第五章 實驗結果討論與數值模擬之比較
6.3 本研究達成之目標
1. 模具加熱冷卻機構可應用於局部結合線的消除，不需要對整組模具進行 加熱，也能夠得到外觀無結合線的塑膠射出成型產品。
2. 模內沖模機構可應用於添加金屬粉末塑料之射出成型。
3. 應用於嵌入成形的模具加熱機構可以改善嵌入件成形後的產品破壞問 題；加熱滑塊可以在不改變產品外觀與模具機構下，提昇產品的局部強 度。
4. 熱處理實驗可以改善殘留應力問題，實驗中得到的研究數據可供後續研 究者或是產品製造人員作為參考依據。
參 考 文 獻
[1] 周文祥譯，C-MOLD 射出成形模具設計，新文京開發出版有限公司，
119-134 頁，民國九十七年。
[2] C-MOLD, C-MOLD Design Guide A Resource for Plastics Engineers, Third Edition, C-MOLD, Ithaca, New York, USA, 1998.
[3] T. Nguyen-Chung, G. Mennig, M. Boyanova, S.Fakirov and F.J. Balta Calleja, “ Effect of an Obstacle During Processing on the Weld Line of Injection-Molded Glassy Polystyrene: Microhardness Study ”, Journal of Applied Polymer Science, Vol.92, pp.3362-3367, 2004.
[4] I. S. Dairanieh, A. Haufe, H. J. Wolf and G. Mennig, “Computer Simulation of Weld Lines in Injection Molded Poly (Methyl Methacrylate ) ”, Polymer Engineering and Science, Vol.36, No.15, pp.2050-2057, 1996.
[5] S. Hashemi, “Effect of Temperature on Weldline Integrity of Injection Moulded Short Glass Fibre and Glass Bead Filled ABS Hybrids”, Polymer Testing, Vol.29, Issue 3, pp.327-336,2010.
[6] N. Mekhilef, A. Ait-Kadi and A. Ajji, “Weld Lines in Injection-Moulded Immiscible Blends: Model Predictions and Experimental Results”, Polymer, Vol.36, Issue 10.,pp.2033-2042,1995.
[7] N. Merah, M. Irfan-ul-Haq and Z. Khan, “Temperature and Weld-line Effects on Mechanical Properties of CPVC”, Journal of Materials Processing Technology, Vol.142, Issue 1, pp.247-255, 2003.
[8] S. Guo, A. Ait-Kadi and M. Bousmina , “A Modified Model Predictions and Experimental Results of Weld-line Strength in Injection Molded PS/PMMA Blends”, Polymer, Vol.45, pp.2911-2920, 2004.
[9] R. Seldén, “Effect of processing on weld line strength in five thermoplastics”,
Polymer Engineering and Science, Vol.37 Issue 1, pp.205-218, 2004.
[10] G. Menges, W. Michael and P. Mohren, How to make injection mold (3rd), Carl Hanser Verlag, Munich, pp.288-299, 2001.
[11] T. Asano, T. Kankl, N. Sano, J. Fujikawa and S. Haruna, “Development of Vacuum Injection Molding System With Purifier for Environment Protection”, Sustaniable Energy and Environmental Technologies, pp.94-98, 2000.
[12] S. Fellahi, A. Meddad, B. Fisa and B.D. Favis, “Weldlines in Injection -Molded Parts: A Review”, Advances in Polymer Technology, Vol. 14, No.3, pp.169-195, 1995.
[13] S.C. Chen, H.S. Peng, J.A. Chang and W.R. Jong, “Simulations and Verifications of Induction Heating On a Mold Plate”, International Communications in Heat and Mass Transfer, Vol.31, Issue 7, pp.971-980, 2004.
[14] D. Yao, M. Chen, B. Kim, “Development of Rapid Heating and Cooling Mold Inserts Comprising A Heating Layer An Insulation and Substrate”, SPE ANTEC Tech. Paper, pp.704-708, 2001.
[15] D. H. Kim, M.H. Kan and Y. H. Chun, “Development of A Notebook PC Housing by Using MMSH (Momentary Mold Surface Heating) Process”, SPE ANTEC Tech. Paper, pp.3347-3350, 2001.
[16] Ono Sangyo Co., Ltd., Tokyo, “Mold Device for Injection Molding of Synthetic Resin”, United States Patent, Patent No.: US 6,752,612, 2004.
[17] A. I. Isayev and D. L. Crouthamel, “Residual Stresses Development in The Injection Molding of Polymers,” Polym. Plast. Technol. Eng., Vol. 22, pp.177-232, 1984.
[18] 黄峡宏，余敏强，周持兴，「聚合物注塑残余应力研究进展」，力学进 展(Advences in Mechanics)，Vol.30, No.2, pp.272-282, 2000。
[19] S. C. Chen and Y. C. Chen, “Calculations of the Flow-induced Residual Stress Development in the Injection Moulded Plate”, Computers &
Structures, Vol. 52, No5, pp. 1043-1050, 1994.
