Alphabetic command list
6.14. xx.xx adds the discreteLinesDiagnosticTest parameter Diagnose Remote Mirror
DS3000: 7.7x.xx.xx DS4000: 6.1x.xx.xx DS5000: 7.3x.xx.xx
Disable Storage Subsystem Feature DS3000: 6.17.xx.xx
DS4000: 5.2x.xx.xx DS5000: 7.3x.xx.xx
Note:6.1x.xx.xx adds mixedDriveTypes parameter Download Drive Firmware
DS3000: 6.17.xx.xx
DS4000: 6.1x.xx.xx DS5000: 7.3x.xx.xx
Note:For version 7.60.xx.xx, you can change the drive parameter to accommodate the enclosures with internal disk drawers
Download Environmental Card Firmware DS3000: 6.17.xx.xx
DS4000: 5.2x.xx.xx DS5000: 7.3x.xx.xx
Download Storage Subsystem Drive Firmware DS3000: 6.17.xx.xx
DS4000: 5.2x.xx.xx DS5000: 7.3x.xx.xx
Download Storage Subsystem Firmware/NVSRAM DS3000: 6.17.xx.xx
DS4000: 5.2x.xx.xx DS5000: 7.3x.xx.xx Enable Array Security
DS3000: Not supported DS4000: Not supported DS5000: 7.5x.xx.xx Enable Controller
DS3000: 6.17.xx.xx DS4000: 6.1x.xx.xx DS5000: 7.3x.xx.xx
Enable Storage Subsystem Feature Key DS3000: 6.17.xx.xx
DS4000: 6.1x.xx.xx DS5000: 7.3x.xx.xx
Note:6.5x.xx.xx adds the featurePack parameter
Note:7.5x.xx.xx adds the highPerformanceTier parameter Export Storage Subsystem Security Key
DS3000: 7.7x.xx.xx DS4000: Not supported DS5000: 7.5x.xx.xx
Import Storage Subsystem Security Key DS3000: 7.7x.xx.xx
DS4000: Not supported DS5000: 7.5x.xx.xx Recopy Volume Copy
DS3000: 6.17.xx.xx DS4000: 6.1x.xx.xx
DS5000: 7.3x.xx.xx Recover RAID Logical Drive
DS3000: 6.17.xx.xx DS4000: 5.43.xx.xx DS5000: 7.3x.xx.xx
Note:For version 7.60.xx.xx, you can change the drive/drives parameter to accommodate the enclosures with internal disk drawers
Recreate Enhanced Remote Mirroring Repository Logical Drive DS3000: 7.7x.xx.xx
DS4000: 6.1x.xx.xx DS5000: 7.3x.xx.xx
Note:For version 7.60.xx.xx, you can change the repositoryDrive parameter to accommodate the enclosures with internal disk drawers
Recreate FlashCopy DS3000: 6.17.xx.xx DS4000: 5.2x.xx.xx DS5000: 7.3x.xx.xx
Remove Logical Drive LUN Mapping DS3000: 6.17.xx.xx
DS4000: 6.1x.xx.xx DS5000: 7.3x.xx.xx Remove Remote Mirror
DS3000: 7.7x.xx.xx DS4000: 6.1x.xx.xx DS5000: 7.3x.xx.xx Remove Volume Copy
DS3000: 6.17.xx.xx DS4000: 5.4x.xx.xx DS5000: 7.3x.xx.xx Repair Logical Drive Parity
DS3000: 6.17.xx.xx DS4000: 6.1x.xx.xx DS5000: 7.3x.xx.xx Replace Drive
DS3000: 6.17.xx.xx DS4000: 7.1x.xx.xx DS5000: 7.3x.xx.xx
Note:For version 7.60.xx.xx, you can change the drive parameter to accommodate the enclosures with internal disk drawers
Reset Controller
DS3000: 6.17.xx.xx
DS4000: 5.2x.xx.xx DS5000: 7.3x.xx.xx
Reset Storage Subsystem Battery Install Date DS3000: 6.17.xx.xx
DS4000: 6.1x.xx.xx DS5000: 7.3x.xx.xx
Note:7.3x.xx.xx and higher adds the ability to reset the battery installation dates on specific batteries that are inside the enclosure
Reset Storage Subsystem Diagnostic Data DS3000: 6.17.xx.xx
DS4000: 6.16.xx.xx DS5000: 7.3x.xx.xx
