參考文獻
1. 楊智超, “輕量化新鎂合金材料之發展”, 工業材料雜誌, 198 期, 2003, pp. 81-85.
2. 林哲毅, “ZA85 鎂合金經等通道轉角擠型後顯微組織與機械性質改善之研究”, 2009, pp. 4.
3. Y. Chino, L. J. Seol, Y. Nakaura, K. Ohori and M. Mabuchi, “Mechanical properties of Mg-Al-Ca alloy recycled by solid-state recycling”, Materials Transactions, 46, 2005, pp. 2592-2595.
4. T. Hommaa, S. Nakawaki, K. Oh-ishi, K. Hono and S. Kamado, “Unexpected influence of Mn addition on the creep properties of a cast Mg-2Al-2Ca (mass%) alloy”, Acta Materialia, 59, 2011, pp. 7662-7672.
5. W. M. Gana, K. Wua, M. Y. Zhenga, X. J. Wanga, H. Changa and H.-G.
Brokmeier, “Microstructure and mechanical property of the ECAPed Mg2Si/Mg composite”, Materials Science and Engineering A, 516, 2009, pp. 283-289.
6. P. Zhang, “Creep Behavior of the Die-Cast Mg-Al Alloy AS21”, Scripta Materialia, 52, 2005, pp. 277-282.
7. B. Bronfin, M. Katsir and E. Aghion, “Preparation and Solidification Feature of AS21 Magnesium Alloy”, Materials Science and Engineering A, 302, 2001, pp.
46-50.
8. C. C. Jainand C. H. Koo, “Creep and Corrosion Properties of the Extruded Magnesium Alloy Containing Rare Earth”,Materials Transactions, 48, 2007, pp.
265 -272.
9. I. P. Moreno, T. K. Nandy, J. W. Jones, J. E. Allison and T. M. Pollock,
“Microstructural Stability and Creep of Rare-Earth Containing Magnesium Alloys”, Scripta Materialia, 48, 2003, pp. 1029-1034.
10. K. Asla, A. Tari and F. Khomamizadeh, “The effect of different content of Al, RE and Si element on the microstructure, mechanical and creep properties of Mg-Al alloys”, Materials Science and Engineering A, 523, 2009, pp. 1-6.
11. W. Blum, P. Zhang, B. Watzinger, B. v. Grossmann and H.G. Haldenwanger,
“Comparative study of creep of the die-cast Mg-alloys AZ91, AS21, AS41, AM60 and AE42”, Materials Science and Engineering A, 319, 2001, pp. 735-740.
12. 陳振華, “變形鎂合金”, 化學工業出版社, 2005, pp. 102-103.
13. Z. Zhang, A. Couture and A. Luo, “An Investigation of the Properties of Mg-Zn-Al Alloys”, Scripta Materialia, 39, 1998, pp. 45-53.
14. Z. Zhang, R. Tremblay, D. Dubé and A. Couture, “Solidification Microstructure of ZA102, ZA104 AND ZA106 magnesium alloys and its effect on creep deformation”, Canadian Metallurgical Quarterly, 39, 2000, pp. 503-512.
15. S. Harosh, L. Miller, G. Levi and M. Bamberger, “Microstructure and properties of Mg-5.6wt%Sn-4.4wt%Zn-2.1wt%Al alloy”, J. Mater. Sci., 42, 2007, pp.
9983-9989.
16. Z. Zeng, R. Tremblay and D. Dube, “Microstructure and Mechanical Properties of ZA104(0.3-0.6Ca) Die-Casting Magnesium Alloys”, Materials Science and Engineering A, 385, 2004, pp. 286-291.
17. W. Xiaofenga, S. Yangshan, X. Fenga, B. Jing and T. Weijian, “Effects of Sr and Ca on the microstructure and properties of Mg-12Zn-4Al-0.3Mn alloy”, Materials Science and Engineering A, 508, 2009, pp. 50-58.
18. A. A. Luo, “Recent Magnesium Alloy Development for automotive Powertrain Application”, Materials Science Forum, 419-422, 2003, pp. 57-66.
19. 黃秀棓, “等通道彎角擠製(ECAE)對鎂合金之影響”, 國立中央大學機械工程 研究所, 2003, pp. 63-65.
20. V. M. Segal, V. I. Reznikov, A. E. Drobyshevskiy and V. I. Kopylov, “Russian Metallurgy”, Engl. Transl., 1, 1981, pp.115.
21. V. M. Segal, “Materials Processing by simple Shear”, Materials Science and Engineering A, 197, 1995, pp. 157-164.
22. V. M. Segal, “Engineering and Commercialization of Equal Channel Angular Extrusion (ECAE)”, Materials Science and Engineering A, 386, 2004, pp.
269-276.
23. Y. Iwahashi, Z. Horita, M. Nemoto and T. G. Langdon, “The Process of Grain Refinement in Equal Channel Angular Pressing”, Acta Materialia, 9, 1998, pp.
3317-3331.
