[1] M. Shvartsas, and S. Ben-Yaakov, “A SPICE Compatible Model of High Intensity Discharge Lamps,” IEEE Power Electronics Specialists Conference, vol. 2, pp. 1037 – 1042, June. 1999.
[2] J. Olsen, and W.P. Moskowitz, “Time Resolved Measurements of HID Lamp Acoustic Frequency Spectra,” IEEE Industry Applications Conference, vol. 3, pp. 2111 – 2116, Oct. 1998.
[3] P. van Tichelen, D. Weyen, and G. Meynen, “Test Results from High Intensity Discharge Lamps with Current Supplied at 50 Hz, 400 Hz and Modulated Between 15 and 35 kHz,” IEEE Industry Applications Conference, vol. 4, pp. 2225 – 2230, Oct. 1996.
[4] 宋明俊，林再福，謝憲坤，莫清賢，“複金屬燈點特性研究，＂第 二十一屆電力工程研討會，2000。
[5] J. Zhou, L. Ma, and Z. Qian, “A Novel Method for Testing Acoustic Resonance of HID Lamps,” Proc, IEEE Applied Power Electronics Conference and Exposition, vol. 1, pp. 480 – 485, March. 1999.
[6] Y.C. Hsieh, C. S. Moo, H. W. Chen, and M. J. Soong, “Detection of Acoustic Resonance in Metal Halide Lamps,” Proc, IEEE International Symposium on Industrial Electronics, vol. 2, pp. 881 – 885, June. 2001.
[7] 謝耀慶，宋俊明，陳憲玟，莫清賢，“複金屬燈音頻共振特性研究，＂
第二十一屆電力工程研討會，2000。
[8] J. Olsen, W. P. Moskowitz, “Optical measurement of acoustic resonance frequencies in HID lamps,” IEEE Industry Applications Conference, vol.
3, pp. 2263 – 2269, 1997.
[9] M. H. Ohsato, S. Inarida, G. Kimura, M. Shioya, and Kawaguchi, “New Type of Ballast for HID Lamps Using Series Resonant Circuit,” IEEE International Conference on Industrial Electronics, Control, Instrumentation, and Automation, vol. 1, pp. 191 – 195, Nov. 1992.
[10] C. S. Moo, S. Y. Chan, and C. R. Lee, “A Single-Stage High Power Factor Electronic Ballast with Duty-Ratio Controlled Series Resonant Inverter,” IEEE Transactions on Industrial Electronics, vol. 46, Issue. 4, pp. 830 – 832, Aug. 1999.
[11] J. M. Alonso, C. Blanco, A. J. Calleia, E. Lopez, and M. Rico,
“Current-Clamped Resonant Inverter: Analysis and Design as a High Pressure Sodium Lamp Ballast,” Proc, IEEE Power Electronics Specialists Conference, vol. 2, pp. 999 – 1005, June 1996.
[12] L. Laskai, P. N. Enjeti, and I. J. Pitel, “White-noise modulation of high-frequency high-intensity discharge lamp ballasts,” IEEE Transactions on Industrial Electronics, vol. 34, pp .597–605, May. 1998.
[13] 梁從主，經濟部工業局九十年度工業技術人才培訓計畫講義，專案 計畫名稱：電機工業人才培訓計畫，課程名稱：HID 電子燈電子式 安定器設計與研製，八月，2001。
[14] 蔡慶龍，低功率複金屬燈與周邊裝置，工研院能資所，2003。
[15] H. Peng, S. Ratanapanachote, P. Enjeti, L. Laskai, and I. Pitel,
“Evaluation of Acoustic Resonance in Metal Halide Lamps and an Approach to Detect its Occurrence,” Proc, IEEE Industry Applications Conference, pp. 2276-2283, 1997.
[16] J. H. Campbell, “Initial Characteristics of High Intensity Discharge Lamps on High Frequency Power,” Illuminating Engineering Society, vol. 64, no. 12, pp. 713, 1969.
