Future works

We will functionalize the surface of each pore with acidic functional groups using various surface chemistry. By controlling the aspect ratio of our V-shaped channel and reducing its tip diameter down to the order of 10 nm, we hope to manage the fuel crossover problem for future micro fuel cells.

References

[1] G. Hoogers, ed., “Fuel Cell Technology Handbook” CRC Press, 2003.

[2] J. Bockris, S. Srinivasan, “Fuel Cells, Their Electrochemistry, 1st Ed.”, McGraw-Hill, 659 pages, New York, USA, 1969.

[3] S. Møller-Holst, “Solid Polymer Fuel Cells: Electrode and Membrane Performance Studies”, Department of Physical Chemistry, Norwegian University of Science and Technology, Trondheim, Norway, doctoral thesis, 1996.

[4] S. Srinivasan, E. Ticianelli, C. Derouin, A. Redondo, “Advanced in solid polymer electrolyte fuel cell technology with low platinum loading electrodes”, J. Power Sources 22 , pp. 359-375, 1988.

[5] E. Ticianelli, C. Derouin, A. Redondo, S. Srinivasan, “Methods to Advance Technology of Proton Exchange Membrane Fuel Cells”, J. Electrochem. Soc. 135, pp. 2209-2214, 1988.

[6] S. Srinivasan, D. Manko, H. Koch, M. Enayetullah, A. Appleby, “Recent Advances in Solid Polymer Electrolyte Fuel Cell Technology with Low Pt Loading Electrodes”, J.

Power Sources 29, pp. 367-387, 1990.

[7] M. Wilson, S. Gottesfeld, “Thin-film catalyst layers for polymer electrolyte fuel cell electrodes”, J. Appl. Electrochem. 22, pp. 1-7, 1992.

[8] X. Ren, T.E. Springer, S. Gottesfeld, “Water and methanol uptakes in Nafion membranes and membrane effects on direct methanol cell performance”, J. Electrochem. Soc. 147 (1), pp. 92–98, 2000.

[9] P. Dimitrova, K.A. Friedrich, U. Stimming, B. Vogt, “Modified Nafion^® based membranes for use in direct methanol fuel cells”, Solid State Ionics 150, pp. 115–122, 2002.

[10] N. Caretta, V. Tricoli, F. Picchioni, “Ionomeric membranes based on partially sulfonated poly(styrene): synthesis, proton conduction and methanol permeation”, J. Membr. Sci.

166, pp. 189–197, 2000.

[11] D.H. Jung, S.Y. Cho, D.H. Peck, D.R. Skin, J.S. Kim, “Performance evaluation of a Nafion/silicon oxide hybrid membrane for direct methanol fuel cell”, J. Power Sources 106, pp. 173–177, 2002.

[12] T. Yamaguchi, M. Ibe, B.N. Nair, S. Nakao, “A pore-filling electrolyte membrane-electrode integrated system for a direct methanol fuel cell application”, J.

Electrochem. Soc. 149 (11), pp. 1448-1453, 2002.

[13] S. C. Kelley, G. A. Deluga, and W. H. Smyrl, “Miniature Fuel Cells Fabricated on Silicon Substrates”, AIChE J. 48, pp. 1071-1082, 2002.

[14] J. Yu, P. Chenga, Z. Ma, B. Yi, “Fabrication of miniature silicon wafer fuel cells with improved performance”, J. Power Sources 124, pp. 40-46, 2003.

[15] J. P. Meyers, H. L. Maynard, “Design considerations for miniaturized PEM fuel cells”, J.

Power Sources 109, pp. 76–88, 2002.

[16] S. Motokawa, M. Mohamedi, T. Momma, S. Shoji, T. Osaka, “MEMS-based design and fabrication of a new concept micro direct methanol fuel cell (µ-DMFC)”, Electrochem.

Commun. 6, pp. 562-565, 2004.

[17] T. Pichonat, B. Gauthier-Manuel, “Realization of porous silicon based miniature fuel cells”, J. Power Sources 154, pp. 198-201, 2006.

[18] G.D’Arrigo, C. Spinella, G. Arena, S. Lorenti, “Fabrication of miniaturised Si-based electrocatalytic membranes”, Materials Sci. and Eng. C23, pp. 13–18, 2003.

