第七章 結論與未來研究方向
7.2 未來研究方向
本文針對晶圓製造廠於非穩態環境下構建產品組合之訂定，綜合研究期 間之各項成果與心得，吾人認為有幾點可再深入探討，茲列如下：
1. 由於產品族比例設計之時，未以區間方式來考量，只是點集合，應該可 以擴大考量，將所有產品組合都納入考量，讓產品組合更加完善。
2. 由於在考量不同之瓶頸利用率情況時，並未考慮兩利用率變換時對系統 所帶來之之影響，是以如能多加考量此因素，將可以更能瞭解在擴大接 單時，在不致影響原有產品之生產績效下，最多能接收多少訂單。
3. 由於區間分割份數多寡，將影響本機制之成效，然而本文尚未探究切割 份數之合理份數，使本機制能更周延的訂定產品組合。
參考文獻
[1] Ball, E., Färe, R., Grosskopf, S. and Zaim, O., 2005, “Accounting for externalities in the measurement of productivity groth the Malmquist cost productivity measure,” Structural Change and Economic Dynamics, Vol.16, 374-394.
[2] Banker, R. D., Charnes, A. and Cooper, W. W., 1984, “Some models for estimating technical and scale inefficiency in data envelopment analysis,”
Management Science, Vol. 30(9), 1078-1092.
[3] Barros, C. P. and Alves, C., 2004, “An empirical analysis of productivity growth in a portuguese retail chain using Malmquist productivity index,” Journal of Retailing and Consumer Services, Vol. 11, 269-278.
[4] Buxey, G., 1989, “Production scheduling: practice and theory,” European Journal of Operation Research, Vol. 39, 17-31.
[5] Caves, D. W., Christensen, L. R. and Diewert, W. E., 1982, “The economic theory of index numbers and the measurement of input, output and productivity,” Econometrica, Vol 50, 1393-1414.
[6] Chen, Y. and Ali, A. I., 2004, “DEA Malmquist productivity measure new insights with an application to computer industry,” European Journal of Operational Research, Vol. 159, pp. 239-249.
[7] Chen, Y., 2003, “A non-radial Malmquist productivity index with an illustrative application to chinese major industries,”International Journal of Production Economics, Vol. 83, 27-35.
[8] Chou, Y. C. and Hong, I. H., 2000, “A methodology for product mix planning in semiconductor foundry manufacturing,” IEEE Transactions on Semiconductor Manufacturing, Vol. 13(3), 278-285.
[9] Chung, S. H. and Huang, H. W., “Cycle time estimation for wafer fab with engineering lots,” IIE Transaction on Scheduling and Logistics, to appear.
[10] Chung, S. H., Lee, H. I., and Peam, W. L., 2005, “Analytic network process (ANP) approach for product mix planning in semiconductor fabricator,”
International Journal of Production Economics, Vol. 96, 15-36.
[11] Chung, S. H., and Lee, H. I., Lai, C. W., and Tseng, W. X., 2005, “A DEA window analysis on the product family mix selection for a semiconductor fabricator,” Working Paper.
[12] Chung, S. H., Yang, M. H. and Cheng, C. M., “The design of due-date assignment model and the determination of flow time control parameters for the wafer fabrication factories,” IEEE Transaction on Components, Packaging, and Manufacturing Technology, Vol. 20(4), 278-287, 1997.
[13] Charnes, A., Cooper, W. W. and Rhodes, W., 1978, “Measuring the efficiency of decision making units,” European Journal of Operational Research, Vol. 2, 429-444.
[14] Cooper, W. W., Park, K. S., and Yu, G., 1999, “IDEA and AR-IDEA for dealing with imprecise data in DEA,” Management Science, Vol. 45(4), 597-607.
[15] Despotis, D. K., Smirlis Y. G., 2002, “Data envelopment analysis with imprecise data,” European Journal of Operational Research, Vol. 140, 24–36.
[16] Dettmer, H. W., 1998, “Breaking the constraints to world-class performance,”
Milwukee, MI: ASQ Quality Press.
[17] Entani, T., Maeda, Y., and Tanaka, H., 2002, “Dual models of interval DEA and its extension to interval data,” European Journal of Operational Research, Vol.
136, 32-45.
[18] Estache, A., de la Fé, B. T. and Trujillo, L., 2004, “Sources of efficiency gains in port reform a DEA decomposition of a Malmquist TFP index for Mexico,”
Utilities Policy, Vol. 12, 221-230.
[19] Färe, R., Grosskopf, S., Lindgren, B. and Roos, P., “Productivity changes in swedish pharmacies 1980-1989: A non-parametric Malmquist approach,”
Journal of Productivity Analysis, Vol. 3, 85-101, 1992.
Cambridge University Press, P. 232.
[21] Farrell, M. J., 1957, “The measurement of productive efficiency,” Journal of the Royal Statistical Society, Series A, General, Vol. 120(3), 253-281.
[22] Fredendall, L. D. and Lea, B. R. 1997, “improving the product mix heuristic in the theory of constraints,” International Journal of Production Research, Vol.
35(6), 1535-1544.
[23] Goldratt, E. M., 1990, “The haystack syndrome: sifting information from the data ocean,” Croton-on-Hudson, Great Barrington, MA: North River Press.
[24] Goldratt, E. M., 1990, “What is this called the theory of constraints and how should it be implemented?” Croton-on-Hudson, Great Barrington, MA: North River Press.
[25] Haghighat, M. S., and Khorram, E., 2005, “The maximum and minimum number of efficient units in DEA with interval data,” Applied Mathematics and Computation, Vol. 163, 919 – 930.
[26] Hseu, J. S. and Shang, J. K., 2005, “Productivity changes of pulp and paper industry in OECD countries, 1991-2000 a non-parametric Malmquist approach,” Forest Policy and Economics, Vol. 7, 411-422.
[27] Hung, Y. F. and Leachman, R. C., “A production planning methodology for semiconductor manufacturing based on interactive simulation and linear programming calculations,” IEEE Transactions on Semiconductor Manufacturing, Vol. 9(2), 257-269, 1996.
[28] Jahanshahloo, G. R., Hosseinzadeh Lofti, F., and Bagherzadeh Valami, H., 2006, ”Malmquist Productivity Index with interval and fuzzy data,”
International Mathematical Forum, Vol. 33, 1607-1623.
[29] Jahanshahloo, G. R., Hosseinzadeh Lofti, F., and Moradi, M., 2004, “Sensitivity and stability analysis in DEA with interval data,” Applied Methoematics and Computation, Vol. 156, 463-477.
[30] Jahanshahloo, G. R., Matin, R. K., and Vencheh, A. H., 2004, “On return to scale of fully efficient DMUs in data envelopment analysis under interval data,” Vol.
154, 31-40.
[31] Kao, C. and Liu, S. T., 2000, “Fuzzy efficiency measures in Data envelopment analysis,” Fuzzy Sets and Systems, Vol. 113, 427-437.
[32] Kasilingam, R.G., 1995, “Product mix determination in the presence of alternate process plans and stochastic demand,” Computers Industry Engineering, Vol.
29(1), 249-253.
[33] Kim, S. H., Park, C. G., and Park, K. S., 1999, “An application of data envelopment analysis in telephone offices evaluation with partial data.
Computers & Operation Research, Vol. 26, 59-72.
[34] Kuroda, M. and Kawada, A., 1995, “Adaptive input control for job-shop type production systems with varying demands using inverse queuing network analysis,” International Journal of Production Economics, Vol. 41, 217-255.
[35] Lee, T. N. and Plenert ,G.., 1993, “Optimizing theory of constraints when new product alternatives exist,” Production and Inventory Management Journal, Vol.
34(3), 51-57.
[36] Lozano-Vivas, A. and Humphrey, D. B., 2002, “Bias in Malmquist index and cost function productivity measurement in banking,” International Journal of Production Economics, Vol. 76, 177-188.
[37] Malmquist, S., 1953, “Index numbers and indifference surfaces,” Trabajos de Estatistica, Vol. 4, 209-242.
[38] Maniadakis, N. and Thanassoulis, E., 2004, “A cost Malmquist productivity index,” European Journal of Operational Research, Vol. 154, 396-409.
[39] Odeck, J., 2005, “Identifying traffic safety best practice an application of DEA and Malmquist indices,” OMEGA: the International Journal of Management Service, Vol. 34, 28-40.
[40] Plenert, G., 1993, “Optimized theory of constraints when multiple constrained resources exist,” European Journal of Operational Research, Vol. 70, 126-133.
[41] Posnack, A. J., 1994, “Theory of constraints: improper applications yield improper conclusions,” Production and Inventory Management Journal, Vol.
[42] Shephard, R. W., 1970, “Theory of Cost and Production Functions”, Princeton University Press, Princeton, NJ.
[43] Sueyoshi, T. and Aoki, S., 2001, “A use of a nonparametric statistic for DEA frontier shift: The Kruskal and Wallis rank test,” OMEGA: International Journal of Management Science, Vol. 29, 1-18.
[44] Sueyoshi, T. and Goto, M. S., 2001, “Slack-adjusted DEA for time series analysis: performance measurement of Japanese electric power generation industry in 1984-1993,” European Journal of Operation Research, Vol 133, 232-259.