[20] X. Chen, Y.C. Lam and D.Q. Li, “Analysis of Thermal Residual Stress in Plastic Injection Molding”, Journal of Materials Processing Technology, Vol.101, Issues 1-3, pp.275-280, 2000.
[21] O. Denizart, M. Vincent and J. F. Agassant, “Thermal Stresses and Strains in Injection Moulding: Experiments and Computations”, Journal of Materials Science, Vol.30, pp.552-560, 1995.
[22] S.Y. Yang and M.Z. Ke, “Influence of Processing on Quality of Injection- Compression-Molded Disks”, Polymer Engineering and Science, Vol.35, pp.1206-1212, 1995.
[23] 王 泯 玟 ，「 淺 談 超 高 速 射 出 成 形 技 術 」， 機 械 工 業 雜 誌 技 術 專 刊 , pp.106-113, 民國八十九年。
[24] M. Thomas and J. R. White, “The Effect of a Temperature Gradient on Residual Stresses and Distortion in Injection Molding”, Polymer Engineering and Science, Vol.24, No.4, pp.227-241, 1984.
[25] S. Choi and L. J. Broutrnan, “Residual Stress in Plastic Pipes and Fittings IV. Effect of Annealing on Deformation and Fracture Properties”, Polymer(Korea), Vol.21, No.1, pp.93-102,1997.
[26] B. S. Thakkar and L. J. Broutman, “Impact Strength of Polymers.3: The Effect of Annealing on Cold Worked Polycarbonates”, Polymer
Engineering and Science, Vol.21, No.3, pp.155-162, 1981.
[27] F. Yang, A. Wang and Y. Zhang, “Analysis and Control of Internal Stress in Shell and Cover of Plastic Alkaline Storage Battery”, Engineering Plastics Application, Vol.33, pp.37-43, 2005.
[28] 川田株式會社，“ECOMAK”，IPF 2002，川田株式會社，2002。
[29] 蔡毓斌，「模具設計合理化」，模仁科技股份有限公司，民國九十四年。
[30] International Mold Steel, Inc., http://www.imsteel.com/pdf/porcerax.pdf.
[31] Sumitomo (SHI) Demag, http://www.sumitomo-shi-demag.eu/solutions/
injection_compression_moulding/.
[32] 宋玉恒，塑料注射模具设计实用手册，航空工业出版社，38-175 頁，
1994。
[33] H. Rees, Mold Engineering, Carl Hanser Verlag, pp.169-245, 2002.
[34] 蔡毓斌, “射出成形模具之加熱冷卻裝置”,中華民國新型專利 M295582, 民國九十五年。
[35] 林道燊，「均熱板於資訊產品散熱之應用」，COMPOTECH Asia 電子與 電腦雜誌繁體中文版，民國九十七年。
[36] Celsia, http://www.celsiatechnologies.com/nanospreader_technology.asp.
[37] H. Hojo, H. Masumori, Y. Kageyama and T. Takahashi, “Shearing of Thermoplastic Polymer Sheets at Room Temperature”, Journal of the Japan Society for Technology of Plasticity, Vol. 9, No.88, pp.304-313, 1968.
[38] 鳴滝朋，コストダウンのための射出成形不良の原因と対策，シグマ 出版社，pp，151-180，1999。
[39] 郭振彬，張建安，熊秉傑，實用塑膠模設計與製造，徐氏基金會，10-50 頁，民國八十五年。
[40] W. L. Krueger and Z. Tadmor, “Injection Molding into a Rectangular Cavity with Inserts”, Polymer Engineering and Science, Vol. 20, No. 6, pp.426-431, 1980.
[41] Battenfeld GmbH, “Bonding of Plastics”, NPE 2000, Battenfeld GmbH, 2000.
[42] Advanced Polymer Alloys/ Division of Ferro Corporation, Guide To Overmolding With Melt Processible Elastomers (MPEs), Advanced Polymer Alloys/ Division of Ferro Corporation, APA Overmolding Guide, pp.4-6, 2006.
[43] Toray Engineering Co., 3D TIMON Extreme Suite 2008 / 3D TIMON-INSERT Manual, Toray Engineering Co., pp.3-23, 2008.
[44] 蔡毓斌，徐瑞坤，蘇嘉宏，「嵌入成型製程之殘留應力與嵌入成型件破 壞之研究」，台灣區模具工業同業公會 模具技術與論文發表會，民國 九十五年。
[45] J. Rotheiser, Joining of Plastics Handbook for Designers and Engineers, Carl Hanser Verlag GmbH & Co. kG, pp.316-327, 2004.
[46] GLS Corporation, Overmolding Guide, GLS Corporation, pp.6-9, 2004.