[19] J. Yeom, G.Z. Mozsgai, B.R. Flachsbart, E.R. Choban, A. Asthana, M.A. Shannon, P.J.A.

Kenis, “Microfabrication and characterization of a silicon-based millimeter scale, PEM fuel cell operating with hydrogen, methanol, or formic acid”, Sensors and Actuators B107, pp. 882–891, 2005.

[20] T. Pichonat, B. Gauthier-Manuel, D. Hauden, “A new proton-conducting porous silicon membrane for small fuel cells”, Chem. Eng. J. 101, pp. 107-111, 2004.

[21] G. Alberti, M. Casciola, “Solid state protonic conductors, present main applications and future prospects”, Solid State Ionics 145, pp. 3-16, 2001.

[22] A. Appleby, F. Foulkes, “Fuel Cell Handbook”, Van Nostrand Reinhold, 762 pages, New York, USA, 1989.

[23] M. Wilson, S. Gottesfeld, “Thin-film catalyst layers for polymer electrolyte fuel cell electrodes”, J. Appl. Electrochem. 22, pp. 1-7, 1992.

[24] T. Mennola, “Design and Experimental Characterization of Polymer Electrolyte Membrane Fuel Cells”, Helsinki University of Technology, Department of Engineering Physics and Mathematics, Licentiate’s thesis, 2000.

[25] D. Davies, P. Adcock, M. Turpin, S. Rowen, “Stainless steel as a bipolar plate material for solid polymer fuel cells”, J. Power Sources 86, pp. 237-242, 2000.

[26] D. Davies, P. Adcock, M. Turpin, S. Rowen, “Bipolar plate materials for solid polymer fuel cells”, J. Appl. Electrochem. 30, pp. 101-105, 2000.

[27] T. Besmann, J. Klett, J. Henry Jr., E. Lara-Curzlo, “Carbon/carbon Composite Bipolar Plate for Proton Exchange Membrane Fuel Cells”, J. Electrochem. Soc. 147, pp.

4083-4086, 2000.

[28] D. Busick, M. Wilson, “Low-Cost Composite Bipolar Plates for PEFC Stacks”, Proc. - Electrochem. Soc. Vol. 98-27, (Proton Conducting Membrane Fuel Cells II), pp.

435-445.

[29] I. Levine, “Physical Chemistry”, McGraw-Hill, Inc., 847 pages, 1979.

[30] J. Koryta, J. Dvořák, L. Kavan, “Principles of Electrochemistry”, 2nd ed., John Wiley &

Sons, Ltd., 486 pages, Chichester, UK, 1993.

[31] E. Wakefield, “History of the electric Automobile, Battery-Only Powered Cars”, 1st ed., Society of Automobile Engineers, Inc., Warrendale, PA, USA, 1994.

[32] T. Springer, M. Wilson, S. Gottesfeld, “Modeling and Experimental Diagnostics in Polymer Electrolyte Fuel Cells”, J. Electrochem. Soc. 140, pp. 3513-3526, 1993.

[33] W. Wruck, R. Machado, T. Chapman, “Current Interruption-Instrumentation and Applications”, J. Electrochem. Soc. 134, pp. 539-546, 1987.

[34] F. Büchi, A. Marek, G. Scherer, “In Situ Membrane Resistance Measurements in Polymer Electrolyte Fuel Cells by Fast Auxiliary Current Pulses”, J. Electrochem. Soc.

142, pp. 1895-1901.

[35] T. Springer, T. Zawodzinski, M. Wilson, S. Gottesfeld, “Characterization of Polymer Electrolyte Fuel Cells Using AC Impedance Spectroscopy”, J. Electrochem. Soc. 143(2), pp. 587-599, 1996.

[36] T. Zawodzinski, T. Springer, J. Davey, R. Jestel, C. Lopez, J. Valerio, S. Gottesfeld, “A comparative study of water uptake by and transport through ionomeric fuel cell membranes”, J. Electrochem. Soc. 140, pp. 1981-1985, 1993.

[37] G. Janssen, M. Overvelde, “Water transport in the proton-exchangemembrane fuel cell:

measurements of the effective drag coefficient”, J. Power Sources 101, pp. 117-125, 2001.

[38] J. Kolde, B. Bahar, M. Wilson, T. Zawodzinski, S. Gottesfeld, “Advanced composite polymer electrolyte fuel cell membranes”, Proc. - Electrochem. Soc. Vol. 95-23, (Proton Conducting Membrane Fuel Cells I), pp. 193-201.

