Anzalone, P. and Clarke, C.: 2003, The Siren’s Call, ACADIA 22, Indianapolis, pp.325-335.
Bechthold, M.: 2004, Surface Structures: digital design and fabrication, ACADIA 23, Cambridge, pp.88-99.
Bimber, O, Encarnacao, L. M. and Stork, A.: 2000, A Multi-layered Architecture for Sketch-based Interaction within Virtual Environments. Computers & Graphics 24, pp.851-867.
Breen, J. and Stellingwerff, M.: 2005, Towards Ornamatics, eCAADe 23, Lisbon, Portugal, pp.253-260.
Do, E. Y.-L.: 1996, The Right Tool at the Right Time-drawing as an interface to knowledge based design aids, ACADIA ’96, Design Computation: Collaboration, Reasoning, Pedagogy, University of Arizona, Tuscon, AZ, USA pp.191-199.
Do, E. Y.-L.: 2001, VR Sketchpad: create instant 3D worlds by sketching on a transparent window, CAAD Futures 2001. Eindhoven, the Netherlands, Kluwer Academic Publishers. pp.161-172.
Dritsas, S.: 2005, The MiranScript: intuitive calculations, eCAADe 23, Lisbon, Portugal, pp.705-712.
Elys, J.: 2006, Digital Ornament, ACADIA 25, Louisville, pp.68-78.
Faruque, O.: 1984, Graphic Communication as a Design Tool, New York, Van Nostrand Reinhold.
Fraser, I. and Henmi, R.: 1994, Envisioning Architecture: An Analysis of Drawing, New York, Van Nostrand Reinhold.
Friedman, M.: 1999, Gehry Talks: Architecture + Process, New York, Universe Publishing.
FRONT: 2006, http://www.frontdesign.se/
Gao, W.-P.: 2004, Tectonics? A Case Study for Digital Free-form architecture, CAADRIA 9, Seoul, pp.519-534.
Goel, V.: 1995. Sketches of thought. Cambridge, MA: The MIT Press.
Goldberg, S. A.: 2005, Designing Continuous Complex Curved Structures to be Fabricated from Standard Flat Sheets, SIGraDi 2005, Lima – Peru, vol.1, pp.114-119.
Gross, M. D.: 1996, The Electronic Cocktail Napkin-working with design diagrams, Design Studies 17(1), pp.53-69.
Guena, F. and Untersteller L.-P.: 2006, Towards a Sketching Tool for Architects: 3D Reconstruction of Polyhedron, eCAADE 24, Volos, Greece, pp.132-135.
Hanna, S. and Mahdavi, S.: 2004, Modularity and Flexibility at the Small Scale: evolving continuous material variation with stereolithography, ACADIA 23, Cambridge, pp.76-87.
Harrop, P. H.: 2004, Agents of Risk: embedding resistance in architectural production, ACADIA 23, Cambridge, pp.66-75.
Herbert, D. B.: 1993, Architectural Study Drawings, New York, Van Nostrand Reinhold.
Igarashi, T., Matsuoka, S. and Tanaka, H.: 1999, Teddy: A sketching interface for 3D freeform design, SIGGRAPH 99, Los Angeles, CA, USA, pp.409-416.
Igarashi, T., Edwards, W. K., LaMarca, A. and Mynatt, E. D.: 2000, An Architecture for Pen-based Interaction on Electronic Whiteboards, AVI 2000, Plermo, Italy, pp.68-75.
Janke, R.: 1968, Architectural models, London.
Jung, T., Gross, M. D. and Do, E. Y.-L.: 2001, Space Pen: annotation and sketching on 3D models on the internet.
CAAD Futures 2001. Eindhoven, the Netherlands, Kluwer Academic Publishers. pp.257-270.
Kai, S. and Russell, L.: 2005, The Redefinition of Ornament: using programming and CNC manufacturing, CAAD futures 10, Vienna, Austria, pp.373-382.
Kapellos, A., Voser, M., Coignet, P. and Ebnother, I.: 2006, CNC Morphological Modelling in Landscape Architecture, eCAADe 24, Volos, Greece, pp.336-340.
Kilian, A.: 2003, Fabrication of Partially Double-Curved Surfaces out of Flat Sheet Material Through a 3D Puzzle Approach, ACADIA 22, Indianapolis, pp.75-83.
Kilian, A.: 2004, Linking Digital Hanging Chain Models to fabrication, ACADIA 23, Cambridge, pp.110-125.
Kolarevic, B.: 2001, Digital Fabrication: Manufacturing Architecture in the Information Age, ACADIA 21, Buffalo, pp.268-278.