[47] N. Mekhilef, A. Ait-Kadi, and A. Ajji, “Effect of Processing Conditions on Mechanical Properties of Polycarbonate-Polyethylene Blends”, 49th Annual Technical Conference-ANTEC'91, Vol. 37, pp.1118-1123, 1991.
[48] N. Merah, M. Irfan-ul-Haq and Z. Khan, “Temperature and Weld-line Effects on Mechanical Properties of CPVC”, Journal of Materials
Processing Technology, Vol.142, Issue 1, pp.247-255, 2003.
[49] 蔡毓斌, 「加熱裝置」, 中華民國新型專利 M351142, 民國九十八年 [50] P. J. Withers and H. K. D. H. Bhadeshia, “Overview Residual Stress Part
1 – Measurement Techniques”, Materials Science and Technology, Vol.17, pp.355-365, 2001.
[51] R.G. Treuting and W.T.Read,Jr., “A Mechanical Determination of Biaxial Residual Stress in Sheet Materials”, Journal of Applied Physics, Vol.22, No.2, pp.130-134, 1951.
[52] J. Mathar, “Determination of Initial Stresses by Measuring the Deformation Around Drilled Holes”,Transactions of The ASME, Vol.4, pp.249-254,1934.
[53] Y. Niitsu, K. Ichinose and K. Gomi, “Experimental Stress Analysis of Stressed Glass Plate by Shear Difference Method and Laser Photoelasticity”, The Japan Society of Mechanical Engineers, No.97-0852, pp.696-702, 1998.
[54] A. Bagchi, P. K. Wright, “Stress Analysis in Machining with the Use of Sapphire Tools”, Proceedings of the Royal Society of London. Series A, Mathematical and Physical Sciences, Vol. 409, No. 1836, pp. 99-113, 1987.
[55] 黃忠良，「精密剪斷加工」，復漢出版社，民國九十一年。
[56] 燦達電子工業股份有限公司，http://www.hr-connector.com.tw/。
[57] Master Tool Co. Inc., http://www.mastertoolusa.com/insert_molding.htm.
[58] Tapecon Inc., http://www.tapecon.com.
[59] 蔡毓斌，「NPE 2000 的回顧」，歐磊科技股份有限公司，民國八十九年。
[60] 泓崴科技有限公司，「3D TIMON 軟體簡介 – 嵌入成形模組」，3D
TIMON 簡介，民國九十四年。
[61] Flow Science, Inc., FLOW-3D User Manual Version 9.0, Flow Science, Inc., 2006.
[62] Toray Engineering Co., Ltd., 3D TIMON Extreme Suite Reference Manual, pp.8-16, 2008.
[63] Y.P. Tsai, J.C. Wang and R.Q. Hsu, “The Effect of Vapor Chamber in an Injection Molding Process on Part Tensile Strength ”, Experimental Techniques, 2010.
[64] Tsai, Y.P. , A.T. Lee and R.Q. Hsu, “A Study on the Heating and Cooling Cycle System via Vapor Chamber in Injection Molding Process”, Annual Technical Conference - ANTEC, Conference Proceedings, Vol.4, pp 2510-2513, 2007.
[65] Y.P. Tsai, J.C. Wang; T.Y. Huang and R.Q. Hsu, “The Effects of Rotor Incorporated Mold for the Elimination of the Welding Line in Injection Molding”, SPE ANTEC Tech. Paper, Vol.3, pp1578-1581, 2008.
[66] 蔡毓斌，黃大益，徐瑞坤，「添加金屬粉末之塑膠射出成型研究」，
FLOW-3D 台灣使用者大會 論文發表會，民國九十五年。
[67] Y.P. Tsai, C.F. Hsu and R.Q. Hsu, “Study on the In-Mold Punching of the Thermoplastic Injection Molding”, SPE ANTEC Conference Proceedings, Vol.5, pp.2986-2990, 2009.
[68] 胡偉強，徐瑞坤，「潛水用呼吸調節器之分析與改良」，國立交通大學 碩士論文，民國九十六年。
[69] P. Wolfinger, SCUBA Regulator Ssvvy,A division of Peter Built Co.,Galion,Ohio,USA, 2004.
[70] M. J. Gordon Jr., Industrial Design of Plastics Products, pp.159-175, John Wiley & Sons, Inc., 2003.
[71]國立交通大學機械工程學系 材料物性與成形實驗室，「材料輕量化計 畫」，產學合作計畫（台灣山葉機車工業股份有限公司），民國九十五 年。
[72] Y.P. Tsai, J.J. Wei and R.Q. Hsu, “The Research of Reduce Residual Stress of Polycarbonate Products by Heat Treatment”, Annual Technical Conference - ANTEC, Conference Proceedings, Vol.4, pp 2051-2055, 2009.