[45] Teskouras, K. D., Pantzios, C. J. and Karagiannis, G., 2004, “Malmquist productivity index estimation with zero-value variable: The case of Greek prefectural training councils,” International Journal of Production Economics, Vol. 89, 95-106.
[46] Wang, Y. M., Greatbanks, R.,and Yang, J. B. 2005, “Interval efficiency assessument using data envelopment analysis,” Fuzzy sets and systems, Vol. 153, 347-370.
[47] Witte, J. D., 1996, “Using static capacity modeling techniques in semiconductor manufacturing,” IEEE/SEMI Advantaged Semiconductor Manufacturing Conference, FL 32907, 31-35.
[48] Yamada, Y., Matui, T., and Sugiyama, M., 1993, ”New analysis of efficiency based on DEA,” Journal of the Operations Research Society of Janpan, Vol.
37(2), 158-167(in Janpaness).
[49] Yamada, Y., Sugiyama, T., and Sugiyama, M., 1995, ”The DEA method for Janpanese management: the evaluation of local governmental investments to the Janpanese economy,” Journal of the Operations Research Society of Janpan, Vol.
38(4), 381-397(in Janpaness).
[50] Yoruk, B. K. and Zaim, O., 2005 “Productivity growth in DECD countries A comparison with Malmquist indices,” Journal of Comparative Economics, Vol.
33, 401-420.
[51] Zhu, J., 2003, “Imprecise data envelopment analysis (IDEA): a review and improvement with an application,” European Journal of Operation Research, Vol. 144, 513-529.
[52] 李國禎，「晶圓製造廠生產規劃模式之構建」，國立交通大學工業工程與管 理學系，碩士論文，民國 84 年。
[53] 李幸娥，「晶圓製造廠非穏態環境下之生產排程規劃」，國立交通大學工業 工程與管理學系，碩士論文，民國 91 年。
[54] 李欣怡，「晶圓製造廠產品組合最佳化之設定」，國立交通大學工業工程與 管理學系，博士論文，民國 93 年。
[55] 洪建國，「運用負荷導向理念構建晶圓製造廠之細部生產排程規劃模式」，
國立交通大學工業工程與管理學系，碩士論文，民國 85 年。
[56] 梁勝銓，「晶圓製造廠產品組合與機器利用率模式之構建」，國立交通大學 工業工程與管理學系，碩士論文，民國 87 年。
[57] 張毓誠，「晶圓製造廠主生產排程之構建」，國立交通大學工業工程與管理 學系，碩士論文，民國 86 年。
[58] 馮堯欽，「晶圓製造廠產品組合、機器利用率與系統平均在製品存貨水準模 式之構建－考慮隨機模式」，國立交通大學工業工程與管理學系，碩士論 文，民國 87 年。
附錄 A 產品別製程資料
附表 A-1 產品 A 之加工步驟與作業時間（節錄） （單位：分）
產品 A 產品 A
步驟 工作站 加工時間 PS 步驟 工作站 加工時間 PS 1~4 － 19 － 235~238 － 96 －
5 W24 346 CCR 239 W18 96 Metal 6 － 3 － 240~253 － 240 －
7 W46 42 BN 254 W46 42 BN 8~17 － 168 － 255~274 － 388 －
18 W24 346 CCR 275 W46 42 BN 19~23 － 355 － 276~279 － 96 －
24 W46 17 BN 280 W18 96 Metal 25~39 － 484 － 281~287 － 93 －
40 W24 346 CCR 288 W46 42 BN 41~54 － 805 － 289~298 － 423 －
55 W24 346 CCR 299 W46 42 BN 56 － 3 － 300~305 － 461 －
57 W46 42 BN
58~66 － 219 －
67 W46 42 BN
68~83 － 601 －
84 W29 346 Poly 85~90 － 286 －
91 W46 17 BN
92~107 － 410 －
108 W46 42 BN
109~120 － 477 －
121 W46 42 BN
125~127 － 134 －
128 W46 42 BN
129~134 － 134 －
135 W46 42 BN
136~165 － 1479 －
166 W46 17 BN
167~191 － 447 －
192 W46 42 BN
193~196 － 96 －
197 W18 96 Metal 198~210 － 232 －
211 W46 42 BN
212~233 － 402 － 234 W46 42 BN
附表 A-2 產品 B 之加工步驟與作業時間（節錄） （單位：分）
產品 B 產品 B
步驟 工作站 加工時 間
PS 步驟 工作站 加工時 間
PS 1~4 － 19 － 235~238 － 96 －
5 W24 346 CCR 239 W18 96 Metal 6 － 3 － 240~253 － 240 －
7 W46 42 BN 254 W46 42 BN 8~17 － 168 － 255~274 － 388 －
18 W24 346 CCR 275 W46 42 BN 19~23 － 355 － 276~279 － 96 －
24 W46 17 BN 280 W18 96 Metal 25~39 － 484 － 281~294 － 263 －
40 W24 346 CCR 295 W46 42 BN 41~54 － 805 － 296~315 － 388 －
55 W24 346 CCR 316 W46 42 BN 56 － 3 － 317~320 － 96 －
57 W46 42 BN 321 W18 96 Metal 58~66 － 219 － 322~327 － 66 －
67 W46 42 BN 328 W46 42 BN 68~83 － 601 － 329~338 － 423 －
84 W29 346 Poly 339 W46 42 BN 85~90 － 286 － 340~345 － 461 －
91 W46 17 BN
92~107 － 410 －
108 W46 42 BN
109~120 － 477 －
121 W46 42 BN
125~127 － 134 －
128 W46 42 BN
129~134 － 134 －
135 W46 42 BN
136~165 － 1479 －
166 W46 17 BN
167~191 － 447 －
192 W46 42 BN
193~196 － 96 －
197 W18 96 Metal
198~210 － 232 －
211 W46 42 BN
212~233 － 402 －
234 W46 42 BN
附表 A-3 產品 C 之加工步驟與作業時間（節錄） （單位：分）
產品 C 產品 C
步驟 工作站 加工時 間
PS 步驟 工作站 加工時 間
PS 1~4 － 19 － 214~227 － 378 － 5 W24 346 CCR 228 W46 42 BN 6 － 3 － 229~246 － 525 － 7 W46 42 BN 247 W46 42 BN 8~17 － 168 － 248~251 － 96 －
18 W24 346 CCR 252 W18 96 Metal 19~23 － 355 － 253~258 － 67 －
24 W46 17 BN 259 W46 42 BN 25~39 － 484 － 260~269 － 423 －
40 W24 346 CCR 270 W46 42 BN 41~53 － 793 － 271~276 － 461 －
54 W46 42 BN
55~60 － 95 －
61 W46 42 BN
62~71 － 619 －
72 W24 346 CCR
73~75 － 27 －
76 W46 42 BN
77~89 － 451 －
90 W29 346 Poly
91~101 － 158 －
102 W29 346 Poly
103~112 － 359 －
113 W46 17 BN
114~129 － 410 －
130 W46 42 BN
131~142 － 477 －
143 W46 42 BN
144~149 － 134 －
150 W46 42 BN
151~172 － 1125 －
173 W46 17 BN
174~185 － 199 －
186 W46 42 BN
187~207 － 440 －
208 W46 42 BN
209~212 － 96 －
213 W18 96 Metal
附表 A-4 產品 D 之加工步驟與作業時間（節錄） （單位：分）
產品 D 產品 D
步驟 工作站 加工時 間
PS 步驟 工作站 加工時 間
PS 1~4 － 19 － 194~203 － 139 － 5 W24 346 CCR 204 W46 42 BN 6 － 3 － 205~226 － 1125 － 7 W46 42 BN 227 W46 17 BN 8~17 － 168 － 228~239 － 199 －
