結論

14.6%。200℃的最大抗拉強度由 105MPa 增加至 249MPa；降伏強度由 74MPa 增加至 162MPa，提升幅度分別為 137%以及 119%；伸長率由 5.1%增加至 28.5%。

參考文獻

1. 賴耿陽, “非鐵金屬材料”, 1990.

2. H. P. Godard, W. B. Jepson, M. R. Bothwell, R. L. Kane, “The Corrosion of Light Metals”, 1967.

3. B. L. Mordike, T. Ebert, “Magnesium Properties Applications Potential”, Materials Science and Engineering, A302, 2001, pp. 37-45.

4. 張榮桂, “利用往覆式擠型法製作超塑性 AZ91 鎂合金之研究”, 國立清 華大學材料科學工程研究所碩士論文, 2000.

5. 蔡幸甫, “筆記型電腦運用鎂合金的幾個重大理由”, 工業材料, 154 期, pp. 116-120.

6. 楊智超, “鎂合金材料特性及新製程發展”, 工業材料, 152 期, pp. 72-80.

7. P. Zhang, “Creep Behavior of the Die-Cast Mg-Al Alloy AS21”, Scripta Materialia, 52, 2005, pp. 277-282.

8. E. Evangelista, E. Gariboldi, O. Lohne, S. Spigarelli, “High-Temperature Behavior of As Die-Cast and Heat Treated Mg-Al-Si AS21X Magnesium Alloy”, Materials Science and Engineering, A387-389, 2004, pp. 41-45.

9. B. Bronfin, M. Katsir, E. Aghion, “Preparation and Solidification Feature of AS21 Magnesium Alloy”, Materials Science and Engineering, A302, 2001, pp. 46-50.

10. I.P. Moreno, T.K. Nandy, J.W. Jones, J.E. Allison, T.M. Pollock,

“Microstructural Stability and Creep of Rare-Earth Containing Magnesium Alloys”, Scripta Materialia, 48, 2003, pp. 1029-1034.

11. G. Pettersen, H. Westengen, R. Hoier, O. Lohne, “Microstructure of a

Pressure Die Cast Magnesium-4wt.% Aluminum Alloy Modified with Rare Earth Additions”, Materials Science and Engineering, A207, 1996, pp.

115-120.

12. W. Blum, P. Zhang, B. Watzinger, B.V. Grossmann, H.G. Haldenwanger,

“Comparative Study of the Creep of the Die-Cast Mg-Alloys AZ91, AS21, AS41, AM60 and AE42”, Materials Science and Engineering, A319-321, 2001, pp. 735-740.

13. 唐乃光, “壓鑄高溫鎂合金之發展”, 工業材料雜誌, 218 期, 2005, pp.

163-173.

14. Z. Zhang, R. Tremblay, D. Dube, “Microstructure and Mechanical Properties of ZA104(0.3-0.6Ca) Die-Casting Magnesium Alloys”, Materials Science and Engineering, A385, 2004, pp. 286-291.

15. A. A. Luo, “Recent Magnesium Alloy Development for Automotive Powertrain Application”, Materials Science Forum, 419-422, 2003, pp.57-66.

16. Z. Zhang, A. Couture, A. Luo, “An Investigation of the Properties of Mg-Zn-Al Alloys”, Scripta Materialia, Vol. 39, No.1, 1998, pp. 45-53.

17. 黃秀棓, “等通道彎角擠製(ECAE)對鎂合金之影響”, 國立中央大學機械 工程研究所, 2003.

18. B. Jing, S. Yangshan, X. Shan, X. Feng, Z. Tianbai, “Microstructure and Tensile Creep Behavior of Mg-4Al Based Magnesium Alloys with Alkaline-Earth Elements Sr and Ca Additions”, Materials Science and Engineering, A419, 2006, pp. 181-188.

