• 沒有找到結果。

ERP-PBCC 系統之效能

在文檔中 中 華 大 學 (頁 62-68)

第四章 IEEE Std 802.11g™-2003

4.3 ERP-PBCC 基頻軟體傳收機

4.3.3 ERP-PBCC 系統之效能

圖 4-13 與圖 4-14 分別為資料傳輸率每秒 5.5 百萬位元於不同的調變方式下 所得之效能及資料傳輸率每秒 11 百萬位元於不同的調變方式下所得之效能。其 中的調變方式分別為封包二進制迴旋編碼及互補碼鍵控。由此可看出封包二進制 迴旋編碼之效能確實較互補碼鍵控之效能來得好,但相對的,也因為解碼器的使 用而大幅地增加接收端之硬體複雜度。

圖4-12 ERP-PBCC-11 之覆蓋碼解對映軟體實作

2 1

QPSK Interlacer

O E Re(u)

Im(u)

u In

Ph Complex Phase Shift

3

2 1

圖4-13 PBCC-5.5 之效能與 CCK-5.5 之效能的比較

圖4-14 PBCC-11 之效能與 CCK-11 之效能的比較

-3 -2 -1 0 1 2 3 4 5 6 7

10-7 10-6 10-5 10-4 10-3 10-2 10-1 100

SNR (dB)

Bit Error Probability

PBCC-5.5 of unquantized decision ver. CCK-5.5 of coherent demodulation in AWGN channel

PBCC-5.5 CCK-5.5

0 2 4 6 8 10 12

10-7 10-6 10-5 10-4 10-3 10-2 10-1 100

SNR (dB)

Bit Error Probability

PBCC-11 of unquantized decision ver. CCK-11 of coherent demodulation in AWGN channel

PBCC-11 CCK-11

ERP-PBCC-5.5 與 ERP-PBCC-11 使用相同的二進制迴旋編碼器,而對映則分 別為二相位移相調變及四相位移相調變。故上述兩者之誤碼率對位元能量比

(E

b

/N

o

)為同一條曲線;而誤碼率對雜訊比則差了約3dB。圖 4-15 為封包二進 制迴旋編碼模式之四種資料傳輸率於相加性白高斯雜訊通道之誤碼率對雜訊比。

圖 4-16 為封包二進制迴旋編碼模式之四種資料傳輸率於指數遞減瑞利衰減 通道之誤碼率對雜訊比。在指數遞減瑞利衰減通道之下,通道特性變差時會持續 一段時間,造成誤碼率急劇上揚。故原本於相加性白高斯雜訊通道中之下墬的曲 線會被拉直成緩步下降的直線。

圖4-15 封包二進制迴旋編碼模式於相加性白高斯雜訊通道之誤碼率

-4 -2 0 2 4 6 8 10

10-8 10-7 10-6 10-5 10-4 10-3 10-2 10-1 100

SNR (dB)

Bit Error Probability

Performance of unquantized decision of ERP-PBCC in AWGN channel

5.5 Mbit/s 11 Mbit/s 22 & 33 Mbit/s

圖4-16 封包二進制迴旋編碼模式於指數遞減瑞利衰減通道之誤碼率

第五章 結論

本論文以 MathWorks 公司出品的 SIMULINK

®

軟體來建構出 IEEE Std 802.11b-1999、IEEE Std 802.11a-1999 與 IEEE Std 802.11g-2003 的軟體模擬平台,

並將三平台做驗證。最後則以三平台做適應性模式切換的模擬。

本論文的模擬平台為圖形化的界面,且具有即時模擬的能力,故在教學用途 上極具實用性。在硬體實現方面,硬體的各項參數必須在設計電路前就被確定下 來,故模擬平台自然成為求得最佳參數設定的實用工具。而以製作完成的電路方 塊置換平台上相對應的方塊則提供了簡易的電路驗證,這樣便能降低電路整合時 的除錯時程。在實務上,為了在誤碼率與傳輸率間取得平衡,模式的切換是無可 避免的。而模擬平台進階之應用即為切換準則的估測。綜合上述可知本論文所建 構的平台具有多重的功能,而不是只限於單一方面的用途。

參考文獻

[1] IEEE Std.802.11, Part 11: Wireless LAN Medium Access Control (MAC) and Physical Layer (PHY) specifications, June 1997.

[2] IEEE Std.802.11b, Part 11: Wireless LAN Medium Access Control (MAC) and Physical Layer (PHY) specifications Amendment 2: Higher-speed Physical Layer (PHY) extension in the 2.4GHz band, Sep. 1999.

[3] IEEE Std.802.11a, Part 11: Wireless LAN Medium Access Control (MAC) and Physical Layer (PHY) specifications Amendment 1: High-speed Physical Layer in the 5 GHz band, Sep. 16, 1999.

[4] IEEE Std.802.11g, Part 11: Wireless LAN Medium Access Control (MAC) and Physical Layer (PHY) specifications Amendment 4: Further Higher Data Rate Extension in the 2.4 GHz Band, June 12, 2003.

[5] William Camey, “IEEE 802.11g, New Draft Standard Clarifies Future of Wireless LAN”, © 2002 Texas Instruments Incorporated.

[6] Mark Webster and Carl Andren, “HARRIS/LUCENT CCK DESCRIPTION”

[7] Intersil, Data Sheet, Apr. 2000, File Number 4856.

[8] Golay, M.J.E., “Complementary Series”, IRE Trans. on Information Theory, Apr.

1961, pp. 82-87.

[9] Tseng, C.C. and Liu, C.L., “Complementary Sets of Sequences”, IEEE Trans. on Information Theory, vol. IT-18, No. 5, Sep. 1972.

[10] Sivaswamy, R., “Multiphase Complementary Codes”, IEEE Trans. on Information Theory, vol. IT-24, No. 5, Sep. 1978, pp. 546-552.

[11] Frank, Robert L., “Polyphase Complementary Codes”, IEEE Trans. on Information Theory, Nov. 1980.

[12] Carl Andren and Mark Webster, “CCK Modulation Delivers 11Mbps for High

在文檔中 中 華 大 學 (頁 62-68)

相關文件