[17] H. H. Dahm, “New Reflection-Type Headlamps Using HID Technology,” Automotive Design Advancements in Human Factors.
Warrendale, PA: Society Automotive Engineers, Inc. vol. SP 96/1166, pp.
153-156, 1996.
[18] A. Reatti, “Low-Cost High Power-Density Electronic Ballast for Automotive HID Lamp,” IEEE Transactions on Power Electronics, vol.
15, Issue. 2, pp. 361 – 368, March. 2000.
[19] M. Ponce, A. Lopez, J. Correa, J. Arau, and J. M. Alonoso, “Electronic Ballast for HID Lamps with High Frequency Square Waveform to Avoid Acoustic Resonances,” Proc, IEEE Applied Power Electronics Conference and Exposition, vol. 2, pp. 658 – 663, March. 2001.
[20] W. Yan, Y.K.E. Ho, and S.Y.R. Hui, “Investigation on Methods of Eliminating Acoustic Resonance in Small Wattage High-Intensity-Discharge (HID) Lamps,” Proc, IEEE Industry Applications Conference, vol. 5, pp. 3399 – 3406, Oct. 2000.
[21] S. Wada, A. Okada, and S. Morii, “Study of HID Lamps with Reduce Acoustic Resonance,” Illuminating Engineering Society, pp. 162 – 175, 1987.
[22] M.Gulko and S. Ben-Yaakov, “A MHz Electronic Ballast for Automotive-Type HID Lamps,” Proc, IEEE Power Electronics Specialists Conference, vol. 1, pp. 39 – 45, June. 1997.
[23] H. Nishimura, H. Nagase, K. Uchihashi, T. Shiomi and M. Fukuhara, “A New Electronic Ballasts for HID Lamps,” Illuminating Engineering Society, pp. 70-76, 1988.
[24] J. Olsen, and W. P. Moskowitz, “Time Resolved Measurements of HID Lamp Acoustic Frequency Spectra,” Proc, IEEE Industry Applications
Conference, vol. 3, pp. 2111 – 2116, Oct. 1998.
[25] H. Peng, S. Ratanapanachote, P. Enjeti, L. Laskai, I. Pitel, “Evaluation of Acoustic Resonance in Metal Halide (MH) Lamps and an Approach to Detect its Occurrence,” Proc, IEEE Industry Applications Conference, vol. 3, pp. 2276 – 2283, Oct. 1997.
[26] W. W. Byszewski, Y. M. Li, A. B. Budinger and P. D. Gergor, “Starting Of Metal Halide Lamps,” Proc, IEEE International Conference on Plasma Science, pp 87 – 87, June. 1992.
[27] Chin S. Moo, Chunk K. Huang, and Ying N. Hsiao, “High-Frequency Electronic Ballast with Auto-Tracking Control for Metal Halide Lamps,”
Proc, IEEE Industry Applications Conference, vol. 2, pp. 1025 – 1029, Oct. 2003.
[28] T. J. Liang, K. H. Su, and W. H. Fu, “High Frequency Electrical Circuit Model of Metal-Halide Lamp,” Proc, IEEE Applied Power Electronics Conference and Exposition, vol. 2, pp. 1163 – 1167, Feb. 1998.
[29] 宋明俊，複金屬燈特性研究，中山大學電機工程學系碩士論文，
2000。
[30] M. M. Jovanovic, D. M. Tsang, and F. C. Lee, “Reduction of voltage stress in integrated high-quality rectifier-regulators by variable frequency control,” Proc, IEEE Applied Power Electronics Conference, pp. 569–575. 1994.
[31] Huai Wei, and Issa Batarseh, “Comparison of Basic Converter Topologies for Power Factor Correction,” Proc, IEEE Southeastcon, pp.
348 – 353, April. 1998.