19. K. Hirai, H. Somekawa, Y. Takigawa, K. Higashi, “Effects of Ca and Sr Addition on Mechanical Properties of a Cast AZ91 Magnesium Alloy at Room and Elevated Temperature”, Materials Science and Engineering,

A403, 2005, pp. 276-280.

20. R. Ninomiya, T. Ojiro, K. Kubota, “Improved Heat Resistance of Mg-Al Alloy by the Ca Addition”, Acta metall. mater., 43, 1995, pp. 669-674.

21. I. Anyanwu, Y. Gokan, A. Suzuki, S. Kamado, Y. Kojima, S. Takeda, T.

Ishida, “Effect of Substituting Cerium-Rich Mischmetal with Lanthanum on High Temperature Properties of Die-Cast Mg-Zn-Al-Ca-Re Alloys”

Materials Science and Engineering, A380, 2004, pp. 93-99.

22. V. M. Segal, “Materials Processing by Simple Shear”, Materials Science and Engineering, A197, 1995, pp. 157-164.

23. V. M. Segal, K.T. Hartwig, R. E. Goforth, “In Situ Composites Processed by Simple Shear”, Materials Science and Engineering, A224, 1997, pp.

107-115.

24. Y. Iwahashi, J. Wang, Z. Horita, M. Nemoto, T. G. Langdon, “Principle of Equal Channel Angular Pressing for the Processing of Ultra-Fine Grained Materials”, Scripta Materialia, 1996, 35, pp. 143-146.

25. Y. Iwahashi, Z. Horita, M. Nemoto, T. G. Langdon, “An Investigation of Microstructural Evolution During Equal Channel Angular Pressing”, Acta.

Mater., 11, 1997, pp. 4733-4741.

26. V. M. Segal, “Engineering and Commercialization of Equal Channel Angular Extrusion (ECAE)”, Materials Science and Engineering, A386, 2004, pp. 269-276.

27. Y. Iwahashi, Z. Horita, M. Nemoto, T. G. Langdon, “The Process of Grain Refinement in Equal Channel Angular Pressing”, Acta. Mater., 9, 1998, pp.3317-3331.

28. A. Yamashita, D. Yamaguchi, Z. Horita, T. G. Langdon, “Influence of Pressing Temperature on Microstructural Development in Equal Channel

Angular Pressing”, Materials Science and Engineering, A287, 2001, pp.

100-106.

29. Y. Y. Wang, P. L. Sun, P. W. Kao, C. P. Chang, “Effect of Deformation Temperature on the Microstructure Developed in Commercial Purity Aluminum Processed by Equal Channel Angular Extrusion”, Scripta Materialia, 2004, 50, pp. 613-617.

30. K. Mathis, J. Gubicza, N. H. Nam, “Microstructure and Mechanical Behavior of AZ91 Mg Alloy Processed by Equal Channel Angular Pressing”, Journal of Alloys and Compounds, 394, 2005, pp. 194-199.

31. W. J. Kim, S. I. Hong, Y. S. Kim, S. H. Min, H. T. Jeong, J. D. Lee,

“Texture Development and its Effect on Mechanical Properties of an AZ61 Mg Alloy Fabricated by Equal Channel Angular Pressing”, Acta Mater. 51, 2003, pp. 3293-3307.

32. S. R. Agnew, J. A. Horton, T. M. Lillo, D. W. Brown, “Enhanced Ductility in Strongly Textured Magnesium Produced by Equal Channel Angular Processing”, Scripta Materialia, 2004, 50, pp. 377.

33. K. Xia, J. T. Wang, X. Wu, G. Chen, M. Gurvan, “Equal Channel Angular Pressing of Magnesium Alloy AZ31”, Materials Science and Engineering, A410-411, 2005, pp.324-327.

34. S. L. Semiatin, V. M. Segal, R. E. Goforth, N. D. Frey, D. P. Delo,

“Workability of commercial-purity titanium and 4340 steel during equal channel angular extrusion at cold-working temperatures”, Metall. Mater.