Reset Storage Subsystem iSCSI Baseline DS3000: 6.50.xx.xx
DS4000: Not supported DS5000: 7.6x.xx.xx
Reset Storage Subsystem Logical Drive Distribution DS4000: 6.17.xx.xx
DS4000: 5.2x.xx.xx DS5000: 7.3x.xx.xx
Reset Storage Subsystem RLS Baseline DS3000: 6.17.xx.xx
DS4000: 5.4x.xx.xx DS5000: 7.3x.xx.xx
Reset Storage Subsystem SOC Baseline DS3000: Not supported
DS4000: 6.16.xx.xx DS5000: 7.3x.xx.xx Resume Remote Mirror
DS3000: 7.7x.xx.xx DS4000: 6.1x.xx.xx DS5000: 7.3x.xx.xx Revive Array
DS3000: 6.17.xx.xx DS4000: 6.1x.xx.xx DS5000: 7.3x.xx.xx Revive Drive
DS3000: 6.17.xx.xx DS4000: 5.43.xx.xx DS5000: 7.3x.xx.xx
Note:For version 7.60.xx.xx, you can change the drive parameter to accommodate the enclosures with internal disk drawers
Save Controller NVSRAM DS3000: 6.17.xx.xx DS4000: 6.1x.xx.xx DS5000: 7.3x.xx.xx
Save Drive Channel Fault Isolation Diagnostic Status DS3000: Not supported
DS4000: Not supported DS5000: 7.3x.xx.xx Save Drive Log
DS3000: 6.17.xx.xx DS4000: 6.1x.xx.xx DS5000: 7.3x.xx.xx
Save Storage Subsystem Configuration DS3000: 6.17.xx.xx
DS4000: 6.1x.xx.xx DS5000: 7.3x.xx.xx
Save Storage Subsystem Diagnostic Data DS3000: 6.17.xx.xx
DS4000: 6.16.xx.xx DS5000: 7.3x.xx.xx Save Storage Subsystem Events
DS3000: 6.17.xx.xx DS4000: 6.1x.xx.xx DS5000: 7.3x.xx.xx
Save Storage Subsystem iSCSI Statistics DS3000: 6.50.xx.xx
DS4000: Not supported DS5000: 7.6x.xx.xx
Save Storage Subsystem Performance Statistics DS3000: 6.17.xx.xx
DS4000: 6.1x.xx.xx DS5000: 7.3x.xx.xx
Save Storage Subsystem RLS Counts DS3000: 6.17.xx.xx
DS4000: 6.1x.xx.xx DS5000: 7.3x.xx.xx
Save Storage Subsystem SOC Counts DS3000: Not supported DS4000: 6.16.xx.xx
DS5000: 7.3x.xx.xx
Save Storage Subsystem State Capture DS3000: 6.17.xx.xx
DS4000: 6.1x.xx.xx DS5000: 7.3x.xx.xx
Save Storage Subsystem Support Data DS3000: 6.17.xx.xx
DS4000: 6.1x.xx.xx DS5000: 7.3x.xx.xx Set Array
DS3000: 6.17.xx.xx DS4000: 6.10.xx.xx DS5000: Not supported
Note:RAID 6 is supported with 7.xx.xx.xx and higher Note:7.30.xx.xx removes the availability parameter
Note:For version 7.60.xx.xx, you can change the addDrive parameter to accommodate the enclosures with internal disk drawers
Set Array Forced State DS3000: 6.17.xx.xx DS4000: 7.1x.xx.xx DS5000: 7.3x.xx.xx Set Controller
DS3000: 6.17.xx.xx DS4000: 6.14.xx.xx DS5000: 7.3x.xx.xx
Note:7.30.xx.xx removed the bootp parameter and added the new Ethernet port options and the new iSCSI host-port options
Note:7.50.xx.xx moved the IPV4Gateway parameter and the
IPV6RouterAddressparameter from the iSCSI host port options, to the command
Set Controller Service Action Allowed Indicator DS3000: 6.17.xx.xx
DS4000: 6.16.xx.xx DS5000: 7.3x.xx.xx
Set Drawer Service Action Allow Indicator DS3000: N/A
DS4000: N/A DS5000: 7.60.xx.xx Set Drive Channel Status DS3000: 6.17.xx.xx DS4000: 5.2x.xx.xx
DS5000: 7.3x.xx.xx Set Drive Hot Spare
DS3000: 6.17.xx.xx DS4000: 5.2x.xx.xx DS5000: 7.3x.xx.xx
