建議

REFERENCES:

Ayer, H. E., Lynch, J. R., & Fanney, J. H. (1965). A comparison of impinger and membrane filter techniques for evaluating air samples in asbestos plants. Annals of the New York Academy of Sciences, 132(1), 274-287.Bastani, A., Lee, C. S., Haghighat, F., Flaherty, C., & Lakdawala, N. (2010). Assessing the performance of air cleaning devices–A full-scale test method. Building and Environment, 45(1), 143-149.

Benjamin, Y. Y., Liu, Y. H., & Pui, D. Y. (1993). Condensation‐Induced Particle Formation during Vacuum Pump Down. Journal of The Electrochemical Society, 140(5), 1463-1468.

Biderman, N. J., Novak, S. W., Sundaramoorthy, R., Haldar, P., & Lloyd, J. R. (2015).

Insights into cadmium diffusion mechanisms in two-stage diffusion profiles in solar-grade Cu (In, Ga) Se2 thin films. Applied Physics Letters, 107(23), 232104.

Brown, S. K., Sim, M. R., Abramson, M. J., & Gray, C. N. (1994). Concentrations of volatile organic compounds in indoor air–a review. Indoor air, 4(2), 123-134.

Burnett, J. (1985). Why Class 1 practice. Microcontamination, 3(5), 32-36.

Chuang, T. S., & Chang, L. M. (2010). AMC Control through ultra-pure air for nano-tech environment. In The 5th civil engineering conference in Asian region &

Australasian structural engineering conference (p. 685e90).

Chuang, T. S., & Chang, L. M. (2013). To mitigate airborne molecular contamination through ultra-pure air system. Building and Environment, 59, 153-163.

Chuang, T. S., & Chang, L. M. (2013). Ultra-pure air (UPA) for AMC control in nano-processing environment. Journal of the Chinese Institute of Engineers, 36(8), 965-979.

Chuang, T. S., Huang, C. J., & Kuo, C. W. (2016). U.S. Patent No. 9,352,263.

Chuang, T. S., & Kuo, C. W. (2014). U.S. Patent Application No. 14/475,164.

Chuang, T. S., & Kuo, C. W. (2015). U.S. Patent Application No. 14/700,140.

Cofer, W. R., Collins, V. G., & Talbot, R. W. (1985). Improved aqueous scrubber for collection of soluble atmospheric trace gases. Environmental science &

technology, 19(6), 557-560.

Cooper, D. (1988). Statistical analysis relating to recent Federal Standard 209 (cleanrooms) revisions. The Journal of Environmental Sciences, 31(2), 32-36.

Cooper, D. W. (1986). Particulate contamination and microelectronics manufacturing:

an introduction. Aerosol Science and Technology, 5(3), 287-299.

Dasgupta, P. K. (1984). A diffusion scrubber for the collection of atmospheric gases. Atmospheric Environment (1967), 18(8), 1593-1599.

David C.. Cooper, & Alley, F. C. (2002). Air pollution control: A design approach.

Waveland Press, 417-449.

Do, D. D., & Rice, R. G. (1990). Applicability of the external-diffusion model in adsorption studies. Chemical engineering science, 45(5), 1419-1421.

Emmenegger, L., Mohn, J., Sigrist, M., Marinov, D., Steinemann, U., Zumsteg, F., &

Meier, M. (2004). Measurement of ammonia emissions using various techniques in a comparative tunnel study. International journal of environment and pollution, 22(3), 326-341.

Feng, Y., Liu, G. J., Yan, C. L., Hao, Y. Q., Wang, Y., Li, Z. J., & Lu, P. (2014). A study on the law of oxidation rate in GaAs-based VCSELs. Optik-International Journal for Light and Electron Optics, 125(18), 5124-5127.

Fick, A. (1855). Ueber diffusion. Annalen der Physik, 170(1), 59-86.

Fletcher, N. H. (2011). The physics of rainclouds. Cambridge University Press, 31-102.

Forsland, M., & O’Reilly,S.(2000). Prevention of Airborne Molecular Contamination. Semiconductor Fabtech, 12, 129-135.

Gonzàlez-Aguirre, P., Fontaine, H., Beitia, C., Ohlsen, J., Lundgren, J., & Lee, P.

(2013). A comparative study of the HF sorption and outgassing ability of different Entegris FOUP platforms and materials. Microelectronic Engineering, 105, 113-118.

