Building a Modern Computer From First Principles

(1)

Elements of Computing Systems, Nisan & Schocken, MIT Press, www.nand2tetris.org, Chapter 6: Assembler slide 1

www.nand2tetris.org

Building a Modern Computer From First Principles

Assembler

Where we are at:

Assembler Chapter 6 H.L. Language

&

Operating Sys.

abstract interface

Compiler

Chapters 10 - 11

VM Translator Chapters 7 - 8

Computer Architecture Chapters 4 - 5

Gate Logic

Chapters 1 - 3 Electrical

Engineering

Physics Virtual

Machine abstract interface

Software hierarchy

Assembly Language abstract interface

Hardware hierarchy Machine

Language abstract interface

Hardware Platform abstract interface

Chips &

Logic Gates abstract interface Human

Thought

Abstract design Chapters 9, 12

Why care about assemblers?

 Assemblers employ nifty programming tricks

 Assemblers are the first rung up the software hierarchy ladder

 An assembler is a translator of a simple language

 Writing an assembler = low-impact practice for writing compilers.

cross-platform compiling

0000000000010000 1110111111001000 0000000000010001 1110101010001000 0000000000010000 1111110000010000 0000000000000000 1111010011010000 0000000000010010 1110001100000001 0000000000010000 1111110000010000 0000000000010001 ...

Target code (a text file of binary Hack code)

assemble

Assembly example

// Computes 1+...+RAM[0]

// And stored the sum in RAM[1]

@i

M=1 // i = 1

@sum

M=0 // sum = 0 (LOOP)

@i // if i>RAM[0] goto WRITE D=M

@R0 D=D‐M

@WRITE D;JGT ... // Etc.

Source code (example)

The program translation challenge

 Extract the program’s semantics from the source program, using the syntax rules of the source language

 Re-express the program’s semantics in the target language, using the syntax rules of the target language

Assembler = simple translator

 Translates each assembly command into one or more binary machine instructions

 Handles symbols (e.g. i , sum , LOOP , …).

execute

(2)

Revisiting Hack low-level programming: an example

// And stores the sum in RAM[1].

@i

M=1 // i = 1

@sum M=0 // sum = 0 (LOOP)

@R0 D=D‐M

@WRITE D;JGT

@i // sum += i D=M

@sum M=D+M

@i // i++

M=M+1

@LOOP // goto LOOP 0;JMP

(WRITE)

@sum D=M

@R1

M=D // RAM[1] = the sum (END)

@END 0;JMP

Assembly program

(

sum.asm

)

CPU emulator screen shot after running this program

The CPU emulator allows loading and executing symbolic Hack code. It resolves all the symbolic symbols to memory locations, and executes the code.

program generated output

user supplied

input

The assembler’s view of an assembly program

@i

M=1 // i = 1

@R0 D=D‐M

@WRITE D;JGT

@i // sum += i D=M

@sum M=D+M

@i // i++

M=M+1

(WRITE)

@sum D=M

@R1

@END 0;JMP

Assembly program

Assembly program =

a stream of text lines, each being one of the following:

The assembler’s view of an assembly program

@i

M=1 // i = 1

@R0 D=D‐M

@WRITE D;JGT

@i // sum += i D=M

@sum M=D+M

@i // i++

M=M+1

(WRITE)

@sum D=M

@R1

@END 0;JMP

Assembly program

Assembly program =

a stream of text lines, each being one of the following:



White space



Empty lines/indentation



Line comments



In-line comments

The assembler’s view of an assembly program

@i

M=1 // i = 1

@R0 D=D‐M

@WRITE D;JGT

@i // sum += i D=M

@sum M=D+M

@i // i++

M=M+1

(WRITE)

@sum D=M

@R1

@END 0;JMP

Assembly program

Assembly program =

a stream of text lines, each being one of the following:



White space



Empty lines/indentation



Line comments



In-line comments



Instructions



A-instruction



C-instruction

(3)

The assembler’s view of an assembly program

@i

M=1 // i = 1

@sum

M=0 // sum = 0 (LOOP)

