This command returns configuration information about the storage subsystem. The parameters return lists of values for the components and features in the storage subsystem. You can enter the command with a single parameter or more than one parameter. If you enter the command without any parameters, the entire storage subsystem profile is shown (which is the same information as if you entered the profileparameter).
Syntax
show storageSubsystem autoSupportConfig profile batteryAge connections defaultHostType healthStatus hostTypeTable hotSpareCoverage features time logicalDriveDistribution summary
Parameters
Parameter Description
autoSupportConfig The parameter to show the status of the automatic support data collection when a critical event occurs along with the location where the Support Data bundle was saved.
profile The parameter to show all of the properties of the logical components and the physical components that comprise the storage subsystem. The information appears in several screens.
batteryAge The parameter to show the status, the age of the battery in days, and the number of days until the battery needs to be replaced.
connections The parameter to show a list of where the drive channel ports are located and where the drive channels are connected.
defaultHostType The parameter to show the default host type and the host type index.
healthStatus The parameter to show the health, logical properties, and physical component properties of the storage subsystem.
hostTypeTable The parameter to show a table of all of the host types that are known to the controller. Each row in the table shows a host type index and the platform that the host type index represents.
hotSpareCoverage The parameter to show information about which logical drives of the storage subsystem have hot spare coverage and which logical drives do not.
features The parameter to show a list of the feature identifiers for all enabled features in the storage subsystem.
time The parameter to show the current time to which both controllers in the storage subsystem are set.
logicalDriveDistribution The parameter to show the current controller owner for each logical drive in the storage subsystem.
summary The parameter to show a concise list of information about the storage subsystem configuration.
Notes
The profile parameter shows detailed information about the storage subsystem.
The information appears on several screens on a display monitor. You might need to increase the size of your display buffer to see all of the information. Because this information is so detailed, you might want to save the output of this parameter to a file. To save the output to a file, run the show storageSubsystem command that looks like this example:
c:\...\...\client>smcli 123.45.67.89 -c “show storageSubsystem profile;” -o
“c:\\folder\\storageSubsystemprofile.txt”
The previous command syntax is for a host that is running a Windows operating system. The actual syntax varies depending on your operating system.
The DS3950, DS4800 (models 82, 84, and 88), DS5020, DS5100, and DS5300 controller modules do not support the show storageSubsystem batteryAge command.
The batteryAge parameter returns information in this form.
Battery status: Optimal
Location: Controller in slot A Age: 1026 day(s)
Days until replacement: 2,664 day(s) Battery status: Optimal
Location: Controller in slot B Age: 1028 day(s)
Days until replacement: 2,662 day(s)
The defaultHostType parameter returns information in this form.
Default host type: Windows 2000/Server 2003/Server 2008 Non-Clustered (Host type index 2)
The healthStatus parameter returns information in this form.
Storage Subsystem health status = optimal
The hostTypeTable parameter returns information in this form.
NVSRAM HOST TYPE DEFINITIONS
NOTE: The following indexes are not used: 16, 18 - 31
HOST TYPE ADT STATUS ASSOCIATED INDEX
AIX Disabled 6
X-ADT/AVT Enabled 4
FAULT Disabled 0
HP-UX Enabled 7
HPXTPGS Disabled 17
IBM TS SAN VCE Enabled 12
Irix Disabled 10
LNXCLVMWARE Disabled 13
Linux Enabled 5
Netware Failover Enabled 11
Solaris (with Veritas DMP) Enabled 14
Solaris (with or without MPXIO) Disabled 8
Unused1 Enabled 1
Windows 2000/Server 2003/Server 2008 Clustered Disabled 3 Windows 2000/Server 2003/Server 2008 Clustered
Supports DMP) Enabled 15
Windows 2000/Server 2003/Server 2008 Non-Clustered Disabled 2 (Default) Windows 2000/Server 2003/Server 2008 Non-Clustered
(supports DMP) Enabled 9
The hotSpareCoverage parameter returns information in this form:
The following arrays are not protected: None - All arrays are protected Total hot spare drives: 2
Standby: 2 In use: 0
Standby drive at enclosure 1, slot 8 (Fibre, 279.397 GB) Protects the following arrays: 0, 2
Standby drive at enclosure 3, slot 16 (SATA, 698.638 GB) Protects the following arrays: 1
The features parameter returns information in this form:
storagePartition8 mixedDriveTypes flashcopy2
The time parameter returns information in this form:
Controller in Slot A
Date/Time: Tue Jan 27 20:13:40 EST 2009 Controller in Slot B
Date/Time: Tue Jan 27 20:13:32 EST 2009
The logicalDriveDistribution parameter returns information in this form:
Number of arrays: 5
Name: 1
Status: Optimal
Capacity 1.064 TB
RAID level: 6
Drive type: Fibre Channel/Full Disk Encryption(FDE) Enclosure loss protection: No
Security Capable: Yes
Secure: Yes
Current owner: Controller in slot A,B
Associated logical drives and free capacity
Logical Drive Capacity Secure_Middle_R6_A 500.000 GB Secure_Middle_R6_B 510.000 GB Free Capacity 79.857 GB
Associated drives - present (in piece order)
Enclosure Slot
2 3
2 4
2 5
2 6
2 7
2 12
4 2
4 4
4 7
4 8
Name: FC_R3
Status: Optimal
Capacity 836.688 GB
RAID level: 3
Drive type: Fibre channel
Enclosure loss protection: No
Security Capable: No
Secure: No
Current owner: Controller in slot A,B
Associated logical drives and free capacity
Logical Drive Capacity
FC_R3_A 400.000 GB
FC_R3_B 420.000 GB
Free Capacity 16.688 GB
Associated drives - present (in piece order)
Enclosure Slot
4 9
4 12
4 14
4 16
Name: FDE_R6
Status: Optimal
Capacity 817.381 GB
RAID level: 6
Drive type: Fibre Channel/Full Disk Encryption(FDE) Enclosure loss protection: No
Security Capable: Yes
Secure: Yes
Current owner: Controller in slot A,B
Associated logical drives and free capacity
Logical Drive Capacity
FDE_R6_A 400.000 GB
FDE_R6_B 410.000 GB
Free Capacity 7.381 GB
Associated drives - present (in piece order)
Enclosure Slot
2 1
2 2
2 13
2 15
2 16
4 5
4 6
4 3
Name: Sata_Raid6
Status: Optimal
Capacity 2.727 TB
RAID level: 6
Drive type: Serial ATA (SATA)
Enclosure loss protection: No
Security Capable: No
Secure: No
Current owner: Controller in slot A,B
Associated logical drives and free capacity
Logical Drive Capacity Sata_Raid6_A 1,000.000 GB Sata_Raid6_B 1,000.000 GB Free Capacity 792.550 GB
Associated drives - present (in piece order)
Enclosure Slot
2 8
2 9
2 10
2 11
4 1
4 13
Name: Secure_R1
Status: Optimal
Capacity 278.897 GB
RAID level: 1
Drive type: Fibre Channel/Full Disk Encryption(FDE) Enclosure loss protection: No
Security Capable: Yes
Secure: Yes
Current owner: Controller in slot B
Associated logical drives and free capacity
Logical Drive Capacity
FDE_R1 278.000 GB
Free Capacity 918.295 MB
Associated drives - present (in piece order)
Enclosure Slot
4 15 [mirrored pair with drive at enclosure 4, slot 10]
4 10 [mirrored pair with drive at enclosure 4, slot 15]