Krawczyk, R. J.: 2002, Architectural Interpretation of Cellular Automata, Proceedings of the 5th International Conference on Generative Art, Milan, Italy, pp.7.1-7.8.
Laseau, P.: 2001, Graphic Thinking for Architects & Designers, New York, John Wiley & Sons.
Lim, C.-K.: 2003, An Insight into Freedom of Using a Pen: Pen-based System and Pen-and-paper, ACADIA 22, Indianapolis, pp.383-391.
Lim, C.-K.: 2004, A Revolution of the Design Process, CAADRIA 9, Seoul, pp.571-583.
Lim, C.-K.: 2006, Towards a Framework for Digital Design Process: In terms of CAD/CAM fabrication, CAADRIA 11, Kumamoto, pp.245-252.
Lissitzky-Kuppers, S.: 1967, El Lissitzky: Life, Letters, Texts, New York, Thames and Hudson.
Liu, Y.-T.: 1995, Some phenomena of seeing shapes in design, Design Studies Vol 16 No 3, pp.367-385.
Liu, Y. T.: 1996, Understanding Architecture in the Computer Era, Taiwan, pp.127-153.
Loukissas, Y. and Sass, L.: 2004, Rulebuilding: a generative approach to modeling architecture using 3D printers, ACADIA 23, Cambridge, pp.176-185.
Lyon, E.: 2006, Component Based Design and Digital Manufacturing: A DFM model of curved surfaces fabrication using three axis CNC router, eCAADe 24, Volos, Greece, pp.342-350.
McDonnell, K. T., Qin, H. and Wlodarczyk, R. A.: 2001, Virtual Clay: A Real-time Sculpting System with Haptic Toolkits, Proceedings of the 2001 symposium on Interactive 3D graphics, pp.179-190.
Mitchell, W.: 1998, Picture This. Build That. Harvard Design Magazine, Fall, 1998, pp.8-11.
Rappolt, M. and Violette, R.: 2004, Gehry draws, Cambridge, The MIT Press.
Robbins, E.: 1994, Why Architect’s Draw?, Cambridge, MIT Press.
Sass, L.: 2004, Design for Self Assembly of building Components using Rapid Prototyping, eCAADe 22, Copenhagen, Denmark, pp.95-104.
Schein, M.: 2002, Applied Generative Procedures in Furniture Design, Proceedings of the 5th International Conference on Generative Art, Milan, Italy, pp.21.1-21.10.
Schnabel, M. and Kwan, T.: 2004, 3D Crossover – From 3D Scanning to Digital Modelling, Rapid Prototyping and Physical Depiction, eCAADe 22, Copenhagen, Denmark, pp.304-311.
Schon, D. A. and Wiggins, G.: 1992, Kinds of seeing and their function in designing, Design Studies, Vol 13 No 2, pp.135-156.
Schumacher, P. and Fontana-Giusti, G.: 2004, Zaha Hadid Complete Works: Major and Recent Works, London, Thames and Hudson.
Schumacher, P. and Fontana-Giusti, G.: 2004, Zaha Hadid Complete Works: Process: Sketches and Drawings, London, Thames and Hudson.
Seichter, H.: 2003, Sketchand+: a Collaborative Augmented Reality Sketching Application, CAADRIA 8, Bangkok, pp.209-222.
Sliwka, R.: 2004, Untimely Fabrications, ACADIA 23, Cambridge, pp.52-65.
Smith, K. S.: 2005, Architects’ drawings: A Selection of Sketches by World Famous Architects Through History, Oxford, Architectural Press.
Suwa, M. and Tversky, B.: 1996, What Architects See in Their Sketches: Implications for Design Tools, in CHI”96 Conference Companion, Human Factors in Computing System, Vancouver, pp.191-192.
Suwa, M., Tversky, B., Gero, J. and Purcell, T.: 2001, Seeing Into Sketches: Regrouping Parts Encourages New Interpretations, Visual and Spatial Reasoning in Design II, Sydney, pp.207-219.
Thomsen, C.W.: 1994, Visionary Architecture: From Babylon to Virtual Reality, Munich, Prestel-Verlag.
Van Elsas, P. and Vergeest, J.: 1998, New functionality for computer-aided conceptual design: the displacement feature, Design Studies Vol 19 No 1, pp.81-102.
Wesche, G. and Seidel, H.-P.: 2001, FreeDrawer-A Free-Form Sketching System on the Responsive Workbench, Proceedings of the ACM symposium on Virtual reality software and technology, Banff, Alberta, Canada, pp.167-174.
Won, P.-H.:2001, The comparison between visual thinking using computer and conventional media in the concept generation stages of design, Automation in Construction 10 (3) (2001) pp.319-325.