@R0 D=D‐M

@WRITE D;JGT

@i // sum += i D=M

@sum M=D+M

@i // i++

M=M+1

@LOOP// goto LOOP 0;JMP

(WRITE)

@sum D=M

@R1

@END 0;JMP

Assembly program

Assembly program =

a stream of text lines, each being one of the following:



White space



Empty lines/indentation



Line comments



In-line comments



Instructions



A-instruction



C-instruction



Symbols



references



Label declaration (XXX)

The assembler’s view of an assembly program

@16

M=1 // i = 1

@17

M=0 // sum = 0

@16 // if i>RAM[0] goto WRITE D=M

@0 D=D‐M

@18 D;JGT

@16 // sum += i D=M

@17 M=D+M

@16 // i++

M=M+1

@4// goto LOOP 0;JMP

@17 D=M

@1

M=D // RAM[1] = the sum

@22 0;JMP

Assembly program

Assembly program =

a stream of text lines, each being one of the following:



White space



Empty lines/indentation



Line comments



In-line comments



Instructions



A-instruction



C-instruction



Symbols



references



Label declaration (XXX) Assume that there is no symbol for now!

White space

@16

M=1 // i = 1

@17

M=0 // sum = 0

@16 // if i>RAM[0] goto WRITE D=M

@0 D=D‐M

@18 D;JGT

@16 // sum += i D=M

@17 M=D+M

@16 // i++

M=M+1

@4 // goto LOOP 0;JMP

@17 D=M

@1

M=D // RAM[1] = the sum

@22 0;JMP

Assembly program

Assembly program =

a stream of text lines, each being one of the following:



White space



Empty lines/indentation



Line comments



In-line comments



Instructions



A-instruction



C-instruction



Symbols



references



Label declaration (XXX)

White space → ignore/remove them

@16

M=1

@17 M=0

@16 D=M

@0 D=D‐M

@18 D;JGT

@16 D=M

@17 M=D+M

@16 M=M+1

@4 0;JMP

@17 D=M

@1 M=D

@22 0;JMP

Assembly program

Assembly program =

a stream of text lines, each being one of the following:



White space



Empty lines/indentation



Line comments



In-line comments



Instructions



A-instruction



C-instruction



Symbols



references



Label declaration (XXX)

(4)

Instructions → binary encoding

@16

M=1

@17 M=0

@16 D=M

@0 D=D‐M

@18 D;JGT

@16 D=M

@17 M=D+M

@16 M=M+1

@4 0;JMP

@17 D=M

@1 M=D

@22 0;JMP

Assembly program

Assembly program =

a stream of text lines, each being one of the following:



White space



Empty lines/indentation



Line comments



In-line comments



Instructions



A-instruction



C-instruction



Symbols



references



Label declaration (XXX)

Translating / assembling A-instructions

value (v = 0 or 1)

0 v v v v v v v v v v v v v v v

Binary:

@value // Where value is either a non-negative decimal number // or a symbol referring to such number.

Symbolic:

Translation to binary:



If value is a non-negative decimal number, simple, e.g. @16



If value is a symbol, later.

Translating / assembling C-instructions

jump dest

comp

1

1 1

a c1 c2 c3 c4 c5 c6 d1 d2 d3 j1 j2 j3 dest=comp;jump // Either the dest or jump fields may be empty.

// If dest is empty, the "=" is ommitted;

// If jump is empty, the ";" is omitted.

Symbolic:

Binary:

Translating / assembling C-instructions

jump dest

comp

1

1 1

a c1 c2 c3 c4 c5 c6 d1 d2 d3 j1 j2 j3 dest=comp;jump // Either the dest or jump fields may be empty.

// If dest is empty, the "=" is ommitted;

// If jump is empty, the ";" is omitted.

Symbolic:

Binary:

Example: MD=D+1

(5)

Translating / assembling C-instructions

jump dest

comp

1

1 1

^a ^c1 ^c2 ^c3 ^c4 ^c5 ^c6 ^d1 ^d2 ^{d3 j1} ^j2 ^j3 dest=comp;jump // Either the dest or jump fields may be empty.