18 W24 346 CCR 240 W46 42 BN 19~23 － 355 － 241~261 － 440 －
24 W46 17 BN 262 W46 42 BN 25~39 － 484 － 263~266 － 96 －
40 W24 346 CCR 267 W18 96 Metal 41~53 － 793 － 268~281 － 378 －
54 W46 42 BN 282 W46 42 BN 55~61 － 107 － 283~300 － 525 －
62 W46 42 BN 301 W46 42 BN 63~72 － 619 － 302~305 － 96 －
73 W24 346 CCR 306 W18 96 Metal 74~76 － 27 － 307~312 － 67 －
77 W46 42 BN 313 W46 42 BN 78~90 － 451 － 314~323 － 423 －
91 W29 346 Poly 324 W46 42 BN 92~101 － 148 － 325~330 － 461 －
102 W46 17 BN
103~112 － 171 －
113 W46 17 BN
114~123 － 359 －
124 W46 17 BN
125~140 － 410 －
141 W46 42 BN
142~153 － 477 －
154 W46 42 BN
155~160 － 134 －
161 W46 42 BN
162~174 － 753 －
175 W46 17 BN
176~189 － 163 －
190 W29 346 Poly
191~192 － 80 －
193 W46 17 BN
附表 A-5 產品 E 之加工步驟與作業時間（節錄） （單位：分）
產品 E 產品 E
步驟 工作站 加工時 間
PS 步驟 工作站 加工時 間
PS 1~4 － 19 － 193~214 － 1125 － 5 W24 346 CCR 215 W46 17 BN 6 － 3 － 216~227 － 199 － 7 W46 42 BN 228 W46 42 BN 8~17 － 168 － 229~249 － 440 －
18 W24 346 CCR 250 W46 42 BN 19~23 － 355 － 251~254 － 96 －
24 W46 17 BN 255 W18 96 Metal 25~39 － 484 － 256~269 － 378 －
40 W24 346 CCR 270 W46 42 BN 41~53 － 793 － 271~288 － 525 －
54 W46 42 BN 289 W46 42 BN 55~60 － 95 － 290~293 － 96 －
61 W46 42 BN 294 W18 96 Metal 62~71 － 619 － 295~300 － 67 －
72 W24 346 CCR 301 W46 42 BN 73~75 － 27 － 302~311 － 423 －
76 W46 42 BN 312 W46 42 BN 77~90 － 451 － 313~318 － 461 －
91 W29 346 Poly
92~101 － 158 －
102 W29 346 Poly
103~112 － 359 －
113 W46 17 BN
114~129 － 410 －
130 W46 42 BN
131~142 － 477 －
143 W46 42 BN
144~149 － 134 －
150 W46 42 BN
151~163 － 753 －
164 W46 17 BN
165~178 － 163 －
179 W29 346 Poly
180 － 3 －
181 W46 17 BN
182~191 － 139 －
192 W46 42 BN
附錄 B 工作站相關資料
附表 B-6 各工作站相關資料
工作站編號 W01 W02 W03 W04 W05 W06 W07 W08 W09 W10 加工批量 1 1 1 1 1 1 2 2 1 1
機台數 3 3 1 2 1 2 7 3 3 1
MTBF（hr） 200 200 – – – – 300 300 200 250 MTTR（hr） 4 4 – – – – 8 8 4 4 MTBPM（hr） 716 716 – – – – 240 600 – 330
MTPM（hr） 4 4 – – – – 1 1 – 2 工作站編號 W11 W12 W13 W14 W15 W16 W17 W18 W19 W20
加工批量 1 1 2 2 2 1 1 1 1 1
機台數 2 5 3 2 2 2 1 8 2 2
MTBF（hr） 250 250 200 200 – – – 150 200 500 MTTR（hr） 4 6 4 4 – – – 4 4 4 MTBPM（hr） 130 66 60 120 – – – 60 – 168
MTPM（hr） 2 6 6 6 – – – 6 – 0.5 工作站編號 W21 W22 W23 W24 W25 W26 W27 W28 W29 W30
加工批量 1 1 1 6 6 6 6 6 6 6
機台數 1 2 2 6 3 2 4 5 3 5
MTBF（hr） 500 500 450 500 500 500 500 108.6 338.3 165.8 MTTR（hr） 4 4 6 8 8 8 8 12.2 5.8 6.6 MTBPM（hr） 168 168 2160 4320 4320 4320 4320 480 480 488
MTPM（hr） 0.5 0.5 3 72 72 72 72 24 24 24 工作站編號 W31 W32 W33 W34 W35 W36 W37 W38 W39 W40
加工批量 6 6 6 6 6 6 1 4 4 4
機台數 3 2 3 3 2 2 5 3 2 2
MTBF（hr） 500 61.4 500 500 500 500 – 70 70 70 MTTR（hr） 8 7.9 8 8 8 8 – 5 5 6 MTBPM（hr） 4320 4320 4320 4320 720 4320 – 168 168 168
MTPM（hr） 72 72 72 72 24 72 – 8 8 8 工作站編號 W41 W42 W43 W44 W45 W46 W47 W48 W49 W50
加工批量 1 1 1 1 1 1 2 2 1 1 機台數 4 2 1 15 2 13 3 3 2 1 MTBF（hr） 168 – – 300 – 24 1000 1000 70 70 MTTR（hr） 8 – – 3 – 1.5 2 2 2 2 MTBPM（hr） 120 – – 717 – 163 1000 1000 162 162
MTPM（hr） 6 – – 3 – 5 0.3 0.3 4 4
附表B-6 各工作站相關資料(續)
工作站編號 W51 W52 W53 W54 W55 W56 W57 W58 W59 W60 加工批量 1 1 1 1 1 1 1 1 1 1
機台數 2 3 1 3 4 2 3 4 3 2
MTBF（hr） 70 100 100 100 100 150 150 400 100 100 MTTR（hr） 3 4 4 5 5 5 5 8 5 5 MTBPM（hr） 168 716 716 96 96 166 166 710 336 168
MTPM（hr） 4 4 4 8 8 2 2 10 12 8 工作站編號 W61 W62 W63 W64 W65 W66 W67 W68 W69 W70
加工批量 1 1 1 1 1 1 2 2 2 2
機台數 1 3 2 8 2 1 1 1 1 2
MTBF（hr） 100 250 250 105 250 – 1400 1400 1400 1400 MTTR（hr） 8 4 12 10 12 – 5.5 5.5 5.5 5.5 MTBPM（hr） 20 150 180 10 1600 – 2160 2160 2160 2160
MTPM（hr） 5 6 7 1.5 8.5 – 4 4 4 4 工作站編號 W71 W72 W73 W74 W75 W76 W77 W78 W79 W80
加工批量 2 2 2 2 2 2 2 1 1 1
機台數 2 2 2 1 1 1 1 2 2 1
MTBF（hr） 1400 1400 1400 1400 1400 1400 1400 400 400 – MTTR（hr） 5.5 5.5 5.5 5.5 5.5 5.5 5.5 8 8 – MTBPM（hr） 2160 2160 2160 2160 2160 2160 2160 710 710 –
MTPM（hr） 4 4 4 4 4 4 4 10 10 – 工作站編號 W81 W82 W83
加工批量 2 1 1 機台數 1 4 1
MTBF（hr） – – –
MTTR（hr） – – –
MTBPM（hr） – – –
MTPM（hr） – – –
附錄 C 產品族/優先權組合
附表 C- 1 產品族/優先權組合集合
e g c 產品族/優先權組合PFPRe,g,c
=1
e g=1 c=1 (0.1, 0.9) ([ 0 ,0.01],[ 0.1 ,0.11],[0.88, 0.9])
=1
e g=1 c=2 (0.1, 0.9) ([ 0 ,0.01],[0.11,0.12],[0.87,0.89])
=1
e g=1 c=3 (0.1, 0.9) ([ 0 ,0.01],[0.12,0.13],[0.86,0.88])
=1
e g=1 c=4 (0.1, 0.9) ([ 0 ,0.01],[0.13,0.14],[0.85,0.87])
=1
e g=1 c=5 (0.1, 0.9) ([ 0 ,0.01],[0.14,0.15],[0.84,0.86])
=1
e g =2 c=1 (0.1, 0.9) ([0.01,0.02],[ 0.1 ,0.11],[0.87,0.89])
=1
e g =2 c=2 (0.1, 0.9) ([0.01,0.02],[0.11,0.12],[0.86,0.88])
=1
e g =2 c=3 (0.1, 0.9) ([0.01,0.02],[0.12,0.13],[0.85,0.87])
=1
e g =2 c=4 (0.1, 0.9) ([0.01,0.02],[0.13,0.14],[0.84,0.86])
=1
e g =2 c=5 (0.1, 0.9) ([0.01,0.02],[0.14,0.15],[0.83,0.85])
=1
e g =3 c=1 (0.1, 0.9) ([0.02,0.03],[ 0.1 ,0.11],[0.86,0.88])
