第五章 結論與後續研究
5.2 後續研究
本研究所提出的專家系統之故障檢測,經實驗結果發現有許多可以改 進的地方,後續研究方向如下:
1. 更完善的故障檢測系統
70
未來可以結合統計之方式,將各個元件進行機率的分析,並設置 參數,形成一個更完善的檢測系統
2. 遠端監看
近年來網路格外發達,可以將此系統結合網路做遠端的監控,當 任何一座電梯發生故障時,可更有效率地提供給維修人員。
3. 實際測試應用
本論文已自行製作的電梯為主軸,未來希望可以應用在實際之電 梯上測試,確認故障檢測系統的性能強健度。
4. 實際電梯應用
真實的電梯情況中,大樓樓層較多時,皆會加裝變頻器提供車廂 多種運行速度的多樣功能。而在車廂地板內也會裝設感測元件,
避免因人為站立位置不同造成類似電梯過載故障之情形發生,未 來希望將這兩者加入檢測系統中,達到控制與推論的多樣性。
71
參考文獻
[1] L. Cao, S. Zhou, and S. Yang, “Elevator Group Dynamic Dispatching System Based on Artificial Intelligent Theory,” IEEE International Conference on Intelligent Computation Technology and Automation, pp.
183-186, Oct. 2008.
[2] X. Yang, Q. Zhu, and H. Xu, “Design and Practice of an Elevator Control System Based on PLC,” IEEE Workshop on Power Electronics and Intelligent Transportation System, pp. 94-99, Aug. 2008.
[3] E. W. Kamen, M. J. Gazarik, and J. Napolitano, “A Course in Industrial Controls and Manufacturing for EE Students and Other Engineering Majors,” 1997 IEEE/ASME International Conference on American Control, pp. 3160-3165, Sept. 1997.
[4] M. Yousef Ibrahim, “Development of a Mechatronics Course at Monash University, Australia,” IEEE International Conference on Industrial Technology, pp. 1327-1332, Sept. 2002.
[5] 郭興家,機電整合概論,全華,2002 年 10 月 1 日。
[6] B. Schmulling, R. Appunn and K. Hameyer, “Electromagnetic Guiding of Vertical Transportation Vehicles: Atate Control of an Over-determined System,” IEEE International Conference on Electrical Machines, pp. 1-6, Sept. 2008.
[7] L. Cao, Z. Zhang and J. Hou, “Dynamic Optimized Dispatching System for Elevator Group Based on Artificial Intelligent Theory,” IEEE International Conference on Electronic Measurement and Instruments, pp.
884-889, 2007.
[8] J. Zhou, T .Eguchi, S. Mabu, K. Hirasawa, J. Hu and S. Markon, “A Study
72
of Applying Genetic Network Programming with Reinforcement Learning to Elevator Group Supervisory Control System,” IEEE Congress on Evolutionary Computation, pp. 3035-3041, 2006.
[9] D. B. Fogel, “An Introduction to Simulated Evolutionary Optimization,”
IEEE Trans. Neural Networks, vol.5, no.1, pp. 3-14, Jan. 1994.
[10] K. T. Eguchi, J. H. Hu and S. Markon, “Elevator Group Supervisory Control Systems using Genetic Network Programming,” IEEE Congress on Evolutionary Computation, pp. 1661-1667, 2004.
[11] K. Hirasawa, T. Eguchi, J. Zhou, L. Yu, J. Hu and S. Markon, ”A Double-Deck Elevator Group Supervisory Control System Using Genetic Network Programming,” IEEE Transactions on Systems, pp. 535-550, 2008.
[12] L. Yu, Sh. Mabu, T. T. Zhang, K. Hirasawa and T. Ueno, “A Study on Energy Consumption of Elevator Group Supervisory Control Systems using Genetic Network Programming,” IEEE International Conference on Systems, pp. 583-588. 2009.
[13] D. Zhu and C. Wu, “Fuzzy Control of Group Elevators,” IEEE Conference on Computer, Communication, Control and Power Engineering, pp. 304-307, 1993.
[14] D. Gu and D. Yan, “Study on Fuzzy Algorithm of Elevator Group Control System,” IEEE International Conference on Challenges in Environmental Science and Computer Engineering, pp. 366-369, 2010.
[15] B. K. Chang, A. S. Kyoung, H. K. Lee and O. K. Jeong “Design and Implementation of FEGCS: Fuzzy Elevator Group Control System,”
IEEE Biennial Conference of the North American Fuzzy Information
73
Processing Society, pp. 109-113, 1996.
[16] I. S. Jung, B. M. Mulman, D. Thapa, L. J. Koo, J. H. Bae, S. H. Hong, S.
Yeo, C. M. Park, S. C. Park and G. N. Wang, “PLC Contorl Logic Error Monitoring and Prediction using Neural Network,” IEEE Conference on Natural Computation, pp. 484-488, Oct. 2008.