// If dest is empty, the "=" is ommitted;

// If jump is empty, the ";" is omitted.

Symbolic:

Binary:

Example: D; JGT

The overall assembly logic

For each (real) command



Parse the command,

i.e. break it into its underlying fields



A-instruction: replace the symbolic reference (if any) with the corresponding memory address, which is a number



(how to do it, later)



C-instruction: for each field in the instruction, generate the corresponding binary code



Assemble the translated binary codes into a complete 16-bit machine instruction



Write the 16-bit instruction to the output file.

@i

M=1 // i = 1

@0 D=D‐M

@WRITE D;JGT

@i // sum += i D=M

@sum M=D+M

@i // i++

M=M+1

(WRITE)

@sum D=M

@1

@END 0;JMP

Assembly program

Assembly programs typically have many symbols:

 Labels that mark destinations of goto commands

 Labels that mark special memory locations

 Variables

These symbols fall into two categories:

 User–defined symbols (created by programmers)

 Variables

 Labels (forward reference could be a problem)

 Pre-defined symbols (used by the Hack platform).

Handling symbols (aka symbol resolution)

@R0 D=M

@END D;JLE

@counter M=D

@SCREEN D=A

@x M=D (LOOP)

@x A=M M=‐1

@x D=M

@32 D=D+A

@x M=D

@counter MD=M‐1

@LOOP D;JGT (END)

@END 0;JMP

Typical symbolic Hack assembly code:

Label symbols: Used to label destinations of goto commands. Declared by the pseudo-command (XXX). This directive defines the symbol XXX to refer to the instruction memory location holding the next command in the program. (the assembler needs to maintain instrCtr)

Variable symbols: Any user-defined symbol xxx appearing in an assembly program that is not defined elsewhere using the (xxx) directive is treated as a variable, and is automatically assigned a unique RAM address, starting at RAM address 16 (the assembler needs to maintain nextAddr)

(why start at 16? Later.)

By convention, Hack programmers use lower-case and upper-case to represent variable and label names, respectively

Handling symbols: user-defined symbols

@R0 D=M

@END D;JLE

@counter M=D

@SCREEN D=A

@x M=D (LOOP)

@x A=M M=‐1

@x D=M

@32 D=D+A

@x M=D

@counter MD=M‐1

@LOOP D;JGT (END)

@END

0;JMP

(6)

Virtual registers:

The symbols R0,…, R15 are automatically predefined to refer to RAM addresses 0,…,15 I/O pointers: The symbols SCREEN and KBD are

automatically predefined to refer to RAM addresses 16384 and 24576, respectively (base addresses of the screen and keyboard memory maps)

VM control pointers: the symbols SP, LCL, ARG, THIS, and THAT (that don’t appear in the code example on the right) are automatically predefined to refer to RAM addresses 0 to 4, respectively

(The VM control pointers, which overlap R0,…, R4 will come to play in the virtual machine implementation, covered in the next lecture)

@R0 D=M

@END D;JLE

@counter M=D

@SCREEN D=A

@x M=D (LOOP)

@x A=M M=‐1

@x D=M

@32 D=D+A

@x M=D

@counter MD=M‐1

@LOOP D;JGT (END)

@END 0;JMP

Handling symbols: pre-defined symbols

@i

M=1 // i = 1

@R0 D=D‐M

@WRITE D;JGT

@i // sum += i D=M

@sum M=D+M

@i // i++

M=M+1 @LOOP // goto LOOP 0;JMP (WRITE) @sum D=M @R1 M=D // RAM[1] = the sum (END) @END 0;JMP

Source code (example) This symbol table is generated by the assembler, and used to translate the symbolic code into binary code. Handling symbols: symbol table