=1
e g =3 c=2 (0.1, 0.9) ([0.02,0.03],[0.11,0.12],[0.85,0.87])
=1
e g =3 c=3 (0.1, 0.9) ([0.02,0.03],[0.12,0.13],[0.84,0.86])
=1
e g =3 c=4 (0.1, 0.9) ([0.02,0.03],[0.13,0.14],[0.83,0.85])
=1
e g =3 c=5 (0.1, 0.9) ([0.02,0.03],[0.14,0.15],[0.82,0.84])
=1
e g =4 c=1 (0.1, 0.9) ([0.03,0.04],[ 0.1 ,0.11],[0.85,0.87])
=1
e g =4 c=2 (0.1, 0.9) ([0.03,0.04],[0.11,0.12],[0.84,0.86])
=1
e g =4 c=3 (0.1, 0.9) ([0.03,0.04],[0.12,0.13],[0.83,0.85])
=1
e g =4 c=4 (0.1, 0.9) ([0.03,0.04],[0.13,0.14],[0.82,0.84])
=1
e g =4 c=5 (0.1, 0.9) ([0.03,0.04],[0.14,0.15],[0.81,0.83])
=1
e g =5 c=1 (0.1, 0.9) ([0.04,0.05],[ 0.1 ,0.11],[0.84,0.86])
=1
e g =5 c=2 (0.1, 0.9) ([0.04,0.05],[0.11,0.12],[0.83,0.85])
=1
e g =5 c=3 (0.1, 0.9) ([0.04,0.05],[0.12,0.13],[0.82,0.84])
=1
e g =5 c=4 (0.1, 0.9) ([0.04,0.05],[0.13,0.14],[0.81,0.83])
=1
e g =5 c=5 (0.1, 0.9) ([0.04,0.05],[0.14,0.15],[ 0.8 ,0.82])
=2
e g=1 c=1 (0.2, 0.8) ([ 0 ,0.01],[ 0.1 ,0.11],[0.88, 0.9])
=2
e g=1 c=2 (0.2, 0.8) ([ 0 ,0.01],[0.11,0.12],[0.87,0.89])
=2
e g=1 c=3 (0.2, 0.8) ([ 0 ,0.01],[0.12,0.13],[0.86,0.88])
=2
e g=1 c=4 (0.2, 0.8) ([ 0 ,0.01],[0.13,0.14],[0.85,0.87])
=2
e g=1 c=5 (0.2, 0.8) ([ 0 ,0.01],[0.14,0.15],[0.84,0.86])
=2
e g =2 c=1 (0.2, 0.8) ([0.01,0.02],[ 0.1 ,0.11],[0.87,0.89])
=2
e g =2 c=2 (0.2, 0.8) ([0.01,0.02],[0.11,0.12],[0.86,0.88])
=2
e g =2 c=3 (0.2, 0.8) ([0.01,0.02],[0.12,0.13],[0.85,0.87])
=2
e g =2 c=4 (0.2, 0.8) ([0.01,0.02],[0.13,0.14],[0.84,0.86])
=2
e g =2 c=5 (0.2, 0.8) ([0.01,0.02],[0.14,0.15],[0.83,0.85])
=2
e g =3 c=1 (0.2, 0.8) ([0.02,0.03],[ 0.1 ,0.11],[0.86,0.88])
=2
e g =3 c=2 (0.2, 0.8) ([0.02,0.03],[0.11,0.12],[0.85,0.87])
附表 C- 1 產品族/優先權組合集合（續）
e g c 產品族/優先權組合PFPRe,g,c
=2
e g =3 c=3 (0.2, 0.8) ([0.02,0.03],[0.12,0.13],[0.84,0.86])
=2
e g =3 c=4 (0.2, 0.8) ([0.02,0.03],[0.13,0.14],[0.83,0.85])
=2
e g =3 c=5 (0.2, 0.8) ([0.02,0.03],[0.14,0.15],[0.82,0.84])
=2
e g =4 c=1 (0.2, 0.8) ([0.03,0.04],[ 0.1 ,0.11],[0.85,0.87])
=2
e g =4 c=2 (0.2, 0.8) ([0.03,0.04],[0.11,0.12],[0.84,0.86])
=2
e g =4 c=3 (0.2, 0.8) ([0.03,0.04],[0.12,0.13],[0.83,0.85])
=2
e g =4 c=4 (0.2, 0.8) ([0.03,0.04],[0.13,0.14],[0.82,0.84])
=2
e g =4 c=5 (0.2, 0.8) ([0.03,0.04],[0.14,0.15],[0.81,0.83])
=2
e g =5 c=1 (0.2, 0.8) ([0.04,0.05],[ 0.1 ,0.11],[0.84,0.86])
=2
e g =5 c=2 (0.2, 0.8) ([0.04,0.05],[0.11,0.12],[0.83,0.85])
=2
e g =5 c=3 (0.2, 0.8) ([0.04,0.05],[0.12,0.13],[0.82,0.84])
=2
e g =5 c=4 (0.2, 0.8) ([0.04,0.05],[0.13,0.14],[0.81,0.83])
=2
e g =5 c=5 (0.2, 0.8) ([0.04,0.05],[0.14,0.15],[ 0.8 ,0.82])
=3
e g=1 c=1 (0.3, 0.7) ([ 0 ,0.01],[ 0.1 ,0.11],[0.88, 0.9])
=3
e g=1 c=2 (0.3, 0.7) ([ 0 ,0.01],[0.11,0.12],[0.87,0.89])
=3
e g=1 c=3 (0.3, 0.7) ([ 0 ,0.01],[0.12,0.13],[0.86,0.88])
=3
e g=1 c=4 (0.3, 0.7) ([ 0 ,0.01],[0.13,0.14],[0.85,0.87])
=3
e g=1 c=5 (0.3, 0.7) ([ 0 ,0.01],[0.14,0.15],[0.84,0.86])
=3
e g =2 c=1 (0.3, 0.7) ([0.01,0.02],[ 0.1 ,0.11],[0.87,0.89])
=3
e g =2 c=2 (0.3, 0.7) ([0.01,0.02],[0.11,0.12],[0.86,0.88])
=3
e g =2 c=3 (0.3, 0.7) ([0.01,0.02],[0.12,0.13],[0.85,0.87])
=3
e g =2 c=4 (0.3, 0.7) ([0.01,0.02],[0.13,0.14],[0.84,0.86])
=3
e g =2 c=5 (0.3, 0.7) ([0.01,0.02],[0.14,0.15],[0.83,0.85])
=3
e g =3 c=1 (0.3, 0.7) ([0.02,0.03],[ 0.1 ,0.11],[0.86,0.88])
=3
e g =3 c=2 (0.3, 0.7) ([0.02,0.03],[0.11,0.12],[0.85,0.87])
=3
e g =3 c=3 (0.3, 0.7) ([0.02,0.03],[0.12,0.13],[0.84,0.86])
=3
e g =3 c=4 (0.3, 0.7) ([0.02,0.03],[0.13,0.14],[0.83,0.85])
=3
e g =3 c=5 (0.3, 0.7) ([0.02,0.03],[0.14,0.15],[0.82,0.84])
=3
e g =4 c=1 (0.3, 0.7) ([0.03,0.04],[ 0.1 ,0.11],[0.85,0.87])
=3
e g =4 c=2 (0.3, 0.7) ([0.03,0.04],[0.11,0.12],[0.84,0.86])
=3
e g =4 c=3 (0.3, 0.7) ([0.03,0.04],[0.12,0.13],[0.83,0.85])
=3
e g =4 c=4 (0.3, 0.7) ([0.03,0.04],[0.13,0.14],[0.82,0.84])
=3
e g =4 c=5 (0.3, 0.7) ([0.03,0.04],[0.14,0.15],[0.81,0.83])
=3
e g =5 c=1 (0.3, 0.7) ([0.04,0.05],[ 0.1 ,0.11],[0.84,0.86])
=3
e g =5 c=2 (0.3, 0.7) ([0.04,0.05],[0.11,0.12],[0.83,0.85])
=3
e g =5 c=3 (0.3, 0.7) ([0.04,0.05],[0.12,0.13],[0.82,0.84])
=3
e g =5 c=4 (0.3, 0.7) ([0.04,0.05],[0.13,0.14],[0.81,0.83])
=3
e g =5 c=5 (0.3, 0.7) ([0.04,0.05],[0.14,0.15],[ 0.8 ,0.82])
=4
e g=1 c=1 (0.4, 0.6) ([ 0 ,0.01],[ 0.1 ,0.11],[0.88, 0.9])
附表 C- 1 產品族/優先權組合集合（續）
e g c 產品族/優先權組合PFPRe,g,c
=4
e g=1 c=2 (0.4, 0.6) ([ 0 ,0.01],[0.11,0.12],[0.87,0.89])
=4
e g=1 c=3 (0.4, 0.6) ([ 0 ,0.01],[0.12,0.13],[0.86,0.88])
=4
e g=1 c=4 (0.4, 0.6) ([ 0 ,0.01],[0.13,0.14],[0.85,0.87])
=4
e g=1 c=5 (0.4, 0.6) ([ 0 ,0.01],[0.14,0.15],[0.84,0.86])
=4
e g =2 c=1 (0.4, 0.6) ([0.01,0.02],[ 0.1 ,0.11],[0.87,0.89])
=4
e g =2 c=2 (0.4, 0.6) ([0.01,0.02],[0.11,0.12],[0.86,0.88])