Trans., 30A, 1999, pp. 1425-1435.

35. V. M. Segal, “Equal channel angular extrusion: from macromechanics to structure formation”, Materials Science and Engineering, A271, 1999, pp.

322-333.

36. F. Kang, J. T. Wang, Y. Peng, “Deformation and Fracture during Equal Channel Angular Pressing of AZ31 Magnesium Alloy”, Materials Science and Engineering, A487, 2008, pp. 68-73.

37. K. Matsubara, Y. Miyahara, Z. Horita, T. G. Langdon, “Achieving Enhanced

Ductility in a Dilute Magnesium Alloy through Severe Plastic Deformation”,

38. K. Matsubara, Y. Miyahara, Z. Horita, T. G. Langdon, “Developing Superplasticity in a Magnesium Alloy through a Combination of Extrusion and ECAP”, Acta Mater. 51, 2003, pp. 3073-3084.

39. M. Furekawa, Y. Iwahashi, Z. Horita, M. Nemoto, T. G. Langdon, “The Shearing Characteristics associated with Equal Channel Angular Pressing”, Materials Science and Engineering, A257, 1998, pp. 328-332.

40. C. Pithan, T. Hashimoto, M. Kawazoe, J. Nagahora, K. Higashi,

“Microstructure and Texture Evolution in ECAE Processed A5056”, Materials Science and Engineering, A280, 2000, pp. 62-68.

41. 黃文賢, “純銅經等徑轉角擠型加工後微觀組織之變化”, 國立中山大學 材料科學研究所博士論文, 2000.

42. 王建義, “鎂合金板材之壓型技術”, 工業材料雜誌, 170 期, 134.

43. T. Sakai, J. J. Jonas,“Dynamic recrystallization: Mechanical microstructural consideration”, Acta Mater. 32, 1984, pp. 189-209.

44. M. Janecek, M. Popov, M. G. Krieger, R. J. Hellmig, Y. Estrin, “Mechanical Properties and Microstructure of a Mg Alloy AZ31 Prepared by Equal Channel Angular Pressing”, Materials Science and Engineering, A462, 2007, pp. 116-120.

45. M. F. Lee, “Development of Submicrometer Grained Materials by ECAE”, Master thesis, in Materials Science and Engineering, National Sun Yat-Sen

University, Kaohsiung, 35, 1997.

46. Y. Wu, I. Baker, “An Experimental Study of Equal Channel Angular Extrusion”, Scripta Materialia, 37, 1997, pp. 137-142.

47. K. Nakashima, Z. Horita, M. Nemoto, T. G. Langdon, “Influence of Channel Angle on the Development of Ultrafine Grains in Equal Channel Angular Pressing”, Acta Mater. 5, 1998, pp. 1589-1599.

48. 孫佩鈴, “純鋁經大量塑性變形生成細晶粒之研究”, 國立中山大學材料 科學研究所碩士論文, 1999.

49. Robert E. Reed-Hill, “Physical Metallurgy Principles”, 3^rd ed., pp. 192.

50. Z. Zuberova, Y. Estrin, T. T. Lamark, M. Janecek, R. J. Hellmig, M. Krieger,

“Effect of Equal Channel Angular Pressing on the Deformation Behaviour of Magnesium Alloy AZ31 under Uniaxial Compression”, Journal of Materials Processing Technology, 184, 2007, pp. 294-299.

51. K. Xia, J. T. Wang, X. Wu, G. Chen, M. Gurvan, “Equal Channel Angular Pressing of Magnesium Alloy AZ31”, Materials Science and Engineering, A410-411, 2005, pp. 324-327.

52. K. Mathis, J. Gubicza, N. H. Nam, “Microstructure and Mechanical Behavior of AZ91 Mg Alloy Processed by Equal Channel Angular Pressing”, Journal of Alloys and Compounds, 394, 2005, pp. 194-199.

53. 陳振華, “耐熱鎂合金”, 化學工業出版社, pp.182.