5.2.1 Output module specifications
Max. Load Current Output Response Time Model Output Type
No. of Points/
Module
Rated Load Voltage
Per Point Per
Contact output (All points independent)
16A/all points
AY11 Contact output 8A
AY11A
240VAC 24VDC
AY11AEU
Contact output (All points independent)
24VDC 24VAC
16A/all points
AY11E 240VAC
24VAC AY11EEU
16 points
AY13EEU 24VDC
24VAC AY13E
32 points
240VAC 24VAC
5A
AY15EU
Contact output
24 points 24VDC 240VAC
2A
Triac output
32 points
AY40 Transistor output
(sink type) 0.1A 0.8A
AY40A
Transistor output (all points
independent sink type) (resistive load)
External Power Supply (TYP 24VDC) External
Connections
Common Terminal Arrangement
Surge Suppression
Fuse Rating
Error Display
Current
Internal Current Consumption
Number of Occupied I/O Points
20 terminal block connector
8 points/
common 38 terminal
block connector
No common (all points independent)
None
20 terminal block connector
8 points/
common 38 terminal
block connector
No common (all points independent)
None
20 terminal block connector
Varistor
8A
common
None
None
None
0.22A 0.15A
32 points 38 terminal
block connector
4 points/
common CR absorber 3.2A 0.40A
20 terminal block connector
CR absorber
varistor 7A *6
Display
*10 0.305A
16 points
38 terminal block connector
Absorber 3.2A *6
⎯
0.59A 32 points
20 terminal block connector
8 points/
common
Clamp diode 0.008A 0.115A
38 terminal block connector
No common (all points independent)
Surge absorbing diode
⎯ 0.19A
20 terminal block connector
8 points/
common Cramp diode
None
None
0.015A 0.115A
16 points
(To next page)
(From front page)
Max. Load Current Output Response Time Model Output Type
No. of Points/
Module
Rated Load Voltage
Per Point Per AY41 1.6A
AY41P 32 points (resistive load)
AY42-S1
12/24VDC
0.1ms or less
0.3ms or less (resistive load)
AY42-S3
*1 0.1A *5 2A
AY42-S4
*1 AY51-S1
32 points
12/24VDC
0.3A 2A AY60
Transistor output (sink type)
2A 5A
AY60E
24VDC (12/48V) *2
12/24 (resistive load)
12VDC
2A 9.6A
AY60EP
Transistor output (source type)
12/24VDC
24VDC
AY60S Transistor output (sink type)
16 points
24/48VDC
(12V) *3 2A 6.4A 1ms or
less
3ms or less (resistive load)
AY70 16 points 0.016A 0.128A
AY71
Transistor output (for TTL. COMOS) (sink type)
32 points
5/12VDC
0.016A 0.256A
1ms or less
1ms or less
External Power Supply (TYP 24VDC) External
Connections
Common Terminal Arrangement
Surge Suppression
Fuse Rating
Error Display
Current
Internal Current Consumption
Number of Occupied I/O Points
0.02A 38 terminal
block connector
16 points/ Cramp diode
1.6A *7 Display
*11
0.04A
0.29A 40-pin
connector × 2
32 points/
common
Photo coupler Built-in Zener diode
None None ⎯ 0.5A
64 points
20 terminal block connector
8 points/
common 2A *6 Display
*10 0.065A 0.115A 16 points Varistor
None None 0.05A 0.023A 38 terminal
block connector
16 points/
common Transistor Built-in Zener diode
1A *8 Display
*10 0.1A 0.31A
32 points
Varistor 3.2A *9 0.065A
5A *9 Display
0.065A Surge
absorbing diode
None 0.11A 0.115A
Varistor 5A *9 0.003A 0.075A
16 points 20 terminal
block connector
8 points/
common
*12
0.055A 0.1A 16 points
38 terminal block connector
16 points/
common
None None
None
*12
0.1A 0.2A 32 points
(To next page)
(From front page)
Max. Load Current Output Response Time Model Output Type
No. of Points/
Module
Rated Load Voltage
Per Point Per Common
OFF to ON
ON to OFF AY72 *1