=4
e g =2 c=3 (0.4, 0.6) ([0.01,0.02],[0.12,0.13],[0.85,0.87])
=4
e g =2 c=4 (0.4, 0.6) ([0.01,0.02],[0.13,0.14],[0.84,0.86])
=4
e g =2 c=5 (0.4, 0.6) ([0.01,0.02],[0.14,0.15],[0.83,0.85])
=4
e g =3 c=1 (0.4, 0.6) ([0.02,0.03],[ 0.1 ,0.11],[0.86,0.88])
=4
e g =3 c=2 (0.4, 0.6) ([0.02,0.03],[0.11,0.12],[0.85,0.87])
=4
e g =3 c=3 (0.4, 0.6) ([0.02,0.03],[0.12,0.13],[0.84,0.86])
=4
e g =3 c=4 (0.4, 0.6) ([0.02,0.03],[0.13,0.14],[0.83,0.85])
=4
e g =3 c=5 (0.4, 0.6) ([0.02,0.03],[0.14,0.15],[0.82,0.84])
=4
e g =4 c=1 (0.4, 0.6) ([0.03,0.04],[ 0.1 ,0.11],[0.85,0.87])
=4
e g =4 c=2 (0.4, 0.6) ([0.03,0.04],[0.11,0.12],[0.84,0.86])
=4
e g =4 c=3 (0.4, 0.6) ([0.03,0.04],[0.12,0.13],[0.83,0.85])
=4
e g =4 c=4 (0.4, 0.6) ([0.03,0.04],[0.13,0.14],[0.82,0.84])
=4
e g =4 c=5 (0.4, 0.6) ([0.03,0.04],[0.14,0.15],[0.81,0.83])
=4
e g =5 c=1 (0.4, 0.6) ([0.04,0.05],[ 0.1 ,0.11],[0.84,0.86])
=4
e g =5 c=2 (0.4, 0.6) ([0.04,0.05],[0.11,0.12],[0.83,0.85])
=4
e g =5 c=3 (0.4, 0.6) ([0.04,0.05],[0.12,0.13],[0.82,0.84])
=4
e g =5 c=4 (0.4, 0.6) ([0.04,0.05],[0.13,0.14],[0.81,0.83])
=4
e g =5 c=5 (0.4, 0.6) ([0.04,0.05],[0.14,0.15],[ 0.8 ,0.82])
=5
e g=1 c=1 (0.5, 0.5) ([ 0 ,0.01],[ 0.1 ,0.11],[0.88, 0.9])
=5
e g=1 c=2 (0.5, 0.5) ([ 0 ,0.01],[0.11,0.12],[0.87,0.89])
=5
e g=1 c=3 (0.5, 0.5) ([ 0 ,0.01],[0.12,0.13],[0.86,0.88])
=5
e g=1 c=4 (0.5, 0.5) ([ 0 ,0.01],[0.13,0.14],[0.85,0.87])
=5
e g=1 c=5 (0.5, 0.5) ([ 0 ,0.01],[0.14,0.15],[0.84,0.86])
=5
e g =2 c=1 (0.5, 0.5) ([0.01,0.02],[ 0.1 ,0.11],[0.87,0.89])
=5
e g =2 c=2 (0.5, 0.5) ([0.01,0.02],[0.11,0.12],[0.86,0.88])
=5
e g =2 c=3 (0.5, 0.5) ([0.01,0.02],[0.12,0.13],[0.85,0.87])
=5
e g =2 c=4 (0.5, 0.5) ([0.01,0.02],[0.13,0.14],[0.84,0.86])
=5
e g =2 c=5 (0.5, 0.5) ([0.01,0.02],[0.14,0.15],[0.83,0.85])
=5
e g =3 c=1 (0.5, 0.5) ([0.02,0.03],[ 0.1 ,0.11],[0.86,0.88])
=5
e g =3 c=2 (0.5, 0.5) ([0.02,0.03],[0.11,0.12],[0.85,0.87])
=5
e g =3 c=3 (0.5, 0.5) ([0.02,0.03],[0.12,0.13],[0.84,0.86])
=5
e g =3 c=4 (0.5, 0.5) ([0.02,0.03],[0.13,0.14],[0.83,0.85])
=5
e g =3 c=5 (0.5, 0.5) ([0.02,0.03],[0.14,0.15],[0.82,0.84])
附表 C- 1 產品族/優先權組合集合（續）
e g c 產品族/優先權組合PFPRe,g,c
=5
e g =4 c=1 (0.5, 0.5) ([0.03,0.04],[ 0.1 ,0.11],[0.85,0.87])
=5
e g =4 c=2 (0.5, 0.5) ([0.03,0.04],[0.11,0.12],[0.84,0.86])
=5
e g =4 c=3 (0.5, 0.5) ([0.03,0.04],[0.12,0.13],[0.83,0.85])
=5
e g =4 c=4 (0.5, 0.5) ([0.03,0.04],[0.13,0.14],[0.82,0.84])
=5
e g =4 c=5 (0.5, 0.5) ([0.03,0.04],[0.14,0.15],[0.81,0.83])
=5
e g =5 c=1 (0.5, 0.5) ([0.04,0.05],[ 0.1 ,0.11],[0.84,0.86])
=5
e g =5 c=2 (0.5, 0.5) ([0.04,0.05],[0.11,0.12],[0.83,0.85])
=5
e g =5 c=3 (0.5, 0.5) ([0.04,0.05],[0.12,0.13],[0.82,0.84])
=5
e g =5 c=4 (0.5, 0.5) ([0.04,0.05],[0.13,0.14],[0.81,0.83])
=5
e g =5 c=5 (0.5, 0.5) ([0.04,0.05],[0.14,0.15],[ 0.8 ,0.82])
=6
e g=1 c=1 (0.6, 0.4) ([ 0 ,0.01],[ 0.1 ,0.11],[0.88, 0.9])
=6
e g=1 c=2 (0.6, 0.4) ([ 0 ,0.01],[0.11,0.12],[0.87,0.89])
=6
e g=1 c=3 (0.6, 0.4) ([ 0 ,0.01],[0.12,0.13],[0.86,0.88])
=6
e g=1 c=4 (0.6, 0.4) ([ 0 ,0.01],[0.13,0.14],[0.85,0.87])
=6
e g=1 c=5 (0.6, 0.4) ([ 0 ,0.01],[0.14,0.15],[0.84,0.86])
=6
e g =2 c=1 (0.6, 0.4) ([0.01,0.02],[ 0.1 ,0.11],[0.87,0.89])
=6
e g =2 c=2 (0.6, 0.4) ([0.01,0.02],[0.11,0.12],[0.86,0.88])
=6
e g =2 c=3 (0.6, 0.4) ([0.01,0.02],[0.12,0.13],[0.85,0.87])
=6
e g =2 c=4 (0.6, 0.4) ([0.01,0.02],[0.13,0.14],[0.84,0.86])
=6
e g =2 c=5 (0.6, 0.4) ([0.01,0.02],[0.14,0.15],[0.83,0.85])
=6
e g =3 c=1 (0.6, 0.4) ([0.02,0.03],[ 0.1 ,0.11],[0.86,0.88])
=6
e g =3 c=2 (0.6, 0.4) ([0.02,0.03],[0.11,0.12],[0.85,0.87])
=6
e g =3 c=3 (0.6, 0.4) ([0.02,0.03],[0.12,0.13],[0.84,0.86])
=6
e g =3 c=4 (0.6, 0.4) ([0.02,0.03],[0.13,0.14],[0.83,0.85])
=6
e g =3 c=5 (0.6, 0.4) ([0.02,0.03],[0.14,0.15],[0.82,0.84])
=6
e g =4 c=1 (0.6, 0.4) ([0.03,0.04],[ 0.1 ,0.11],[0.85,0.87])
=6
e g =4 c=2 (0.6, 0.4) ([0.03,0.04],[0.11,0.12],[0.84,0.86])
=6
e g =4 c=3 (0.6, 0.4) ([0.03,0.04],[0.12,0.13],[0.83,0.85])
=6
e g =4 c=4 (0.6, 0.4) ([0.03,0.04],[0.13,0.14],[0.82,0.84])
=6
e g =4 c=5 (0.6, 0.4) ([0.03,0.04],[0.14,0.15],[0.81,0.83])
=6
e g =5 c=1 (0.6, 0.4) ([0.04,0.05],[ 0.1 ,0.11],[0.84,0.86])
=6
e g =5 c=2 (0.6, 0.4) ([0.04,0.05],[0.11,0.12],[0.83,0.85])
=6
e g =5 c=3 (0.6, 0.4) ([0.04,0.05],[0.12,0.13],[0.82,0.84])
=6
e g =5 c=4 (0.6, 0.4) ([0.04,0.05],[0.13,0.14],[0.81,0.83])
=6
e g =5 c=5 (0.6, 0.4) ([0.04,0.05],[0.14,0.15],[ 0.8 ,0.82])
=7
e g=1 c=1 (0.7, 0.3) ([ 0 ,0.01],[ 0.1 ,0.11],[0.88, 0.9])
=7
e g=1 c=2 (0.7, 0.3) ([ 0 ,0.01],[0.11,0.12],[0.87,0.89])
=7
e g=1 c=3 (0.7, 0.3) ([ 0 ,0.01],[0.12,0.13],[0.86,0.88])
=7
e g=1 c=4 (0.7, 0.3) ([ 0 ,0.01],[0.13,0.14],[0.85,0.87])
