本研究主要以溶膠-凝膠法合成含雙鍵之 TiO2-SiO2 前驅物反應單體，
分別合成出具光學性質之複合膜及具導電能力之固態離子液體聚合複合物。
綜合分析實驗數據，做了以下的總結：
1. 添加 TiO2-SiO2前驅物反應單體至高折率有機單體並光聚合成複合膜，能 提升熱穩定性、透光性及折射率。
2. 具光學性質之複合膜其厚度越薄，折射率也越高。
3. 添加適量 TiO2-SiO2 前驅物反應單體至離子液體並熱聚合形成固態離子 液體聚合物，能提升導電度。
對於 TiO2-SiO2前驅物反應單體的合成，提出下列未來研究工作：
1. 修正以溶膠-凝膠法合成 TiO2-SiO2 前驅物反應單體的條件，改善同質縮 合的問題。
2. 混成交聯固態離子液體聚合物再進一步組裝成固態染料敏化太陽能電池，
探討其添加不同比例之 TiO2-SiO2前驅物反應單體其 Voc、Jsc、FF 及效率 的變化。
參考文獻
poly(ether urethane)/poly(ethylene oxide) polymer electrolyte for all-solid-state dye-sensitized solar cells”, Chemical Communications, 3895-3897 (2009).[6] X. Chen, Q. Li, J. Zhaoa, L.a Qiua, Y. Zhang, B. Sun, F. Yan,
“Ionic liquid-tethered nanoparticle/poly(ionic liquid) electrolytes for quasi-solid-state dye-sensitized solar cells”, Journal of Power Sources, 207, 216-221 (2012).
[7] R.F.S. Lenza, W.L. Vasconcelos, “Synthesis of titania-silica materials by sol-gel”, Materials Research, 5, 4, 497-502 (2002).
[8] S. Sakka, “Sol-gel technology as reflected in journal of sol-gel science and technology”, Journal of Sol-Gel Science and Technology
26, 29-33 (2003).
[9] 張光偉, 洪健益, 林雅惠, 田珮, 蒲盈志,“溶膠與凝膠混成材料--合成、製備與應用”, 化工技術, 2 月號, 34-49 (2013).
[10] Jirgensons, B.; Straumanis, M. E. “A short textbook of colloid chemistry”, McMillan Co., New York, USA (1962).
[11] M. Schraml-Marth, K.L. Walther, A. Wokaun, “Porous silica gels and TiO2/SiO2 mixed oxides prepared via the sol-gel process ： Characterization by spectroscopic techniques”, Journal of Non-Crystalline Solids, 143, 93-111 (1992).
[12] R.S.A. de Lange, J.H.A. Hekkink, K. Keizer, A.J.
Burggraaf, ”Polymeric-silica-based sols for membrane modification applications：Sol-gel synthesis and characterization with SAXS”, Journal of Non-Crystalline Solids, 191, 1-16 (1995).
[13] I.M.M. Salvado, F.M.A. Margaça, J. Teixeira, “A SANS study of xTiO2 SiO2 gels with low titania content”, Journal of Non-Crystalline Solids, 163, 115-124 (1993).
[14] X. Orignac, H.C. Vasconcelos, R.M. Almeida, “Structural study of SiO2-TiO2 sol-gel films by x-ray absorption and photoemission spectroscopies”, Journal of Non-Crystalline Solids, 217, 155-161 (1997).
[15] M. Aizawa, Y. Nosaka, N. Fujii, “Preparation of TiO2 SiO2 glass via sol-gel process containing a large amount of chlorine”, Journal of
Non-Crystalline Solids, 168, 49-55 (1994).
[16] B. Wang, G.L. Wilkes, “ High refractive-index ceramic/polymer hybrid material”, U.S. Patent No. 5109080 (1992).
[17] M. Yoshida, P.N. Prasad, “Sol-gel-processed SiO2/TiO2/Poly(vinylpyrrolidone) composite materials for optical waveguides”, Chemistry of Materials, 8, 235-241 (1996).
[18] M. Yoshida, M. Lal, N.D. Kumar, P.N. Prasad, “TiO2
nano-particle-dispersed polyimide composite optical waveguide materials through reverse micelles”, Journal of materials science, 32, 4047-4051 (1997).
[19] L.H. Lee, W.C. Chen, “High-refractive-index thin films prepared from trialkoxysilane-capped poly(methyl methacrylate)-titania materials” Chemistry of Materials, 13, 1137-1142 (2001).
[20] C.C. Chang, W.C. Chen, “ Synthesis and optical properties of polyimide-silica hybrid thin films”, Chemistry of Materials, 14, 4242-4248 (2002).
[21] J. L. H. Chau, Y.M. Lin, A.K. Li, W.F. Su, K.S. Chang, S.L.C. Hsu, T.L. Li, “Transparent high refractive index nanocomposite thin films”, Materials Letters , 61, 2908-2910 (2007).
[22] C.C. Chang, L.P. Cheng, F.H. Huang , C.Y. Lin, C.F. Hsieh, W.H, Wang, “Preparation and characterization of TiO2 hybrid sol for uv-curable high-refractive-index organic-inorganic hybrid thin films”,
Journal of Sol-Gel Science and Technology, 55, 199-206 (2010).
[23] R. Himmelhuber, P. Gangopadhyay, R.A. Norwood, D.A. Loy, N.
Peyghambarian, “Titanium oxide sol-gel films with tunable refractive index”, Optical Materials Express, 1, 252-258 (2011).
[24] 蔡介銘, 許勝豪, 王浚安, 涂煜杰, 蔡欣潔, 何俊智, 林唯芳, 化 工技術, 3 月號, 131-141 (2013).