[32] H. Kakehashi, M. Habu, T. Ninomiya, H. Ogasawara, and, Y. Ohta,
“HID-Lamp Igniter Using a Two-Stage Magnetic-Pulse-Compression
Circuit,” Proc, IEEE Applied Power Electronics Conference and Exposition, vol. 2, pp. 1174 – 1178, Feb. 1998
[33] H. Kakehashi, M. Habu, T. Ninomiya, M. Shoyama, H. Ogasawara, and Y. Ohta, “Analysis of an HID-Lamp Igniter Using a Two-Stage Magnetic-Pulse-Compression Circuit,” Proc, IEEE Power Electronics Specialists Conference, vol. 2, pp. 1768 – 1773, May. 1998.
[34] Chin S. Moo, Tsai F. Lin, and Ying C. Chuang, “Designing an Ignitor for Short-Arc Xenon Lamps,” IEEE Industry Applications Conference, 1999 [35] 陳丹江，張仲超，單級功率因數校正電路的直流母線電壓分析和實
驗研究，浙江大學電力電子研究所。
[36] Yan Jiang, Jinghai Zhou, and Zhaoming Qian, “A Novel Single Stage Single Switch PFC Converter with Constant Power Control for Ballast for Medium HID Lamps,” Proc, IEEE Industry Applications Conference, vol. 5, pp. 3415 – 3418. Oct. 2000.
[37] C. Qian and K. M. Smedley, “A topology survey of single-stage power factor corrector with a boost type input-current shaper,” Proc, IEEE Applied Power Electronics Conference, pp. 460 – 467. Feb. 2000.
[38] M. Madigan, R. Erickson, and E. Ismail, “Integrated high quality rectifier-regulators,” Proc, IEEE Power Electronics Specialists Conference, pp. 1043 – 1051. 1992.
[39] J. Qian, Q. Zhao, and F. C. Lee, “Single-stage single-switch powerfactor-correction AC/DC converters with DC-bus voltage feedback for universal line applications,” IEEE Transactions on Power Electronics, vol. 13, pp. 1079 – 1088. Nov. 1998.
[40] L. Huber, and M. M. Jovanovic, “Design optimization of single-stage, single-switch input-current shapers,” Proc, IEEE Power Electronics Specialists Conference, vol. 1, pp. 519 – 526. 1997.
[41] L. Huber,and M. M. Jovanovic, “Single stage single switch isolated power supply technique with input current shaping and fast output voltage regulation for universal input voltage range application,” Proc, IEEE Applied Power Electronics Conference, pp.272-280. 1997.
[42] L. Huber, and M. M. Jovanovic, “Single-stage single-switch input-current-shapping technique with fast-output-voltage regulation,”
IEEE Transactions on Power Electronics, vol.13, pp. 476–486. May.
1998.
[43] W. W. Byszewski, A. B. Budinger, and Y. M. Li, “HID Starting: Glow Discharge and Transition to the Thermionic Arc,” Illuminating Engineering Society, pp. 3-9. Summer. 1991.
[44] G. Zaslavsky, S. Cohen, and W. Keeffe, “Improved Starting of the 100W Metal Halide Lamp,” Journal of the Illuminating Engineering Society, pp. 76-83. Summer. 1990.
[45] W. R. Alling, “Important Design Parameters for Solid-State Ballasts,”
IEEE Transactions on Industrial Electronics, vol. 25, No. 2, pp. 203-207.
Mar./Apr. 1989.
[46] Y. G. Kang, A. K. Upadhyay, and D. L. Stephens, “Analysis and Design of a Half-Bridge Parallel Resonant Converter Operating Above Resonance,” IEEE Transactions on Industy Applications, vol. 27, No. 2, pp. 386-395, March/April 1991.
[47] R. L. Steigerwald, “A Comparison of Half-Bridge Resonant Converter Topologies,” IEEE Transactions on Power Electronics, vol. 8, No. 4,
pp.386 - 395, Oct. 1993.