附表 C- 1 產品族/優先權組合集合（續）
e g c 產品族/優先權組合PFPRe,g,c
=7
e g=1 c=5 (0.7, 0.3) ([ 0 ,0.01],[0.14,0.15],[0.84,0.86])
=7
e g =2 c=1 (0.7, 0.3) ([0.01,0.02],[ 0.1 ,0.11],[0.87,0.89])
=7
e g =2 c=2 (0.7, 0.3) ([0.01,0.02],[0.11,0.12],[0.86,0.88])
=7
e g =2 c=3 (0.7, 0.3) ([0.01,0.02],[0.12,0.13],[0.85,0.87])
=7
e g =2 c=4 (0.7, 0.3) ([0.01,0.02],[0.13,0.14],[0.84,0.86])
=7
e g =2 c=5 (0.7, 0.3) ([0.01,0.02],[0.14,0.15],[0.83,0.85])
=7
e g =3 c=1 (0.7, 0.3) ([0.02,0.03],[ 0.1 ,0.11],[0.86,0.88])
=7
e g =3 c=2 (0.7, 0.3) ([0.02,0.03],[0.11,0.12],[0.85,0.87])
=7
e g =3 c=3 (0.7, 0.3) ([0.02,0.03],[0.12,0.13],[0.84,0.86])
=7
e g =3 c=4 (0.7, 0.3) ([0.02,0.03],[0.13,0.14],[0.83,0.85])
=7
e g =3 c=5 (0.7, 0.3) ([0.02,0.03],[0.14,0.15],[0.82,0.84])
=7
e g =4 c=1 (0.7, 0.3) ([0.03,0.04],[ 0.1 ,0.11],[0.85,0.87])
=7
e g =4 c=2 (0.7, 0.3) ([0.03,0.04],[0.11,0.12],[0.84,0.86])
=7
e g =4 c=3 (0.7, 0.3) ([0.03,0.04],[0.12,0.13],[0.83,0.85])
=7
e g =4 c=4 (0.7, 0.3) ([0.03,0.04],[0.13,0.14],[0.82,0.84])
=7
e g =4 c=5 (0.7, 0.3) ([0.03,0.04],[0.14,0.15],[0.81,0.83])
=7
e g =5 c=1 (0.7, 0.3) ([0.04,0.05],[ 0.1 ,0.11],[0.84,0.86])
=7
e g =5 c=2 (0.7, 0.3) ([0.04,0.05],[0.11,0.12],[0.83,0.85])
=7
e g =5 c=3 (0.7, 0.3) ([0.04,0.05],[0.12,0.13],[0.82,0.84])
=7
e g =5 c=4 (0.7, 0.3) ([0.04,0.05],[0.13,0.14],[0.81,0.83])
=7
e g =5 c=5 (0.7, 0.3) ([0.04,0.05],[0.14,0.15],[ 0.8 ,0.82])
=8
e g=1 c=1 (0.8, 0.2) ([ 0 ,0.01],[ 0.1 ,0.11],[0.88, 0.9])
=8
e g=1 c=2 (0.8, 0.2) ([ 0 ,0.01],[0.11,0.12],[0.87,0.89])
=8
e g=1 c=3 (0.8, 0.2) ([ 0 ,0.01],[0.12,0.13],[0.86,0.88])
=8
e g=1 c=4 (0.8, 0.2) ([ 0 ,0.01],[0.13,0.14],[0.85,0.87])
=8
e g=1 c=5 (0.8, 0.2) ([ 0 ,0.01],[0.14,0.15],[0.84,0.86])
=8
e g =2 c=1 (0.8, 0.2) ([0.01,0.02],[ 0.1 ,0.11],[0.87,0.89])
=8
e g =2 c=2 (0.8, 0.2) ([0.01,0.02],[0.11,0.12],[0.86,0.88])
=8
e g =2 c=3 (0.8, 0.2) ([0.01,0.02],[0.12,0.13],[0.85,0.87])
=8
e g =2 c=4 (0.8, 0.2) ([0.01,0.02],[0.13,0.14],[0.84,0.86])
=8
e g =2 c=5 (0.8, 0.2) ([0.01,0.02],[0.14,0.15],[0.83,0.85])
=8
e g =3 c=1 (0.8, 0.2) ([0.02,0.03],[ 0.1 ,0.11],[0.86,0.88])
=8
e g =3 c=2 (0.8, 0.2) ([0.02,0.03],[0.11,0.12],[0.85,0.87])
=8
e g =3 c=3 (0.8, 0.2) ([0.02,0.03],[0.12,0.13],[0.84,0.86])
=8
e g =3 c=4 (0.8, 0.2) ([0.02,0.03],[0.13,0.14],[0.83,0.85])
=8
e g =3 c=5 (0.8, 0.2) ([0.02,0.03],[0.14,0.15],[0.82,0.84])
=8
e g =4 c=1 (0.8, 0.2) ([0.03,0.04],[ 0.1 ,0.11],[0.85,0.87])
=8
e g =4 c=2 (0.8, 0.2) ([0.03,0.04],[0.11,0.12],[0.84,0.86])
=8
e g =4 c=3 (0.8, 0.2) ([0.03,0.04],[0.12,0.13],[0.83,0.85])
附表 C- 1 產品族/優先權組合集合（續）
e g c 產品族/優先權組合PFPRe,g,c
=8
e g =4 c=4 (0.8, 0.2) ([0.03,0.04],[0.13,0.14],[0.82,0.84])
=8
e g =4 c=5 (0.8, 0.2) ([0.03,0.04],[0.14,0.15],[0.81,0.83])
=8
e g =5 c=1 (0.8, 0.2) ([0.04,0.05],[ 0.1 ,0.11],[0.84,0.86])
=8
e g =5 c=2 (0.8, 0.2) ([0.04,0.05],[0.11,0.12],[0.83,0.85])
=8
e g =5 c=3 (0.8, 0.2) ([0.04,0.05],[0.12,0.13],[0.82,0.84])
=8
e g =5 c=4 (0.8, 0.2) ([0.04,0.05],[0.13,0.14],[0.81,0.83])
=8
e g =5 c=5 (0.8, 0.2) ([0.04,0.05],[0.14,0.15],[ 0.8 ,0.82])
=9
e g=1 c=1 (0.9, 0.1) ([ 0 ,0.01],[ 0.1 ,0.11],[0.88, 0.9])
=9
e g=1 c=2 (0.9, 0.1) ([ 0 ,0.01],[0.11,0.12],[0.87,0.89])
=9
e g=1 c=3 (0.9, 0.1) ([ 0 ,0.01],[0.12,0.13],[0.86,0.88])
=9
e g=1 c=4 (0.9, 0.1) ([ 0 ,0.01],[0.13,0.14],[0.85,0.87])
=9
e g=1 c=5 (0.9, 0.1) ([ 0 ,0.01],[0.14,0.15],[0.84,0.86])
=9
e g =2 c=1 (0.9, 0.1) ([0.01,0.02],[ 0.1 ,0.11],[0.87,0.89])
=9
e g =2 c=2 (0.9, 0.1) ([0.01,0.02],[0.11,0.12],[0.86,0.88])
=9
e g =2 c=3 (0.9, 0.1) ([0.01,0.02],[0.12,0.13],[0.85,0.87])
=9
e g =2 c=4 (0.9, 0.1) ([0.01,0.02],[0.13,0.14],[0.84,0.86])
=9
e g =2 c=5 (0.9, 0.1) ([0.01,0.02],[0.14,0.15],[0.83,0.85])
=9
e g =3 c=1 (0.9, 0.1) ([0.02,0.03],[ 0.1 ,0.11],[0.86,0.88])
=9
e g =3 c=2 (0.9, 0.1) ([0.02,0.03],[0.11,0.12],[0.85,0.87])
=9
e g =3 c=3 (0.9, 0.1) ([0.02,0.03],[0.12,0.13],[0.84,0.86])
=9
e g =3 c=4 (0.9, 0.1) ([0.02,0.03],[0.13,0.14],[0.83,0.85])
=9
e g =3 c=5 (0.9, 0.1) ([0.02,0.03],[0.14,0.15],[0.82,0.84])
=9
e g =4 c=1 (0.9, 0.1) ([0.03,0.04],[ 0.1 ,0.11],[0.85,0.87])
=9
e g =4 c=2 (0.9, 0.1) ([0.03,0.04],[0.11,0.12],[0.84,0.86])
=9
e g =4 c=3 (0.9, 0.1) ([0.03,0.04],[0.12,0.13],[0.83,0.85])
=9
e g =4 c=4 (0.9, 0.1) ([0.03,0.04],[0.13,0.14],[0.82,0.84])
=9
e g =4 c=5 (0.9, 0.1) ([0.03,0.04],[0.14,0.15],[0.81,0.83])
=9
e g =5 c=1 (0.9, 0.1) ([0.04,0.05],[ 0.1 ,0.11],[0.84,0.86])
=9
e g =5 c=2 (0.9, 0.1) ([0.04,0.05],[0.11,0.12],[0.83,0.85])
=9
e g =5 c=3 (0.9, 0.1) ([0.04,0.05],[0.12,0.13],[0.82,0.84])
=9
e g =5 c=4 (0.9, 0.1) ([0.04,0.05],[0.13,0.14],[0.81,0.83])
=9
