3.1 CNC
5.2.4 Z
BD-PCD
5-22 BD-PCD
93
Z 4 m
BD-PCD Z
5-23
5-24
(a) (b)
5-22
(a) (b)
5-23 Z
94
(a) (b) Z
5-24 Z
5.2.5
BD-PCD
BD-PCD
5-8 5×5
500 m 700 m 5-25
BD-PCD BD-PCD
5-26(a) 5-27(a) 3D
BD-PCD
Ra 1.29 m BD-PCD Ra 1.58 m 5-26(b)
(c) 5-27(b) (c) BD-PCD
3
m 5-28
95
5-8
NBRA/NBRA-H(D=600 µm) Tungsten carbide
30 µm 30,000 rpm 100 mm/min
Z 5 µm
1 µm
Oil immersion & convection Parallel
(a) (b)
5-25
(a) BD-PCD
96
(b) (c)
5-26 BD-PCD
(a) BD-PCD
(b) (c)
5-27 BD-PCD
BD-PCD
4.2.4
97
F=1 mm/min 25
16
F=100 mm/min 4
10
BD-PCD
5-28 5-29
98
6.1
BD-PCD
BD-PCD
10-15µm BD-PCD
BD-PCD N-Scope
BD-PCD
BD-PCD
1.
2. BD-PCD
3.
-50°
99
4. BD-PCD 0
5. BD-PCD
BD-PCD
6. BD-PCD 1 2
1. BD-PCD
2.
Z
3.
4. BD-PCD
BD-PCD BD-PCD
100
Ra112 nm
( )
1. BD-PCD
Z 4 m
2.
30,000 rpm 100 mm/min
25
4 Ra 1.29 µm
101
6.2
1.
2. BD-PCD
BD-PCD
3.
102
1. M. Jalie, The Principles Ophthalmic Lenses , London: The Association of Dispensing Opticians, 1992
2. , ZnSe ,
http://www.shentong.cc/hongwaixianboli.html
3. T. Zhou, J. Yan, J. Masuda, T. Kuriyagawa, Investigation on the
viscoelasticity of optical glass in ultraprecision lens molding process , Journal of Materials Processing Technology, Vol.209, pp.4484-4489, 2009
4. J. Colegrove, Pocket Projector Technology and Market Forecast , Display Search, 2010
5. , , , Vol.10005,
2011
6. D.A. Axinte, D.S. Srinivasu, M.C. Kong, P.W. Butler-Smith, Abrasive waterjet cutting of polycrystalline diamond:A preliminary investigation , International Journal of Machine Tools & Manufacture, Vol.49,
pp.797-803,2009
7. S.W. Youn, M. Takahashi, H. Goto, R. Maeda, Fabrication of micro-mold for glass embossing using focused ion beam,femto-second laser, eximer laser and dicing techniques , Journal of Materials Processing Technology, Vol.187-188, pp.326-330, 2007
8. G. Chung, Characteristics of SiCN microstructures for harsh environment and high-power MEMS applications , Microelectronics Journal, Vol.38, pp.888-893, 2007
9. D. Keen, Extraneous inclusions in Al/Si alloy pistons: their effect on single crystal and polycrystalline diamond turning tool edges , Wear, Vol. 31,
103
pp.185-188, 1975
10. Z.L. Wang, Q. Luo, L.W. Liu, C.Y. Li, H.X. Yang, H.F. Yang, J.J. Li, X.Y.
Lu, Z.S. Jin, L. Lu, C.Z. Gu, The superconductivity in boron-doped
polycrystalline diamond thick films , Diamond & Related Materials, Vol. 15, pp.659-663, 2006
11. H. Suzuki, T. Moriwaki, Y. Yamamoto, Y. Goto, Precision Cutting of Aspherical Ceramic Molds with Micro PCD Milling Tool , Annals of the CIRP Vol. 56, pp.131-134, 2007
12. K. Suzuki, Y. Shiraishi, N. Nakajima, M. Iwai, S. Ninomiya, Y. Tanaka, T.
Uematsu, Development of New PCD Made Up of Boron Doped Diamond Particles and its Machinability by EDM , Advanced Materials Research, Vol.