Set Disk Drive Service Action Allow Indicator DS3000: 6.17.xx.xx
DS4000: 5.2x.xx.xx DS5000: 7.3x.xx.xx Set Drive State
DS3000: 6.17.xx.xx DS4000: 5.2x.xx.xx DS5000: 7.3x.xx.xx
Note:For version 7.60.xx.xx, you can change the drive parameter to accommodate the enclosures with internal disk drawers
Set Enclosure Alarm DS3000: 6.17.xx.xx DS4000: 6.16.xx.xx DS5000: 7.3x.xx.xx Set Enclosure Identification
DS3000: 6.17.xx.xx DS4000: 6.1x.xx.xx DS5000: 7.3x.xx.xx Note:
v 6.14.xx.xx adds support for DS4800
v 6.16.xx.xx adds support for subsystems and enclosures that set enclosure IDs through the controller firmware
Set Enclosure Service Action Allowed Indicator DS3000: 6.17.xx.xx
DS4000: 6.1x.xx.xx DS5000: 7.3x.xx.xx Note:
v 6.14.xx.xx adds the powerfan and interconnect parameters v 6.16.xx.xx adds the enclosure and esm parameters
Set FlashCopy Logical Drive DS3000: 6.17.xx.xx DS4000: 6.1x.xx.xx DS5000: 7.3x.xx.xx Set Foreign Drive to Native
DS3000: 7.xx.xx.xx DS4000: 7.xx.xx.xx
DS5000: 7.3x.xx.xx
Note:For version 7.60.xx.xx, you can change the drive parameter to accommodate the enclosures with internal disk drawers
Set Host
DS3000: 6.17.xx.xx DS4000: 6.1x.xx.xx DS5000: 7.3x.xx.xx Set Host Channel
DS3000: 6.17.xx.xx DS4000: 6.1x.xx.xx DS5000: 7.3x.xx.xx Set Host Group
DS3000: 6.17.xx.xx DS4000: 6.1x.xx.xx DS5000: 7.3x.xx.xx Set Host Port
DS3000: 6.17.xx.xx DS4000: 6.1x.xx.xx DS5000: 7.3x.xx.xx Set iSCSI Initiator
DS3000: 6.50.xx.xx DS4000: Not supported DS5000: 7.6x.xx.xx Set iSCSI Target Properties
DS3000: 6.50.xx.xx DS4000: Not supported DS5000: 7.6x.xx.xx Set Logical Drive
DS3000: 6.17.xx.xx DS4000: 5.2x.xx.xx DS5000: 7.3x.xx.xx
Note:7.1.xx.xx adds the preReadRedundancyCheck parameter
Note:For version 7.60.xx.xx, you can change the addDrive parameter to accommodate the enclosures with internal disk drawers
Set Remote Mirror DS3000: 7.7x.xx.xx DS4000: 6.1x.xx.xx DS5000: 7.3x.xx.xx Set Session
DS3000: 6.17.xx.xx DS4000: 5.2x.xx.xx
DS5000: 7.3x.xx.xx Set Storage Subsystem
DS3000: 6.17.xx.xx DS4000: 5.2x.xx.xx DS5000: 7.3x.xx.xx Note:
v 5.4x.xx.xx adds the failoverAlertDelay parameter v 6.1x.xx.xx adds the alarm parameter
Set Storage Subsystem Enclosure Positions DS3000: 6.17.xx.xx
DS4000: 6.1x.xx.xx DS5000: 7.3x.xx.xx
Note:For 6.14.xx.xx and 6.16.xx.xx, controller is not a valid value Set Storage Subsystem ICMP Response
DS3000: 6.50.xx.xx (DS3300 only) DS4000: 7.1x.xx.xx
DS5000: 7.3x.xx.xx
Set Storage Subsystem iSNS Server IPv4 Address DS3000: 6.50.xx.xx
DS4000: N/A DS5000: 7.6x.xx.xx
Set Storage Subsystem iSNS Server IPv6 Address DS3000: 6.50.xx.xx
DS4000: N/A DS5000: 7.6x.xx.xx
Set Storage Subsystem iSNS Server Listening Port DS3000: 6.50.xx.xx
DS4000: N/A DS5000: 7.6x.xx.xx
Set Storage Subsystem iSNS Server Refresh DS3000: 6.50.xx.xx
DS4000: N/A DS5000: 7.6x.xx.xx
Set Storage Subsystem Learn Cycle DS3000: 7.35.xx.xx and higher DS4000: N/A
DS5000: 7.6x.xx.xx