e g =5 c=5 (0.9, 0.1) ([0.04,0.05],[0.14,0.15],[ 0.8 ,0.82])
附錄 D 產能篩選後之產品族/優先權組合
附表 D- 1 產能篩選後之產品族/優先權組合集合
e g c 產品族/優先權組合PFPRe,g,c
=3
e g =1 c=1 (0.3, 0.7) ([ 0 ,0.01],[ 0.1 ,0.11],[0.88, 0.9])
=3
e g =1 c=2 (0.3, 0.7) ([ 0 ,0.01],[0.11,0.12],[0.87,0.89])
=3
e g =1 c=3 (0.3, 0.7) ([ 0 ,0.01],[0.12,0.13],[0.86,0.88])
=3
e g =1 c=4 (0.3, 0.7) ([ 0 ,0.01],[0.13,0.14],[0.85,0.87])
=3
e g =1 c=5 (0.3, 0.7) ([ 0 ,0.01],[0.14,0.15],[0.84,0.86])
=3
e g =2 c=1 (0.3, 0.7) ([0.01,0.02],[ 0.1 ,0.11],[0.87,0.89])
=3
e g =2 c=2 (0.3, 0.7) ([0.01,0.02],[0.11,0.12],[0.86,0.88])
=3
e g =2 c=3 (0.3, 0.7) ([0.01,0.02],[0.12,0.13],[0.85,0.87])
=3
e g =2 c=4 (0.3, 0.7) ([0.01,0.02],[0.13,0.14],[0.84,0.86])
=3
e g =2 c=5 (0.3, 0.7) ([0.01,0.02],[0.14,0.15],[0.83,0.85])
=4
e g =1 c=1 (0.4, 0.6) ([ 0 ,0.01],[ 0.1 ,0.11],[0.87,0.89])
=4
e g =1 c=2 (0.4, 0.6) ([ 0 ,0.01],[0.11,0.12],[0.87,0.89])
=4
e g =1 c=3 (0.4, 0.6) ([ 0 ,0.01],[0.12,0.13],[0.86,0.88])
=4
e g =1 c=4 (0.4, 0.6) ([ 0 ,0.01],[0.13,0.14],[0.85,0.87])
=4
e g =1 c=5 (0.4, 0.6) ([ 0 ,0.01],[0.14,0.15],[0.84,0.86])
=4
e g =2 c=1 (0.4, 0.6) ([0.01,0.02],[ 0.1 ,0.11],[0.87,0.89])
=4
e g =2 c=2 (0.4, 0.6) ([0.01,0.02],[0.11,0.12],[0.86,0.88])
=4
e g =2 c=3 (0.4, 0.6) ([0.01,0.02],[0.12,0.13],[0.85,0.87])
=4
e g =2 c=4 (0.4, 0.6) ([0.01,0.02],[0.13,0.14],[0.84,0.86])
=4
e g =2 c=5 (0.4, 0.6) ([0.01,0.02],[0.14,0.15],[0.83,0.85])
=4
e g =3 c=1 (0.4, 0.6) ([0.02,0.03],[ 0.1 ,0.11],[0.86,0.88])
=4
e g =3 c=2 (0.4, 0.6) ([0.02,0.03],[0.11,0.12],[0.85,0.87])
=4
e g =3 c=3 (0.4, 0.6) ([0.02,0.03],[0.12,0.13],[0.84,0.86])
=4
e g =3 c=4 (0.4, 0.6) ([0.02,0.03],[0.13,0.14],[0.83,0.85])
=4
e g =3 c=5 (0.4, 0.6) ([0.02,0.03],[0.14,0.15],[0.82,0.84])
=4
e g =4 c=1 (0.4, 0.6) ([0.03,0.04],[ 0.1 ,0.11],[0.85,0.87])
=4
e g =4 c=2 (0.4, 0.6) ([0.03,0.04],[0.11,0.12],[0.84,0.86])
=4
e g =4 c=3 (0.4, 0.6) ([0.03,0.04],[0.12,0.13],[0.83,0.85])
=4
e g =4 c=4 (0.4, 0.6) ([0.03,0.04],[0.13,0.14],[0.82,0.84])
=4
e g =4 c=5 (0.4, 0.6) ([0.03,0.04],[0.14,0.15],[0.81,0.83])
=5
e g =1 c=1 (0.5, 0.5) ([ 0 ,0.01],[ 0.1 ,0.11],[0.88, 0.9])
=5
e g =1 c=2 (0.5, 0.5) ([ 0 ,0.01],[0.11,0.12],[0.87,0.89])
=5
e g =1 c=3 (0.5, 0.5) ([ 0 ,0.01],[0.12,0.13],[0.86,0.88])
=5
e g =1 c=4 (0.5, 0.5) ([ 0 ,0.01],[0.13,0.14],[0.85,0.87])
=5
e g =1 c=5 (0.5, 0.5) ([ 0 ,0.01],[0.14,0.15],[0.84,0.86])
=5
e g =2 c=1 (0.5, 0.5) ([0.01,0.02],[ 0.1 ,0.11],[0.87,0.89])
=5
e g =2 c=2 (0.5, 0.5) ([0.01,0.02],[0.11,0.12],[0.86,0.88])
附表 D- 1 產能篩選後之產品族/優先權組合集合（續）
e g c 產品族/優先權組合PFPRe,g,c
=5
e g =2 c=4 (0.5, 0.5) ([0.01,0.02],[0.13,0.14],[0.84,0.86])
=5
e g =2 c=5 (0.5, 0.5) ([0.01,0.02],[0.14,0.15],[0.83,0.85])
=5
e g =3 c=1 (0.5, 0.5) ([0.02,0.03],[ 0.1 ,0.11],[0.86,0.88])
=5
e g =3 c=2 (0.5, 0.5) ([0.02,0.03],[0.11,0.12],[0.85,0.87])
=5
e g =3 c=3 (0.5, 0.5) ([0.02,0.03],[0.12,0.13],[0.84,0.86])
=5
e g =3 c=4 (0.5, 0.5) ([0.02,0.03],[0.13,0.14],[0.83,0.85])
=5
e g =3 c=5 (0.5, 0.5) ([0.02,0.03],[0.14,0.15],[0.82,0.84])
=5
e g =4 c=1 (0.5, 0.5) ([0.03,0.04],[ 0.1 ,0.11],[0.85,0.87])
=5
e g =4 c=2 (0.5, 0.5) ([0.03,0.04],[0.11,0.12],[0.84,0.86])
=5
e g =4 c=3 (0.5, 0.5) ([0.03,0.04],[0.12,0.13],[0.83,0.85])
=5
e g =4 c=4 (0.5, 0.5) ([0.03,0.04],[0.13,0.14],[0.82,0.84])
=5
e g =4 c=5 (0.5, 0.5) ([0.03,0.04],[0.14,0.15],[0.81,0.83])
=5
e g =5 c=1 (0.5, 0.5) ([0.04,0.05],[ 0.1 ,0.11],[0.84,0.86])
=5
e g =5 c=2 (0.5, 0.5) ([0.04,0.05],[0.11,0.12],[0.83,0.85])
=5
e g =5 c=3 (0.5, 0.5) ([0.04,0.05],[0.12,0.13],[0.82,0.84])
=5
e g =5 c=4 (0.5, 0.5) ([0.04,0.05],[0.13,0.14],[0.81,0.83])
=5
e g =5 c=5 (0.5, 0.5) ([0.04,0.05],[0.14,0.15],[ 0.8 ,0.82])
=6
e g=1 c=1 (0.6, 0.4) ([ 0 ,0.01],[ 0.1 ,0.11],[0.88, 0.9])
=6
e g=1 c=2 (0.6, 0.4) ([ 0 ,0.01],[0.11,0.12],[0.87,0.89])
=6
e g=1 c=3 (0.6, 0.4) ([ 0 ,0.01],[0.12,0.13],[0.86,0.88])
=6
e g=1 c=4 (0.6, 0.4) ([ 0 ,0.01],[0.13,0.14],[0.85,0.87])
=6
e g=1 c=5 (0.6, 0.4) ([ 0 ,0.01],[0.14,0.15],[0.84,0.86])
=6
e g =2 c=1 (0.6, 0.4) ([0.01,0.02],[ 0.1 ,0.11],[0.87,0.89])
=6
e g =2 c=2 (0.6, 0.4) ([0.01,0.02],[0.11,0.12],[0.86,0.88])
=6
e g =2 c=3 (0.6, 0.4) ([0.01,0.02],[0.12,0.13],[0.85,0.87])
=6
e g =2 c=4 (0.6, 0.4) ([0.01,0.02],[0.13,0.14],[0.84,0.86])
=6
e g =2 c=5 (0.6, 0.4) ([0.01,0.02],[0.14,0.15],[0.83,0.85])
=6
e g =3 c=1 (0.6, 0.4) ([0.02,0.03],[ 0.1 ,0.11],[0.86,0.88])
=6
e g =3 c=2 (0.6, 0.4) ([0.02,0.03],[0.11,0.12],[0.85,0.87])
=6
e g =3 c=3 (0.6, 0.4) ([0.02,0.03],[0.12,0.13],[0.84,0.86])
=6
e g =3 c=4 (0.6, 0.4) ([0.02,0.03],[0.13,0.14],[0.83,0.85])
=6
e g =3 c=5 (0.6, 0.4) ([0.02,0.03],[0.14,0.15],[0.82,0.84])
=6
e g =4 c=1 (0.6, 0.4) ([0.03,0.04],[ 0.1 ,0.11],[0.85,0.87])