76-78, pp. 684-689, 2009
13. C. Nath, M. Rahman, K. S. Neo, Machinability study of tungsten carbide using PCD tools under ultrasonic elliptical vibration cutting , International Journal of Machine Tools & Manufacture, Vol. 49, pp.1089-1095, 2009 14. H. K. Park, H. Onikura, O. Ohnishi, A. Sharifuddin, Development of
micro-diamond tools through electroless composite plating and investigation into micro-machining characteristics , Precision Engineering, Vol. 34, pp.376-386, 2010
15. , CNC
, , pp.112-115, 2011
16. K. Katahira, K. Nakamoto, P. Fonda, H. Ohmori, K. Yamazaki, A novel technique for reconditioning polycrystalline diamond tool surfaces applied for silicon micromachining , CIRP Annals-Manufacturing Technology, Vol. 60, pp.591-594, 2011
104
17. , ,
http://www.stoneoptics.com/newsxx.asp?idx=81 18.
279 2006 pp.43-52
19.
21 2004 pp.5055-5060
20. W.K. Chen, T. Kuriyagawa, H. Huang, N. Yosihara, Machining of micro aspherical mould inserts , Precision Engineering, Vol.29, pp.315-323, 2005 21. K.-S. Jung, H.-M. Kim, S.-J. Lee, N.-C. Park, S.-I. Kang, Y.-P. Park, Design
of optical path of pickup for small form factor optical disk drive , Microsyst Technol, Vol. 11, pp. 1041-1047, 2005
22. C.S. Lim, M.H. Hong, A. Senthil Kumar, M. Rahman, X.D. Liu, Fabrication of concave micro lens array using laser patterning and isotropic etching , International Journal of Machine Tools & Manufacture, Vol. 46, pp. 552-558, 2006
23. Y. Takeuchi, Y. Yoneyama, T. Ishida, T. Kawai, 6-Axis control ultraprecision microgrooving on sculptured surfaces with non-rotational cutting tool , CIRP Annals - Manufacturing Technology, Vol.58, pp.53-56, 2009
24. B. Lee, Kyung J. Cha, T. H. Kwon, Fabrication of polymer
micro/nano-hybrid lens array by microstructured anodic aluminum oxide (AAO) mold , Microelectronic Engineering, Vol. 86, pp. 857-860, 2009 25. J. Yan, Z. Zhang, T. Kuriyagawa, Tool wear control in diamond turning of
high-strength mold materials by means of tool swinging , CIRP Annals - Manufacturing Technology, Vol.59, pp.109-112, 2010
26. T. Zhou, J. Yan, T. Kuriyagawa, Study on nonisothermal glass molding press
105
for aspherical lens , Journal of advanced mechanical design,system,and Manufacturing, Vol. 4, pp. 806-815, 2010
27. J. Yan, Z. Zhang, T. Kuriyagawa, H. Gonda, Fabricating micro-structured surface y using single-crystalline diamond endmill , Int J Adv Manuf Technol, Vol. 51, pp. 957-964, 2010
28. D. H. Cha, H. S. Park, Y. Hwang, J. H. Kim, H. J. Kim, Experimental Study of Glass Molding Process and Transcription Characteristics of Mold Surface in Molding of Aspheric Glass Lenses , Optical review, Vol. 18, pp.241-246, 2011
29. A. Beaucamp, Y. Namba, I. Inasaki, H. Combrinck, R. Freeman, Finishing of optical moulds to l/20 by automated corrective polishing , CIRP Annals - Manufacturing Technology, Vol.60, pp.375-378, 2011
30. Sakshat virtual labs, To study erosion mechanism from Lazarenko's model , http://coep.vlab.co.in/?sub=34&brch=105&sim=237&cnt=1
31. Charmilles technologies ROBOFIL 300, pp. 1.1.4-1.1.5, 1993
32. C. Sommer, Non-traditional machining handbook, Advance Publishing, Inc., pp.117-124, 2000
33. Bilbao, SPAIN, Proceedings of the 13th International Symposium for electromachining isem XIII , May 9th-11th, pp.4, 2001
34. , , , 2011
35. , (
)-, pp. 220-222)-, 2000
36. , - ,
http://eshare.stut.edu.tw/EshareFile/2010_4/2010_4_e1e12437.ppt/
37. K. Okano, Y. Akiba, T. Kurosu, M. Iida, T. akamura, Synthesis of B-doped
106
diamond film , Journal of Crystal Growth, Vol. 99, pp.1192-1195, 1990 38. C. Sommer, Non-traditional machining handbook, Advance Publishing, Inc.,
pp.117-124,2000
39. S. Kalpakjian, S. R. Schmid, Manufacturing engineering and tehnology, Prentice Hall International, 4th edition, pp.803-810, 2001
40. , ,
http://www.sunholy.com.tw/epaper/NO.77/77.pdf
41. , ,
http://www.allma.net/all-induction/tw_af-12kw.php
42. I. S. Kang, J. S. Kim, J. H. Kim, M. C. Kang, Y. W. Seo, A mechanistic model of cutting force in the micro end milling process , Journal of Materials Processing Technology, Vol. 87, pp. 250-255, 2007
43. X. M. Lai, H. T. Li, C. F. Li, Z. Q. Lin, J. Ni, Modelling and analysis of micro scale milling considering size effect, micro cutter edge radius and minimum chip thickness , Journal of Machine Tools and Manufacture, Vol.