R0 0

R1 1

R2 2

... ... R15 15

SCREEN 16384

KBD 24576

SP 0

LCL 1

ARG 2

THIS 3

THAT 4

LOOP 4

WRITE 18

END 22

i 16 sum 17

Symbol table

R0 0

R1 1

R2 2

... R15 15

SCREEN 16384

KBD 24576

SP 0

LCL 1

ARG 2

THIS 3

THAT 4

Symbol table

// Computes 1+...+RAM[0] // And stored the sum in RAM[1] @i M=1 // i = 1 @sum M=0 // sum = 0 (LOOP) @i // if i>RAM[0] goto WRITE D=M @R0 D=D‐M @WRITE D;JGT @i // sum += i D=M @sum M=D+M @i // i++

Source code (example) Initialization: create an empty symbol table and populate it with all the pre-defined symbols Handling symbols: constructing the symbol table

R0 0

R1 1

R2 2

... R15 15

SCREEN 16384

KBD 24576

SP 0

LCL 1

ARG 2

THIS 3

THAT 4

LOOP 4

WRITE 18

END 22

Symbol table

M=M+1

(WRITE)

@sum D=M

@R1

@END 0;JMP

Source code (example)

Initialization: create an empty symbol table and populate it with all the pre-defined symbols First pass: go through the entire source code, and add all the user-defined label symbols to the symbol table (without generating any code)

Handling symbols: constructing the symbol table

(7)

R0 0

R1 1

R2 2

... R15 15

SCREEN 16384

KBD 24576

SP 0

LCL 1

ARG 2

THIS 3

THAT 4

LOOP 4

WRITE 18

END 22

i 16 sum 17

Symbol table

Source code (example) Initialization: create an empty symbol table and populate it with all the pre-defined symbols First pass: go through the entire source code, and add all the user-defined label symbols to the symbol table (without generating any code) Second pass: go again through the source code, and use the symbol table to translate all the commands. In the process, handle all the user- defined variable symbols. Handling symbols: constructing the symbol table

Elements of Computing Systems, Nisan & Schocken, MIT Press, www.nand2tetris.org, Chapter 6: Assembler slide 26 R0 0

R1 1

R2 2

... R15 15

SCREEN 16384

KBD 24576

SP 0

LCL 1

ARG 2

THIS 3

THAT 4

Symbol table

M=M+1

(WRITE)

@sum D=M

@R1

@END 0;JMP

Source code (example)

Handling symbols: constructing the symbol table (one-pass solution?)

The assembly process (detailed)

 Initialization: create the symbol table and initialize it with the pre- defined symbols

 First pass: march through the source code without generating any code.

For each label declaration (LABEL) that appears in the source code, add the pair <LABEL , n > to the symbol table

The assembly process (detailed)

 Second pass: march again through the source, and process each line:



If the line is a C-instruction, simple



If the line is @xxx where xxx is a number, simple



If the line is @xxx and xxx is a symbol, look it up in the symbol table and proceed as follows:



If the symbol is found, replace it with its numeric value and complete the command’s translation



If the symbol is not found, then it must represent a new variable:

add the pair <xxx , n > to the symbol table, where n is the next available RAM address, and complete the command’s

translation.



(Platform design decision: the allocated RAM addresses are

running, starting at address 16).

(8)

Note that comment lines and pseudo-commands (label declarations) generate no code.

0000000000010000 1110111111001000 0000000000010001 1110101010001000 0000000000010000 1111110000010000 0000000000000000 1111010011010000 0000000000010010 1110001100000001 0000000000010000 1111110000010000 0000000000010001 1111000010001000 0000000000010000 1111110111001000 0000000000000100 1110101010000111 0000000000010001 1111110000010000 0000000000000001 1110001100001000 0000000000010110 1110101010000111

Target code

assemble

The result ...

@i

M=1 // i = 1

@R0 D=D‐M

@WRITE D;JGT

@i // sum += i D=M

@sum M=D+M

@i // i++

M=M+1

(WRITE)

@sum D=M

@R1

@END 0;JMP

Source code (example)

Proposed assembler implementation

An assembler program can be written in any high-level language. (and could be run in the other platforms, cross-platform compiling) The book proposes a language-independent design, as follows.