Goodman, G. G., Lindley, P. M., & McCaig, L. (1999). Monitoring of Cleanroom Airborne Molecular Contamination by Time-of-Flight SIMS. In ANNUAL TECHNICAL MEETING-INSTITUTE OF ENVIRONMENTAL SCIENCES AND TECHNOLOGY (Vol. 45, pp. 131-137).

Guo, H., Lee, S. C., & Chan, L. Y. (2004). Indoor air quality investigation at

total environment, 323(1), 87-98.

Haghighat, F., Lee, C. S., Pant, B., Bolourani, G., Lakdawala, N., & Bastani, A. (2008).

Evaluation of various activated carbons for air cleaning–Towards design of immune and sustainable buildings. Atmospheric environment, 42(35), 8176-8184.

Higley, J. K., & Joffe, M. A. (1996). Airborne molecular contamination: cleanroom control strategies. Solid State Technology, 39(7), 211-214.

Hu, J., Xiao, X. D., Ogletree, D. F., & Salmeron, M. (1995). Imaging the condensation and evaporation of molecularly thin films of water with nanometer resolution.

Science, 268(5208), 267.

Hu, S. C., Wu, T. M., Lin, H. C., & Hsu, K. (2007). Design and evaluation of a nitrogen purge system for the front opening unified pod (FOUP). Applied Thermal Engineering, 27(8), 1386-1393.

Huang Chun-Chao, Tsai Chuen-Jinn. (2003). Emission Characteristics of Inorganic Acid and Base Waste Gas and Control Efficiency of Packed Towers in High-tech Industry, Institute of Environmental Engineering Master Thesis, National Chiao Tung University.

Ismail, I. M., & Mahmoud, K. G. (1994). Comparative study of different air-conditioning systems incorporating air washers. International journal of refrigeration, 17(6), 364-370.

Jaenicke, R. (1972). The optical particle counter: cross-sensitivity and coincidence. Journal of Aerosol Science, 3(2), 95-111.

Jeong, J., Sekiguchi, K., Saito, M., Lee, Y., Kim, Y., & Sakamoto, K. (2006). Removal of gaseous pollutants with a UV-C 254+ 185 nm/TiO 2 irradiation system coupled with an air washer. Chemical engineering journal, 118(1), 127-130.

Jonas, L. A., & Rehrmann, J. A. (1973). Predictive equations in gas adsorption kinetics. Carbon, 11(1), 59-64.

Kamoshima, T., Fujii, Y., Noguchi, T., Saeki, T., Takata, Y., Ochi, H., & Koiwa, A.

(2008). Controlling ambient gas in slot-to-slot space inside FOUP to suppress Cu-loss after dual damascene patterning. IEEE Transactions on Semiconductor Manufacturing, 21(4), 573-577.

Kinkead, D., Joffe, M., Higley, J., & Kishkovich, O. (1995). Forecast of airborne

molecular contamination limits for the 0.25 micron high performance logic process. Technology transfer, 95, 052.

Kitajima, H., & Shiramizu, Y. (1997). Requirements for contamination control in the Gigabit era. IEEE transactions on semiconductor manufacturing, 10(2), 267-272.

Kozlik, M., Forker, R., & Fritz, T. (2015). Principal processes of organic–inorganic hybrid solar cells using the example of ZnPc with ZnO. physica status solidi (a), 212(3), 554-560.

Kumar, A., Ahmed, L., & Camenzind, M. J. (2001). Investigating yield loss caused by airborne organophosphates. Micro (pp. 41-48).

Kuo, C. W., & Chang, L. M. (2016). A new method for sampling low-volume AMCs in a front opening unified pod. Microelectronic Engineering, 166, 26-30.

Kuo, C. W., & Chang, L. M. (2017). A Simple and Rapid Method to Detect Low-Concentration Boron and Phosphorus Contaminants in Cleanrooms. IEEE Transactions on Semiconductor Manufacturing, 30(1), 114-118.

Kuo, C. W., Chuang, T. S., & Chang, L. M. (2017). A rapid tool for emission outlet concentration simulation of scrubber and make-up air unit at different inlet concentrations. Building Services Engineering Research and Technology, DOI:10.1177/0143624417701984.

Kuo, C. W., Chuang, T. S., & Chang, L. M. (2017). New model to predict activated carbon filter performance at different inlet concentrations employing filter accelerated test. Science and Technology for the Built Environment, DOI:10.1080/23744731.2017.1325641.

Kuo, C. W., Hung, Y. K., & Chuang, T. S. (2012). U.S. Patent Application No.

13/602,528.

Lebens, J. A., McColgin, W. C., Russell, J. B., Mori, E. J., & Shive, L. W. (1996).