Transistor output (for TTL. COMOS) (sink type)
64 points 5/12VDC 0.016A 0.512A 1ms or less
1ms or less
AY80 0.5A 2A 2mc of
less
2ms of less (resistive load) AY80EP
16 points
0.8A 3.84A 0.5ms or less
1.5ms or less
AY81 0.5A 4A 2ms of
less
2ms of less (resistive load) 12VDC
0.8A 7.68A AY81EP
32 points
24VDC
0.4A 3.84A 12VDC
0.1A 1.92A
*1 AY82EP
Transistor output (source type)
64 points
12/24VDC
24VDC
0.04A 0.758A
0.5ms or less
1.5ms or less
External Power Supply (TYP 24VDC) External
Connections
Common Terminal Arrangement
Surge Suppression
Fuse Rating
Error Display
Current
Internal Current Consumption
Number of Occupied I/O Points
40-pin connector
× 2
32 points/
common None None None *12
0.3A 0.3A 64 points
Varistor 2A *6 Display
*10 0.06A 20 terminal
block connector
8 points/
common
Surge absorbing diode
0.11A
0.115A 16 points
Varistor 0.05A 38 terminal
block connector
16 points/
common
0.22A
0.23A 32 points
40-pin connector
× 2
32 points/
common
Surge absorbing diode
None None
0.05A 0.29A 64 points
The following specifications apply to all modules:
Isolation method : Photocoupler Input indication : LEDs
*1 : The ON/OFF status of the first or latter half is indicated by the LEDs in accordance with the setting of the selector switch on the front panel of the module:
FH setting: First half (Y00 to Y1F), LH setting: Latter half (Y20 to Y3F)
*2 : When 12/48 VDC is used as the load power supply, a separate 24 VDC power supply must be used as an external power supply.
*3 : When 12 VDC is used as the load power supply, a separate 24/48 VDC power supply must be used as an external power supply.
*4 : When the module is installed adjacent to the power supply module, the value indicated in parentheses applies.
*5 : The maximum load current differs depending on the number of simultaneously ON points.
*6 : Fast-melting fuse (one per common)
*7 : Normal fuse (two per common)
*8 : Fast-melting fuse (two per 8-per-common unit)
*9 : Fast-melting fuse (two per common)
*10 : LED comes on when a fuse blows or the external power supply is turned off.
*11 : Since this is a built-in fuse directly fixed to the module, replace the entire module if it blows.
*12 : TYP. 12 VDC
5.2.2 Output module connections
Model Rated Input Voltage Model Rated Input Voltage
AY10 AY10A
AY11 AY11A
AY11E
(2)
AY11AEU
24 VDC/240 VAC (1)
AY11EEU
24 VDC/240 VAC
100/200 VAC
100/200 VAC 24 VDC
Y00 Y00
Vacant Vacant
0V + −
Model Rated Input Voltage Model Rated Input Voltage
AY13 (4)
AY15EU 24VDC/240 VAC AY13E (3)
AY13EU
12 VDC/240 VAC
Y01 Y00
L L
Y1E Y1D COM4 Y1F
0V 100/200 VAC
100/200 VAC 100/200 VAC
100/200 VAC + −
Y01 Y00
L
Model Rated Input Voltage Model Rated Input Voltage
100/200 VAC
100/200 VAC
Vacant Vacant
Model Rated Input Voltage Model Rated Input Voltage
(7) AY23 100/240 VAC AY40
Y01 Y00
L L
Y1E Y1D COM4 Y1F
L
100/200 VAC
100/200 VAC 100/200 VAC
100/200 VAC Vacant
Vacant
12/24 VDC 12/24 VDC
+
−
+
−
Model Rated Input Voltage Model Rated Input Voltage
(9) AY40A 12/24 VDC (10) AY41
AY41P 12/24 VDC
12/24 VDC
Y01
Y1F Y1E L
12/24 VDC
12/24 VDC
12/24 VDC
12/24 VDC + −
+ −
Model Rated Input Voltage Model Rated Input Voltage
AY42 (12)
Y00 Y10
Y01 Y11
Y02 Y12
Y03 Y13
Y04 Y14
Y05 Y15
Y06 Y16
Y07 Y17
Y08 Y18
Y09 Y19
Y0A Y1A
Y0B Y1B
Y0C Y1C
Y0D Y1D
Y0E Y1E
Y0F Y1F
Vacant Vacant
Vacant Vacant
12/24 VDC 0V
12/24 VDC 0V − +
* The figure above indicates F (the first half 32 points).