[48] M. K. Kazimieroczuk, “Class D Voltage-Switching MOSFET Power Amplifier,” IEE Proceedings-Electric Power Application, vol. 138, Pt. B, No. 6, pp. 285 - 296, Nov. 1991.
[49] K. H. Liu, R. Oruganti, and F. C. Lee, “Quasi-resonant converters-Topologies and characteristics,” IEEE Transactions on Power Electronics, vol. 2, No. 1, pp. 62 - 71. 1987.
[50] S. Freeland and R. D. Middlebrook, “A unified analysis of converters with resonant switches,” Proc, IEEE Power Electronics Specialists Conference, pp. 20 - 29. 1987.
[51] K. H. Liu, and F. C. Lee, “Zero-voltage switching technique in DC/DC converters,” IEEE Transactions on Power Electronics., vol. 5, No. 3, pp.
293 - 304. 1990.
[52] C. Henze, H. Martin, and D. Parsley, “Zero-voltage switching in high frequency power converters using pulse width modulation,” Proc, IEEE Applied Power Electronics Conference, pp. 33 - 40. 1988.
[53] H. Guichao, L. Ching –Shan, J. Yimin, and F. C. Lee, “Novel zero-voltage-transition PWM converters,” IEEE Transactions on Power Electronics, vol. 9, pp. 213-219. 1994.
[54] Y. S. Lee, and B. T. Lin, “Adding Active Clamping and Soft Switching to Boost-Flyback Single-Stage Isolated Power-Factor-Corrected Power Supplies” IEEE Transactions on Power Electronics, vol. 12, No.6, pp.
1017-1027 November 1997.
[55] H. J. Kim, C. S. Leu, R. Farrington, and F. C. Lee, “Clamp mode zero-voltage-switched multi-resonant converters,” in IEEE Transactions on Power Electronics, pp 78-84. 1992
[56] Cl’audio M. C. Duarte, and Ivo Barbi, “A new family of ZVS- PWM active-clamping DC-DC boost converters: analysis, design, and experimentation,” IEEE Transactions on Power Electronics, pp. 305-312.
1996.
[57] R. Watson, F. C. Lee, and G. C. Hua, “Utilization of an active-clamp circuit to achieve soft switching in flyback converters,” IEEE Transactions on Power Electronics, pp. 162-169. 1996.
[58] Y. Hakoda, T. Ninomiya, M. Shoyma, and T. Hashimoto, “Effect of clamp capacitor on the stability of active-clamp DC-DC converters,”
IEEE Transactions on Power Electronics, pp. 355-361. 1998.
[59] D. Simonetti , J. Sebastian, J. A. Cobos, and J. Uceda, ”Analysis of the conduction boundary of a boost PFP fed by universal input,” Proc, IEEE Power Electronics Specialists Conference, pp. 1204-1208. 1996.
[60] J. Ribas, J.M. Alonso, A.J. Calleja, E. Lopez, J. Cardesin, J. Garcia, M.
Rico, “Arc Stabilization in Low-Frequency Square-Wave Electronic Ballast for Metal Halide Lamps,” Proc, IEEE Applied Power Electronics Conference and Exposition, vol. 2, pp. 1179 – 1184. Feb. 2003.
[61] 陳平修，以單級單開關高功因泛用電源輸入交直流轉換器為基礎的 複金屬燈電子安定器之設計，交通大學電機與控制工程學系碩士論 文，2004。
[62] 復旦大學電光源實驗室，電光源原理，上海人民出版社，1976。
[63] 林卓賢，汽車氙燈之電子安定器設計，交通大學電機與控制工程學 系碩士論文，2002。
[64] Ned Mohan, Tore M. Undeland, and William P. Robbins, Power Electronics: Converters, Applications, and Design, John Wiley & Sons, Inc. 2003.
[65] 吳財福、余德鴻，電子安定器綜論，全華書局，1995。