Set Storage Subsystem Redundancy Mode DS3000: 6.17.xx.xx
DS4000: 6.1x.xx.xx DS5000: 7.3x.xx.xx
Set Storage Subsystem Security Key DS3000: 7.7x.xx.xx
DS4000: Not supported DS5000: 7.5x.xx.xx Set Storage Subsystem Time
DS3000: 6.17.xx.xx DS4000: 5.4x.xx.xx DS5000: 7.3x.xx.xx Set Unnamed Discovery Session
DS3000: 6.50.xx.xx DS4000: 7.1x.xx.xx DS5000: 7.3x.xx.xx Set VolumeCopy
DS3000: 6.17.xx.xx DS4000: 5.4x.xx.xx DS5000: 7.3x.xx.xx Show Array
DS3000: 6.17.xx.xx DS4000: 6.1x.xx.xx DS5000: 7.3x.xx.xx
Show Array Export Dependencies DS3000: 7.35.xx.xx and higher DS4000: 7.1x.xx.xx
DS5000: 7.3x.xx.xx
Show Array Import Dependencies DS3000: 7.35.xx.xx and higher DS4000: 7.1x.xx.xx
DS5000: 7.3x.xx.xx Show Controller
DS3000: 6.17.xx.xx DS4000: 5.4x.xx.xx DS5000: 7.3x.xx.xx
Note:5.43.xx.xx adds the summary parameter Show Controller NVSRAM
DS3000: 6.17.xx.xx DS4000: 6.1x.xx.xx DS5000: 7.3x.xx.xx Show Current iSCSI Sessions
DS3000: 6.50.xx.xx DS4000: Not supported DS5000: 7.6x.xx.xx
Show Drive
DS3000: 6.17.xx.xx DS4000: 5.43.xx.xx DS5000: 7.3x.xx.xx Show Drive Channel Stats
DS3000: 6.17.xx.xx DS4000: 6.1x.xx.xx DS5000: 7.3x.xx.xx Show Drive Download Progress
DS3000: 6.17.xx.xx DS4000: 6.1x.xx.xx DS5000: 7.3x.xx.xx
Show Enhanced Remote Mirroring Logical Drive Candidates DS3000: 7.7x.xx.xx
DS4000: 5.4x.xx.xx DS5000: 7.3x.xx.xx
Show Enhanced Remote Mirroring Logical Drive Synchronization Progress DS3000: 7.7x.xx.xx
DS4000: 5.4x.xx.xx DS5000: 7.3x.xx.xx Show Host Ports
DS3000: 6.17.xx.xx DS4000: 5.4x.xx.xx DS5000: 7.3x.xx.xx Show Logical Drive
DS3000: 6.17.xx.xx DS4000: 5.4x.xx.xx DS5000: 7.3x.xx.xx
Note:5.43.xx.xx adds the summary parameter Show Logical Drive Action Progress
DS3000: 6.17.xx.xx DS4000: 5.43.xx.xx DS5000: 7.3x.xx.xx
Show Logical Drive Performance Statistics DS3000: 6.17.xx.xx
DS4000: 6.1x.xx.xx DS5000: 7.3x.xx.xx
Show Logical Drive Reservations DS3000: 6.17.xx.xx
DS4000: 5.4x.xx.xx DS5000: 7.3x.xx.xx
Show Storage Subsystem DS3000: 6.17.xx.xx DS4000: 5.4x.xx.xx DS5000: 7.3x.xx.xx
Note:5.43.xx.xx adds the summary parameter. 6.14.xx.xx adds the connections parameter
Show Storage Subsystem Auto Configure DS3000: 6.17.xx.xx
DS4000: 6.1x.xx.xx DS5000: 7.3x.xx.xx
Show Storage Subsystem Host Topology DS3000: 6.17.xx.xx
DS4000: 5.2x.xx.xx DS5000: 7.3x.xx.xx
Show Storage Subsystem LUN Mappings DS3000: 6.17.xx.xx
DS4000: 6.1x.xx.xx DS5000: 7.3x.xx.xx
Show Storage Subsystem Negotiation Defaults DS3000: 6.17.xx.xx
DS4000: 7.1x.xx.xx DS5000: 7.3x.xx.xx
Show Storage Subsystem Unreadable Sectors DS3000: 6.17.xx.xx
DS4000: 6.1x.xx.xx DS5000: 7.3x.xx.xx Show String
DS3000: 6.17.xx.xx DS4000: 6.1x.xx.xx DS5000: 7.3x.xx.xx
Show Unconfigured iSCSI Initiators DS3000: 6.50.xx.xx
DS4000: Not supported DS5000: 7.6x.xx.xx Show VolumeCopy
DS3000: 6.17.xx.xx DS4000: 6.1x.xx.xx DS5000: 7.3x.xx.xx
Show VolumeCopy Source Candidates DS3000: 6.17.xx.xx
DS4000: 6.1x.xx.xx
DS5000: 7.3x.xx.xx