The connections for L (the latter half 32 points) are the same as for F (regard Y00 to Y1F as Y20 to Y3F).
B1 and B2 , and A1 and A2 are connected internally.
L
Y00 Y10
Y01 Y11
Y02 Y12
Y03 Y13
Y04 Y14
Y05 Y15
Y06 Y16
Y07 Y17
Y08 Y18
Y09 Y19
Y0A Y1A
Y0B Y1B
Y0C Y1C
Y0D Y1D
Y0E Y1E
Y0F Y1F
Vacant Vacant
Vacant Vacant
5/12/24 VDC 0V
5/12/24 VDC 0V − +
Model Rated Input Voltage Model Rated Input Voltage
Y00 Y10
Y01 Y11
Y02 Y12
Y03 Y13
Y04 Y14
Y05 Y15
Y06 Y16
Y07 Y17
Y08 Y18
Y09 Y19
Y0A Y1A
Y0B Y1B
Y0C Y1C
Y0D Y1D
Y0E Y1E
Y0F Y1F
Vacant Vacant
Vacant Vacant
COM1 COM1 Vacant
Vacant −+
* The figure above indicates F (the first half 32 points).
The connections for L (the latter half 32 points) are the same as for F (regard Y00 to Y1F as Y20 to Y3F).
Regard COM1 as COM2.
B1 and B2 , and A1 and A2 are connected internally.
3
Y1F Y1E
L
12/24 VDC
12/24 VDC
12/24 VDC
12/24 VDC
+ −
+ −
Model Rated Input Voltage Model Rated Input Voltage (15)
12/48 VDC
When load voltage is 12/48 VDC
+ −
+
−
When load voltage is 24 VDC
+
−
• When 12/48 VDC is used as the load power supply, a separate 24 VDC power supply must be used as an external power supply.
24 VDC *
12/48 VDC
2 Y01
When load voltage is 24 VDC
When load voltage is 12/48 VDC
+
−
+ − + −
• When 12/48 VDC is used as the load power supply, a separate 24 VDC power supply must be used as an external power supply.
Model Rated Input Voltage Model Rated Input Voltage
12/24 VDC 12/24 VDC+ −
When load voltage is 12 VDC
24/48 VDC
+
− +
−
+ −
When load voltage is 24/48 VDC
• When 12 VDC is used as the load power supply, a separate 24/48 VDC power supply must be used as an external power supply.
Model Rated Input Voltage Model Rated Input Voltage (19)
5/12 VDC 5/12 VDC
TTL, CMOS logic
5/12 VDC
5/12 VDC 0V
Model Rated Input Voltage Model Rated Input Voltage
12/24 VDC 12/24 VDC+ −
Y1F Y1E L
12/24 VDC
12/24 VDC 0V
0V
+ −
+ −
Model Rated Input Voltage (23) Y0AY0C Y0E 37 are connected internally.
Model Rated Input Voltage (24)
AY72 5/12 VDC
Load connection
L L
Y00 Y10
Y01 Y11
Y02 Y12
Y03 Y13
Y04 Y14
Y05 Y15
Y06 Y16
Y07 Y17
Y08 Y18
Y09 Y19
Y0A Y1A
Y0B Y1B
Y0C Y1C
Y0D Y1D
Y0E Y1E
Y0F Y1F
Vacant Vacant
Vacant Vacant
5/12 VDC 0V
5/12 VDC 0V
5/12 VDC +
−
* The figure above indicates F (the first half 32 points).
The connections for L (the latter half 32 points) are the same as for F (regard Y00 to Y1F as Y20 to Y3F).
B1 and B2 , and A1 and A2 are connected internally.
TTL, CMOS logic
B20
Y00 Y10
Y01 Y11
Y02 Y12
Y03 Y13
Y04 Y14
Y05 Y15
Y06 Y16
Y07 Y17
Y08 Y18
Y09 Y19
Y0A Y1A
Y0B Y1B
Y0C Y1C
Y0D Y1D
Y0E Y1E
Y0F Y1F
Vacant Vacant
Vacant Vacant
5/12 VDC 0V
5/12 VDC 0V
5/12 VDC +
−