在 DBR 架構下，瓶頸機台是依計劃(Drum)來派工，因此機台派工的 設計主要是針對不同特性的非瓶頸機台。而非瓶頸機台的類型又分為多 機台與併量機台（如真空回火站等）兩類，故必須對這兩種機台類型分 別做設計，且需再考量各工作站之特性（如等候時間限制等）予以各別 修正，如此才能使非瓶頸站滿足全力配合瓶頸站之需求。
三、緩衝管理(Buffer Management)
在產品進度控制方面，必須依組立廠之特性發展出一套適合廠內需 求的緩衝管理模式，以保護產品能及時到達瓶頸站前以避免瓶頸機台閒 置而造成產能的浪費，以及確保產品能準時出貨。
未來若能將上述三點納入研究，則可建構出一套完整的 DBR 管理系統，
將能真正滿足該產業應用之所需。
參考文獻
1. 李俊昇(2003)，「液晶面板組裝廠批量製程派工法則之設計」，交通大學 工業工程與管理研究所碩士論文。
2. 李娟如(2001)，「TFTLCD 面板構造、顯示原理及面板製程介紹」，中華 映管公司。
3. 林則孟、黃建中、陳子立、陳盈彥(2003)，「TFT-LCD 多廠區生產鏈之生 產規劃架構」，2003 產業電子化運籌管理學術暨實務研討會，逢甲大學：
台中。
4. 林毓淳(2004)，「薄膜液晶顯示器組立廠主生產排程快速規劃系統之設 計」，交通大學工業工程與管理研究所碩士論文。
5. 許家豪(2004)，「2005 年 TFT 產業趨勢與展望」，巨亨網月報，2004 年 11 月 25 日。
6. 彭俊昌(2005)，「液晶面板組立廠投料與派工模擬分析」，清華大學工業 工程與工程管理研究所碩士論文。
7. 蔡秉宏(2003)，「液晶面板組裝廠產能配置模組之建構」，交通大學工業 工程與管理研究所碩士論文。
8. 潘志聖、徐潤忠與許家禔，「成功案例分享」，TOC 訂單履約管理機制整 體解決方案研討會，2004 年 5 月 27 日，煙波飯店：新竹。
9. Atwater, J.B. and Chakravorty, S.S. (2002), “A Study of the Utilization of Capacity Constrained Resources in Drum-Buffer-Rope Systems,” Production and Operations Management, Vol. 11, No. 2, pp. 259-273.
10. Azizoglu, M. and Kirca, O. (1998), “Tardiness Minimization on Parallel Machines” International Journal of Production Economics, Vol. 55, pp.
163-168.
11. Alidaee, B. and Rosa, D. (1997), “Scheduling Parallel Machines to Minimize Total Weighted and Unweighted Tardiness,” Computers and Operations Research, Vol. 24, No. 8, pp. 775-788.
12. Corbett, T. and Csillag, J.M. (2001), “Analysis of the Effects of Seven Drum-Buffer-Rope Implementations,” Production and Inventory Management Journal, Third/Fourth Quarter, pp. 17-23.
13. Cheng, T.C.E. and Diamond, J.E. (1995), “Scheduling Two Job Classes on Parallel Machines,” IIE Transactions, Vol. 27, pp. 689-693.
14. Daniel, V. and Guide, R., Jr., (1997), “Scheduling with Priority Dispatching Rules and Drum-Buffer-Rope in a Recoverable Manufacturing System,”
International Journal of Production Economics,Vol. 53, No. 1, pp. 101-116.
15. Daniel, V. and Guide, R., Jr., (1996), “Scheduling Using Drum-Buffer-Rope
in a Remanufacturing Environment,” International Journal of Production Research, Vol. 34, No. 4, pp. 1081-1091.
16. Eduardo, D.S. and Malave, C.O. (2004), “Simulated Annealing for Parallel Machine Scheduling with Split Jobs and Sequence-Dependent Set-Ups,”
International Journal of Industrial Engineering, Vol. 11, No. 1, pp. 43-53.
17. Goldratt, E.M. (1986), The Goal, 2nd revised edition, Croton-on-Hudson, New York: North River Press.
18. Goldratt, E.M. (1990), The Race, Croton-on-Hudson, New York: North River Press.
19. Goldratt, E.M. (1990), The Haystack Syndrome, Croton-on-Hudson, New York: North River Press.
20. Goldratt, E. M. and Fox, R. E. (1986), The Race, Croton-on-Hudson, New York: North River Press.
21. Kim, Y.D., S.O. Shim, S.B. Kim, and Choi, Y.C. (2004), “Parallel Machine Scheduling Considering a Job-Splitting Property,” International Journal of Production Research, Vol. 42, No. 21, pp. 4531-4546.
22. Ronen, B. and Starr, M.K. (1990), “Synchronous Manufacturing as in OPT：
from Practice to Theory,” Computers and Industrial Engineering, Vol. 18, No.
4, pp. 585-600.
23. Suer, G. A., F. Pico and Santiago, A. (1997), “Identical Machine Scheduling to Minimize the Number of Tardy Jobs When Lot-splitting is Allowed,”
Computers and Industrial Engineering, Vol. 33, No. 1-2, pp. 277-280.
24. Shoemaker, L.J. (1995), “It’s a Jungle Out There-So Listen to the DRUM Beat!,” 1995 APICS Constraints Management Symposium and Technical Exhibit, April 26-28, Phoenix, AZ, USA, pp. 119-139.
25. Schragenheim, E. and Ronen, B. (1990), “Drum-Buffer-Rope Shop Floor Control,” Production and Inventory Management Journal, Third Quarter, pp.
18-23.
26. Serifoglu, F.S. and Ulusoy, G. (1999), “Parallel Machine Scheduling with Earliness and Tardiness Penalties,” Computers and Operations Research, Vol.
26, No. 8, pp. 773-787.
27. Sarin, S.C., S. Ahn, and Bishop, A.B. (1988), “An Improved Branching Sheme for the Branch Bound Procedure of Scheduling n Jobs on m Parallel Machines to Minimize Total Weighted Flowtime,” International Journal of Production Research, Vol. 26, No. 7, pp. 1183-1191.
28. Tahar, D.N., F. Yalaoui, C. Chu, and Amodeo, L. (2006), “A Linear Programming Approach for Identical Parallel Machine Scheduling with Job