Show VolumeCopy Target Candidates DS3000: 6.17.xx.xx
DS4000: 6.1x.xx.xx DS5000: 7.3x.xx.xx Start Array Defragment
DS3000: 6.17.xx.xx DS4000: 7.1x.xx.xx DS5000: 7.3x.xx.xx Start Array Export
DS3000: 7.35.xx.xx and higher DS4000: 7.1x.xx.xx
DS5000: 7.3x.xx.xx Start Array Import
DS3000: 7.35.xx.xx and higher DS4000: 7.1x.xx.xx
DS5000: 7.3x.xx.xx Start Array Locate
DS3000: 6.17.xx.xx DS4000: 6.16.xx.xx DS5000: 7.3x.xx.xx
Start Drive Channel Fault Isolation Diagnostics DS3000: Not supported
DS4000: Not supported DS5000: 7.3x.xx.xx
Note:For version 7.60.xx.xx, you can change the drive parameter to accommodate the enclosures with internal disk drawers
Start Drive Channel Locate DS3000: 6.17.xx.xx DS4000: 6.1x.xx.xx DS5000: 7.3x.xx.xx Start Drive Initialize
DS3000: 6.17.xx.xx DS4000: 6.1x.xx.xx DS5000: 7.3x.xx.xx
Note:For version 7.60.xx.xx, you can change the drive parameter to accommodate the enclosures with internal disk drawers
Start Drive Locate
DS3000: 6.17.xx.xx DS4000: 6.1x.xx.xx DS5000: 7.3x.xx.xx
Note:For version 7.60.xx.xx, you can change the drive parameter to accommodate the enclosures with internal disk drawers
Start Drive Reconstruction DS3000: 6.17.xx.xx DS4000: 5.43.xx.xx DS5000: 7.3x.xx.xx
Note:For version 7.60.xx.xx, you can change the drive parameter to accommodate the enclosures with internal disk drawers
Start Enhanced Remote Mirroring Synchronization DS3000: 7.7x.xx.xx
DS4000: 6.1x.xx.xx DS5000: 7.3x.xx.xx Start iSCSI DHCP Refresh
DS3000: 6.50.xx.xx DS4000: Not supported DS5000: 7.6x.xx.xx Start Enclosure Locate
DS3000: 6.17.xx.xx DS4000: 6.1x.xx.xx DS5000: 7.3x.xx.xx Start Logical Drive Initialization
DS3000: 6.17.xx.xx DS4000: 6.1x.xx.xx DS5000: 7.3x.xx.xx Start Secure Drive Erase
DS3000: 7.7x.xx.xx DS4000: Not supported DS5000: 7.5x.xx.xx
Note:For version 7.60.xx.xx, you can change the drive parameter to accommodate the enclosures with internal disk drawers
Start Storage Subsystem Locate DS3000: 6.17.xx.xx DS4000: 6.1x.xx.xx DS5000: 7.3x.xx.xx Stop Array Locate
DS3000: 6.17.xx.xx DS4000: 6.16.xx.xx DS5000: 7.3x.xx.xx
Stop Drive Channel Fault Isolation Diagnostics DS3000: Not supported
DS4000: 7.3x.xx.xx
DS5000: 7.3x.xx.xx Stop Drive Channel Locate
DS3000: 6.17.xx.xx DS4000: 6.1x.xx.xx DS5000: 7.3x.xx.xx Stop Drive Locate
DS3000: 6.17.xx.xx DS4000: 6.1x.xx.xx DS5000: 7.3x.xx.xx Stop Enclosure Locate
DS3000: 6.17.xx.xx DS4000: 6.1x.xx.xx DS5000: 7.3x.xx.xx Stop FlashCopy
DS3000: 6.17.xx.xx DS4000: 6.1x.xx.xx DS5000: 7.3x.xx.xx Stop iSCSI Session
DS3000: 6.50.xx.xx DS4000: Not supported DS5000: 7.6x.xx.xx
Stop Storage Subsystem Drive Firmware Download DS3000: 6.17.xx.xx
DS4000: 6.1x.xx.xx DS5000: 7.3x.xx.xx Stop Storage Subsystem Locate
DS3000: 6.17.xx.xx DS4000: 6.1x.xx.xx DS5000: 7.3x.xx.xx Stop VolumeCopy
DS3000: 6.17.xx.xx DS4000: 5.4x.xx.xx DS5000: 7.3x.xx.xx Suspend Remote Mirror
DS3000: 7.7x.xx.xx DS4000: 6.1x.xx.xx DS5000: 7.3x.xx.xx