Unintentional doping of wafers due to organophosphates in the clean room ambient. Journal of the Electrochemical Society, 143(9), 2906-2909.

Lin, I. K., Bai, H., & Wu, B. J. (2009). Surface deposition of ionic contaminants on silicon wafers in a cleanroom environment. IEEE Transactions on Semiconductor Manufacturing, 22(2), 321-327.

Liu, R. T., & Huza, M. A. (1995). Filtration and indoor air quality: a practical

approach. ASHRAE Journal, 37(2).

Lodewyckx, P., Wood, G. O., & Ryu, S. K. (2004). The Wheeler–Jonas equation: a versatile tool for the prediction of carbon bed breakthrough times. Carbon, 42(7), 1351-1355.

Lodge Jr, J. P. (1988). Methods of air sampling and analysis. CRC Press, 106-170.

Lv, Y. K., Jiang, M., Liu, B., Zeng, L. H., Ren, Y., Huang, Y. H., ... & Yao, L. M.

(2014). Study of solving the outgas induced defect in Metal Hard Mask All-In-One etch process. ECS Transactions, 60(1), 323-329.

MacDonald, S. A., Clecak, N. J., Wendt, H. R., Willson, C. G., Snyder, C. D., Knors, C.

J., ... & Holmes, S. J. (1991). Airborne chemical contamination of a chemically amplified resist. In Advances in Resist Technology and Processing VIII (pp. 2-12).

International Society for Optics and Photonics.

Mackay, D., & Shiu, W. Y. (1981). A critical review of Henry’s law constants for chemicals of environmental interest. Journal of physical and chemical reference data, 10(4), 1175-1199.

Meininghaus, R., Salthammer, T., & Knöppel, H. (1999). Interaction of volatile organic compounds with indoor materials—a small-scale screening method. Atmospheric Environment, 33(15), 2395-2401.

Muller, A. J., Psota-Kelty, L. A., Krautter, H. W., & Sinclair, J. D. (1994). Volatile cleanroom contaminants: sources and detection. Solid State Technology, 37(9), 61-68.

Muller, C. (2006). The ITRS and AMC: More control on the way?. Cleanrooms, 5, 4-21.

Myers, A. L., & Prausnitz, J. M. (1965). Thermodynamics of mixed‐gas adsorption. AIChE Journal, 11(1), 121-127.

Navarri, P., Marchal, D., & Ginestet, A. (2001). Activated carbon fibre materials for VOC removal. Filtration & separation, 38(1), 33-40.

Nelson, J. P., Glassburn Jr, A. R., Talbott, R. D., & Mcelhinney, J. P. (1973). Clean room operating rooms. Clinical orthopaedics and related research, 96, 179-187.

Okuyama, K., Kousaka, Y., Tohge, N., Yamamoto, S., Wu, J. J., Flagan, R. C., &

Seinfeld, J. H. (1986). Production of ultrafine metal oxide aerosol particles by

thermal decomposition of metal alkoxide vapors. AIChE Journal, 32(12), 2010-2019.

Onda, K., Takeuchi, H., & Okumoto, Y. (1968). Mass transfer coefficients between gas and liquid phases in packed columns. Journal of Chemical Engineering of Japan, 1(1), 56-62.

Overrein, L. N. (1972). Sulphur pollution patterns observed: leaching of calcium in forest soil determined. AMBIO. VOL 1, NO 4, P 145-147. 1972. ILLUS.

Pilinis, C., & Seinfeld, J. H. (1988). Development and evaluation of an Eulerian photochemical gas-aerosol model. Atmospheric Environment (1967), 22(9), 1985-2001.

Popescu, R. S., Blondeau, P., Jouandon, E., Costes, J. C., & Fanlo, J. L. (2013).

Elemental modeling of adsorption filter efficiency for indoor air quality applications. Building and Environment, 66, 11-22.

Ruede, D., Ereken, M., & Borgers, T. (2001). The impact of airborne molecular bases on DUV photoresists. Solid State Technology, 44(8), 63-63.

Seo, J., Kato, S., Ataka, Y., & Chino, S. (2009). Performance test for evaluating the reduction of VOCs in rooms and evaluating the lifetime of sorptive building materials. Building and environment, 44(1), 207-215.

Shive, L., Blank, R., & Lamb, K. (2001). Investigating the formation of time-dependent haze on stored wafers. MICRO-SANTA MONICA-, 19(3), 59-76.

