. 2000
[45] M. Ozturk, J. Liu, H. Mo, and N. Pesovic, “Advanced SiGe source/drainand contact technologies for sub-70 nm CMOS,” in IEDM Tech. Dig, pp. 375–378. Dec.
2002
[46] Jing Liu and Mehmet C. Ozturk “Effects of heavy boron doping on the valence band offset at the Si1–xGex/Si interface and Si1–xGex band gap” in Appl. Phys. Lett.
[47] M. Ozturk, J. Liu, H. Mo, and N. Pesovic “ULTRA-SHALLOW SOURCE/DRAIN JUNCTIONS FOR NANOSCALE CMOS USING SELECTIVE SILICON-GERMANIUM TECHNOLOGY” in international workshop on junction technology ,vol.5 , pp. 1-6 , 2001.
[48] J. Liu, , and M.C. Ozturk, ” Nickel Germanosilicide Contacts Formed on Heavily Boron Doped Si1-xGex Source/Drain Junctionsfor Nanoscale CMOS” in IEEE Trans. on Electron Devices , vol 52 , pp. 1535-1540 , 2005.
[49] S. E. Thompson, M. Armstrong, C. Auth, M. Alavi, M. Buehler, R. Chau, “A 90-nm Logic Technology Featuring Strained-Silicon” in IEEE Trans. on Electron Devices, vol 51, pp. 1-8 , NOVEMBER 2004
[50] C.C. Wang, C.J. Lin, and M.C. Chen “Formation of NiSi-silicided p+n shallow junctions using implant through silicide and low temperature furnace annealing” in Materials Research Society , pp. 557-562, 2003
[51] M. H. Juang, M. C. Hu, C. J. Yang “ Formation of silicided p+n junction by BF2 + implantation into thin amorphous-Si or Ni/amorphous-Si films on Si substrates and subsequent Ni silicidation” in Journal of Vacuum Science &
Technology , pp. 392-396 , 1999.
[52] S. S. Ang “Electrical characteristics of epitaxial pn junction diodes fabricated on germanium-boron-doped silicon” in J. Appl. Phys. vol.78, pp. 1322-1326, 15 July 1995
[53] C. T. Huang, T. F. Lei, C. H. Chu, and S. H. Shvu “The Influence of Ge-Implantation on the Electrical Characteristics of the Ultra-Shallow Junction Formed by Using Silicide as a Diffusion Source” in IEEE Electron Device Letters, vol. 17 , pp. 88-90, 1996.