24. L. B. Tong, M. Y. Zhenga, X. S. Hu, K. Wu, S. W. Xu, S. Kamado and Y. Kojima
“Influence of ECAP routes on microstructure and mechanical properties of Mg-Zn-Ca alloy”, Materials Science and Engineering A, 527, 2010, pp.
4250-4256.
25. Y. Y. Wang, P. L. Sun, P. W. Kao and C. P. Chang, “Effect of Deformation Temperature on the Microstruture Developed in Commercial Purity Aluminum Processed by Equal Channel Angular Extrusion”, Scripta Materialia, 50, 2004, pp.
613-617.
26. K. Mathis, J. Gubicza and N. H. Nam, “Microstructure and Mechanical Behavior of AZ91 Mg Alloy Processed by Equal Channel Angular Pressing”, Journal of Alloys and Compounds, 394, 2005, pp. 194-199.
27. F. Kang, J. T. Wang and Y, Peng, “Deformation and Fracture during Equal Channel Angular Pressing of AZ31 Magnesium Alloy”, Materials Science and Engineering A, 487, 2008, pp. 68-73.
28. K. Mastubara, Y. Miyahara, Z. Horita and T. G. Langdon, “Achieving Enhanced Ductility in a Dilute Magnesium Alloy through Severe Plastic Deformation”, Metall. Mater. Trans., 35, 2004, pp. 1735-1744.
29. K. Mastubara, Y. Miyahara, Z. Horita and T. G. Langdon, “Developing
Superplasticity in a Magnesium Alloy through a Combination of Extrusion and ECAP”, Acta Materialia, 52, 2003, pp. 3073-3084.
30. K. Yan, Y. S. Sun, J. Bai and F. Xue, “Microstructure and mechanical properties of ZA62 Mg alloy by equal-channel angular pressing”, Materials Science and
Engineering A, 528, 2011, pp. 1149-1153.
31. M. Furekawa, Y. Iwahashi, Z. Hortia, M. Nemoto and T. G. Langdon, “The Shearing Characteristics associated with Equal Channel Angular Pressing”, Materials Science and Engineering A, 257, 1988, pp. 328-332.
32. C. Pithan, T. Hashimoto, M. Kawazoe, J. Nagahora and K. Higashi,
“Microstructure and Texture Evolution in ECAP Processed A5056”, Materials Science and Engineering A, 280, 2000, pp. 62-68.
33. O. F. Higuera-Cobos, J. M. Cabrera, “Mechanical, microstructural and electrical evolution of commercially pure copper processed by equal channel angular extrusion”, Materials Science & Engineering A, 571, 2013, pp. 103–114.
34. 王建義, “鎂合金板材之擠型技術”, 工業材料雜誌, 170 期, 2001, pp. 134.
35. R. B. Figueiredo and T. G. Langdon, “Principles of grain refinement in
magnesium alloys processed by equal-channel angular pressing”, J. Mater. Sci., 44, 2009, pp. 4758-4762.
36. M. Cai, D. P. Field and G. W. Lorimer, “A systematic comparison of static and dynamic ageing of two Al-Mg-Si alloys”, Materials Science and Engineering A, 373, 2004, pp. 65-71.
37. S. Tardif, R. Tremblay and D. Dube, “Influence of cerium on the microstructure and mechanical properties of ZA104 and ZA104 + 0.3Ca magnesium alloys”, Materials Science and Engineering A, 527, 2010, pp. 7519-7529.
38. N. Balasubramani, U. T. S. Pillai and B. C. Pai, “Optimization of heat treatment parameters in ZA84 magnesium alloy”, Journal of Alloys and Compounds, 457, 2008, pp. 118-123.
39. ASM,“Metallography, Structure and Phase Diagram” Metals Handbook, 8 th Edition, 8, pp. 316.
40. S. W. Xu, N. Matsumoto, S. Kamado, T. Honma and Y. Kojima, “Dynamic microstructural changes in Mg-9Al-1Zn alloy during hot compression”, Scripta Materialia, 61, 2009, pp. 249-252.
41. C. Y. Lin, H. J. Tsai, C. G. Chao and T. F. Liu, “Effects of equal channel angular extrusion on the microstructure and high-temperature mechanical properties of ZA85 magnesium alloy”, Journal of Alloys and Compounds, 530, 2012, pp.48-55.
42. K. Yan, Y. S. Sun, J. Bai and F. Xue, “Microstructure and mechanical properties of ZA62 Mg alloy by equal-channel angular pressing”, Materials Science and Engineering A, 528, 2011, pp.1149-1153.
43. J. Zhang, Y. Dou, B. Zhang and X. Luo, “Elevated-temperature plasticity and mechanical properties of a rare earth-modified Mg–Zn–Al alloy”, Materials Letters, 65, 2011, pp. 944–947.
44. F. Pan, M. Yang, L. Cheng, “Effects of minor scandium on as-cast microstructure, mechanical properties and casting fluidity of ZA84 magnesium alloy”, Materials Science and Engineering A, 527, 2010, pp.1074–1081.