=6
e g =4 c=2 (0.6, 0.4) ([0.03,0.04],[0.11,0.12],[0.84,0.86])
=6
e g =4 c=3 (0.6, 0.4) ([0.03,0.04],[0.12,0.13],[0.83,0.85])
=6
e g =4 c=4 (0.6, 0.4) ([0.03,0.04],[0.13,0.14],[0.82,0.84])
=6
e g =4 c=5 (0.6, 0.4) ([0.03,0.04],[0.14,0.15],[0.81,0.83])
=6
e g =5 c=1 (0.6, 0.4) ([0.04,0.05],[ 0.1 ,0.11],[0.84,0.86])
=6
e g =5 c=2 (0.6, 0.4) ([0.04,0.05],[0.11,0.12],[0.83,0.85])
附表 D- 1 產能篩選後之產品族/優先權組合集合（續）
e g c 產品族/優先權組合PFPRe,g,c
=6
e g =5 c=3 (0.6, 0.4) ([0.04,0.05],[0.12,0.13],[0.82,0.84])
=6
e g =5 c=4 (0.6, 0.4) ([0.04,0.05],[0.13,0.14],[0.81,0.83])
=6
e g =5 c=5 (0.6, 0.4) ([0.04,0.05],[0.14,0.15],[ 0.8 ,0.82])
=7
e g =1 c=1 (0.7, 0.3) ([ 0 ,0.01],[ 0.1 ,0.11],[0.88, 0.9])
=7
e g =1 c=2 (0.7, 0.3) ([ 0 ,0.01],[0.11,0.12],[0.87,0.89])
=7
e g =1 c=3 (0.7, 0.3) ([ 0 ,0.01],[0.12,0.13],[0.86,0.88])
=7
e g =1 c=4 (0.7, 0.3) ([ 0 ,0.01],[0.13,0.14],[0.85,0.87])
=7
e g =1 c=5 (0.7, 0.3) ([ 0 ,0.01],[0.14,0.15],[0.84,0.86])
=7
e g =2 c=1 (0.7, 0.3) ([0.01,0.02],[ 0.1 ,0.11],[0.87,0.89])
=7
e g =2 c=2 (0.7, 0.3) ([0.01,0.02],[0.11,0.12],[0.86,0.88])
=7
e g =2 c=3 (0.7, 0.3) ([0.01,0.02],[0.12,0.13],[0.85,0.87])
=7
e g =2 c=4 (0.7, 0.3) ([0.01,0.02],[0.13,0.14],[0.84,0.86])
=7
e g =2 c=5 (0.7, 0.3) ([0.01,0.02],[0.14,0.15],[0.83,0.85])
=7
e g =3 c=1 (0.7, 0.3) ([0.02,0.03],[ 0.1 ,0.11],[0.86,0.88])
=7
e g =3 c=2 (0.7, 0.3) ([0.02,0.03],[0.11,0.12],[0.85,0.87])
=7
e g =3 c=3 (0.7, 0.3) ([0.02,0.03],[0.12,0.13],[0.84,0.86])
=7
e g =3 c=4 (0.7, 0.3) ([0.02,0.03],[0.13,0.14],[0.83,0.85])
=7
e g =3 c=5 (0.7, 0.3) ([0.02,0.03],[0.14,0.15],[0.82,0.84])
=7
e g =4 c=1 (0.7, 0.3) ([0.03,0.04],[ 0.1 ,0.11],[0.85,0.87])
=7
e g =4 c=2 (0.7, 0.3) ([0.03,0.04],[0.11,0.12],[0.84,0.86])
=7
e g =4 c=3 (0.7, 0.3) ([0.03,0.04],[0.12,0.13],[0.83,0.85])
=7
e g =4 c=4 (0.7, 0.3) ([0.03,0.04],[0.13,0.14],[0.82,0.84])
=7
e g =4 c=5 (0.7, 0.3) ([0.03,0.04],[0.14,0.15],[0.81,0.83])
=7
e g =5 c=1 (0.7, 0.3) ([0.04,0.05],[ 0.1 ,0.11],[0.84,0.86])
=7
e g =5 c=2 (0.7, 0.3) ([0.04,0.05],[0.11,0.12],[0.83,0.85])
=7
e g =5 c=3 (0.7, 0.3) ([0.04,0.05],[0.12,0.13],[0.82,0.84])
=7
e g =5 c=4 (0.7, 0.3) ([0.04,0.05],[0.13,0.14],[0.81,0.83])
=7
e g =5 c=5 (0.7, 0.3) ([0.04,0.05],[0.14,0.15],[ 0.8 ,0.82])
附錄 E 產能篩選後之產品族/優先權組合之定價關鍵資源分攤運轉成本(計畫 產出利用率 95%)
附表E- 1 定價關鍵資源分攤運轉成本分析表∗
產品族/優先權
c g
PFPRe, , （e,g,c） 分析項目 工作站
=46 W
工作站
=24 W
工作站
=29 W
工作站
=61 W
實際使用機台數 11.2546 - 2.1258 0.5445
轉運成本分攤權重 0.8083 - 0.1526 0.0391
(3,1,1)
轉運成本（單位：美元） 6.8522 - 5.4628 5.4097
實際使用機台數 11.2546 - 2.1258 0.5445
轉運成本分攤權重 0.8083 - 0.1526 0.0391
(3,1,2)
轉運成本（單位：美元） 6.8522 - 5.4628 5.4097
實際使用機台數 11.2546 - 2.1258 0.5445
轉運成本分攤權重 0.8083 - 0.1526 0.0391
(3,1,3)
轉運成本（單位：美元） 6.8522 - 5.4628 5.4097
實際使用機台數 11.2546 - 2.1258 0.5445
轉運成本分攤權重 0.8083 - 0.1526 0.0391
(3,1,4)
轉運成本（單位：美元） 6.8522 - 5.4628 5.4097
實際使用機台數 11.2546 - 2.1258 0.5445
轉運成本分攤權重 0.8083 - 0.1526 0.0391
(3,1,5)
轉運成本（單位：美元） 6.8522 - 5.4628 5.4097
實際使用機台數 11.2546 - 2.2321 0.5445
轉運成本分攤權重 0.8021 - 0.1591 0.0388
(3,2,1)
轉運成本（單位：美元） 6.8003 - 5.6925 5.3687
實際使用機台數 11.2546 - 2.2321 0.5445
轉運成本分攤權重 0.8021 - 0.1591 0.0388
(3,2,2)
轉運成本（單位：美元） 6.8003 - 5.6925 5.3687
實際使用機台數 11.2546 - 2.2321 0.5445
轉運成本分攤權重 0.8021 - 0.1591 0.0388
(3,2,3)
轉運成本（單位：美元） 6.8003 - 5.6925 5.3687
實際使用機台數 11.2546 - 2.2321 0.5445
轉運成本分攤權重 0.8021 - 0.1591 0.0388
(3,2,4)
轉運成本（單位：美元） 6.8003 - 5.6925 5.3687
實際使用機台數 11.2546 - 2.2321 0.5445
轉運成本分攤權重 0.8021 - 0.1591 0.0388
(3,2,5)
轉運成本（單位：美元） 6.8003 - 5.6925 5.3687
∗ 由於附錄 E 之資料過於龐大，因此本文僅附上 e=3~5 之產品族/優先權組合之資料。
附表E- 1 定價關鍵資源分攤運轉成本分析表∗（續）
產品族/優先權
c g
PFPRe, ,（e,g,c） 分析項目 工作站
=46 W
工作站
=24 W
工作站
=29 W
工作站
=61 W
實際使用機台數 11.2546 - - -
轉運成本分攤權重 1 - - -
(4,1,1)
轉運成本（單位：美元） 8.4776 - - -
實際使用機台數 11.2546 - - -
轉運成本分攤權重 1 - - -
(4,1,2)
轉運成本（單位：美元） 8.4776 - - -
實際使用機台數 11.2546 - - -
轉運成本分攤權重 1 - - -
(4,1,3)
轉運成本（單位：美元） 8.4776 - - -
實際使用機台數 11.2546 - - -
轉運成本分攤權重 1 - - -
(4,1,4)
轉運成本（單位：美元） 8.4776 - - -
實際使用機台數 11.2546 - - -
轉運成本分攤權重 1 - - -
(4,1,5)
轉運成本（單位：美元） 8.4776 - - -
實際使用機台數 11.2546 - - -
轉運成本分攤權重 1 - - -
(4,2,1)
轉運成本（單位：美元） 8.4776 - - -
實際使用機台數 11.2546 - - -
轉運成本分攤權重 1 - - -
(4,2,2)
轉運成本（單位：美元） 8.4776 - - -
實際使用機台數 11.2546 - - -
轉運成本分攤權重 1 - - -
(4,2,3)
轉運成本（單位：美元） 8.4776 - - -
實際使用機台數 11.2546 - - -
轉運成本分攤權重 1 - - -
(4,2,4)
轉運成本（單位：美元） 8.4776 - - -
實際使用機台數 11.2546 - - -
轉運成本分攤權重 1 - - -
(4,2,5)
轉運成本（單位：美元） 8.4776 - - -
實際使用機台數 11.2546 - 2.1491 -
轉運成本分攤權重 0.8396 - 0.1603 -
(4,3,1)
轉運成本（單位：美元） 7.1183 - 5.7383 -
附表E- 1 定價關鍵資源分攤運轉成本分析表∗（續）
產品族/優先權
c g
PFPRe, ,（e,g,c） 分析項目 工作站
=46 W
工作站
=24 W
工作站
=29 W
工作站
=61 W
實際使用機台數 11.2546 - 2.1491 -
轉運成本分攤權重 0.8396 - 0.1603 -
轉運成本分攤權重 0.8396 - 0.1603 -