[25] K.H. Wu , K.F. Cheng , C.C. Yang , C.P. Wang, Chi-I Liu,
“Thermal and optical properties of epoxy/siloxane hybrimer based on sol-gel-derived phenyl-siloxane”, Open Journal of Composite Materials, 5, 49-59 (2015).
[26] J. Liu, M. Ueda, “High refractive index polymers： Fundamental research and practical applications”, Journal of Materials Chemistry, 19, 8907-8919 (2009).
[27] A. Hodroj, O. Chaix-Pluchery, M. Audier, U. Gottlieb, J.L.
Deschanvres, “Thermal annealing of amorphous Ti-Si-O thin films”, Journal of Materials Research, 23, 755-759 (2008).
[28] V.A. Zeitler, C.A. Brown, “The infrared spectra of some Ti-O-Si, Ti-O-Ti and Si-O-Si compounds”, The Journal of Physical Chemistry, 61, 1174-1177 (1957).
[29] “Infrared analysis of organosilicon compounds ： spectra-structure correlations”, Burnt Hills, New York 12027, complied by Philip J.
Launer, Laboratory For Materials, Inc.
[30] M. Miskam, N.K.A. Bakar, S. Mohamad, “ Preparation and characterization of new sol-gel titanium(IV)butoxide-cyanopropyltriethoxysilane hybrid sorbent for extraction of polar aromatic amines”, Journal of Sol-Gel Science and Technology , 67, 121-129 (2013).
[31] Keith E. Johnson, “What’s an ion liquid？” The Electrochemical Society Interface Spring 38-41 (2007).
[32] J. Yuan, M. Antonietti, “Poly(ionic liquid)s：Polymers expanding classical property profiles”, Polymer, 52, 1469-1482 (2011).
[33] N.V. Plechkova, K.R. Seddona, “Applications of ionic liquids in the chemical industry”, Chemical Society Reviews, 37, 123-150 (2008).
[34] J. Yuan, D. Mecerreyesb, M. Antoniettia, “Poly(ionic liquid)s: an update”, Progress in Polymer Science, 38, 1009-1036 (2013).
[35] W. Ogihara, S. Washiro, H. Nakajima, H. Ohno, “Effect of cation structure on the electrochemical and thermal properties of ion conductive polymers obtained from polymerizable ionic liquids”, Electrochimica Acta, 51, 2614-2619 (2006).
[36] J. Yuan, M. Antonietti, “Poly(ionic liquid) latexes prepared by dispersion polymerization of Ionic Liquid monomers”, Macromolecules, 44, 744-750 (2011).
[37] J. Juger, F. Meyer, F. Vidal, C. Chevrot, D. Teyssie, “Synthesis, polymerization and conducting properties of an ionic liquid-type
anionic monomer”, Tetrahedron Letters, 50, 128-131 (2009).
[38] M. Hirao, K. Ito, H. Ohno, “Preparation and polymerization of new organic molten salts ； N-alkylimidazolium salt derivatives”, Electrochimica Acta 45 1291-1294 (2000).
[39] M. Yoshizawa, H. Ohno, “Synthesis of molten salt-type polymer brush and effect of brush structure on the ionic conductivity”, Electrochimica Acta 46, 1723-1728 (2001).
[40] H. Chen, J. Choi, D.S. Cruz, K.I. Winey, Y.A. Elabd, “Polymerized ionic liquids： The effect of random copolymer composition on ion conduction”, Macromolecules, 42, 4809-4816 (2009).
[41] B. Lin, L. Qiu, J. Lu, F. Yan, “ Cross-linked alkaline ionic liquid-based polymer electrolytes for alkaline fuel cell applications”, Chemistry of Materials Article, 22, 6718-6725 (2010).
[42] M. M. Obadia, G. Colliat-Dangus, A. Debuigne, A. Serghei, C.
Detrembleurb, E. Drockenmuller, “Poly(vinyl ester 1,2,3-triazolium)s：
A new member of the poly(ionic liquid)s family”, Chemical Communications, 51, 3332-3335 (2015).
[43] X. Chen, J. Zhao, J. Zhang, L. Qiu, D. Xu, H. Zhang, X. Han, B. Sun, G. Fu, Y. Zhanga, F. Yan, “Bis-imidazolium based poly(ionic liquid) electrolytes for quasi-solid-state dye-sensitized solar cells”, Journal of Materials Chemistry, 22, 18018-18024 (2012).
[44] Ni. Tiautit, C. Puratane, S. Panpinitand S. Saengsuwan, “Effect of
SiO2 and TiO2 nanoparticles on the Performance of dye-sensitized solar cells using PVDF-HFP/PVA gel electrolytes”, Energy Procedia, 56, 378-385 (2014).
[45] C. D. Doyle, “ Estimating thermal stability of experimental polymers by empirical thermogravimetric analysis”, Analytical Chemistry, 33, 77-79 (1961).
[46] S.J. Park, H.C. Kim, H.I. Lee, D.H. Suh, “Thermal stability of imidized epoxy blends initiated by n-benzylpyrazinium hexafluoroantimonate salt”, Macromolecules, 34, 7573-7575 (2001).
[47] C. L. Chiang, R. C. Chang, Y. C. Chiu, “Thermal stability and degradation kinetics of novel organic/inorganic epoxy hybrid containing nitrogen/silicon/phosphorus by sol-gel method”, Thermochimica Acta, 453, 97-104 (2007).
[48] J. Zhang, Y. Yang, S. Wu, S. Xu, C. Zhou, H. Hu, B. Chen, X. Xiong, B. Sebo, H. Hanand X. Zhao, “End-functional silicone coupling agent modified PEO/P(VDF-HFP)/SiO2 nanocomposite polymer electrolyte DSSC”, Nanotechnology 19 , 245202-245212 (2008).