[17] S. Zhou and S. Yang, “Elevator Group Dynamic Dispatching System Based on Artificial Intelligent Theory,” International Conference on Intelligent Computation Technology and Automation, pp. 183-186, Oct.
2008.
[18] Z. Zhang and J. Hou, “Dynamic Optimized Dispatching System for Elevator Group Based on Artificial Intelligent Theory,” International Conference on Intelligent Computation Technology and Automation, pp.
3-884 - 3-889, Jun. 2007.
[19] J. Qu and L. Liang, “Diagnostic Expert Systems from Dynamic Fault Trees,” International Conference on Reliability and Maintainability, pp.
444-450, Jan. 2004.
[20] H. Fan, Y. Yan and F. Yan, “Research of Dynamic Linked Lists for the Fault Tree Analysis Process,” IEEE International Conference on Quality, Reliability, Risk, Maintenance and Safety Engineering, pp. 93-96, 2012.
[21] B. Schmulling, R. Appunn and K. Hameyer, “Electromagnetic Guiding of Vertical Transportation Vehicles: State Control of an Over-determined System,” IEEE International Conference on Electrical Machines, pp. 1-6, 2008.
[22] 劉駿凱(民 100 年), “應用案例是推理於半導體曝光設備故障診斷輔 助系統”, 國立高雄應用科技大學電子工程研究所碩士論文。
74
[23] A. Aamodt and E. Plaza, “Case-Based Reasoning: Foundational Issues, Methodological Variations, and System Approashes,” Accepted by International Journal of computer and operations research, pp. 39-59, 2006.
[24] R. W. Blanning, “Organization Design as Expert System Design,” IEEE Proceedings of the Twenty-Fourth Annual Hawaii International Conference on System Sciences, vol.4, pp. 3-12, 1991.
[25] X. Y. Huai and F. L. Xiong, “Research on New Architecture Intelligent Systems and its System Development Environment Visual XF6.1,”
International Symposium on Intelligent Agriculture Information Technology, Beijing, P. R. China, pp. 1-4, Dec. 2000.
[26] 葉怡成,郭耀煌,專家系統方法應用與實作,全欣,民國 80 年。
[27] 張家豪,”智慧型電機接線實驗監控介面設計” 國立台灣師範大學工 業教育學系,碩士論文,民國 92 年。
[28] J. Qu and L. Liang, “A Production Rule Based Expert System for Electronic Control Automatic Transmission Fault Diagnosis,”
International Conference on Information Engineering and Computer Science, pp. 1-4, Dec. 2009.
[29] J. Qu and L. Liang, “Diagnostic Expert Systems from Dynamic Fault Trees,” International Conference on Reliability and Maintainability, pp.
444-450, Jan. 2004.
[30] E. Caillaud, D. Noyes, G. Anglerot and P. Padilla, “Integration of Expert System and Integer Programming for Optimization of Strategic Planning,”
INRIA/IEEE Symposium on Emerging Technologies and Factory Automation, vol.1, pp. 137-144, 1995.
75
[31] Q. Zhang and Y. Jiang, “The Design of Fault Diagnosis Expert System about Temperature Adjustment System Based on CLIPS,” IEEE Second International Conference on Intelligent Computation Technology and Automation, pp. 576-579, 2009.
[32] J. M. Francioni and A. Kandel, “A Software Engineering Tool for Expert System Design,” IEEE Expert, pp. 33-41, 1988.
[33] K. P. Fink, C. J. Lusth and W. J. Duran, “A General Expert System Design for Diagnostic Problem Solving,” IEEE Transactions on Pattern Analysis and Machine Intelligence, pp. 553-560, 1985.
[34] B. H. Far, “Modeling, Extraction and Reuse of Organizational Knowledge,” IEEE International Conference on Systems, Man, and Cybernetics, vol.3, pp. 2068-2073, 2000.
[35] V. J. Contreras and J. C. Ferguson, “Knowledge Management; A System for Controlling the AI Development Environment for an Expert System Which Performs Satellite Anomaly Resolution,” IEEE Military Communications Conference - Communications - Computers, pp.
11.2.1-11.2.5, 1986.
[36] G. B. Lamont and M. W. Schiller, “The Role of Artificial Intelligence in Computer-aided Design of Control Systems,” IEEE Conference on Decision and Control, pp. 1960-1965, 1987.
76
作者簡介
姓名:張玉典 籍貫:新北市
生日:民國 78 年 1 月 1 日 學歷:
1. 國立海山高級工業職業學校 2. 私立龍華科技大學電機工程學系 3. 國立臺灣師範大學工業教育學系
發表文章:
1. 曾煥雯、林永翔、張玉典(民國 101 年)。植基於雷射指示器之車輛巡邊 及防撞偵測,中華民國系統科學與工程研討會,頁 993-997。
2. 曾煥雯、張玉典、蕭文弘(民國 101 年)。植基於雷射指示器之迷宮路口 辨識及車子導引,中華民國系統科學與工程研討會,頁 998-1001