Shiue, A., Den, W., Kang, Y. H., Hu, S. C., Jou, G. T., Lin, C. H., ... & Lin, S. I. (2011).

Validation and application of adsorption breakthrough models for the chemical filters used in the make-up air unit (MAU) of a cleanroom. Building and Environment, 46(2), 468-477.

Sidheswaran, M. A., Destaillats, H., Sullivan, D. P., Cohn, S., & Fisk, W. J. (2012).

Energy efficient indoor VOC air cleaning with activated carbon fiber (ACF) filters. Building and Environment, 47, 357-367.

Stevie, F. A., Martin Jr, E. P., Kahora, P. M., Cargo, J. T., Nanda, A. K., Harrus, A.

S., ... & Krautter, H. W. (1991). Boron contamination of surfaces in silicon microelectronics processing: characterization and causes. Journal of Vacuum Science & Technology A: Vacuum, Surfaces, and Films, 9(5), 2813-2816.

Tamaoki, M., Nishiki, K., Shimazaki, A., Sasaki, Y., & Yanagi, S. (1995). The effect of airborne contaminants in the cleanroom for ULSI manufacturing process.

In Advanced Semiconductor Manufacturing Conference and Workshop, 1995.

ASMC 95 Proceedings. IEEE/SEMI 1995 (pp. 322-326). IEEE.

Tamm, C. O., & Cowling, E. B. (1977). Acidic precipitation and forest vegetation. Water, Air, & Soil Pollution, 7(4), 503-511.

Thomas, R. (2013). Practical guide to ICP-MS: a tutorial for beginners. CRC press, 11-54.

Tsai, C. J., Chang, C. T., Liu, T. W., Huang, C. C., Chien, C. L., & Chein, H. M. (2004).

Emission characteristics and control efficiency of acidic and basic gases and aerosols from packed towers. Atmospheric Environment, 38(4), 643-646.

Tsai, C. J., Miao, C. C., & Lu, H. C. (1997). White smoke emission from a semiconductor manufacturing plant. Environment international, 23(4), 489-496.

VanOsdell, D. W., Owen, M. K., Jaffe, L. B., & Sparks, L. E. (1996). VOC removal at low contaminant concentrations using granular activated carbon. Journal of the Air

& Waste Management Association, 46(9), 883-890.

VanOsdell, D. W., & Sparks, L. E. (1995). Carbon adsorption for indoor air cleaning. ASHRAE Journal, 37(2).

Van Zant, P. (2004). Microchip fabrication. McGraw-Hill, Inc., 77-114.

Vizhemehr, A. K., Haghighat, F., & Lee, C. S. (2013). Predicting gas-phase air-cleaning system efficiency at low concentration using high concentration results:

Development of a framework. Building and Environment, 68, 12-21.

Wakamatsu, H., Matsuki, M., Tanaka, N., Ogata, H., Iba, H., & Murata, K. (2000).

High efficiency airborne molecular contaminants removal technology by a new cooled-type 2-stage high-speed air washer method. In Semiconductor Manufacturing, 2000. Proceedings of ISSM 2000. The Ninth International Symposium on (pp. 289-292). IEEE.

Wang, J., & Balazs, M. (2000). Analytical technique compares dopants in Fab air and on wafers. Semiconductor International, March, (pp. 32-35).

Wheeler, A., & Robell, A. J. (1969). Performance of fixed-bed catalytic reactors with poison in the feed. Journal of Catalysis, 13(3), 299-305.

Whyte, W. (2010). Cleanroom technology: fundamentals of design, testing and operation. John Wiley & Sons, 11-40.

Wolkoff, P., & Nielsen, G. D. (2001). Organic compounds in indoor air—their relevance for perceived indoor air quality?. Atmospheric Environment, 35(26), 4407-4417.

Xiang, B. H., Junmei, W., Pinghui, Z., & Xun, L. (2000). Experimental study of a pneumatic spray air washer [J]. HV & AC, 1, 014.

Yang, R. T., & Doong, S. J. (1985). Gas separation by pressure swing adsorption: A pore‐diffusion model for bulk separation. AIChE Journal, 31(11), 1829-1842.

Yoon, Y. H., & NELSON, J. H. (1984). Application of gas adsorption kinetics I. A theoretical model for respirator cartridge service life. The American Industrial Hygiene Association Journal, 45(8), 509-516.

Yoon, Y. H., & NELSON, J. H. (1984). Application of gas adsorption kinetics—II. A theoretical model for respirator cartridge service life and its practical applications. The American Industrial Hygiene Association Journal, 45(8), 517-524.