[39] M. Watanabe, H. Uchida, Y. Seki, M. Emori, & P. Stoneheart, “Self- Humidifying Polymer Electrolyte Membranes for Fuel Cells”, J. Electrochem. Soc. 143(12), pp.

3847-3852, 1996; M. Watanabe, “Solid polymer electrolyte fuel cell”, European Patent Application EP 589 535 A1, Bulletin 94/13, 1994.

[40] A. West, T. Fuller, “Influence of rib spacing in proton-exchange membrane electrode assemblies”, J. Appl. Electrochem. 26, pp. 557-565, 1996.

[41] N. Djilali, D. Lu., “A multi-component, multi-dimensional model for heat and mass transport in proton-exchange membrane fuel cells”, In: Proceedings of the 1998 Fuel Cell Seminar 16.-19.11, Palm Springs, California, USA, 1998.

[42] T. Zawodzinski, S. Gottesfeld, S. Stoichet, T. McCarthy, “The contact angle between water and the surface of perfluorosulfonic acid membranes”, J. Appl. Electrochem. 23(1), pp. 86-88, 1993.

[43] Donald A. Neamen, “Semiconductor Physics and Devices”, McGraw-Hill Higher Education, 2003.

[44] L. Walter, “Silicon microstructuring technology”, Materials science and engineering, R17, pp. 1-55, 1996.

[45] D. B. Lee, “Anisotropic etching of silicon “, Journal of Applied physics, Vol. 40, No. 11, pp. 4569-4574, 1969.

[46] P. J. Hesketh, C. Ju, and S. Gowda, “Surface free energy model of silicon anisotropic etching”, J. Electrochem. Soc., Vol.140, No.4, pp. 1080-1084, 1993.

[47] H. Seidel, L. Csepregi, A. Heuberger, and H. Baumgartel, “Anisotropic etching of crystalline silicon in alkaline solution-Part I. Orientation dependence and behavior of passivation layer”, J. Electrochem. Soc., Vol. 137, No. 11, pp. 3612-3626, 1990.

[48] H. Seidel, L. Csepregi, A. Heuberger, and H. Baumgartel, “Anisotropic etching of crystalline silicon in alkaline solution-Part II. Influence of dopants”, J. Electrochem. Soc., Vol. 137, No. 11, pp. 3626-3632, 1990.

[49] D. R. Ciarlo, “Corner compensation structures for (110) oriented silicon”, IEEE Micro Robots and Teleoperators Workshop, pp. 6/1-4, 1987.

[50] Seidel H., “The Mechanism of Anisotropic , Electrocheical Silicon Etching in Alkaline Solution” IEEE Solid –State Sensor and Actuator Workshop, Hilton Head Island, pp.

86-91, 1990.

[51] E. D. Palik, O. J. Glembocki, I. Heard, P. S. Burno, L. Tenerz, “Etching roughness for (100) silicon surfaces in aqueous KOH”, J. Appl. Phys. 70 (6), pp. 3291-3300, 1991.

[52] T. Baum, D. J. Schiffrin, “AFM study of surface finish improvement by ultrasound in the anisotropic etching of Si<100> in KOH for micromachining applications”, J. Micromech.

Microeng. Number 4, pp. 338-342, 1997.

[53] S. S. Tan, M. L. Reed, H. Han, R. Boudreau, “Mechanisms of etch hillock formation”, J. Micro Electro Mechanical Systems, Vol. 5, No. 1, pp. 66-72, 1996.

[54] Y. K. Bhatnagar and A. Nathan, “On pyramidal protrusions in anisotropic etching of

<100> silicon”, Sensors and Actuators A, Vol. A36, pp. 233-240, 1993.

[55] W. K. Choi, J. T. L. Luo, P. Tan, C. M. Chua, T. H. and Y. Bai, “Characterisation of pyramid formation arising from the TMAH etching of silicon”, Sensors and Actuators A, Vol. A71, pp. 238-243, 1998.

[56] L. M. Landsberger, S. Naseh, M. Kahrizi and M. Paranjape, “On hillocks generated during anisotropic etching of Si in TMAH”, Journal of Microelectromechanical System, Vol. 5, No. 2, pp. 106-116, 1996.