48, pp.1-14, 2008
44. S. M. Son, H. S. Lim, J. H. Ahn, Effects of the friction coefficient on the minimum cutting thickness in micro cutting , Journal of Machine Tools and Manufacture, Vol.45, pp.529-535, 2005
45. , Proceeding of Some recent advancement in Micro/Meso scale manufacturing , University of Michigan, 2004
46. , , NTS, ISBN4-8043-059-X C3050,
2004
47. S. Blackeley, R. O. Scattergood, Mechanics of material removal in diamond turning , Proceedings of ASPE Annual Meeting, Rochester NY, USA, pp.
107
68-71, 1990
48. M. Miyashita, Ist Annual Precision Engineering Conference , North Carolina State University, Raleigh, NC, November 1985
49. B. K. A. Ngoi, P. S. Sreejith, Ductile Regime Finish Machining-A Review , Int J Adv Manuf Technol, Vol. 16, pp. 547-550, 2000
50. , , http://zh.wikipedia.org/wiki/%E8%85%90%E8%9A%80
51. , , B1 edition, 2008
52. NAKANISHI INC., Motors& Spindles Micro-grinders, 9th edition, pp.2-9&2-29, 2008
53. ,
http://www.or.com.tw/uploads/product/OR_Vcenter_55_70.pdf
54. ,
, , pp. 67-68, 2011
55. Yung-Tien Liu, Wei-Che Chang, Yutaka Yamagata, A study on optimal compensation cutting for an aspheric surface using the Taguchi method , Vol.
3, pp.40-48, 2010
56. , MasterCAM X5 , http://www.mastercam.com.tw/
57. , , http://www.aixon.com.tw/
58. ,
59. KEYEMCE,
60. ,
61. HORIBA, ,
http://www.horiba.com/cn/scientific/products/raman-spectroscopy/raman-syst ems/research-raman/details/t64000-140/
62. , BD-PCD ,
108
http://www.factdiamond.com/contact/main.htm
63. ,
64. ,
http://www.taiwanservices.com.tw/org2/0/company_detail/zh_TW/158478 65. Davis, J. R., "ASM Specialty Handbook, Tool Materials", ASM International,
Materials Park, OH 440730002, pp.88, 1995
66. J.L Meriam, L.G.Kraige, Engineering mechanics dynamics, 5th edition, pp.56-58, 2003
67. T.R. Anthony, W.F. Banholzer, J.F. Fleischer, L. Wei, P.K. Kuo, R.L. Thomas, and R.W. Pryor, Thermal diffusivity of isotopically enriched 12C diamond, PHYSICAL REVIEW B, Vol.42, No.2, pp.1104-1111, 1990
68. Y.A. Cengel, Heat and mass transfer, a practical approach, 3rd, McGraw-Hill, pp.74-77, 2006
69. , , , , ,
pp.275-350, 1990
70. T.Tawakoli, M.J. Hadad, M.H. Sadeghi, Influence of mist parameters on minimum quantity lubrication- MQL grinding process, International Journal of Machine Tools & Manufacture, Vol. 50, pp. 521-531, 2010
71. Taylor F W, On the art of cutting metals, Transactions of ASME, Vol.28, pp.
31-58, 1907
72. Shane A. Catledge, Yogesh K. Vohra, Ram Ladi, Ghanshyam Rai, Micro-Raman stress investigations and X-ray diffraction analysis of
polycrystalline diamond (PCD) tools, Diamond and Telated Materials, Vol. 5, pp. 1159-1165, 1996
02-29378384 0916-621188 [email protected]
(2012)
(2008) (2004)